2AVYXWS068G18000KEY ASM-DR LK & IGN LK

Smart key manual 2 1 As shown in the figure above, first press the release switch on the key, and then pull out the mechanical key After use, insert the mechanical key back. Name: Smart key Model: WS068G1-8000 Brand: SGMW Transmission frequency-high frequency: 434.4MHz 2.3V~3.3V Effective transmission distance: 20M, 360-degree hemispherical area. Working temperature: -20°C~60°C button indicator light is red : Lock key. Press once to lock all doors. : Unlock key. Press once to unlock all doors. : Tailgate open key. Press to unlock the tailgate. ① ②， ≥ FCC ID:2AVYXWS068G18000 FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. · If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter. RF exposure warning

SAIC GM Wuling Automobile Co., Ltd. * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter 6/2/2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2AVYXWS068G18000 Per section 2.911(d)(7) of the FCC rules, SAIC GM Wuling Automobile Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process: Company Name: FCC US Agent, LLC FRN: 0033402884 Physical U.S. Company Address: 3722 Illinois Avenue Saint Charles, IL 60174 United States Agent name: Tim Payne Agent Email Address: [email protected] The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: OR Agent Signed: Signed: Signed: Printed name: Jiantao Yan Printed name: Tim Payne Title: Engineering Director Title: Manager Company Name: SAIC GM Wuling Automobile Co., Ltd. Company Name: FCC US Agent, LLC Date: 6/2/2023 Date: 6/2/2023

SAIC GM Wuling Automobile Co., Ltd. No.18 Hexi Road Liuzhou City, Guangxi Zhuang Autonomous Region, China Covered Equipment Certification Attestation Letter 6/2/2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2AVYXWS068G18000 SAIC GM Wuling Automobile Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. SAIC GM Wuling Automobile Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Jiantao Yan Title: Engineering Director Company Name: SAIC GM Wuling Automobile Co., Ltd. Date: 6/2/2023

SAIC GM Wuling Automobile Co., Ltd. 7/10/2023 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: 2AVYXWS068G18000 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules and FCC Guidance document 726920, we hereby request confidential treatment of information accompanying this application as outlined below: PERMANENT LONG-TERM CONFIDENTIALITY: Schematics Block Diagrams Operation Description BOM When the device is marketed before the requested number of days listed above, the grantee will inform the TCB to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. The above information contains trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Sincerely, Signed: Printed name: Jiantao Yan Title: Engineering Director

SAIC GM Wuling Automobile Co., Ltd. 6/2/2023 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 Antenna Statement - FCC FCC ID: 2AVYXWS068G18000 We SAIC GM Wuling Automobile Co., Ltd. Declare that only radiated measurements are used to show compliance with FCC limits for fundamental and spurious emissions. So there is no antenna specification used. Please don’t hesitate to contact me if you have any questions. Sincerely, Signed: Printed name: Jiantao Yan Title: Engineering Director

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 22C0151R-RF-External Photo Page 1 / 3 External Photographs EUT Photo(1) EUT Photo(2) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 22C0151R-RF-External Photo Page 2 / 3 EUT Photo(3) EUT Photo(4) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 22C0151R-RF-External Photo Page 3 / 3 EUT Photo(5) EUT Photo(6)

KEY ASM-DR LK&IGN LK Model:WS068G1-8000 FCC ID:2AVYXWS068G18000 Input：3V Made In China

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 22C0151R-RF-Internal Photo Page 1 / 3 Internal Photographs EUT Photo(1) EUT Photo(2) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 22C0151R-RF-Internal Photo Page 2 / 3 EUT Photo(3) EUT Photo(4) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 22C0151R-RF-Internal Photo Page 3 / 3 EUT Photo(5) EUT Photo(6)-Antenna

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 22C0151R-RF-US-P20V01 FCC Exposure TEST REPORT Product Name KEY ASM-DR LK & IGN LK Trademark SGMW Model and /or type reference WS068G1-8000 FCC ID 2AVYXWS068G18000 Applicant ́s name / address SAIC GM WULING AUTOMOBILE COMPANY LIMITED 18th,Hexi Road,Liuzhou City, Guangxi Zhuang Autonomous Region, China Test method requested, standard FCC 47CFR §2.1093 Verdict Summary IN COMPLIANCE Documented by (name / position & signature) Tim Cao/ Project Engineer Approved by (name / position & signature) Jack Zhang/ Manager Date of issue 2023-07-03 Report Version V1.1 Report template No Template_FCC-MPE-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 22C0151R-RF-US-P20V01 Page 2 / 9 INDEX page Competences and Guarantees ............................................................................................................................. 3 General conditions ............................................................................................................................................... 3 Environmental conditions ..................................................................................................................................... 3 Possible test case verdicts ................................................................................................................................... 4 Abbreviations ....................................................................................................................................................... 4 Document History ................................................................................................................................................ 5 Remarks and Comments ..................................................................................................................................... 5 1 General Information .................................................................................................................................... 6 1.1 General Description of the Item(s) ..................................................................................................... 6 1.2 Antenna Information .......................................................................................................................... 7 2 RF Exposure Evaluation .............................................................................................................................. 8 2.1 Limits ................................................................................................................................................ 8 2.2 Test Procedure ................................................................................................................................. 8 2.3 Test Result of RF Exposure Evaluation ............................................................................................. 9 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 22C0151R-RF-US-P20V01 Page 3 / 9 COMPETENCES AND GUARANTEES DEKRA is a testing laboratory competent to carry out the tests described in this report. In order to assure the traceability to other national and international laboratories, DEKRA has a calibration and maintenance program for its measurement equipment. DEKRA guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated in the report and it is based on the knowledge and technical facilities available at DEKRA at the time of performance of the test. DEKRA is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA. GENERAL CONDITIONS Test Location No. 99, Hongye Road, Suzhou Industrial Park Suzhou, 215006, P.R. China Date(receive sample) Dec. 08, 2022 Date (start test) Dec. 20, 2022 Date (finish test) Feb. 25, 2023 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or Competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA. ENVIRONMENTAL CONDITIONS The climatic conditions during the tests are within the limits specified by the manufacturer for the operation of the EUT and the test equipment. The climatic conditions during the tests were within the following limits: Ambient temperature 15 °C – 35 °C Relative Humidity air 30% - 60% If explicitly required in the basic standard or applied product / product family standard the climatic values are recorded and documented separately in this test report. DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 22C0151R-RF-US-P20V01 Page 4 / 9 POSSIBLE TEST CASE VERDICTS Test case does not apply to test object N/A Test object does meet requirement P (Pass) / PASS Test object does not…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 22C0151R-RF-US-P06V01 FCC TEST REPORT Product Name KEY ASM-DR LK & IGN LK Trademark SGMW Model and /or type reference WS068G1-8000 FCC ID 2AVYXWS068G18000 Applicant ́s name / address SAIC GM WULING AUTOMOBILE COMPANY LIMITED 18th,Hexi Road,Liuzhou City, Guangxi Zhuang Autonomous Region, China Test method requested, standard CFR 47, FCC Part 15 C ANSI C63.10: 2013 Verdict Summary IN COMPLIANCE Testedby (name / position & signature) Tim Cao/ Project Engineer Approved by (name / position & signature) Jack Zhang/ Manager Date of issue 2023-07-03 Report Version V1.1 Report template No Template_FCC 15.231-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 22C0151R-RF-US-P06V01 Page 2 / 31 INDEX page General conditions ...................................................................................................................................................... 4 Environmental conditions ............................................................................................................................................ 4 Possible test case verdicts .......................................................................................................................................... 5 Abbreviations .............................................................................................................................................................. 5 Document History ....................................................................................................................................................... 6 Remarks and Comments ............................................................................................................................................. 6 Used Equipment ......................................................................................................................................................... 7 Uncertainty ................................................................................................................................................................. 8 1 General Information............................................................................................................................................ 9 1.1 General Description of the Item(s) ............................................................................................................ 9 1.2 Antenna Information ............................................................................................................................... 10 1.3 Channel List ........................................................................................................................................... 11 2 Description of Test Setup ................................................................................................................................. 12 2.1 Operating mode(s) used for tests ............................................................................................................ 12 2.2 Auxiliary equipment / Test software for the EUT ...................................................................................... 12 2.3 Test Configuration / Block diagram used for tests ................................................................................... 13 2.4 Testing process ...................................................................................................................................... 13 3 Verdict summary section .................................................................................................................................. 14 3.1 Standards............................................................................................................................................... 14 3.2 Deviation(s) from the Standard(s) / Test Specification(s) ......................................................................... 14 3.3 Overview of results ................................................................................................................................. 15 3.4 Test Facility ............................................................................................................................................ 16 4 Test Results ..................................................................................................................................................... 17 4.1 Field strength of fundamental ................................................................................................................. 17 4.1.1 Limit ............................................................................................................................................. 17 4.1.2 Test Setup .................................................................................................................................... 18 4.1.3 Test Procedure ............................................................................................................................. 18 4.2 Field strength of spurious emissions ....................................................................................................... 19 4.2.1 Limit ............................................................................................................................................. 19 4.2.2 Test Setup .................................................................................................................................... 21 4.2.3 Test Procedure ............................................................................................................................. 21 4.3 DTS Bandwidth ......................................…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 22C0151R-RF-FCC-Setup Photo Page 1 / 1 Setup Photographs Description: Radiated emission(Below 1G) Description: Radiated emission(1-18G)