2AWD4-ECH-REFL-06Reflect 60 Fitness Mirror

INSTRUCTION MANUAL REFLECT 60 Lou Lentine CEO Echelon Fitness Multimedia, LLC Hello, I am Lou Lentine, CEO of Echelon, and I would like to welcome you to the Echelon community. You’ve made a great decision for yourself and your family. The Echelon Experience is an innovative combination of fitness products integrated with our state-of-the-art Echelon Fit ® app. This brand- new, fitness lifestyle connects your family, f riends, the Echelon community, and Echelon instructors together to help you with your fitness goals. With thousands of live and on-demand classes, no matter your schedule or experience, there is always a new and exciting class for you to join. We embrace your decision to join our Echelon family in the pursuit of living a healthier lifestyle. We are committed to continue engineering cutting edge, world-class fitness products to improve quality of life through workout experiences that make an active lifestyle more accessible and sustainable. Thank you again for choosing Echelon and I look forward to seeing you in the next live class! Best personal regards, Lou Lentine CEO, Echelon Fitness Multimedia, LLC 4 15.21 Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 15.105(B) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC RF RADIATION EXPOSURE STATEMENT: 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 1. This device may not cause harmful interference and 2. This device must accept any interference received, including interference that may cause undesired operation. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT 5 THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003. CANADIAN NOTICE This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with FCC’s and IC’s RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers must ensure that 20cm separation distance will be maintained between the device and users. CET APPAREIL NUMÉRIQUE DE CLASSE B EST CONFORME À LA NORME NMB-003. AVIS CANADIEN L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. L’appareil ne doit pas produire de brouillage. 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Cet appareil est conforme aux limites d’exposition au rayonnement RF stipulées par la FCC et l’IC pour une utilisation dans un environnement non contrôlé. Les antennes utilisées pour cet émetteur doivent être installées et doivent fonctionner à au moins 20 cm de distance des utilisateurs et ne doivent pas être placées près d’autres antennes ou émetteurs ou fonctionner avec ceux-ci. Les installateurs doivent s’assurer qu’une distance de 20 cm sépare l’appareil des utilisateurs. INNOVATION, SCIENCE AND ECONOMIC DEVELOPMENT CANADA (ISED) INNOVATION, SCIENCE ET DÉVELOPPEMENT ÉCONOMIQUE CANADA (ISED) 6 CONTENTS PARTS LIST�������������������������������������������������������������������������������������������������������������������������������7 IMPORTANT SAFETY INSTRUCTIONS�������������������������������������������������������������������������������������8 INSTALLATION �����������������������������������������������������������������������������������������������������������������������12 ECHELON MEMBERSHIP ACTIVATION �����������������������������������������������������������������������������������19 PRODUCT USE �����������������������������������������������������������������������������������������������…

Text truncated - open the document above for the full version.

Form: RFT-AMER-TCB-OP-19o Revision: 1 Page 1 of 1 Date: 1/25/2023 Echelon Fitness Multimedia LLC Attention: Application Examiner Re: Certification designating a U.S. agent for service of process pursuant to 47 CFR part §2.911(d)(7) of the FCC rules To whom it may concern, This letter is to certify that [Echelon Fitness Multimedia LLC] (“Applicant”) accepts responsibilities to act as its own agent pursuant to 47 CFR part §2.911(d)(7) of the FCC rules for service of process. I consent to the obligation to accept service of process on behalf of the applicant in regard to the FCC ID designated below. I HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant. I further acknowledge the requirement to maintain an agent extends for no less than one year after the termination of all marketing and importation or the conclusion of and commission-related proceeding involving the equipment and agree to immediately notify the FCC and Intertek if there is any change in the status identified above. Applicant Company Name : Echelon Fitness Multimedia LLC Contact Name : Corey Anderson Address : 605 Chestnut Street, 7th Floor Chattanooga TN 37450 United States Of America Telephone No : 423-402-9010 Email : [email protected] FCC ID : 2AWD4-ECH-REFL-06 Applicant FRN : 0029566114 Signature: ____________________________________ Date: Mar 11 th , 2026

Form: RFT-AMER-TCB-OP-19n Revision: 1 Page 1 of 1 Date: 1/25/2023 Echelon Fitness Multimedia LLC Attention: Application Examiner Re: Covered List, located at https://www.fcc.gov/supplychain/coveredlist and 47 CFR parts §2.903 and §2.911(d)(5)(ii) of the FCC rules Applicant: [Echelon Fitness Multimedia LLC] FCC ID: [2AWD4-ECH-REFL-06] To whom it may concern, [Echelon Fitness Multimedia LLC] (“Applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to 47 CFR part §2.903 of the FCC rules and does not originate directly or indirectly from any company named on the covered list located in the link above or any subsidiary or affiliate thereof. Applicant further certifies that, as of the date of the filing of the application, the Applicant [is not] identified on the Covered List as an entity producing “covered” equipment and is not a subsidiary or affiliate of any such entity pursuant to 47 CFR part §1.50002 and required by 47 CFR part §2.911(d)(5)(ii) of the FCC rules. Applicant further certifies that no Cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software is installed in the equipment being certified. I HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant and agree to immediately notify Intertek if there is any change in the status identified above. [Printed Name] Corey Anderson [Title] Product Development Specialist [Company name] Echelon Fitness Multimedia LLC [Date] Mar 13 th , 2026

Echelon Fitness Multimedia LLC [Mar 11 th , 2026] Federal Communications Commission 445 12 th Street SW Washington, DC 20554 Subject: Limited Agency Agreement (Echelon Fitness Multimedia LLC) FCC ID: [2AWD4-ECH-REFL-06] To Whom It May Concern: We, (Echelon Fitness Multimedia LLC), hereby authorized Intertek Testing Services Shenzhen Ltd. Guangzhou Branch to act as our Agent for the purpose of preparing application for FCC ID number (2AWD4-ECH-REFL-06) under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is (Dec 18, 2025). The Limited Agency Agreement expires on (Dec 18, 2026), unless sooner terminated or extended by written notice to Intertek Testing Services Shenzhen Ltd. Guangzhou Branch and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, Corey Anderson Product Development Specialist

1(1) [Echelon Fitness Multimedia LLC] [Mar 11 th , 2026] Attention: Application Examiner RE: Request for Confidentiality Applicant:[Echelon Fitness Multimedia LLC] FCC ID:[2AWD4-ECH-REFL-06] To Whom It May Concern: Permanent Confidentiality [Complete this section if permanent confidentiality is requested] Request is hereby submitted by [Echelon Fitness Multimedia LLC] to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: [Select one or more of items below, as appropriate] Schematics Detailed Block Diagrams Detailed Operational/Functional Description Rationale for request for confidentiality: [Echelon Fitness Multimedia LLC] has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.] If you have questions or need further information, please contact the undersigned. Sincerely, Corey Anderson Product Development Specialist Echelon Fitness Multimedia LLC

LABEL ARTWORK MODEL NO.: ECH-REFL-06 VERSION:0 DATE: 2 APR, 2026

Intertek Testing Services Shenzhen Ltd. Guangzhou Branch Room101/301/401/102/202/302/402/502/602/702/802, No. 7-2, Caipin Road, Huangpu District, Guangzhou, Guangdong, China Job No.: 250908219GZU FCC ID: 2AWD4-ECH-REFL-06 Version: 08 July 2020 Page 1 of 2 FCC RF Exposure-Mobile (MPE) RF Exposure Compliance Requirement Model no.: ECH-REFL-06 1. Standard requirement Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2m normally can be maintained between the user and the device. (a) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S)(mW/cm 2 ) Averaging Times ׀E׀ 2 ׀, H׀ 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f)* 6 30-300 61.4 0.163 1.0 6 300-1500 -- -- F/300 6 1500-100000 -- -- 5 6 (b) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S)(mW/cm 2 ) Averaging Times ׀E׀ 2 ׀, H׀ 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 -- -- F/1500 30 1500-100000 -- -- 1.0 30 Note: f=frequency in MHz; *Plane-wave equivalent power density Intertek Testing Services Shenzhen Ltd. Guangzhou Branch Room101/301/401/102/202/302/402/502/602/702/802, No. 7-2, Caipin Road, Huangpu District, Guangzhou, Guangdong, China Job No.: 250908219GZU FCC ID: 2AWD4-ECH-REFL-06 Version: 08 July 2020 Page 2 of 2 FCC RF Exposure-Mobile (MPE) 2. MPE Calculation Method E (V/m)=(30*P*G) 0.5 /d Power Density: Pd(W/m 2 )=E 2 /377 E=Electric Field (V/m), P=Peak RF output Power (W) G=EUT Antenna numeric gain (numeric) d= Separation distance between radiator and human body (m) The formula can be changed to Pd= (30*P*G)/(377*d 2 ) From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. 3. Calculated Result and Limit (1) BLE, antenna gain = 3.02dBi Frequency (MHz) Antenna Gain (Numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 2402-2480 2.00 6.21 4.18 0.00167 1 Complies (2) BT, antenna gain = 3.02dBi Frequency (MHz) Antenna Gain (Numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 2402-2480 2.00 6.89 4.89 0.00195 1 Complies (2) 2.4G WIFI, antenna gain = 3.02dBi Frequency (MHz) Antenna Gain (Numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 2412-2462 2.00 16.8 47.86 0.01909 1 Complies (2) 5G WIFI, antenna gain = 2.76dBi Frequency (MHz) Antenna Gain (Numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 5180-5240 1.89 12.6 18.20 0.00683 1 Complies 5260-5320 1.89 12.12 16.29 0.00612 1 Complies 5500-5700 1.89 11.43 13.90 0.00522 1 Complies 5745-5825 1.89 10.15 10.35 0.00389 1 Complies BT, BLE, 2.4G WIFI and 5G WIFI will not transmit simultaneously. Test Location: Intertek Testing Services Shenzhen Ltd. Guangzhou Branch All tests were performed at: Room102/104, No 203, KeZhu Road, Science City, GETDD Guangzhou, China

Echelon Fitness Multimedia LLC TEST REPORT SCOPE OF WORK EMC TESTING–ECH-REFL-06 REPORT NUMBER 250908219GZU-001 ISSUE DATE [REVISED DATE] 24-April-2026 [--------------------] PAGES 62 DOCUMENT CONTROL NUMBER FCC WIFI © 2021 INTERTEK TEST REPORT Room101/301/401/102/202/302/ 402/502/602/702/802, No. 7-2, Caipin Road, Huangpu District, Guangzhou, Guangdong, China Telephone: +86 20 8213 9688 Facsimile: +86 20 3205 7538 www.intertek.com.cn This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Shenzhen Ltd. Guangzhou Branch Room101/301/401/102/202/302/402/502/602/702/802, No. 7-2, Caipin Road, Huangpu District, Guangzhou, Guangdong, China Version: 17 August 2025 Page 2 of 62 FCC WIFI Applicant Name & Address : Echelon Fitness Multimedia LLC 605 Chestnut Street, 7th Floor Chattanooga TN 37450 United States Of America Manufacturing Site : Sundek Industrial Co., Limited TongFuYuXuFa Industrial Zoon, ShangCun Village, GongMing Town, BaoAn District Shenzhen City GuangDong 518106 China (Peoples Republich Of) Intertek Report No : 250908219GZU-001 FCC ID : 2AWD4-ECH-REFL-06 Test standards 47 CFR PART 15 Subpart C: 2024 section 15.247 Sample Description Product : Reflect 60 Fitness Mirror Model No. : ECH-REFL-06 Electrical Rating : AC100-240Vac 50/60Hz Serial No. : Not Labeled Date Received : 08 September 2025 Date Test Conducted : 13 January 2026-11 February 2026 Prepared and Checked By Elena Lei Project Engineer Approved By: Dean Liu Sr. Project Engineer TEST REPORT Intertek Report No.: 250908219GZU-001 Version: 17 August 2025 Page 3 of 62 FCC WIFI CONTENT TEST REPORT ........................................................................................................................... 1 CONTENT ............................................................................................................................. 3 1.0 TEST RESULT SUMMARY ............................................................................................ 4 2.0 GENERAL DESCRIPTION ............................................................................................. 5 2.1 PRODUCT DESCRIPTION ........................................................................................................ 5 2.2 RELATED SUBMITTAL(S) GRANTS ........................................................................................... 5 2.3 TEST METHODOLOGY .......................................................................................................... 6 2.4 TEST FACILITY ..................................................................................................................... 6 3.0 SYSTEM TEST CONFIGURATION ................................................................................. 6 3.1 JUSTIFICATION .................................................................................................................... 6 3.2 EUT EXERCISING SOFTWARE ................................................................................................. 7 3.3 SPECIAL ACCESSORIES .......................................................................................................... 7 3.4 MEASUREMENT UNCERTAINTY .............................................................................................. 8 3.5 EQUIPMENT MODIFICATION ................................................................................................. 8 3.6 SUPPORT EQUIPMENT LIST AND DESCRIPTION .......................................................................... 8 4.0 MEASUREMENT RESULTS ........................................................................................ 10 4.1 ANTENNA REQUIREMENT ................................................................................................... 10 4.2 6 DB BANDWIDTH (DTS BANDWIDTH).................................................................................. 11 4.3 DUTY CYCLE ..................................................................................................................... 18 4.4 MAXIMUM AVERAGE CONDUCTED OUTPUT POWER ............................................................... 21 4.5 PEAK POWER SPECTRAL DENSITY ......................................................................................... 23 4.6 OUT OF BAND CONDUCTED EMISSIONS ................................................................................ 30 4.7 RADIATED EMISSIONS ........................................................................................................ 37 4.8 BAND EDGES REQUIREMENT ............................................................................................... 54 4.9 CONDUCTED EMISSION TEST ............................................................................................... 59 5.0 TEST EQUIPMENT LIST ............................................................................................. 62 TEST REPORT Intertek Report No.: 250908219GZU-001 Version: 17 August 2025 Page 4 of 62 FCC WIFI 1.0 TEST RESULT SUMMARY Test Item Test Requirement Test Method Result Antenna Requirement FCC PART 15 C section 15.247 (c) and Section 15.203 FCC PART 15 C section 15.247 (…

Text truncated - open the document above for the full version.

Address:3015,3rdFloor,No.1SanweiSouthRoad,BaoıanDistrict,ShenzhenCity,GuangdongProvince TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] APPROVALSHEET CUSTOMER ： SundekIndustrialCo.,Limited ADDRESS: TongFuYuXuFaIndustrialZoon,ShangCunVillage,GongMingTown,BaoAn DistrictShenzhenCityGuangDong518106China(PeoplesRepublichOf) DESCRIPTION： 2.4-5.8GDualCopperTubeAntenna(FullHeatShrink)-1.13Cable -Exposed500MM-IPEX1 CUSPARTNO.： DATE： 2026/4/9 Yundingsignature ENGINEERINGDEPARTMENTQCDEPARTMENTSALESDEPARTMENT Customersignature ENGINEERINGDEPARTMENTQCDEPARTMENTPURCHASINGDEPARTMENT TEL:075523073599 Address:3015,3rdFloor,No.1SanweiSouthRoad,Bao'anDistrict,ShenzhenCity,GuangdongProvince TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 1.Testitemsandequipment TestitemsEquipment 1.S11-parameter 1.ReturnLoss 2.VSWR networkanalyzer:AgilentE5071B HP8753D 2.Activetest1.Transmittingpower 2.Receivingsensitivity 1.Darkroom ： ETS7x4x3m(3D)Chamber ETS5x3x3m(3D)Chamber 2.general-purposetester:Agilent8960E5515B×2 StarPointSP6011Cmw500 3 . Passivetest 1.Gain 2.Efficiency 1.Darkroom ： ETS7x4x3m(3D)Chamber ETS5x3x3m(3D)Chamber 2.networkanalyzer ： AgilentE5071B HP8753D Address:3015,3rdFloor,No.1SanweiSouthRoad,Bao'anDistrict,ShenzhenCity,GuangdongProvince TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 2.Antennaperformance SWR Address:3015,3rdFloor,No.1SanweiSouthRoad,Bao'anDistrict,ShenzhenCity,GuangdongProvince TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 3.Antennaefficiencyandgain PassiveTestForWIFI Freq (MHz) Effi (%) Gain (dBi) 240065.992.99 241061.322.62 242060.582.52 243061.752.58 244064.632.73 245066.862.86 246067.452.92 247068.533.02 248067.122.94 249064.572.74 250063.952.7 Address:3015,3rdFloor,No.1SanweiSouthRoad,Bao'anDistrict,ShenzhenCity,GuangdongProvince TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] Address:3015,3rdFloor,No.1SanweiSouthRoad,Bao'anDistrict,ShenzhenCity,GuangdongProvince TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 4.Antennastructurediagram ： C Address:3015,3rdFloor,No.1SanweiSouthRoad,Bao'anDistrict,ShenzhenCity,GuangdongProvince TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] Technicalparametersofelectricalappliances ElectricalSpecifications FrequencyRange 2400~2500/5100~5800MHz VSWR≤2.0 Gain3DBI InputImpedance 50Ω MechanicalSpecifications AntennaColorBlack InputconnectorIPEX1 exposedcablelength 60MM WorkingTemperature -40°C~+85°C WorkingHumidity 20~80% Address:3015,3rdFloor,No.1SanweiSouthRoad,Bao'anDistrict,ShenzhenCity,GuangdongProvince TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 5.Productphysicalpicture

Echelon Fitness Multimedia LLC TEST REPORT SCOPE OF WORK EMC TESTING–ECH-REFL-06 REPORT NUMBER 250908219GZU-003 ISSUE DATE [REVISED DATE] 24-April-2026 [--------------------] PAGES 49 DOCUMENT CONTROL NUMBER FCC BT 4.0 © 2017 INTERTEK TEST REPORT Room101/301/401/102/202/302/ 402/502/602/702/802, No. 7-2, Caipin Road, Huangpu District, Guangzhou, Guangdong, China Telephone: +86 20 8213 9688 Facsimile: +86 20 3205 7538 www.intertek.com.cn This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Shenzhen Ltd. Guangzhou Branch Room101/301/401/102/202/302/402/502/602/702/802, No. 7-2, Caipin Road, Huangpu District, Guangzhou, Guangdong, China Version: 03 December 2025 Page 2 of 49 FCC BT 4.0 Applicant Name & Address : Echelon Fitness Multimedia LLC 605 Chestnut Street, 7th Floor Chattanooga TN 37450 United States Of America Manufacturing Site : Sundek Industrial Co., Limited TongFuYuXuFa Industrial Zoon, ShangCun Village, GongMing Town, BaoAn District Shenzhen City GuangDong 518106 China (Peoples Republich Of) Intertek Report No: FCC ID: 250908219GZU-003 2AWD4-ECH-REFL-06 Test standards 47 CFR PART 15 Subpart C: 2024 section 15.247 Sample Description Product : Reflect 60 Fitness Mirror Model No. : ECH-REFL-06 Electrical Rating : AC100-240Vac 50/60Hz Serial No. : Not Labeled Date Received : 08 September 2025 Date Test Conducted : 13 January 2026-11 February 2026 Prepared and Checked By Elena Lei Project Engineer Approved By: Dean Liu Sr. Project Engineer TEST REPORT Intertek Report No.: 250908219GZU-003 Version: 03 December 2025 Page 3 of 49 FCC BT 4.0 CONTENT TEST REPORT ........................................................................................................................... 1 CONTENT ............................................................................................................................. 3 1.0 TEST RESULT SUMMARY ............................................................................................ 4 2.0 GENERAL DESCRIPTION ............................................................................................. 5 2.1 PRODUCT DESCRIPTION ........................................................................................................ 5 2.2 RELATED SUBMITTAL(S) GRANTS ........................................................................................... 5 2.3 TEST METHODOLOGY .......................................................................................................... 6 2.4 TEST FACILITY ..................................................................................................................... 6 3.0 SYSTEM TEST CONFIGURATION ................................................................................. 6 3.1 JUSTIFICATION .................................................................................................................... 6 3.2 EUT EXERCISING SOFTWARE ................................................................................................. 7 3.3 SPECIAL ACCESSORIES .......................................................................................................... 7 3.4 MEASUREMENT UNCERTAINTY .............................................................................................. 8 3.5 EQUIPMENT MODIFICATION ................................................................................................. 8 3.6 SUPPORT EQUIPMENT LIST AND DESCRIPTION .......................................................................... 8 4.0 MEASUREMENT RESULTS ........................................................................................ 10 4.1 ANTENNA REQUIREMENT ................................................................................................... 10 4.2 6 DB BANDWIDTH (DTS BANDWIDTH).................................................................................. 11 4.3 MAXIMUM PEAK CONDUCTED OUTPUT POWER ..................................................................... 16 4.4 PEAK POWER SPECTRAL DENSITY ......................................................................................... 21 4.5 OUT OF BAND CONDUCTED EMISSIONS ................................................................................ 26 4.6 RADIATED EMISSIONS ........................................................................................................ 31 4.7 BAND EDGES REQUIREMENT ............................................................................................... 42 4.8 CONDUCTED EMISSION TEST ............................................................................................... 46 5.0 TEST EQUIPMENT LIST ............................................................................................. 49 TEST REPORT Intertek Report No.: 250908219GZU-003 Version: 03 December 2025 Page 4 of 49 FC…

Text truncated - open the document above for the full version.