2AW8C-LJCM39M39

M39 Module Datasheet Document version: 20210511 HANGZHOU LIJIACHENG ELECTRIC CO., LTD. 18 19 i contents 7Module MOQ and packaging information 8Appendix: Statement 1.1 c h a r a c t e r i s t i c ..... . . . . . . . . . . . . . . . . . . . . . . . 1.2A pp l i c a t i o n f i e l d. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 V e r s i o n u p d a t e i n s t r u c t i o n s. . . . . . . . . . . . . . . . . . . . 2.1 S i z e p a c k a g e. . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2P i n d e f i n i t i o n. . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3T e s t p o i n t d e f i n i t i o n. . . . . . . . . . . . . . . . . . . . . . 5Antenna information 2 Module interface 3Electrical parameters 1product description HANGZHOU LIJIACHENG ELECTRIC CO., LTD. 6.1 M e c h a n i c a l D i m e n s i o n s. . . . . . . . . . . . . . . . . . . 6.2P C B p a c k a g e d r a w i n g - p i n. . . . . . . . . . . . . . . . . 6.3P r o d u c t i o n g u i d e. . . . . . . . . . . . . . . . . . . . . . . . 6.4R e c o m m e n d e d f u r n a c e t e m p e r a t u r e c u r v e. . . 1 1 1 2 3 3 4 5 7 7 7 7 8 9 9 9 10 11 11 11 12 12 13 14 15 17 4.1B a s i c R F c h a r a c t e r i s t i c s. . . . . . . . . . . . . . . 4.2E m i s s i o n p e r f o r m a n c e. . . . . . . . . . . . . . . . . . . . . . . . . . 3.1A b s o l u t e e l e c t r i c a l p a r a m e t e r s. . . . . . . . . . . . . . . 3.2 N o r m a l w o r k i n g c o n d i t i o n s . . . . . . . . . . . . . . . . . . . . . 3.3P o w e r c o n s u m p t i o n d u r i n g c o n t i n u o u s t r a n s m i s s i o n a n d r e c e p t i o n. . . . . . . . . . . . . 3.4W o r k i n g c u r r e n t. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4RF parameters 6.5S t o r a g e c o n d i t i o n s. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3 R e c e i v i n g p e r f o r m a n c e. . . . . . . . . . . . . . . . . . . . . . . . . 5.1 A n t e n n a t y p e. . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2 R e d u c e a n t e n n a i n t e r f e r e n c e. . . . . . . . . . . . . . . . . 6Packaging information and production guidance 1 / 20 •Built-in low-power 32-bit CPU, which can double as an application processor •Peripherals：5×GPIOs •Operating Voltage：3.3±0.3V 1product description 1.2Application field •Smart Home/Home Appliances •Smart sockets, smart lights •Wi-Fi Connecti vity – 802.11 b/g/n – p a s s a g e w a y 1 [email protected] – Supp ort WPA/WP A2 securi ty mode – M a x i m u m i n 8 0 2 . 1 1 b m o d e +18dBm output power – Supp ort STA/AP/STA+ AP worki ng mode – Supp ort SmartConfig and AP two network configuration methods (inclding Android and IOS devices) – PCB onboar d antenna, antenna gai 1.2dBi – Operati ng temperature -20 to 105 •BLE Connectivity – Support bl uetoothV 4.2 – M a x i m u m o u t p u t p o w e r +4dBm –PCB onboard antenna, antenna gain 1.2dBi •Smart building HANGZHOU LIJIACHENG ELECTRIC CO., LTD. M39 is a low-power embedded Wi-Fi module developed by Huayulian Technology. It consists of a highly integrated radio frequency core It is composed of BK7231T and a small number of peripheral devices, built-in Wi-Fi network protocol stack and rich library functions. M39 built-in low power consumption 32-bit MCU, 2Mbyte flash memory, 256KB SRAM and abundant peripheral resources. M39 is a function library equipped with RTOS platform that integrates all Wi-Fi MAC and TCP/IP protocols. Users can develop embedded Wi-Fi products that meet their needs based on these 。 1.1characteristic •b a s i c f r e q u e n c y s u p p o r t:120MHz 1 1 2021-05-11 V1.0.0 2 / 20 •Industrial wireless control •Baby Monitor •Webcam •Smart bus 1.3 Version update instructions Serial numberUpdate dateUpdate contentUpdated version New document HANGZHOU LIJIACHENG ELECTRIC CO., LTD. product description 2 3 / 20 M39 has 2 rows of pinsThe pin spacing is 2.0 ± 0.1mmM39 size24. 0 ± 0.35mm (W)×16.0± 0.35mm (L) ×0.8± 0.15mm (H) M3 9 Dimensions 2Module interface 2.1 s ize-package HANGZHOU LIJIACHENG ELECTRIC CO., LTD. Module interface 2 4 / 20 2.2 Pin definition HANGZHOU LIJIACHENG ELECTRIC CO., LTD. Module interface 2 1 RST 2 ADC I 3 CEM 4 P14 I/O 5 PWM5 I/O 6 PWM4 I/O 7 PWM0 I/O 8 VCC P 9 GND P 10 PWM3 I/O 11 TXD2 I/O 12 P16 I/O 13 PWM2 I/O 14 PWM1 I/O 15 RXD1 I/O 16 TXD1 I/O Module interface Pin number symbol IO type function of IC module （3.3V） HANGZHOU LIJIACHENG ELECTRIC CO., LTD. Note: P stands for power pin, and I/O stands for input and output pins. Reset pin, currently floating ADC, corresponding to P23 of IC valid, pull up by default， Corresponding to CEN of IC Normal IO pin corresponds to IC, P14 Support hardware PWM, corresponding to P26 of IC Support hardware PWM, corresponding to P24 of IC Support hardware PWM Corresponding to P6 of IC Power pin of the module Ground wire, negative pin of the Support hardware PWM Corresponding to P9 of IC S erial port 2， Corresponding to P9 Ordinary IO pin Corresponding to P9 of IC Support hardware PWM， Corresponding to P9 of IC Support hardware PWM， Corresponding to P7of IC Serial port 1 Correspondi ng to P11 of IC of IC Serial port 1 Corresponding to P10 3 Ts -20105 °C VBAT 3.03.6 V TAMB-25°C - 2 KV TAMB-25°C - 0.5 KV Ta -20- 105 °C VBAT 3.03.3 3.6 V VIL -0.3- VCC*0.25 V VIH VCC*0.75 - VCC V VOL - - VCC*0.1 V VoH VCC*0.8 - VCC V Imax - - 12 mA 7 / 20 Electrical parameters 3 Electrical parameters 3.1 Absolute electrical parameters parameterdescriptionMinimumMaximumunit Storage temperature Supply voltage （Mannequin） 3.2Normal working conditions parameterdescription MinimumTypical value Maximum unit working temperature HANGZHOU LIJIACHENG ELECTRIC CO., LTD. Supply voltage IO Low-level output IO Low-level output IO High level input IOHigh level input IODrive current 3.3 Power consumption for continuous transmission and reception Electrostatic discharge voltage Electrostatic discharge voltage （Machine model） 11b 11Mbps +17dBm 354 mA 11g 54Mbps +13.5dBm256 307 mA 11n…

Text truncated - open the document above for the full version.

HANGZHOU LIJIACHENG ELECTRIC CO., LTD. 2021.06.21 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: M39 Trademark: HENGTE Model : M39 FCC ID: 2AW8C-LJCM39 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title : Xianwen Xiong / Product Manager Contact information / address: NO 35 YANGSHAN ROAD,GAOHONG ZONE, HANGZHOU, China

HANGZHOU LIJIACHENG ELECTRIC CO., LTD. 2021.06.21 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title : Xianwen Xiong / Product Manager Contact information / address: NO 35 YANGSHAN ROAD,GAOHONG ZONE, HANGZHOU, China

HANGZHOU LIJIACHENG ELECTRIC CO., LTD FCC Modular Approval Request Rev 3.0 Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021/6/21 Subject; Modular Transmitter Application Company name: HANGZHOU LIJIACHENG ELECTRIC CO., LTD FCC ID: 2AW8C-LJCM39 Dear Sir/Madam, This letter includes the FCC application requirements for Modular Transmitter Approval Request for;- FCC KDB 996369 D01 ‘Module Certification Guide v02; and FCC KDB 996369 D03 OEM Manual v01 In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Equip Auth Guide v02’. FCC ID: 2AW8C-LJCM39 has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 Explanation from Grantee (do not write yes/no, but explain why product complies/how it is achieved) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly. Yes, It has a shield. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. Yes,this module meets the requirements of FCC part 15C(15.247).it specifically establish the 6dB Bandwidth, Peak Output Power, Radiated Spurious Emission, Power Spectral Density, Restricted Band of Operation and Band Edge (Out of Band Emissions) The module must contain power supply regulation on the module. Yes, the module has a power management system. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). Yes, the module contains a permanently connected antenna and operates with a specific antenna. The module must demonstrate compliance in a stand-alone configuration. Yes, module can work independent. The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748). Yes, label will be printed on the Shielding cover. The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. Yes, The module with trace antenna designs, and This manual has been shown the layout of trace design,, antenna, connectors, and isolation requirements. HANGZHOU LIJIACHENG ELECTRIC CO., LTD FCC Modular Approval Request Rev 3.0 The module must comply with RF exposure requirements Yes,This module complies with FCC RF radiation exposure limits set forth for an uncontrolled environment, This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body." This module is designed to comply with the FCC statement, FCC ID: 2AW8C-LJCM39 Integration Instructions for host product manufacturers The following items are submitted in support of application for Modular Transmitter FCC ID as noted above as required by the FCC KDB 996369 D03 OEM Manual v01. These items are provided as integration instructions for host product manufacturers (e.g., OEM instruction manual) to use when integrating a module in a host product. Any requirements that are not applicable to the Module are as indicated below. Summary of requirements and Checklist.Refer to the KDB for description of the complete requirements; KDB Ref Sect Requirements of KDB 996369 D03 User Manual Page Number reference 2.2 List of applicable FCC rules Page 22 2.3 Summarize the specific operational use conditions Page 22 2.4 Limited module procedures Page 22 2.5 Trace antenna designs Page 23 2.6 RF exposure considerations Page 23 2.7 Antennas Page 23 2.8 Label and compliance information Page 24 2.9 Information on test modes and additional testing requirements Page 24 2.10 Additional testing, Part 15 Subpart B disclaimer Page 24 Name: Xianwen Xiong Date: 2021/06/21 Title: Manager Signature of applicant :

External Photos

Size:10*5mm FCC ID: 2AW8C-LJCM39 Label Location

Internal Photos

FCC §15.247 (i), §2.1091 – RF Exposure FCC ID: 2AW8C-LJCM39 Applied procedures / limit According to FCC §15.247(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Note: ƒ is frequency in MHz * = Power density limit is applicable at frequencies greater than 100 MHz Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz * = Plane-wave equivalent power density MPE PREDICTION Predication of MPE limit at a given distance, Equation from OET Bulletin 65, Edition 97-01 Where: S = power density P = power input to antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna, R=0.2m RESULTS Worst mode Tune up Produ ce power Maximu m peak output power (dBm) Output power to antenna (mW) Antenna Gain (numeric) Power Density (S) (mW/ cm2) Limit (mW/ cm2) Result 802.11 b 17±1 18 63.10 1.32 (1.2dBi) 0.01657 1 Pass BLE 3±1 4 2.51 1.32 (1.2dBi) 0.00066 1 Pass

No.：BCTC/RF-EMC-007 Page: 1 of 42 Edition：A.3 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2105405276-1E Applicant: HANGZHOU LIJIACHENG ELECTRIC CO., LTD. Product Name: M39 Model/Type reference: M39 Tested Date: 2021-05-26 to 2021-06-02 Issued Date: 2021-06-02 Report No.: BCTC2105405276-1E No.：BCTC/RF-EMC-007 Page: 2 of 42 Edition：A.3 FCC ID: 2AW8C-LJCM39 The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: M39 Trademark: HENGTE Model/Type Ref.: M39 Prepared For: HANGZHOU LIJIACHENG ELECTRIC CO., LTD. Address: NO 35 YANGSHAN ROAD,GAOHONG ZONE, HANGZHOU , China Manufacturer: HANGZHOU LIJIACHENG ELECTRIC CO., LTD. Address: NO 35 YANGSHAN ROAD,GAOHONG ZONE, HANGZHOU , China Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2021-05-25 Sample tested Date: 2021-05-26 to 2021-06-02 Issue Date: 2021-06-02 Report No.: BCTC2105405276-1E Test Standards FCC Part15.247 ANSI C63.10-2013 Test Results PASS Remark: This is Bluetooth BLE radio test report. Tested by: Approved by: Eric Yang/Project Handler Zero Zhou/Reviewer Report No.: BCTC2105405276-1E No.：BCTC/RF-EMC-007 Page: 3 of 42 Edition：A.3 TABLE OF CONTENT Test Report Declaration Page 1. VERSION ............................................................ 5 2. TEST SUMMARY ..................................................... 6 3. MEASUREMENT UNCERTAINTY ....................................... 7 4. PRODUCT INFORMATION AND TEST SETUP............................ 8 4.1 Product Information ..................................................... 8 4.2 Test Setup Configuration ................................................ 8 4.3 Support Equipment ..................................................... 9 4.4 Channel List ........................................................... 9 4.5 Test Mode ............................................................ 10 4.6 Table of parameters of text software setting ............................... 10 5. TEST FACILITY AND TEST INSTRUMENT USED ........................ 11 5.1 Test Facility ........................................................... 11 5.2 Test Instrument Used .................................................. 11 6. CONDUCTED EMISSIONS ............................................ 13 6.1 Block Diagram Of Test Setup ............................................ 13 6.2 Limit ................................................................. 13 6.3 Test procedure ........................................................ 13 6.4 EUT operating Conditions ............................................... 13 6.5 Test Result ........................................................... 14 7. RADIATED EMISSIONS .............................................. 16 7.1 Block Diagram Of Test Setup ............................................ 16 7.2 Limit ................................................................. 17 7.3 Test procedure ........................................................ 18 7.4 EUT operating Conditions ............................................... 19 7.5 Test Result ........................................................... 20 8. RADIATED BAND EMISSION MEASUREMENT AND RESTRICTED BANDS OF OPERATION .................................................. 24 8.1 Block Diagram Of Test Setup ............................................ 24 8.2 Limit ................................................................. 24 8.3 Test procedure ........................................................ 25 8.4 EUT operating Conditions ............................................... 25 8.5 Test Result ........................................................... 26 9. POWER SPECTRAL DENSITY TEST ................................... 27 9.1 Block Diagram Of Test Setup ............................................ 27 9.2 Limit ................................................................. 27 9.3 Test procedure ........................................................ 27 9.4 EUT operating Conditions ............................................... 27 9.5 Test Result ........................................................... 28 10. BANDWIDTH TEST .................................................. 30 Report No.: BCTC2105405276-1E No.：BCTC/RF-EMC-007 Page: 4 of 42 Edition：A.3 10.1 Block Diagram Of Test Setup .......................................... 30 10.2 Limit ................................................................ 30 10.3 Test procedure ....................................................... 30 10.4 EUT operating Conditions ............................................. 30 10.5 Test Result .......................................................... 31 11. PEAK OUTPUT POWER TEST ........................................ 33 11.1 Block Diagram Of Test Setup .......................................... 33 11.2 Limit ................................................................ 33 11.3 Test procedure ....................................................... 33 11.4 EUT operating Conditions ............................................. 33 11.5 Test Result .......................................................... 34 12. 100 KHZ BANDWIDTH OF FREQUENCY BAND EDGE ................... 35 12.1 Block Diagram Of Test Setup .......................................... 35 12.2 Limit ................................................................ 35 12.3 Test procedure ....................................................... 35 12.4 EUT operating Conditions ............................................. 35 12.5 Test Result ..................................................…

Text truncated - open the document above for the full version.

No.：BCTC/RF-EMC-005 Page: 1 of 65 Edition：A.3 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2105405276-2E Applicant: HANGZHOU LIJIACHENG ELECTRIC CO., LTD. Product Name: M39 Model/Type reference: M39 Tested Date: 2021-05-26 to 2021-06-02 Issued Date: 2021-06-02 Report No.: BCTC2105405276-2E No.：BCTC/RF-EMC-005 Page: 2 of 65 Edition：A.3 FCC ID: 2AW8C-LJCM39 The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: M39 Trademark: HENGTE Model/Type reference: M39 Prepared For: HANGZHOU LIJIACHENG ELECTRIC CO., LTD. Address: NO 35 YANGSHAN ROAD,GAOHONG ZONE, HANGZHOU , China Manufacturer: HANGZHOU LIJIACHENG ELECTRIC CO., LTD. Address: NO 35 YANGSHAN ROAD,GAOHONG ZONE, HANGZHOU , China Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2021-05-25 Sample tested Date: 2021-05-26 to 2021-06-02 Issue Date: 2021-06-02 Report No.: BCTC2105405276-2E Test Standards FCC Part15.247 ANSI C63.10-2013 Test Results PASS Remark: This is WIFI-2.4GHz band radio test report. Tested by: Approved by: Eric Yang/Project Handler Zero Zhou/Reviewer Report No.: BCTC2105405276-2E No.：BCTC/RF-EMC-005 Page: 3 of 65 Edition：A.3 TABLE OF CONTENT Test Report Declaration Page 1. VERSION ............................................................ 5 2. TEST SUMMARY ..................................................... 6 3. MEASUREMENT UNCERTAINTY ....................................... 7 4. PRODUCT INFORMATION AND TEST SETUP............................ 8 4.1 Product Information ..................................................... 8 4.2 Test Setup Configuration ................................................ 8 4.3 Support Equipment ..................................................... 9 4.4 Channel List ........................................................... 9 4.5 Test Mode ............................................................ 10 4.6 table of parameters of text software setting ................................ 10 5. TEST FACILITY AND TEST INSTRUMENT USED ........................ 11 5.1 Test Facility ........................................................... 11 5.2 Test Instrument Used .................................................. 11 6. CONDUCTED EMISSIONS ............................................ 13 6.1 Block Diagram Of Test Setup ............................................ 13 6.2 Limit ................................................................. 13 6.3 Test procedure ........................................................ 13 6.4 EUT operating Conditions ............................................... 13 6.5 Test Result ........................................................... 14 7. RADIATED EMISSIONS .............................................. 16 7.1 Block Diagram Of Test Setup ............................................ 16 7.2 Limit ................................................................. 17 7.3 Test procedure ........................................................ 18 7.4 EUT operating Conditions ............................................... 19 7.5 Test Result ........................................................... 19 8. RADIATED BAND EMISSION MEASUREMENT AND RESTRICTED BANDS OF OPERATION .................................................. 26 8.1 Block Diagram Of Test Setup ............................................ 26 8.2 Limit ................................................................. 26 8.3 Test procedure ........................................................ 27 8.4 EUT operating Conditions ............................................... 27 8.5 Test Result ........................................................... 28 9. POWER SPECTRAL DENSITY TEST ................................... 30 9.1 Block Diagram Of Test Setup ............................................ 30 9.2 Limit ................................................................. 30 9.3 Test procedure ........................................................ 30 9.4 EUT operating Conditions ............................................... 30 9.5 Test Result ........................................................... 31 10. BANDWIDTH TEST .................................................. 38 Report No.: BCTC2105405276-2E No.：BCTC/RF-EMC-005 Page: 4 of 65 Edition：A.3 10.1 Block Diagram Of Test Setup .......................................... 38 10.2 Limit ................................................................ 38 10.3 Test procedure ....................................................... 38 10.4 EUT operating Conditions ............................................. 38 10.5 Test Result .......................................................... 39 11. PEAK OUTPUT POWER TEST ........................................ 47 11.1 Block Diagram Of Test Setup .......................................... 47 11.2 Limit ................................................................ 47 11.3 Test procedure ....................................................... 47 11.4 EUT operating Conditions ............................................. 47 11.5 Test Result .......................................................... 48 12. 100 KHZ BANDWIDTH OF FREQUENCY BAND EDGE ................... 49 12.1 Block Diagram Of Test Setup .......................................... 49 12.2 Limit ................................................................ 49 12.3 Test procedure ....................................................... 49 12.4 EUT operating Conditions ............................................. 49 12.5 Test Result .........................................…

Text truncated - open the document above for the full version.

Conducted emissions Radiated Measurement Photos