2AW7S706Z3G Tablet

Radiation Exposure Statement The device has been tested and comply with FCC SAR limits.

Shenzhen Digidragon Technology Co., Ltd Address: F02-3, Block 36, Dayun Software Town, Longgang District, Shenzhen, China. Tel: 0755-27901651 Email: [email protected] QA- FR-170-B 7/29/2014 FCC Authorization Date: 2020-08-12 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We Shenzhen Digidragon Technology Co.,Ltd, the undersigned, hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Jackie Lei General manager

Shenzhen Digidragon Technology Co., Ltd Address: F02-3, Block 36, Dayun Software Town, Longgang District, Shenzhen, China. Tel: 0755-27901651 Email: [email protected] FCC Confidential Authorization Date: 2020-08-12 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AW7S706Z In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Shenzhen Digidragon Technology Co., Ltd, hereby requests long-term confidential treatment of information accompanying this application as outlined below: •Block Diagram •Schematics •Operation Description •Parts List/Tune up procedure (for licensed devices) The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Jackie Lei General manager

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200826563-RF Page 1 of 5 EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200826563-RF Page 2 of 5 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200826563-RF Page 3 of 5 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200826563-RF Page 4 of 5 Adapter Adapter Label Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200826563-RF Page 5 of 5

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200826563-RF EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200826563-RF Page 1 of 5 EXHIBIT C - EUT INTERNAL PHOTOGRAPHS GSM/WCDMA antenna Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200826563-RF Page 2 of 5 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200826563-RF Page 3 of 5 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200826563-RF Page 4 of 5 Bluetooth& Wi-Fi antenna Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200826563-RF Page 5 of 5

Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. BACL is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. SAR TEST REPORT For Shenzhen Digidragon Technology Co., Ltd Block 36, Dayun Software Town, Longgang District, Shenzhen, China. FCC ID: 2AW7S706Z Report Type: Original Report Product Type: 3G Tablet Report Number: RSZ200826563-SA Report Date: 2020/09/27 Reviewed By: Yates Li SAR En gineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F., West Wing, Third Phase of Wanli Industrial Building, Shihua Road, Futian Free Trade Zone, Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563-SA SAR Evaluation Report 2 of 45 Attestation of Test Results EUT Information EUT Description 3G Tablet Tested Model 706Z FCC ID 2AW7S706Z Serial Number RSZ200826563-SA-S1 Test Date 2020/09/15 to 2020/09/16 MODE Max. SAR Level(s) Reported(W/kg) Limit (W/kg) GSM 850 1g Head SAR 0.01 1. 6 1g Body SAR 0.21 PCS 1900 1g Head SAR 0.03 1g Body SAR 1.28 WCDMA Band 2 1g Head SAR 0.02 1g Body SAR 0.91 WCDMA Band 5 1g Head SAR 0.01 1g Body SAR 0.18 Simultaneous TX 1g Body SAR 1.54 1g Body SAR 1.54 (Hotspot) Applicable Standards FCC 47 CFR part 2.1093 Radiofrequency radiation exposure evaluation: portable devices IEEE1528:2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques IEC 62209-2:2010 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices-Human models, instrumentation, and procedures-Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) IEC 62209-1:2016 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) KDB procedures KDB 447498 D01 General RF Exposure Guidance v06 KDB 648474 D04 Handset SAR v01r03 KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04 KDB 865664 D02 RF Exposure Reporting v01r02 KDB 941225 D01 3G SAR Procedures v03r01 KDB 941225 D06 Hotspot Mode v02r01 KDB 248227 D01 802.11 Wi-Fi SAR v02r02 KDB 616217 D04 SAR for laptop and tablets v01r02 Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate (SAR) for General Population/Uncontrolled Exposure limits specified in FCC 47 CFR part 2.1093 and has been tested in accordance with the measurement procedures specified in IEEE 1528-2013 and RF exposure KDB procedures. The results and statements contained in this report pertain only to the device(s) evaluated. Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563-SA SAR Evaluation Report 3 of 45 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 4 EUT DESCRIPTION ................................................................................................................................................... 5 TECHNICAL SPECIFICATION ......................................................................................................................................... 5 REFERENCE, STANDARDS, AND GUIDELINES ................................................................................................. 6 SAR LIMITS ................................................................................................................................................................ 7 FACILITIES ................................................................................................................................................................. 8 DESCRIPTION OF TEST SYSTEM .......................................................................................................................... 9 EQUIPMENT LIST AND CALIBRATION ............................................................................................................. 15 EQUIPMENTS LIST & CALIBRATION INFORMATION ................................................................................................... 15 SAR MEASUREMENT SYSTEM VERIFICATION ............................................................................................. 16 LIQUID VERIFICATION ............................................................................................................................................... 16 SYSTEM ACCURACY VERIFICATION .......................................................................................................................... 17 SAR SYSTEM VALIDATION DATA .................................................................................................................... 18 EUT TEST STRATEGY AND METHODOLOGY ................................................................................................. 20 TEST POSITIONS FOR DEVICE OPERATING NEXT TO …

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 1 of 21 APPENDIX B CALIBRATION CERTIFICATES Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 2 of 21 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 3 of 21 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 4 of 21 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 5 of 21 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 6 of 21 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 7 of 21 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 8 of 21 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 9 of 21 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 10 of 21 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 11 of 21 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 12 of 21 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 13 of 21 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 14 of 21 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 15 of 21 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 16 of 21 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 17 of 21 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 18 of 21 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 19 of 21 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 20 of 21 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 21 of 21

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563-SA Page 1 of 22 Test Plot 1#: GSM 850_Head Flat_Middle DUT: 3G Tablet; Type: 706Z; Serial:RSZ200826563-SA-S1; Communication System: UID 0, Generic GSM (0); Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.929 S/m; ε r = 41.836; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7522; ConvF(9.92, 9.92, 9.92) @ 836.6 MHz;  Sensor-Surface: 4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1562; Calibrated: 3/3/2020  Phantom: SAM-Twin V8.0 P1aP2a; Type: QD 000 P41 AA ; Serial: 1962  Measurement SW: DASY52, Version 52.10 (2); Head Flat/GSM 850 Mid/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 m. Maximum value of SAR (interpolated) = 0.0125 W/kg Head Flat/GSM 850 Mid/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 2.823 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.0130 W/kg SAR(1 g) = 0.012 W/kg; SAR(10 g) = 0.012 W/kg Maximum value of SAR (measured) = 0.0130 W/kg 0 dB = 0.0130 W/kg = -18.86 dBW/kg Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563-SA Page 2 of 22 Test Plot 2#: GSM 850_Body Worn Back_Middle DUT: 3G Tablet; Type: 706Z; Serial:RSZ200826563-SA-S1; Communication System: UID 0, Generic GSM (0); Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.929 S/m; ε r = 41.836; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7522; ConvF(9.92, 9.92, 9.92) @ 836.6 MHz;  Sensor-Surface: 4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1562; Calibrated: 3/3/2020  Phantom: SAM-Twin V8.0 P1aP2a; Type: QD 000 P41 AA ; Serial: 1962  Measurement SW: DASY52, Version 52.10 (2); Body Worn Back/GSM 850 Mid/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.201 W/kg Body Worn Back/GSM 850 Mid/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 10.69 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 0.388 W/kg SAR(1 g) = 0.206 W/kg; SAR(10 g) = 0.118 W/kg Maximum value of SAR (measured) = 0.235 W/kg 0 dB = 0.235 W/kg = -6.29 dBW/kg Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563-SA Page 3 of 22 Test Plot 3#: GSM 850_Body Back_Middle DUT: 3G Tablet; Type: 706Z; Serial:RSZ200826563-SA-S1; Communication System: UID 0, Generic GPRS-4 slots (0); Frequency: 836.6 MHz;Duty Cycle: 1:2 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.929 S/m; ε r = 41.836; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7522; ConvF(9.92, 9.92, 9.92) @ 836.6 MHz;  Sensor-Surface: 4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1562; Calibrated: 3/3/2020  Phantom: SAM-Twin V8.0 P1aP2a; Type: QD 000 P41 AA ; Serial: 1962  Measurement SW: DASY52, Version 52.10 (2); Body Back/GSM 850 Mid/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.199 W/kg Body Back/GSM 850 Mid/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 10.31 V/m; Power Drift = 0.18 dB Peak SAR (extrapolated) = 0.317 W/kg SAR(1 g) = 0.186 W/kg; SAR(10 g) = 0.108 W/kg Maximum value of SAR (measured) = 0.210 W/kg 0 dB = 0.210 W/kg = -6.78 dBW/kg Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563-SA Page 4 of 22 Test Plot 4#: GSM 850_Body Right_Middle DUT: 3G Tablet; Type: 706Z; Serial:RSZ200826563-SA-S1; Communication System: UID 0, Generic GPRS-4 slots (0); Frequency: 836.6 MHz;Duty Cycle: 1:2 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.929 S/m; ε r = 41.836; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7522; ConvF(9.92, 9.92, 9.92) @ 836.6 MHz;  Sensor-Surface: 4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1562; Calibrated: 3/3/2020  Phantom: SAM-Twin V8.0 P1aP2a; Type: QD 000 P41 AA ; Serial: 1962  Measurement SW: DASY52, Version 52.10 (2); Body Right/GSM 850 Mid/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.0290 W/kg Body Right/GSM 850 Mid/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.960 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 0.0430 W/kg SAR(1 g) = 0.029 W/kg; SAR(10 g) = 0.022 W/kg Maximum value of SAR (measured) = 0.0302 W/kg 0 dB = 0.0302 W/kg = -15.20 dBW/kg Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563-SA Page 5 of 22 Test Plot 5#: GSM 850_Body Bottom_Middle DUT: 3G Tablet; Type: 706Z; Serial:RSZ200826563-SA-S1; Communication System: UID 0, Generic GPRS-4 slots (0); Frequency: 836.6 MHz;Duty Cycle: 1:2 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.929 S/m; ε r = 41.836; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7522; ConvF(9.92, 9.92, 9.92) @ 836.6 MHz;  Sensor-Surface: 4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1562; Calibrated: 3/3/2020  Phantom: SAM-Twin V8.0 P1aP2a; Type: QD 000 P41 AA ; Serial: 1962  Measurement SW: DASY52, Version 52.10 (2); Body Bottom/GSM 850 Mid/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.143 W/kg Body Bottom/GSM 850 Mid/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 10.37 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 0.233 W/kg SAR(1 g) = 0.136 W/kg; SAR(10 g) = 0.083 W/kg Maximum value of SAR (measured) = 0.154 W/kg 0 dB = 0.154 W/kg = -8.12 dBW/kg Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563-SA Page 6 of 22 Test Plot 6#: PCS 1900_Head Flat_Middle DUT: 3G Tablet; Type: 706Z; Serial:RSZ200826563-SA-S1; Communication System: UID 0, Generic GSM (0); Frequency: 1880 MHz;Duty Cycle: 1:8 Medium…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 1 of 3 APPENDIX B EUT TEST POSITION PHOTOS Liquid depth ≥ 15cm • Phantom: SAM-Twin V8.0 P1aP2a; Type: QD 000 P41 AA ; Serial: 1962 Body (Worn) Back Setup Photo (0mm) Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 2 of 3 Body Bottom Setup Photo (0mm) Body Right Setup Photo (0mm) Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563- SA Page 3 of 3 Head Left Cheek Setup Photo (0mm) Head Flat Setup Photo (71mm) 74mm 74mm

Note: This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. BACL is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. FCC PART 22H, PART 24E MEASUREMENT AND TEST REPORT For Shenzhen Digidragon Technology Co., Ltd F02-3, Block 36, Dayun Software Town, Longgang District, Shenzhen, China. FCC ID: 2AW7S706Z Report Type: Original Report Product Type: 3G Tablet Re port Number: RSZ200826563-00D Re port Date: 2020-10-21 Reviewed B y: Nancy Wang RF En gineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F., West Wing, Third Phase of Wanli Industrial Building, Shihua Road, Futian Free Trade Zone, Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200826563-00D FCC Part 22H/24E Page 2 of 56 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 3 OBJECTIVE ................................................................................................................................................................... 3 TEST METHODOLOGY .................................................................................................................................................. 3 MEASUREMENT UNCERTAINTY .................................................................................................................................... 4 TEST FACILITY ............................................................................................................................................................. 4 SYSTEM TEST CONFIGURATION .......................................................................................................................... 5 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 5 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 5 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 5 SUMMARY OF TEST RESULTS ............................................................................................................................... 6 TEST EQUIPMENT LIST ........................................................................................................................................... 7 FCC §1.1307(B) & §2.1093 - RF EXPOSURE INFORMATION .............................................................................. 9 APPLICABLE STANDARD .............................................................................................................................................. 9 TEST RESULT ............................................................................................................................................................... 9 FCC §2.1047 - MODULATION CHARACTERISTIC ............................................................................................ 10 FCC § 2.1046, § 22.913 (A) & § 24.232 (C) - RF OUTPUT POWER ...................................................................... 11 APPLICABLE STANDARD ............................................................................................................................................ 11 TEST PROCEDURE ...................................................................................................................................................... 11 TEST DATA ................................................................................................................................................................ 11 FCC §2.1049, §22.917, §22.905 & §24.238 - OCCUPIED BANDWIDTH ............................................................. 18 APPLICABLE STANDARD ............................................................................................................................................ 18 TEST PROCEDURE ...................................................................................................................................................... 18 TEST DATA ................................................................................................................................................................ 18 26 DB EMISSIONS & 99% OCCUPIED BANDWIDTH FOR RMC (BPSK) MODE, MIDDLE CHANNEL ............................. 23 FCC §2.1051, §22.917(A) & §24.238(A) - SPURIOUS EMISSIONS AT ANTENNA TERMINALS .................. 33 APPLICABLE STANDARD ............................................................................................................................................ 33 TEST PROCEDURE ...................................................................................................................................................... 33 TEST DATA ............................................................…

Text truncated - open the document above for the full version.