2AWCBHS-001AMulti-color Smart Table Lamp - WIFI

定宲宵宮家季宺宬宷宫室宯宨宻室 定宲宵宮家季宺宬宷宫宖宬宵宬季宖宫宲宵宷宦宸宷家 定宲宵宮家季宺宬宷宫季宷宫宨宊宲宲宪宯宨季宄家家宬家宷室宱宷 定宲宵宮家季宺宬宷宫宖宰室宵宷季宏宬宩宨 Smart Table LampUser Guide6HWXSLQVWUXFWLRQVIRU6PDUW/LIH$SS$OH[DDQG*RRJOH$VVLVWDQW Scan the QR code to read the detailedinstruction in https://www.hugo-ai.com .   *K ]:L)L C O N T E N T S 3URGXFW6SHFLILFDWLRQ   3URGXFW'LDJUDPDQG2SHUDWLRQ  6PDUW/LIH$SS6HWXS  $332SHUDWLRQ,QVWUXFWLRQV  &RQQHFWWR$OH[D  &RQQHFWWR*RRJOH$VVLVWDQW  (QDEOH6LUL6KRUWFXWV )RUXVHZLWKL3KRQH  3UREOHPVDQG6ROXWLRQV  )HGHUDO&RPPXQLFDWLRQ&RPPLVVLRQ )&& 6WDWHPHQWIRU8VHUV C O N T E N I D O (VSHFLILFDFLRQHVGHOSURGXFWR   'LDJUDPD\IXQFLRQDPLHQWRGHOSURGXFWR  &RQILJXUDFLyQGHODDSOLFDFLyQ6PDUW/LIH  ,QVWUXFFLRQHVGHIXQFLRQDPLHQWRGHODDSOLFDFLyQ  &RQHFWDUVHD$OH[D  &RQHFWDUVHDO*RRJOH$VVLVWDQW  +DELOLWDUORVDWDMRVGH6LUL SDUDXVDUFRQL3KRQH  3UREOHPDV\VROXFLRQHV  'HFODUDFLyQGHOD&RPLVLyQ)HGHUDOGH&RPXQLFDFLRQHV )&& SDUD ORVXVXDULRV Product Specification 1 Package Includes Specification Ɣ 1 x LED Table Lamp Ɣ 1 x Power Cable Ɣ 1 x User Manual ModelWattage Adapter Input Current Ripple Adapter Output Network CCT / ColorLuminous Flux / IntensityCRIIP RatingOperation TemperatureDimensionsLifespan HG057W100-240V/AC 50/60HZFlicker Free±5%WIFI IEEE802.11b/g/n(2.4GHz)5V/1.5A2000K-5700K /16 Millon Colors350lm@4000K, Red:7.5cd, Green:16cd, Blue:3.5cd5D•IP200°C~40°C/32°F~104°F3.9'' X 3.9'' X 7.1'' (100mm X 100mm X 180mm)30,000hrs Product Diagram and Operation 2 Type-C Port Power Button Timer Mode Indicator ON/OFFTap the Power Button to turn on and off the lamp. ADJUST BRIGHTNESS AND RGB COLOR 1.On White Light Mode, hold the Power Button to a djust the brightness from 3% to 100%; 2.On RGB Mode, hold the Power Button to select your desired col or from 16 million colors;3.On Auto-Cycling RGB Mode, hold the Power Button to change the color cycling speed. There are three different auto-cycling modes. SET TIMER Tap the Timer Button to set an auto-off in 30/60 minutes. One green indicator: auto-off in 30 minutes;Two green indicators: auto-off in 60 minutes;Two white indicators: timer is off.SET MODE Tap the “M” Button to change the light mode.Mode switching sequence: 1. White Light Mode: 2000K Warm White2. White Light Mode: 4000K Neutral White3. White Light Mode: 5700K Cool White4. RGB Mode5. Auto-Cycling RGB Mode Hold the timer button to reset the lamp. The lamp is ready to c onnect with WiFi when the indicator flashes quickly in green. RESET THE LAMP Smart Life App Setup 3 Preparation 2. Install the Smart Life app from the Apple Store/ Google Play Store, or via scanning the QR code. Download and launch the Smart Life 1. Connect to 2.4GHz Wi-Fi net- work and turn Bluetooth on. Wi-Fi 2.4GHzWi-Fi 5GHz 3. Register an account and allow the app to use Bluetooth. Smart Life App Setup 4 Prepare the Lamp for Connection Charge and turn on the lamp. The indicator will flash quickly in green. ON OFF Smart Life App Setup 5 Add the Lamp to Smart Life The lamp will appear automatically waiting to be added when yo u open the Smart Life App. 濖濿濼濶濾澳瀡濚瀂澳瀇瀂澳濴濷濷瀢濁 濦濸濿濸濶瀇澳瀇濻濸澳瀇濴濵濿濸澳濿濴瀀瀃濁 濘瀁瀇濸瀅澳濅濁濇濚濛瀍澳濪濼激濙濼 瀁濸瀇瀊瀂瀅濾澳瀁濴瀀濸澳濴瀁濷瀃濴瀆瀆瀊瀂瀅濷澿澳瀇濻濸瀁澳瀇濴瀃澵濡濸瀋瀇澵濁 濪濴濼瀇澳濹瀂瀅澳濴濷濷濼瀁濺澳濷濸瀉濼濶濸濁 濬瀂瀈澳濶濴瀁澳濸濷濼瀇澳瀇濻濸澳濿濴瀀瀃 瀁濴瀀濸澳濴瀁濷澳濶濿濼濶濾澳瀡濗瀂瀁濸瀢濁 Smart Life App Setup 6 Add the Lamp to Smart Life (Manually) Or you could add the lamp to Smart Life manually. 濧濴瀃澳澵澾澵澳濼瀁澳瀇濻濸澳瀈瀃瀃濸瀅瀅濼濺濻瀇澳濶瀂瀅瀁濸瀅澳瀂瀅澳瀌瀂瀈澳濶濴瀁濴濿瀆瀂澳瀆濸濿濸濶瀇澳澵濔濷濷澳濗濸瀉濼濶濸澵濁 濧濴瀃澳澵濟濼濺濻瀇濼瀁濺澵澳濴瀁濷澳瀇濻濸瀁瀇濴瀃澳澵濟濼濺濻瀇濼瀁濺澳濦瀂瀈瀅濶濸澻濕濟濘澾濪濼激濙濼澼澵濁 濘瀁瀇濸瀅澳濅濁濇濚濛瀍澳濪濼激濙濼瀁濸瀇瀊瀂瀅濾澳瀁濴瀀濸澳濴瀁濷瀃濴瀆瀆瀊瀂瀅濷澿澳瀇濻濸瀁澳瀇濴瀃澵濡濸瀋瀇澵濁 濪濴濼瀇澳濹瀂瀅澳濴濷濷濼瀁濺澳濷濸瀉濼濶濸濁 濬瀂瀈澳濶濴瀁澳濸濷濼瀇澳瀇濻濸澳濿濴瀀瀃 瀁濴瀀濸澳濴瀁濷澳濶濿濼濶濾澳瀡濗瀂瀁濸瀢濁 NOTE: If you have trouble setting up the lamp, please contact u s via [email protected] . APP Operation Instructions 7 Tunable White RGB Mode Scene Mode Ř澳濕瀅濼濺濻瀇瀁濸瀆瀆澳濖瀂瀁瀇瀅瀂濿ř澳濖瀂濿瀂瀅澳濧濸瀀瀃濸瀅濴瀇瀈瀅濸澳濖瀂瀁瀇瀅瀂濿Ś澳濦濿濼瀃澳瀇濻濸瀆濸澳濴瀅濸濴澳濶濴瀁澳濸瀁瀇濸瀅澳瀇濻濸澳濶瀂濿瀂瀅澳瀆濸濿濸濶瀇瀂瀅 Ř澳濕瀅濼濺濻瀇瀁濸瀆瀆澳濖瀂瀁瀇瀅瀂濿ř澳濕瀅濼濺濻瀇瀁濸瀆瀆澳濦濴瀇瀈瀅濴瀇濼瀂瀁澳濂澳濖瀂濿瀂瀅澳濖瀂瀁瀇瀅瀂濿Ś澳濖濿濼濶濾澳瀇瀂澳濾瀁瀂瀊澳瀀瀂瀅濸澳濷濸瀇濴濼濿瀆澳瀂濹澳瀇濻濸澳濷濸瀉濼濶濸澿瀂瀅澳瀅濸瀁濴瀀濸澳瀇濻濸澳濿濴瀀瀃澿澳瀆濻濴瀅濸澳濼瀇澳瀇瀂澳瀌瀂瀈瀅澳濹濴瀀濼濿濼濸瀆 濡瀂瀇濸濍澳濙瀂瀅澳瀇濻濸澳瀆濶濸瀁濸澳瀀瀂濷濸瀆濍澳濡濼濺濻瀇澿澳濥濸濴濷澿濪瀂瀅濾濼瀁濺澳濴瀁濷澳濟濸濼瀆瀈瀅濸澿澳瀇濻濸濼瀅澳濶瀂濿瀂瀅澳瀆濸瀇瀇濼瀁濺瀆濴瀅濸澳濹濼瀋濸濷澳濴瀁濷澳濶瀂瀈濿濷澳瀁瀂瀇澳濵濸澳濶瀈瀆瀇瀂瀀濼瀍濸濷濁濛瀂瀊濸瀉濸瀅澿澳瀌瀂瀈澳濶濴瀁澳濶瀈瀆瀇瀂瀀濼瀍濸澳瀇濻濸澳濶瀂濿瀂瀅瀆濸瀇瀇濼瀁濺澳瀂濹澳瀂瀇濻濸瀅澳瀆濶濸瀁濸澳瀀瀂濷濸瀆澳澻濦瀂濹瀇澿澳濖瀂濿瀂瀅濹瀈濿澿濗濴瀍瀍濿濼瀁濺澿澳濴瀁濷澳濚瀂瀅濺濸瀂瀈瀆澼澳濴濶濶瀂瀅濷濼瀁濺澳瀇瀂澳瀌瀂瀈瀅瀅濸瀄瀈濼瀅濸瀀濸瀁瀇瀆濁 1 2 3 1 2 3 APP Operation Instructions 8 Schedules 濦濸瀇澳瀆濶濻濸濷瀈濿濸瀆澳濵濴瀆濸濷澳濴瀅瀂瀈瀁濷瀌瀂瀈瀅澳瀃瀅濸濹濸瀅濸瀁濶濸瀆澳濴瀁濷澳濷濴濼濿瀌澳瀁濸濸濷瀆濁 Timers 濦濸瀇澳瀇濻濸澳瀇濼瀀濸瀅澳瀇瀂澳瀇瀈瀅瀁澳瀂濹濹澳瀇濻濸澳濿濴瀀瀃澳濴瀈瀇瀂瀀濴瀇濼濶濴濿濿瀌濁 More Functions 濛濸瀅濸澳濴瀅濸澳瀀瀂瀅濸澳濹瀈瀁濶瀇濼瀂瀁瀆澳濹瀂瀅澳瀌瀂瀈澳瀇瀂澳瀀濴濾濸澳瀇濻濸澳濿濴瀀瀃澳瀆瀀濴瀅瀇濸瀅濁 Connect to Alexa 9 濦濸濴瀅濶濻澳澵濦瀀濴瀅瀇澳濟濼濹濸澵澳濼瀁澳瀇濻濸澳濼瀁瀃瀈瀇澳濵瀂瀋澳濴瀁濷瀆濸濿濸濶瀇澳濦瀀濴瀅瀇澳濟濼濹濸澳濔瀃瀃澳濼瀁澳瀇濻濸澳瀆濸濴瀅濶濻澳瀅濸瀆瀈濿瀇瀆濁 濖濿濼濶濾澳澵濘濡濔濕濟濘澳濧濢澳濨濦濘澵濁澳 濟濴瀈瀁濶濻澳瀇濻濸澳濔濿濸瀋濴澳濔瀃瀃澳瀇濻濸瀁澳瀇濴瀃瀂瀁澳瀇濻濸澳濠濸瀁瀈濁澳濖濻瀂瀂瀆濸澳瀡濦濾濼濿濿瀆澹濚濴瀀濸瀆瀢澳濼瀁澳瀇濻濸澳瀂瀃瀇濼瀂瀁澳濵濴瀅濁 2 1 5 3 4 10 Connect to Alexa 濧濻濸瀁澳瀌瀂瀈澳濶瀂瀈濿濷澳濶瀂瀁瀇瀅瀂濿澳瀇濻濸澳濿濴瀀瀃澳瀉濼濴澳濔濿濸瀋濴濁 濟瀂濺澳濼瀁澳濦瀀濴瀅瀇澳濟濼濹濸澳濴濶濶瀂瀈瀁瀇澳濴瀁濷澳濴瀈瀇濻瀂瀅濼瀍濸濔濿濸瀋濴濁澳濧濻濸瀁澳濶濿濼濶濾澳瀡濖濟濢濦濘瀢濁 1 濧濴瀃澳瀡濗濸瀉濼濶濸瀆瀢澳瀂瀁澳瀇濻濸澳濠濸瀁瀈濁澳濛濸瀅濸澳濼瀆澳濴瀀濸瀆瀆濴濺濸澳瀡濄澳濿濼濺濻瀇濷濼瀆濶瀂瀉濸瀅濸濷瀢澳瀂瀁澳瀇濻濸澳瀇瀂瀃濁濧濻濸澳濿濴瀀瀃澳濼瀆澳濶瀂瀁瀁濸濶瀇濸濷澳瀇瀂澳濴濿濸瀋濴澳瀆瀈濶濶濸瀆瀆濹瀈濿濿瀌濁 2 Connect to Google Assistant 濔濹瀇濸瀅澳瀌瀂瀈澳濴瀆瀆濼濺瀁澳瀅瀂瀂瀀瀆澳濹瀂瀅澳濷濸瀉濼濶濸瀆澿澳瀌瀂瀈瀅澳濷濸瀉濼濶濸瀆澳瀊濼濿濿澳濵濸澳濿濼瀆瀇濸濷 澳濼瀁澳瀇濻濸澳濛瀂瀀濸澳濖瀂瀁瀇瀅瀂濿澳濣濴濺濸濁澳濧濻濸瀁澳瀌瀂瀈澳濶濴瀁澳濶瀂瀁瀇瀅瀂濿澳瀇濻濸澳濿濴瀀瀃 瀇濻瀅瀂瀈濺濻澳濚瀂瀂濺濿濸澳濛瀂瀀濸濁 濟濴瀈瀁濶濻澳瀇濻濸澳濚瀂瀂濺濿濸澳濔瀆瀆濼瀆瀇濴瀁瀇濔瀃瀃澳瀇濻濸瀁澳瀇濴瀃澳瀂瀁澳瀇濻濸澳濼濶瀂瀁澳濼瀁瀇濻濸澳瀈瀃瀃濸瀅澳瀅濼濺濻瀇濁 濧濴瀃澳澵濔瀆瀆濼瀆瀇濴瀁瀇澵澳濴瀁濷澳濖濻瀂瀂瀆濸澵濛瀂瀀濸澳濖瀂瀁瀇瀅瀂濿澵濁澳 濧瀂澳濴濷濷澳濴澳濷濸瀉濼濶濸澳瀇濴瀃澳瀂瀁澳瀇濻濸濖濼瀅濶濿濸澻澾澼澳濿瀂濶濴瀇濸濷澳濼瀁澳瀇濻濸澳濿瀂瀊濸瀅瀅濼濺濻瀇澳濶瀂瀅瀁濸瀅濁 濦濸濴瀅濶濻澳澵濦瀀濴瀅瀇澳濟濼濹濸澵澳濔瀃瀃濁濧濻濸瀁澳濿瀂濺澳濼瀁澳瀌瀂瀈瀅澳濦瀀濴瀅瀇澳濟濼濹濸濴濶濶瀂瀈瀁瀇澿澳瀇濴瀃澳澵濟濼瀁濾澳濡瀂瀊澵濁 1 2 3 4 11 12 Enable Siri Shortcuts (For use with iPhone) 濡瀂瀊澳瀌瀂瀈澳濶濴瀁澳瀈瀆濸澳瀇濻濸澳瀡濛濸瀌澳濦濼瀅濼瀢澳濶瀂瀀瀀濴瀁濷澳瀇瀂澳濶瀂瀁瀇瀅瀂濿澳瀇濻濼瀆澳濴濶瀇濼瀂瀁澳濹 瀅瀂瀀澳瀌瀂瀈瀅澳濼濢濦澳濷濸瀉濼濶濸濁 濧濴瀃澳瀢濦瀀濴瀅瀇瀢澳瀂瀁澳瀇濻濸澳濵瀂瀇瀇瀂瀀瀀濸瀁瀈澳濵濴瀅澳濴瀁濷澳瀇濻濸瀁澳濶瀅濸濴瀇濸濴澳瀡濧濴瀃澳瀇瀂澳濥瀈瀁瀢澳濶瀂瀀瀀濴瀁濷濁 濦濸瀇澳濴澳濶瀂瀁濷濼瀇濼瀂瀁澳濴瀁濷澳瀆濸瀇瀇濼瀁濺瀂濹澳瀡濧濴瀃激瀇瀂激濥瀈瀁瀢澳濶瀂瀀瀀濴瀁濷濁 濖濿濼濶濾澳瀡濔濷濷澳瀇瀂澳濦濼瀅濼瀢澳瀂瀁澳瀇濻濸瀅濼濺濻瀇澳濶瀂瀅瀁濸瀅濁 濘濷濼瀇澳瀇濻濸澳瀊濴濾濸激瀈瀃澳濶瀂瀀瀀濴瀁濷濴瀁濷澳瀆濴瀉濸澳瀆濻瀂瀅瀇濶瀈瀇濁 1 2 3 4 Problems and SolutionsIf the app can't control your lamp but its status shows "on":濖濻濸濶濾澳濼濹澳瀇濻濸澳濷濸瀉濼濶濸澳瀌瀂瀈澺瀅濸澳瀈瀆濼瀁濺澳濼瀆澳濶瀂瀁瀁濸濶瀇濸濷澳瀇瀂澳瀁濸瀇瀊瀂瀅濾澳濴瀁濷澳濼濹 澳瀇濻濸澳濿濴瀀瀃澳濼瀆澳瀊濼瀇濻濼瀁澳瀅濴瀁…

Text truncated - open the document above for the full version.

SHENZHENSHI KAIXIN GUANGDIAN CO.,LTD Mar.09, 2021 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : 2AWCBHS-001A Model Number: HS-001A, HG05WH, HG05LW, HG05DW, HG05GE, HG05MW, HG05BW, HG05BY, PR902101-US, PR902102-US, PR902102-US-a, PR902103- US, PR902103-US-a, MSL450, MSL440 To Whom It May Concern: We, The SHENZHENSHI KAIXIN GUANGDIAN CO.,LTD hereby declare that the models are identical except the model name and the appearance of color.. Except for the different above, no other modification is performed. Sincerely, Signature: SHENZHENSHI KAIXIN GUANGDIAN CO.,LTD Contact person: Pudding ye

SHENZHENSHI KAIXIN GUANGDIAN CO.,LTD Agent Authorization Company: SHENZHENSHI KAIXIN GUANGDIAN CO.,LTD Address: Software Building, No. 9 Gaoxin Zhong Yi Road, High-Tech Park, Nanshan district, Shenzhen, China Product Name: Multi-color Smart Table Lamp - WIFI Model Number(s): HS-001A, HG05WH, HG05LW, HG05DW, HG05GE, HG05MW, HG05BW, HG05BY, PR902101-US, PR902102-US, PR902102-US-a, PR902103-US, PR902103-US-a, MSL450, MSL440 Product Description: Multi-color Smart Table Lamp - WIFI We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2021-03-09 Name: Pudding ye Company: SHENZHENSHI KAIXIN GUANGDIAN CO.,LTD

SHENZHENSHI KAIXIN GUANGDIAN CO.,LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021-01-27 Subject; Request for Confidentiality FCC ID: 2AWCBHS-001A To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely SHENZHENSHI KAIXIN GUANGDIAN CO.,LTD Contact person: Pudding ye

External Photos ALL VIEW OF EUT TOP VIEW OF EUT BOTTOM VIEW OF EUT FRONT VIEW OF EUT BACK VIEW OF EUT LEFT VIEW OF EUT RIGHT VIEW OF EUT VIEW OF EUT (PORT) VIEW OF ADAPTER-1 VIEW OF ADAPTER-2

FCC ID Label Location FCC ID: 2AWCBHS-001A

Internal Photos OPEN VIEW OF EUT INTERNAL VIEW OF EUT-1 INTERNAL VIEW OF EUT-2 INTERNAL VIEW OF EUT-3 INTERNAL VIEW OF EUT-4 INTERNAL VIEW OF EUT-5 INTERNAL VIEW OF EUT-6 INTERNAL VIEW OF EUT-7 Antenna

RF EXPOSURE EVALUATION 1. PRODUCT INFORMATION Product Description Multi-color Smart Table Lamp - WIFI Model Name HS-001A, HG05WH, HG05LW, HG05DW, HG05GE, HG05MW, HG05BW, HG05BY, PR902101-US, PR902102-US, PR902102-US-a, PR902103-US, PR902103-US-a, MSL450, MSL440 FCC ID 2AWCBHS-001A 2. EVALUATION METHOD AND LIMIT Human exposure to RF emissions from mobile devices (47 CFR §2.1091) may be evaluated based on the MPE limits adopted by the FCC for electric and magnetic field strength and/or power density, as appropriate, since exposures are assumed to occur at distances of 20 cm or more from persons. LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE Frequency Range (MHz) E-field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Time |E| 2 , |H| 2 or S (Minutes) 0.3 -- 1.34 614 1.63 (100)* 30 1.34 -- 30 824/f 2.19/f (180/f 2 )* 30 30 -- 300 27.5 0.073 0.2 30 300 -- 1500 -- -- f/1500 30 1500 -- 100,000 -- -- 1.0 30 *Note: 1. f= Frequency in MHz * Plane-wave Equivalent Power Density 2. The averaging time for General Population/Uncontrolled exposure to fixed transmitters is not applicable for mobile and portable transmitters. See 47 CFR §§2.1091 and 2.1093 on source-based time-averaging requirement for mobile and portable transmitters. S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna CALCULATION A minimum test separation distance ≥ 20 cm is required between the antenna and radiating structures of the device and nearby persons to apply mobile device exposure limits. The distance must be at least 20 cm and fully supported by the operating and installation configurations of the transmitter and its antenna(s), according to the source-based time-averaged maximum power requirements of § 2.1091(d)(2). In cases where cable losses or other attenuations are applied to determine compliance, the most conservative operating configurations and exposure conditions must be evaluated. 2.4G WIFI Antenna Gain=1.5dBi (Numeric 1.41), π=3.14 Note: 1. Only the worst case recorded. 3. conclusion Compliance the RF exposure requirement Frequency Output Power Output Power Power Density Power Density Limit MHz dBm mW mW/cm 2 mW/cm 2 2462 15.97 39.54 0.011 1

Page 1 of 98 Report No.: AGC11410201103FE05 FCC ID : 2AWCBHS-001A APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Multi-color Smart Table Lamp - WIFI BRAND NAME : N/A MODEL NAME : HS-001A, HG05WH, HG05LW, HG05DW, HG05GE, HG05MW, HG05BW, HG05BY, PR902101-US, PR902102-US, PR902102-US-a, PR902103-US, PR902103-US-a, MSL450, MSL440 APPLICANT : SHENZHENSHI KAIXIN GUANGDIAN CO.,LTD DATE OF ISSUE : Jan. 26, 2021 STANDARD(S) TEST PROCEDURE(S) : FCC Part 15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd FCC Test Report Report No.: AGC11410201103FE05 Page 2 of 98 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jan. 26, 2021 Valid Initial Release Report No.: AGC11410201103FE05 Page 3 of 98 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY ............................................................................................................... 5 2. GENERAL INFORMATION ............................................................................................................................ 6 2.1. PRODUCT DESCRIPTION ..................................................................................................................... 6 2.2. TABLE OF CARRIER FREQUENCYS ..................................................................................................... 6 2.3. IEEE 802.11N MODULATION SCHEME .................................................................................................. 7 2.4. RELATED SUBMITTAL(S) / GRANT (S) .................................................................................................. 7 2.5. TEST METHODOLOGY .......................................................................................................................... 7 2.6. SPECIAL ACCESSORIES ....................................................................................................................... 7 2.7. EQUIPMENT MODIFICATIONS .............................................................................................................. 7 2.8. ANTENNA REQUIREMENT .................................................................................................................... 8 3. MEASUREMENT UNCERTAINTY ................................................................................................................. 9 4. DESCRIPTION OF TEST MODES ............................................................................................................... 10 5. SYSTEM TEST CONFIGURATION ............................................................................................................. 11 5.1. CONFIGURATION OF EUT SYSTEM .................................................................................................... 11 5.2. EQUIPMENT USED IN EUT SYSTEM .................................................................................................... 11 5.3. SUMMARY OF TEST RESULTS ............................................................................................................. 11 6. TEST FACILITY ........................................................................................................................................... 12 7. OUTPUT POWER ........................................................................................................................................ 13 7.1. MEASUREMENT PROCEDURE ........................................................................................................... 13 7.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................... 13 7.3. LIMITS AND MEASUREMENT RESULT ............................................................................................... 14 8. 6 DB BANDWIDTH ...................................................................................................................................... 16 8.1. MEASUREMENT PROCEDURE ........................................................................................................... 16 8.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................... 16 8.3. LIMITS AND MEASUREMENT RESULTS ............................................................................................. 17 9. CONDUCTED SPURIOUS EMISSION ........................................................................................................ 25 Report No.: AGC11410201103FE05 Page 4 of 98 9.1. MEASUREMENT PROCEDURE ........................................................................................................... 25 9.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................... 25 9.3. MEASUREMENT EQUIPMENT USEDJN ............................................................................................. 25 9.4. LIMITS AND MEASUREMENT RESULT ............................................................................................... 25 10. MAXIMUM CONDUCTED OUTPUT POWER SPECTRAL DENSITY ....................................................... 42 10.1 MEASUREMENT PROCEDURE .......................................................................................................... 42 10.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................. 42 10.3 MEASUREMENT EQUIPMENT USED ................................................................................................. 42 10.4 LIMITS AND MEASUREMENT RESULT .............................................................................................. 42 11. RADIATED EMISSION ............................................................................................................................... 50 11.1. MEASUREMENT PROCEDURE ......................................................................................................... 50 11.2. TEST SETUP ..........................…

Text truncated - open the document above for the full version.

Report No.: AGC11410201103FE05 Page 47 of 98 802.11n 20 TEST RESULT TEST PLOT OF SPECTRAL DENSITY FOR LOW CHANNEL TEST PLOT OF SPECTRAL DENSITY FOR MIDDLE CHANNEL Report No.: AGC11410201103FE05 Page 48 of 98 TEST PLOT OF SPECTRAL DENSITY FOR HIGH CHANNEL 802.11n 40 TEST RESULT TEST PLOT OF SPECTRAL DENSITY FOR LOW CHANNEL Report No.: AGC11410201103FE05 Page 49 of 98 TEST PLOT OF SPECTRAL DENSITY FOR MIDDLE CHANNEL TEST PLOT OF SPECTRAL DENSITY FOR HIGH CHANNEL Report No.: AGC11410201103FE05 Page 50 of 98 11. RADIATED EMISSION 11.1. MEASUREMENT PROCEDURE 1. The EUT was placed on the top of the turntable 0.8 or 1.5 meter above ground. The phase center of the receiving antenna mounted on the top of a height-variable antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the broadband receiving antenna was varied between one meter and four meters above ground to find the maximum emissions field strength of both horizontal and vertical polarization. 4. For each suspected emissions, the antenna tower was scan (from 1 M to 4 M) and then the turntable was rotated (from 0 degree to 360 degrees) to find the maximum reading. 5. Set the test-receiver system to Peak or CISPR quasi-peak Detect Function with specified bandwidth under Maximum Hold Mode. 6. For emissions above 1GHz, use 1MHz RBW and 3MHz VBW for peak reading. Place the measurement antenna away from each area of the EUT determined to be a source of emissions at the specified measurement distance, while keeping the measurement antenna aimed at the source of emissions at each frequency of significant emissions, with polarization oriented for maximum response. The measurement antenna may have to be higher or lower than the EUT, depending on the radiation pattern of the emission and staying aimed at the emission source for receiving the maximum signal. The final measurement antenna elevation shall be that which maximizes the emissions. The measurement antenna elevation for maximum emissions shall be restricted to a range of heights of from 1 m to 4 m above the ground or reference ground plane. 7. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum values. 8.If the emissions level of the EUT in peak mode was 3 dB lower than the average limit specified, then testing will be stopped and peak values of EUT will be reported, otherwise, the emissions which do not have 3 dB margin will be repeated one by one using the quasi-peak method for below 1GHz. 9. For testing above 1GHz, the emissions level of the EUT in peak mode was lower than average limit (that means the emissions level in peak mode also complies with the limit in average mode), then testing will be stopped and peak values of EUT will be reported, otherwise, the emissions will be measured in average mode again and reported. 10. In case the emission is lower than 30MHz, loop antenna has to be used for measurement and the recorded data should be QP measured by receiver. High - Low scan is not required in this case. Report No.: AGC11410201103FE05 Page 51 of 98 11.2. TEST SETUP Radiated Emission Test-Setup Frequency Below 30MHz RADIATED EMISSION TEST SETUP 30MHz-1000MHz RADIATED EMISSION TEST SETUP ABOVE 1000MHz Report No.: AGC11410201103FE05 Page 52 of 98 11.3. LIMITS AND MEASUREMENT RESULT 15.209(a) Limit in the below table has to be followed Frequencies (MHz) Field Strength (micorvolts/meter) Measurement Distance (meters) 0.009~0.490 2400/F(KHz) 300 0.490~1.705 24000/F(KHz) 30 1.705~30.0 30 30 30~88 100 3 88~216 150 3 216~960 200 3 Above 960 500 3 Note: All modes were tested For restricted band radiated emission, the test records reported below are the worst result compared to other modes. 11.4. TEST RESULT RADIATED EMISSION BELOW 30MHZ The amplitude of spurious emissions from 9kHz to 30MHz which are attenuated more than 20 dB below the permissible value need not be reported. Report No.: AGC11410201103FE05 Page 53 of 98 RADIATED EMISSION BELOW 1GHZ Test with adapter 1: HJ-0501500W1-US EUT Multi-color Smart Table Lamp - WIFI Model Name HS-001A Temperature 25°C Relative Humidity 58% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11b with date rate 1 2412MHZ Antenna Horizontal RESULT: PASS Report No.: AGC11410201103FE05 Page 54 of 98 EUT Multi-color Smart Table Lamp - WIFI Model Name HS-001A Temperature 25°C Relative Humidity 58% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11b with date rate 1 2412MHZ Antenna Vertical RESULT: PASS Report No.: AGC11410201103FE05 Page 55 of 98 Test with adapter 2: TPA-46050150UU EUT Multi-color Smart Table Lamp - WIFI Model Name HS-001A Temperature 25°C Relative Humidity 58% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11b with date rate 1 2412MHZ Antenna Horizontal RESULT: PASS Report No.: AGC11410201103FE05 Page 56 of 98 EUT Multi-color Smart Table Lamp - WIFI Model Name HS-001A Temperature 25°C Relative Humidity 58% Pressure 960hPa Test Voltage Normal Voltage Test Mode 802.11b with date rate 1 2412MHZ Antenna Vertical RESULT: PASS Note: 1. Factor=Antenna Factor + Cable loss, Margin=Measurement-Limit. 2. The “Factor” value can be calculated automatically by software of measurement system. 3. All test modes had been pre-tested. The 802.11b at low channel is the worst case and recorded in the report. Report No.:…

Text truncated - open the document above for the full version.

Report No.: AGC11410201103FE05 Page 87 of 98 CONDUCTED EMISSION TEST SETUP CONDUCTED TEST SETUP Report No.: AGC11410201103FE05 Page 88 of 98 APPENDIX A: PHOTOGRAPHS OF TEST SETUP- ADAPTER-2 FCC RADIATED EMISSION TEST SETUP BELOW 1GHZ FCC RADIATED EMISSION TEST SETUP ABOVE 1GHZ Report No.: AGC11410201103FE05 Page 89 of 98 CONDUCTED EMISSION TEST SETUP CONDUCTED TEST SETUP Report No.: AGC11410201103FE05 Page 90 of 98 APPENDIX B: PHOTOGRAPHS OF EUT ALL VIEW OF EUT TOP VIEW OF EUT Report No.: AGC11410201103FE05 Page 91 of 98 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC11410201103FE05 Page 92 of 98 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC11410201103FE05 Page 93 of 98 RIGHT VIEW OF EUT VIEW OF EUT (PORT) Report No.: AGC11410201103FE05 Page 94 of 98 OPEN VIEW OF EUT INTERNAL VIEW OF EUT-1 Report No.: AGC11410201103FE05 Page 95 of 98 INTERNAL VIEW OF EUT-2 INTERNAL VIEW OF EUT-3 Report No.: AGC11410201103FE05 Page 96 of 98 INTERNAL VIEW OF EUT-4 INTERNAL VIEW OF EUT-5 Report No.: AGC11410201103FE05 Page 97 of 98 INTERNAL VIEW OF EUT-6 INTERNAL VIEW OF EUT-7 Antenna Report No.: AGC11410201103FE05 Page 98 of 98 VIEW OF ADAPTER-1 VIEW OF ADAPTER-2 ----END OF REPORT---- Conditions of Issuance of Test Reports 1. All samples and goods are accepted by the Attestation of Global Compliance (Shenzhen) Co., Ltd (the “Company”) solely for testing and reporting in accordance with the following terms and conditions. The company provides its services on the basis that such terms and conditions constitute express agreement between the company and any person, firm or company requesting its services (the “Clients”). 2. Any report issued by Company as a result of this application for testing services (the “Report”) shall be issued in confidence to the Clients and the Report will be strictly treated as such by the Company. It may not be reproduced either in its entirety or in part and it may not be used for advertising or other unauthorized purposes without the written consent of the Company. The Clients to whom the Report is issued may, however, show or send it, or a certified copy thereof prepared by the Company to its customer, supplier or other persons directly concerned. The Company will not, without the consent of the Clients, enter into any discussion or correspondence with any third party concerning the contents of the Report, unless required by the relevant governmental authorities, laws or court orders. 3.The Company shall not be called or be liable to be called to give evidence or testimony on the Report in a court of law without its prior written consent, unless required by the relevant governmental authorities, laws or court orders. 4. The non-CMA report issued by AGC is only permitted to be used by the client as internal reference use and shall not be used for public demonstration purpose. 5. In the event of the improper use of the report as determined by the Company, the Company reserves the right to withdraw it, and to adopt any other additional remedies which may be appropriate. 6. Samples submitted for testing are accepted on the understanding that the Report issued cannot form the basis of, or be the instrument for, any legal action against the Company. 7. The Company will not be liable for or accept responsibility for any loss or damage however arising from the use of information contained in any of its Reports or in any communication whatsoever about its said tests or investigations. 8.Clients wishing to use the Report in court proceedings or arbitration shall inform the Company to that effect prior to submitting the sample for testing. 9. The Company is not responsible for recalling the electronic version of the original report when any revision is made to them. The Client assumes the responsibility to providing the revised version to any interested party who uses them. 10. Subject to the variable length of retention time for test data and report stored hereinto as otherwise specifically required by individual accreditation authorities, the Company will only keep the supporting test data and information of the test report for a period of six years. The data and information will be disposed of after the aforementioned retention period has elapsed. Under no circumstances shall we provide any data and information which has been disposed of after retention period. Under no circumstances shall we be liable for damage of any kind, including (but not limited to) compensatory damages, lost profits, lost data, or any form of special, incidental, indirect, consequential or punitive damages of any kind, whether based on breach of contract of warranty, tort (including negligence), product liability or otherwise, even if we are informed in advance of the possibility of such damages.

Test Setup Photos ADAPTER-1 FCC RADIATED EMISSION TEST SETUP BELOW 1GHZ FCC RADIATED EMISSION TEST SETUP ABOVE 1GHz CONDUCTED EMISSION TEST SETUP CONDUCTED TEST SETUP ADAPTER-2 FCC RADIATED EMISSION TEST SETUP BELOW 1GHZ FCC RADIATED EMISSION TEST SETUP ABOVE 1GHZ CONDUCTED EMISSION TEST SETUP CONDUCTED TEST SETUP