2AW2R-RSR101Rokid Station Remote

User Manual Rokid Station Remote Pairing method: 1. Place the bluetooth remote within 30cm of the Rokid Station. 2. Press and hold the "Back" + "APPS" buttons for 3 seconds. The indicator light will flash. This indicates the bluetooth remote has entered "pairing mode". Press the button to wake up Google Assistant and engage in voice interaction with the device. 1. After you press the VOICE button, the microphone starts recording. The indicator light will remain on during the recording session. 2. Speak a command, and press the Voice button again to end the recording. Bluetooth Pairing Google Assistant When the remote power is low, the indicator light will flash fast while you are using it. When you stop pressing any buttons on the remote, the indicator light flashes quickly for three seconds and then goes out. Low Power Indicator 3. After the remote is successfully paired, the indicator light flashes twice slowly and then goes out. When you use the product for the first time, you need to buy two AAA batteries by yourself. Slide off the battery compartment cover on the back of the remote. Insert the batteries you bought and start using the remote. Install the Battery Safety PrecautionLegal Notice 1. Please keep the device dry. Do not use it in a dusty, dirty, humid, or high-salinity environment (such as beach, seaside). This may cause the circuit failure in the device. 2. Do not use the device during a thunderstorm. The thunderstorms can cause the malfunction of device and increase the risk of electric shock. 3. Please use the device within its approved operating temperature range from 32°F (0°C) to 95°F (+35°C) of altitude, and keep it within its approved storage temperature range from -4°F (-20°C) to 113°F (+45°C). The environment with extreme temperature may damage the device. 4. Do not disassemble or modify the equipment, insert foreign matters, or immerse in water or other liquids. 5. Do not allow children or pets to chew or suck the device or its accessories. Doing so may result in the damages. 6. Using an unapproved or incompatible charger, adapter or battery may cause a fire, explosion, or other dangers. 7. The device and its accessories may contain the small components. Keep them out of the reach of children, who may damage them by mistake or swallow these small components, which may lead to the dangers such as choking. *Copyright ©Lingban Technology 2014 ~ 2023. All rights reserved. This document is for reference purposes only and does not constitute any form of commitment. The visual representation of the product here is indicative only. If there is any inconsistency, the actual product shall govern. * Read this entire document carefully before using this product to understand your legal rights, responsibilities and safety instructions. Failure to read and follow the instructions and warnings in this document may result in property damage, safety accidents, and personal safety hazards. By using this product, you hereby signify that you have read this disclaimer carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. You agree to use this product only for purposes that are proper and in accordance with all terms, any relevant policies and guidelines that Lingban Technology has made and may make available. * Lingban Technology accepts no liability for damages, injury or any legal responsibility incurred directly or indirectly from the use of this product. Rokid Station Remote User Manual ペアリング方法： 1. リモコンをRokid Stationの30センチの範囲に置く。 2.「戻る」ボタンと「アプリ」ボタンを3秒間長押しします。インジケ タライトが点滅します。これは、リモコンがペアリングモドに入 っていることを示します。 このボタンを押すと、Googleアシスタントを起動してデバイスと音 声対話を行うことができます。 1.音声ボタンを押すと、マイクが録音を開始します。録音中は、イン ジケタライトが点灯したままになります。 2.声でコマンドを伝え、もう一度音声ボタンを押して録音を終了しま す。 Bluetoothペアリング Googleアシスタント リモトの残量が少ない場合、使用中にインジケタライトが速 く点滅します。 リモコンのボタンを離すと、インジケタライトが3秒間速く点 滅してから消灯します。 低電力インジケタ 3.リモコンが正常にペアリングされると、インジケタライト がゆっくりと2回点滅してから消灯します。 本製品を初めて使用する際には、ご自分で単4電池を2本購入す る必要があります。 リモコンの背面にあるバッテリコンパトメントカバをス ライドして外します。購入した電池を入れると、リモコンを使 い始めることができます。 バッテリの取り付け 安全上のご注意法的通知 1.本製品を濡らさないでください。ほこり、汚れ、湿気、塩分の多い環境（砂浜や海辺な ど）で使用しないでください。こうした環境下では本機の内部回路に障害が発生する恐れ があります。 2.雷雨の天候時は使用しないでください。雷雨はデバイスの故障の原因となる恐れがあり 、感電の危険性が高まります。 3.本デバイスは、定格動作温度範囲である0°C (32°F)～+35°C (95°F) の高度で使用し、定格 保管温度範囲である-20°C (-4°F)～+45°C (113°F) で保管してください。極端な温度環境では 、本製品が破損する恐れがあります。 4.本機を分解改造したり、異物を入れたり、水や液体に浸さないでください。 5.お子様やペットが本体や付属品を噛んだり吸ったりしないようご注意ください。破損の 原因となります。 6.未認可であったり互換性のない充電器、アダプタ、バッテリを使用すると、火災や 爆発などの危険が生じる恐れがあります。 7.本機とその付属品には小さな部品が含まれている場合があります。誤って破損させたり、 小さな部品を飲み込んだ場合、窒息などが発生する危険がありますので、お子様の手の届 かないところに保管してください。 * Copyright ©Lingban Technology 2014 ～ 2023。All rights reserved.本書は単なる参考として提 供されており、いかなる形式の義務も発生しません。本書内の製品の画像表示は、あくまでも 目安です。実際の表示と異なる場合は、実際の製品が優先されます。 * 本製品を使用する前に、本書全文を熟読し、法的権利、責任、および安全に関する注意事項を 理解してください。本書に記載の指示や警告を読まなかったり従わなかった場合、物的損害、 安全に関する事故、人身事故が発生する可能性があります。本製品を使用することにより、本 免責事項を熟読し、本書に記載の条件を理解し、遵守することに同意したと見なされます。お 客様は、本製品を使用している間のご自身の行為、およびその結果に関して、全ての責任を負 うことに同意するものとします。お客様は、本製品を適切な目的のみに使用し、Lingban Technologyが作成し公表したあらゆる条件、関連方針ならびにガイドラインに従って使用する ことに同意するものとします。 * Lingban Technologyでは、本製品の使用によって直接または間接的に発生した損害、怪我、 法的責任について一切責任を負いません。 Einleiten des Kopplungsvorgangs: 1. Platzieren Sie die Fernbedienung innerhalb von 30 cm von der Rokid Station. 2. Halten Sie die Tasten „Zurück“ und „App-Übersicht aufrufen“ drei Sekunden lang gedrückt. Die LED-Statusanzeige beginnt daraufhin zu blinken. Dies zeigt an, dass die Bluetooth-Fernbedienung in den "Kopplungsmodus" eingetreten ist. Drücken Sie die Taste, um Google Assistant zu wecken und Sprachinteraktionen mit dem Gerät durchzuführen. 1. Nachdem Sie die Taste „Sprachsteuerung aktivieren/deaktivieren“ gedrückt haben, beginnt das Mikrofon mit der Aufnahme Ihrer Stimme. Die LED-Statu- sanzeige leuchtet während der Sprachaufnahme durchgehend. 2. Äußern Sie nun einen Befehl und drücken Sie die Taste „Sprachsteuerung aktivieren/deaktivieren“ …

Text truncated - open the document above for the full version.

THREE STONES MEDIA LLC U.S. Agent Letter 。f Attestation T。：Federalc。mmunicationsC。『nmission 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Attestation Statement - Part2.911 ( d)(7) filing FCC ID: 2AW2R-RSR101 Date: 06-14-2023 Hangzhou LingBan Technology Co., LTD. ("the applicant") certifies that, as of the date of the filing of the application, THREE STONES MEDIA LLC( “ the agent ” ） is our designated U.S. agent for service of p「ocessfor the abovereference FCC ID. The applicant accepts to maintain an agent for service of p「ocessin the United States forno less than one year after either the grantee has permanently terminated all marketing and importation of theapplicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicialproceeding involving the equipme时，whicheveris later. The applicant fu「ther acknowledges it is our「esponsibilityto inform the FCC whenever the agent information changes. THREE STONES MEDIA LLC （ ” the agent) understand it is the agent ’ s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Desi!:mated U.S. Aaent Company Name: THREE STONES MEDIA LLC FRN: 0033401761 GC: 2A99E Address: Signatur e: 1200 Broadway St. APT 329, Los Angeles, CA90015 Contact Person: Sijie Zhang Tel: +1 267 909 3692 Email: [email protected] Applicant Company Name: Hangzhou LingBan Technology Co., LTD. ” ＂ I Address: Room 101, Building 8, No.1288, Liangmu Signature: J [;l,V\--L 7 Road, Cangqian Street, Yuhang District, Hangzhou, Zhejiang, China Contact Person: Jun Li Tel: 18768576640 Email: jun.li2021＠「okid.com

ATTACHMENT PHOTOGRAPHS OF EUT Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6

Product name：Rokid Station Remote Model: RSR101 input: 2.2-3.6V FCC ID:2AW2R-RSR101 IC: 28518-RSR101 Manufacturer: HIMEDIA TECHNOLOGY LIMITE D Product name：Rokid Station Remote Model: RSR101 input: 2.2-3.6V FCC ID:2AW2R-RSR101 IC: 28518-RSR101 Manufacturer: HIMEDIA TECHNOLOGY LIMITED 48.50 mm 28.00 mm

ATTACHMENT PHOTOGRAPHS OF EUT Photo 1 Photo 2 Photo 3 Photo 4 BT ANT Photo 5

FCC ID: 2AW2R-RSR101 Portable device According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB447498 D01 General RF Exposure Guidance V06 The 1-g SAR and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHZ)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f(GHZ) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. BT: Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion 2.402 -1.18 0.76-2±1-10.79<50.246223.00YES 2.440 -2.12 0.61-2±1-10.79<50.248163.00YES 2.480 -2.76 0.53-2±1-10.79<50.250183.00YES BLE Conclusion: For the max result : 0.25018 ≤ 3.0 for 1g SAR, SAR is not required. Signature: Date: 2023-06-26 NAME AND TITLE (Please print or type): Alex li /Manager COMPANY (Please print or type): Shenzhen NTEK Testing Technology Co., Ltd./ 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen P.R. China.

Antenna Specification Specifications Summary ITEMSPEC. Model Name ISM 2.4 GHz Center Frequency 2400 MHz 2450 MHz 2500 MHz 1.92 dBi 1.58 dBi 0.49 dBi MAX. GAIN 1.92 dBi PolarizationHorizontal Azimuth Beam Pattern Omni-directional Impedance50Ω Antenna Length 10.35 mm Antenna Photo & Length Wu xi Weida Intelligent Electronics Co., Ltd 1.Main antenna : 2400 MHz 1.1 Horizontal 1.2 Vertical 2.Main antenna : 2450 MHz 2.1 Horizontal 2.2 Vertical 3.Main antenna : 2500 MHz 3.1 Horizontal 3.2 Vertical 4. Result Center Frequency Maximum Ant Gain H 1.92 dBi 2400 MHz V -9.19 dBi H 1.58 dBi 2450 MHz V -9.64 dBi H 0.49 dBi 2500 MHz V -11.5 dBi

Report No.: S23051102101001 Version.1.3 Page 1 of 51 RADIO TEST REPORT FCC ID: 2AW2R-RSR101 Product: Rokid Station Remote Trade Mark: Rokid Model No.: RSR101 Family Model: N/A Report No.: S23051102101001 Issue Date: May 25, 2023 Prepared for Hangzhou LingBan Technology Co., LTD. Room 101, Building 8, No.1288, Liangmu Road, Cangqian Street, Yuhang District, Hangzhou, Zhejiang, China Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen 518126 P.R. China Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Report No.: S23051102101001 Version.1.3 Page 2 of 51 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 4 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 5 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 6 3.1 FACILITIES..................................................................................................................................................... 6 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 6 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 6 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 7 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 9 6 SETUP OF EQUIPMENT UNDER TEST ......................................................................................................... 10 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ..................................................................... 10 6.2 SUPPORT EQUIPMENT ............................................................................................................................... 11 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 12 7 TEST REQUIREMENTS .................................................................................................................................... 13 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 13 7.1.1 Applicable Standard .................................................................................................................... 13 7.1.2 Conformance Limit ...................................................................................................................... 13 7.1.3 Measuring Instruments ................................................................................................................ 13 7.1.4 Test Configuration ....................................................................................................................... 13 7.1.5 Test Procedure ............................................................................................................................ 13 7.1.6 Test Results ................................................................................................................................. 14 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 15 7.2.1 Applicable Standard .................................................................................................................... 15 7.2.2 Conformance Limit ...................................................................................................................... 15 7.2.3 Measuring Instruments ................................................................................................................ 16 7.2.4 Test Configuration ....................................................................................................................... 16 7.2.5 Test Procedure ............................................................................................................................ 17 7.2.6 Test Results ................................................................................................................................. 18 7.3 6DB BANDWIDTH ....................................................................................................................................... 24 7.3.1 Applicable Standard .................................................................................................................... 24 7.3.2 Conformance Limit ...................................................................................................................... 24 7.3.3 Measuring Instruments ................................................................................................................ 24 7.3.4 Test Setup ................................................................................................................................... 24 7.3.5 Test Procedure ............................................................................................................................ 24 7.3.6 Test Results ................................................................................................................................. 24 7.4 DUTY CYCLE ............................................................................................................................................... 25 7.4.1 Applicable Standard .................................................................................................................... 25 7.4…

Text truncated - open the document above for the full version.

Radiated Measurement Photos