2AWEN-SY130Bluetooth Speaker

FLAME RGB LIGHT UP BLUETOOTH SPEAKER Bluetooth 5.3 Wireless range: 10m Color changing LED light effects Built-in USB & TF port Type-C port for battery recharge Built-in rechargeable battery Battery life: approx. 3.5hrs at 50% volume 1 x Flame RGB Light up Bluetooth speaker 1 x Type-C to USB charging cable 1 x User manual LED Charging indicator GETTING STARTED FEATURES INCLUDES CONTROL PANEL Please charge fully before use. The charge time is approximately 3 hours. When the unit is charging, the LED charging indicator will display a solid red light. When charging is complete, the i ndicator will turn off. Using a Type-C to USB charging cable(included in the package), connect the Type-C charging socket on the speaker to a USB port of a powered-on computer or a USB power adapter(not included) to charge the battery. BATTERY POWER 1. 2. 3. Switch the ON/OFF button to ON to turn on the Bluetooth speaker, you will hear “Bluetooth mode pairing” and the LED indicator will flash blue quickly. Using your Bluetooth phone or Bluetooth device, turn on Bluetooth and search for Bluetooth devices. Select Pro PSP141 from the list of devices. When successfully paired, you will hear "connected", and the LED indicator will on blue. Use the controls on the connected Bluetooth device to select and begin playing audio. Use the controls on the device or the speaker to play, pause, skip tracks or adjust volume. PAIRRING BLUETOOTH To listen to music via TF card or USB drive, insert the TF card into the memory card slot, or insert the USB drive into the USB port. The speaker will automatically detect the input and begin playing audio. Use the speaker controls to play, pause, skip tracks, and adjust the volume. USB/TF CARD PLAY Connect 3.5mm wired microphone (not included) to the MIC input of the unit, and then you are ready to sing along with your bluetooth smart device. MICROPHONES CONNECTED Get two same units and power on both units, then entering to Bluetooth pairing mode. Power on this unit and switch mode to FM mode. Press and hold play/pause button to enter auto scan feature and automatic storage of radio stations. Press -/+ button to select the FM radio station. Press play/pause button to mute the music. Don't connect to any Bluetooth devices before TWS pairing. Press twice the play/pause button from either unit to enter to TWS pairing mode. It will pair both units after a few seconds with a voice 'Du'. Turn on the Bluetooth from your Bluetooth device. Search the Bluetooth pair name 'Pro PSP141' and tap to connect this unit. You can play songs now from your Bluetooth devices. Press and hold play/pause button again to disconnect the TWS mode. HOW TO WORK FOR SPEAKER PAIRING TWS MODE Power on this unit and switch mode to Bluetooth mode, do not connect to any Bluetooth devices. Inserted 3.5mm cable into this MIC jack, the other side connected to external audio devices, turned up the volume over 70% from external audio devices. Now you can play music from AUX in mode. Note: Due to this 3.5mm jack combine with microphone and AUX IN features, the sound may have a little echo when played music from AUX IN mode. If you want better sound, please play music via Bluetooth mode. AUX INPUT CONNECTION There are seven modes of color changing LED light effects. The LED light comes on automatically when your turn on the Bluetooth speaker. Press and hold the mode button for 2 seconds to change the LED light effects mode. After the light modes are displayed in turn, hold the mode button for 2 seconds to turn off the light. Note: In FM mode, the color changing LED Light will not available. COLOR CHANGING LED LIGHT EFFECTS HOW TO WORK FOR RADIO FM FUNCTION Please read these instructions thoroughtly before use and retain for future reference Powerful, full range audio with spacious, immersive, Color changing LED light effects MIC & USB & FM & TF card reader PROSCAN, and the PROSCAN logo are trademarks used under license by CURTIS INTERNATIONAL LTD. – www.proscan-brand.com 1 OFF ON 2 MIC Switch to ON to turn on the speaker, switch to OFF to turn off the speaker. 3.5mm Microphone and AUX Input. 3 Type-C Charging Socket Used to charge the battery. 4 TF CARDTF card input. 5 USBUSB input. 6 Press to switch between Bluetooth and Radio FM mode. You can switch to TF or USB if connected. Press and hold to change the LED light mode. 7 Press to switch to the previous track. Press and hold to decrease the volume. 8 Press to play or pause. In FM mode, press the button to mute, press and hold the button to enter auto scan feature. Double press the button to enter TWS connecting in Bluetooth mode. . 9 Press to switch to the next track. Press and hold to increase the volume. PSP141_DG To make a warranty claim. Please email [email protected] or call 1-800-968-9853 This product is warranted to be free from defects in material and workmanship for a period of ninety (90) days from the date of original purchase. During this period, your exclusive remedy is repair or replacement of this product or component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us. If the product or component is no longer available, we will replace with a similar one of equal or greater value. Prior to a replacement being sent, the product must be rendered inoperable or returned to us. This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions., or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as on the specified rating on the label (e.g., 120V~60Hz). We exclude all claims for special, incidental, and con…

Text truncated - open the document above for the full version.

DONGGUAN MORITAKE INDUSTRIAL CO.,LTD 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: DONGGUAN MORITAKE INDUSTRIAL CO.,LTD Address: Building B, no. 68, xixing third street, changping town, dongguan city China Product Name: Bluetooth Speaker FCC ID: 2AWEN-SY130 Model(s): SY130, PSP141, PSP141_DG, PBS-203 2.911(d)(5)(i) Equipment Type We, [ DONGGUAN MORITAKE INDUSTRIAL CO.,LTD ] (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Wei Li Date: 2023-07-11 Title and Company name: Manager NOTE 1 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

DONGGUAN MORITAKE INDUSTRIAL CO.,LTD 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: DONGGUAN MORITAKE INDUSTRIAL CO.,LTD Address: Building B, no. 68, xixing third street, changping town, dongguan city China Product Name: Bluetooth Speaker FCC ID: 2AWEN-SY130 Model(s): SY130, PSP141, PSP141_DG, PBS-203 2.911(d)(5)(ii) Applicant filing We, [DONGGUAN MORITAKE INDUSTRIAL CO.,LTD ] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Wei Li Date: 2023-07-11 Title and Company name: Manager NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

DONGGUAN MORITAKE INDUSTRIAL CO.,LTD 2. 911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: DONGGUAN MORITAKE INDUSTRIAL CO.,LTD Address: Building B, no. 68, xixing third street, changping town, dongguan city China Product Name: Bluetooth Speaker FCC ID: 2AWEN-SY130 Model(s): SY130, PSP141, PSP141_DG, PBS-203 2.911( d)(7) USA Designated Agent for Service of Process We, [ DONGGUAN MORITAKE INDUSTRIAL CO.,LTD ] (“the applicant”) designate [THREE STONES MEDIA LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant Company name: DONGGUAN MORITAKE INDUSTRIAL CO.,LTD Address: Building B, no. 68, xixing third s treet, changping town, dongguan city China FCC Grantee Code: 2AWEN Contact Name: Wei Li Telephone No: 13530544168 Em ail: [email protected] USA Agent Company name: THREE STONES MEDIA LLC Address: 1200 Broadway St. APT 329, Los Angeles, CA90015 FRN: 0033401761 Contact Name: Sijie Zhang Telephone No: +1 267 909 3692 Email: [email protected] Signature: Title: Manager Date: 2023-07-12 Signature: Title: Manager Date: 2023-07-12 DONGGUAN MORITAKE INDUSTRIAL CO.,LTD 2.911 (d)(7)USA Agent v1.2 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threat s-to -the-communications-supply-chain-through-the

Differences Declaration To whom concern, We company DONGGUAN MORITAKE INDUSTRIAL CO.,LTD Here by declares: The product model(s) PSP141, PSP141_DG, PBS-203 are identical in the PCB layout, electronic schematic and antenna with SY130, only different in model names. Sincerely yours, Name (in print): Wei Li Company name: DONGGUAN MORITAKE INDUSTRIAL CO.,LTD Company address: Building B, no. 68, xixing third street, changping town, dongguan city China Te l : 13530544168

DONGGUAN MORITAKE INDUSTRIAL CO.,LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-07-10 Subject; Request for Long Term Confidentiality FCC ID: 2AWEN-SY130 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Wei Li Title: Manager

Letter of Authorization Company: DONGGUAN MORITAKE INDUSTRIAL CO.,LTD Address: Building B, no. 68, xixing third street, changping town, dongguan city China Product Name: Bluetooth Speaker Model Number: SY130, PSP141, PSP141_DG, PBS-203 FCC Identifier: 2AWEN-SY130 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Wei Li Date: 2023-0 7-11 Title: Manager

Test Report Number: BTF230620R00201 External Test Report Number: BTF230620R00201 Test Report Number: BTF230620R00201 Test Report Number: BTF230620R00201

Label&Location Bluetooth Speaker Model: SY130 FCC ID: 2AWEN-SY130

Test Report Number: BTF230620R00201 Internal Test Report Number: BTF230620R00201 Test Report Number: BTF230620R00201

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Exposure Report For Applicant Name: DONGGUAN MORITAKE INDUSTRIAL CO.,LTD Address: Building B, no. 68, xixing third street, changping town, dongguan city China EUT Name: Bluetooth Speaker Brand Name: N/A Model Number: SY130 Series Model Number: Refer to section 2 Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF230620R00202 Test Standards: 47 CFR Part 2 Subpart J Section 2.1091 FCC ID: 2AWEN-SY130 Test Conclusion: Pass Test Date: 2023-06-20 to 2023-06-29 Date of Issue: 2023-06-30 Prepared By: elma.yang / Project Engineer Date: 2023-06-30 Approved By: Ryan.CJ / EMC Manager Date: 2023-06-30 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF230620R00202 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-06-30 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF230620R00202 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1. Introduction .............................................................................................................................................................................................. 4 1.1 Identification of Testing Laboratory ................................................................................................................................... 4 1.2 Identification of the Responsible Testing Location ....................................................................................................... 4 1.3 Laboratory Condition ............................................................................................................................................................. 4 1.4 Announcement ......................................................................................................................................................................... 4 2. Product Information ................................................................................................................................................................................ 5 2.1 Application Information ......................................................................................................................................................... 5 2.2 Manufacturer Information ..................................................................................................................................................... 5 2.3 Factory Information ................................................................................................................................................................ 5 2.4 General Description of Equipment under Test (EUT).................................................................................................... 5 3. REQUIREMENT ..................................................................................................................................................................................... 6 3.1 Assessment Result ................................................................................................................................................................. 6 Test Report Number: BTF230620R00202 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 4 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China 1. Introduction 1.1 Identification of Testing Laboratory Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Phone Number: +86-0755-23146130 Fax Number: +86-0755-23146130 1.2 Identification of the Responsible Testing Location Test Location: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Description: All measurement facilities used to collect the measurement data are located at F101,201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China FCC Registration Number: 518915 Designation Number: CN1330 1.3 Laboratory Condition Ambient Temperature: 20°C to 25°C Ambient Relative Humidity: 45% to 55% Ambient Pressure: 100 kPa to 102 kPa 1.4 Announcement (1) The test report reference to the report template version v0. (2) The test report is invalid if not marked with the signatures of the persons responsible for preparing, reviewing and approving the test report. (3) T…

Text truncated - open the document above for the full version.

Inverted F Antenna Specification Summary ITEM ANT SPEC Model Name 2.4G ANT Horizontal Vertical 2400MHz 2400MHz2500MHz2400MHz2400MHz 2500MHz Center Frequency -1.26 -0.76 -0.58 -5.25 -2.46 -1.86 MAX. Gain -0.58dB Polarization Horizontal and Vertical Azimuth Beam Pattern Omni-directional Impedance 50 Ohm Antenna Length 38.20mm Manufacture ZHUHAI JIELI TECHNOLOGY CO.,LTD Antenna Photo & Length (mm) Horizontal: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -40 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -1.26174 -30.0801 -7.18716 2450 -0.765802 -36.5604 -7.48023 2500 -0.585582 -22.0315 -6.59127 Vertical: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -30 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -5.2537 -22.1424 -12.4294 2450 -2.4652 -24.5837 -10.4702 2500 -1.86120 -29.5214 -9.20432 ANT Test Labs：Attestation of Global Compliance Co., Ltd.

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 105 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Test Report For Applicant Name: DONGGUAN MORITAKE INDUSTRIAL CO.,LTD Address: Building B, no. 68, xixing third street, changping town, dongguan city China EUT Name: Bluetooth Speaker Brand Name: N/A Model Number: SY130 Series Model Number: Refer to section 2 Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF230620R00201 Test Standards: 47 CFR Part 15.247 Test Conclusion: Pass FCC ID: 2AWEN-SY130 Test Date: 2023-06-20 to 2023-06-29 Date of Issue: 2023-06-30 Prepared By: elma.yang / Project Engineer Date: 2023-06-30 Approved By: Ryan.CJ / EMC Manager Date: 2023-06-30 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF230620R00201 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 105 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-06-30 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF230620R00201 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 105 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1 INTRODUCTION...................................................................................................................................... 5 1.1 Identification of Testing Laboratory ............................................................................................ 5 1.2 Identification of the Responsible Testing Location ................................................................... 5 1.3 Announcement ............................................................................................................................. 5 2 PRODUCT INFORMATION...................................................................................................................... 6 2.1 Application Information ............................................................................................................... 6 2.2 Manufacturer Information ............................................................................................................ 6 2.3 Factory Information ..................................................................................................................... 6 2.4 General Description of Equipment under Test (EUT) ................................................................ 6 2.5 Technical Information .................................................................................................................. 6 3 SUMMARY OF TEST RESULTS.............................................................................................................. 7 3.1 Test Standards ............................................................................................................................. 7 3.2 Uncertainty of Test ....................................................................................................................... 7 3.3 Summary of Test Result .............................................................................................................. 7 4 TEST CONFIGURATION ......................................................................................................................... 8 4.1 Test Equipment List ..................................................................................................................... 8 4.2 Test Auxiliary Equipment ........................................................................................................... 13 4.3 Test Modes ................................................................................................................................. 13 5 EVALUATION RESULTS (EVALUATION) ............................................................................................. 14 5.1 Antenna requirement ................................................................................................................. 14 6 RADIO SPECTRUM MATTER TEST RESULTS (RF) ............................................................................ 14 6.1 Conducted Emission at AC power line ..................................................................................... 14 6.1.1 E.U.T. Operation: .............................................................................................................. 14 6.1.2 Test Setup Diagram: ......................................................................................................... 14 6.1.3 Test Data: ......................................................................................................................... 16 6.2 Occupied Bandwidth.................................................................................................................. 18 6.2.1 E.U.T. Operation: .............................................................................................................. 19 6.2.2 …

Text truncated - open the document above for the full version.

Test Report Number: BTF230620R00201 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 77 of 105 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China 5.1.2 Test Graph GFSK_DH1_HOPP_Ant1_NTNV GFSK_DH1_HOPP_Ant1_NTNV Test Report Number: BTF230620R00201 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 78 of 105 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China GFSK_DH3_HOPP_Ant1_NTNV GFSK_DH3_HOPP_Ant1_NTNV Test Report Number: BTF230620R00201 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 79 of 105 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China GFSK_DH5_HOPP_Ant1_NTNV GFSK_DH5_HOPP_Ant1_NTNV Test Report Number: BTF230620R00201 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 80 of 105 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Pi/4DQPSK_2DH1_HOPP_Ant1_NTNV Pi/4DQPSK_2DH1_HOPP_Ant1_NTNV Test Report Number: BTF230620R00201 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 81 of 105 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Pi/4DQPSK_2DH3_HOPP_Ant1_NTNV Pi/4DQPSK_2DH3_HOPP_Ant1_NTNV Test Report Number: BTF230620R00201 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 82 of 105 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Pi/4DQPSK_2DH5_HOPP_Ant1_NTNV Pi/4DQPSK_2DH5_HOPP_Ant1_NTNV Test Report Number: BTF230620R00201 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 83 of 105 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China 8DPSK_3DH1_HOPP_Ant1_NTNV 8DPSK_3DH1_HOPP_Ant1_NTNV Test Report Number: BTF230620R00201 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 84 of 105 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, She…

Text truncated - open the document above for the full version.