2AWH3SRXXAAWiFi Bluetooth Module

PRODUCTSPECIFICATIONVersion1.0 IEEE802.11b/g/n1T/1RUSBModule IntegratedBluetoothv2.1/3.0/4.2 ModelNumber: (Realtek：RTL8723DU) 客户认可 CustomApprovalSection CustomName Department Approval Date ： DESIGNCHECKAPPROVAL XuhuanHoudeweiGaozhao 2023-7-212023-7-212023-7-21 MT9632 PRODUCTSSPECIFICATION PAGE 2 OF14 Version1.0 Documentrevisionhistory RevisionDateApprovedbyRemarks Version1.02023-7-21Draft PRODUCTSSPECIFICATION PAGE 3 OF14 Version1.0 1.GeneralDescription Thisdocumentistospecifytheproductrequirementsfor802.11 b/g/nUSBModule.ThisCardis basedonRealtekRTL8723DUchipsetthatcompliedwithIEEE802.11b/g/nstandardfrom2.4~2.5GHz.It canbeusedtoprovideupto54MbpsforIEEE802.11g,11MbpsforIEEE802.11band150MbpsforIEEE 802.11ntoconnectyourwirelessLAN.TheBluetoothcontrollercomplieswithBluetoothcorespecification v,andsupportsmode(LowEnergyControllers). 2.Features  CompatiblewithIEEE802.11bstandardtoprovidewireless11Mbpsdatarate  CompatiblewithIEEE802.11gstandardtoprovidewireless54Mbpsdatarate  CompatiblewithIEEE802.11nstandardtoprovidewireless150Mbpsdatarate  Operationat2.4~2.5GHzfrequencybandtomeetworldwideregulations  Bluetoothv5.0LowEnergy(LE)  802.11i(WPA,WPA2).Open,sharedkey,andpair-wisekeyauthenticationservices  WAPIsupported  DriverssupportWindows,Android,Linux  RoHScompliant. 5.0 PRODUCTSSPECIFICATION PAGE 4 OF14 Version1.0 3.ApplicationDiagrams 3.1FunctionalBlockDiagram 5V转3.3V 5V . Tx0/Rx0 InterfaceSignals Tx1/Rx1 U S B I n t e r f a c e RTL8723DU 40MHz XTAL WiFiAntenna BTAntenna PRODUCTSSPECIFICATION PAGE 5 OF14 Version1.0 3.2GeneralRequirements 3.2.1IEEE802.11bSection FeatureDetailedDescription 3.2.1.1 Standard●IEEE802.11b 3.2.1.2 Radioand Modulation Schemes ●DQPSK,DBPSKandCCKwithDSSS 3.2.1.3 Operating Frequenc y ●2400～2483.5MHzISMband 3.2.1.4 ChannelNumbers●13channelsforWorldwide 3.2.1.5 DataRate●atmost11Mbps 3.2.1.6 MediaAccess Protocol ●CSMA/CAwithACK 3.2.1.7 TransmitterOutput PoweratAntenna Connector ●TypicalRFOutputPowerateachRFchain,and atroomTemp.25°C ●21.651dBmat11Mbps 3.2.1.8 Receiver Sensitivity atAntenna Connector ●TypicalSensitivityateachRFchain.@Frame(1000-bytePDUs) ErrorRate<8%atroomTemp25°C ●-83dBmfor11Mbps 3.2.2IEEE802.11gSection FeatureDetailedDescription 3.2.2.1 Standard●IEEE802.11g 3.2.2.2 Radioand ModulationType ●QPSK,BPSK,16QAM,64QAMwithOFDM 3.2.2.3 Operating Frequenc y ●2400～2483.5MHzISMband 3.2.2.4 ChannelNumbers●13channelsforWorldwide 3.2.2.5 DataRate●atmost54Mbps 3.2.2.6 MediaAccess Protocol ●CSMA/CAwithACK 3.2.2.7 TransmitterOutput PoweratAntenna Connector ●TypicalRFOutputPowerateachRFchain, atroomTem p.25°C ●21.896dBmat54Mbps 3.2.2.8 Receiver Sensitivity atAntenna Connector ●TypicalSensitivityateachRFchain.@Frame(1000-bytePDUs) ErrorRate<10%atroomTemp25°C ●-71dBmfor54Mbps PRODUCTSSPECIFICATION PAGE 6 OF14 Version1.0 3.2.3IEEE802.11nSection FeatureDetailedDescription 3.2.3.1 Standard●IEEE802.11n 3.2.3.2 Radioand ModulationT ype ●BPSK,QPSK,16QAM,64QAMwithOFDM 3.2.3.3 Operating Frequency ●2400～2483.5MHzISMband ●ChannelFrequencyforHT20:2412～2472MHZ ●ChannelFrequencyforHT40:2422～2462MHZ 3.2.3.4 DataRate(Mbps)●atmost150Mbps 3.2.3.5 MediaAccess Protocol ●CSMA/CAwithACK 3.2.3.6 TransmitterOutput PoweratAntenna Connector ●TypicalRFOutputPowerateachRFchain,DataRateandatroom Temp.25°C ●ChannelFrequencyforHT20 ●21.964dBmatMCS7 ●ChannelFrequencyforHT40 ●21.564dBmatMCS7 3.2.3.7Receiver Sensitivity atAntenna Connector ●TypicalSensitivityatWhichFrame(1000-bytePDUs)Error Rate=10% HT20 ●-68dBmatMCS7 HT40 ●-66dBmatMCS7 3.2.4BluetoothSection FeatherDescription Generalspecification BluetoothstandardBluetoothV5.0 Frequencyband2402MHz-2480MHz ChannelNumbers 40channelsforBLE ModulationGFSK RFspecification Min（dBm）Type（dBm）Max（dBm） BDROutputPower5 BLEOutputPower5 Sensitive@BER=0.1%FOR GFSK(1Mbps) -86 Sensitive@BER=0.01%FOR π/4-DQPSK(2Mbps) -86 Sensitive@BER=0.01%FOR 8DPSK(3Mbps) -80 MaximuminputlevelGFSK(1Mbps)-20dBm Sensitive@PER=30.8%FOR BLE -90 PRODUCTSSPECIFICATION PAGE 7 OF14 Version1.0 4.ElectricalandThermalCharacteristics 4.1TemperatureLimitRatings ParameterMinimumMaximumUnits StorageTemperature-40+80 °C AmbientOperatingTemperature060 °C JunctionTemperature0125 °C 4.2GeneralSection FeatureDetailedDescription 4.2.1AntennaType ●WIFI&BT：IPEX 4.2.2OperatingVoltage●5V±10% 4.2.3CurrentConsumption ●＜300mA@RX ●＜500mA@TX 4.2.4Interface●HighSpeedUSB2.0Interface 4.3Software DriverWindows,Linux,Android Security64/128-bitsWEP,WPA,WPA2 5.EEPROMInformation RegDomain Worldwide2.4G Readfromregistry；Controlbydriver Offset0xB8for2.4G:0x20 VendorID0x0BDA ProductID0xD723 6.MechanicalDimensions Unit：mm PRODUCTSSPECIFICATION PAGE 8 OF14 Version1.0 PINPINSYMBOLDESCRIPTION 1NCNC 2NCNC 3BT_WAKE_HOSTBT_WAKE_HOST 4GNDGND 5WL_WAKE_HOSTWL_WAKE_HOST 6Power_ENReset 7GNDGND 8WL_USB_DPWL_USB_DP 9WL_USB_DNWL_USB_DN 10VCC5V 说明： Pin3BT_WAKE_HOST ： Pin19ofthebuilt-inRTL8723DU. Pin5WLAN_WAKE_HOST：Internalpin20ofRTL8723DU,internal100KPullUp. Pin6Power_EN：power_enpinforDC-DC(5Vto3.3V)isconnectedtocontrolDC-DC. Note:WIFIandBTsharethesameaddresssegment,butthesameaddressdoesnotoccur。 7.USBinterfaceelectricalcharacteristics DIM(mm) Tolerance(mm) 0-5 ±0.15 5-10 ±0.20 10-50 ±0.30 50-100 ±0.40 FCC Statements: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Changes or modifications to this unit not expressly approved by the party responsible for compliance coul…

Text truncated - open the document above for the full version.

C5266091_X9_Ed.2 1/1 Beijing BOE Sales Co.,LTD Modular Transmitter Approval Request Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Company name: Beijing BOE Sales Co.,LTD FCC ID: 2AWH3SRXXAA Gentlemen, In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Certification Guide v02’. FCC ID: 2AWH3SRXXAA has been examined against the following requirements. Items to be covered by Single modular transmitters. Requirement per 15.212 and KDB 996369 D01 ‘Modular Certification Guide v02 Explanation from Grantee (do not write yes/no, but explain why product complies/how it is achieved) 1. The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly Yes The model with shielding cover, Single modular approval. 2. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal Yes Buffered data inputs stage has been integrated in chip RTL8723DU. 3. The module must contain power supply regulation on the module Yes The power regulator has been integrated in chip RTL8723DU. 4. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) The requirements of antenna connector and spurious emission have been fulfilled. Please reference the exhibition Test Report. 5. The module must demonstrate compliance in a stand- alone configuration Please reference exhibition Test Configuration Photo for the stand-alone test configuration. 6. The module must be labelled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements) The instruction on the labelling rule of the end product has been stated in the Users manual of this module. Please also see the exhibition Label Sample. 7. The module must comply with all specific rules applicable to the transmitter including all the conditions provided in the integration instructions by the grantee The required FCC rule has been fulfilled and all the instructions for maintaining compliance has been clearly stated in the Users Manual. 8. The module must comply with RF exposure requirements Please refer exhibition RF Exposure for the compliance of MPE RF exposure rule. C5266091_X9_Ed.2 1/1 Items to be covered by Split modular transmitters. Requirement per 15.212 and KDB 996369 D01 ‘Modular Certification Guide v02 Explanation from Grantee (do not write yes/no, but explain why product complies/how it is achieved) 9. Split modular transmitters must meet all the requirements of a single modular in above item1 and 5 for single modular approval requirements. 10. Only the radio front end must be shielded. The physical crystal and tuning capacitors may be located external to the shielded radio elements. The interface between the split sections of the modular system must be digital with a minimum signaling amplitude of 150 mV peak-to-peak. 11. Control information and other data may be exchanged between the transmitter control elements and radio front end. 12. The sections of a split modular transmitter must be tested installed in a host device(s) similar to that which is representative of the platform(s) intended for use. 13. Manufacturers must ensure that only transmitter control elements and radio front end components that have been approved together are capable of operating together. The transmitter module must not operate unless it has verified that the installed transmitter control elements and radio front end have been authorized together. Manufacturers may use means including, but not limited to, coding in hardware and electronic signatures in software to meet these requirements, and must describe the methods in their application for equipment authorization. A limited modular approval (LMA) may be granted for single or split modular transmitters that comply partially with requirements above. Name: Fangzhou Zhang Date: 2023/07/21 Title: N/A Signature of applicant

FCC ID: 2AWH3SRXXAA External & Internal photos WIFI Antenna BT Antenna FCC ID: 2AWH3SRXXAA RF chip FCC ID: 2AWH3SRXXAA FCC ID: 2AWH3SRXXAA FCC ID: 2AWH3SRXXAA FCC ID: 2AWH3SRXXAA

Label & Location Location

FCC ID: 2AWH3SRXXAA External & Internal photos WIFI Antenna RF chip BT Antenna FCC ID: 2AWH3SRXXAA FCC ID: 2AWH3SRXXAA FCC ID: 2AWH3SRXXAA FCC ID: 2AWH3SRXXAA

Report No.: NTC2306212F01 Dongguan Nore Testing Center Co., Ltd. Address: Building D, Gaosheng Science and Technology park, Hongtu road, Nancheng district, Dongguan city, Guangdong province, China Web: www.ntc-c.com Tel:+86-769-2202 2444 Fax:+86-769-2202 2799 Page 1 of 9 RF EVALUATION TEST REPORT Applicant......................... : Beijing BOE Sales Co.,LTD Address........................... : No.12 Xihuanzhong RD, BDA, Beijing, 100176, P.R.China Manufacturer.................... : Beijing BOE Sales Co.,LTD Address........................... : No.12 Xihuanzhong RD, BDA, Beijing, 100176, P.R.China Factory........................... : Kontech Electronics Co.,Ltd Address.......................... : 2nd Floor No.2 building ,Detai Technology Industrial Park ,Huarong Road , Longhua district, Shenzhen China 518109 Product Name.................. : WiFi Bluetooth Module Brand Name....................... : N/A Model No. .......................... : MT9632 FCC ID............................ : 2AWH3SRXXAA Measurement Standard....... : 47 CFR PART 2, Section 2.1091 Receipt Date of Samples.... : June 15, 2023 Date of Tested.................. : June 15, 2023 to July 07, 2023 Date of Report.................. : July 20, 2023 This report shows that above equipment is technically compliant with the requirements of the standards above. All test results in this report apply only to the tested sample(s). Without prior written approval of Dongguan Nore Testing Center Co., Ltd, this report shall not be reproduced except in full. Prepared by Rose Hu / Project Engineer Approved by Iori Fan / Authorized Signatory Report No.: NTC2306226F01 Page 2 of 9 Table of Contents 1. General Description of EUT ................................................................................................................................ 4 2. Test Facility and Location ................................................................................................................................... 6 3. Applicable Standards and References ................................................................................................................ 6 4. Maximum Permissible Exposure Limit ................................................................................................................ 7 5. RF Exposure Evaluation Results ........................................................................................................................ 9 Report No.: NTC2306226F01 Page 3 of 9 Revision History Report Number Description Issued Date NTC2306226F01 Initial Issue 2023-07-20 Report No.: NTC2306226F01 Page 4 of 9 1. General Description of EUT Product Information Product Name: WiFi Bluetooth Module Main Model Name: MT9632 Additional Model Name: N/A Model Difference: N/A S/N: 2304-2121 Brand Name: N/A Hardware Version: V1.0 Software Version: V1.0 Rating: DC 5V Typical arrangement: Tabletop / Built-in I/O Port: Refer to user manual Accessories Information Adapter: N/A Cable: N/A Other: N/A Additional information Note: N/A Remark: All the information above are provided by the manufacturer. More detailed feature of the EUT please refers to the user manual. Report No.: NTC2306226F01 Page 5 of 9 Technical Specification Bluetooth Version: V5.0 Frequency Range: 2402-2480MHz Modulation Type: GFSK Number of Channel: 40 (refer to following channel list for details) Channel Space: 2MHz Antenna Type: Dipole antenna Number of Antenna 1 Antenna Gain: 3.84 dBi (Declared by the manufacturer) RF PHY Support: 1Mbps Technical Specification Frequency Range: 2412-2462MHz for IEEE 802.11b/g/n(HT20) 2422-2452MHz for IEEE 802.11n(HT40) Modulation Technology: DSSS, OFDM Modulation Type: CCK, DQPSK, DBPSK, QPSK, BPSK, 16-QAM, 64-QAM, Number of Channel: 11 for IEEE 802.11b/g/n(HT20) 7 for IEEE 802.11n(HT40) Channel Space: 5MHz Antenna Type: Dipole antenna Number of Antenna 1 Antenna Gain: 3.84 dBi (Declared by the manufacturer) Report No.: NTC2306226F01 Page 6 of 9 2. Test Facility and Location Test Site : Dongguan Nore Testing Center Co., Ltd. (Dongguan NTC Co., Ltd.) Accreditations and Authorizations : The Laboratory has been assessed and proved to be in compliance with CNAS/CL01 Listed by CNAS, August 13, 2018 The Certificate Registration Number is L5795. The Certificate is valid until August 13, 2024 The Laboratory has been assessed and proved to be in compliance with ISO17025 Listed by A2LA, November 01, 2017 The Certificate Registration Number is 4429.01 Listed by FCC, November 06, 2017 Test Firm Registration Number: 907417 Listed by Industry Canada, June 08, 2017 The Certificate Registration Number. Is 46405-9743A Test Site Location : Building D, Gaosheng Science and Technology Park, Hongtu Road, Nancheng District, Dongguan City, Guangdong Province, China 3. Applicable Standards and References According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards: Test Standards: 47 CFR Part 1, 1.1307 47 CFR Part 2, 2.1091 KDB 447498 D04 v01 Report No.: NTC2306226F01 Page 7 of 9 4. Maximum Permissible Exposure Limit According to 47 CFR Part 1, 1.1307, for single RF sources (i.e., any single fixed RF source, mobile device, or portable device, as defined in paragraph (b)(2) of this section): A single RF source is exempt if: 47 CFR Part 1, 1.1307 (A) The available maximum time- averaged power is no more than 1 mW, regardless of separation distance. This exemption may not be used in conjunction with other exemption criteria other than those in paragraph (b)(3)(ii)(A) of this section. Medical implant devices may only use this exemption and that in paragraph (b)(3)(ii)(A); (B) Or the available maximum time- averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold P th (mW) described in the following formula. This method shall only be used at separation distances (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 G…

Text truncated - open the document above for the full version.

ShenZhen City FeiMin Technology CO.,LTD. SPECIFICATION FOR APPROVED CUSTOMER: Shenzhen kangrong electronics co., ltd PRODUCTS: J14-2.4G glue stick PART NO: Spec.: FM-S1406-2.4G glue stick Data: 2023.06.25 REMARK:Please send us one(or copy)of this approval with stamp after accepting,other copies filed by the customer. ADD:Room 303,Building C,Hengnan one Road,Gushu community,Xixiang Street,Bao’an District,Shenzhen City Tel: 0755-23035723 Fax: 0755-23036702 E-mail: [email protected] HTTP:www.fmant.cn CUSTOMER ACCEPTED BY CHECKED BY APPROVED BY SUPPLIER PREPARED BY CHECKED BY APPROVED BY FanMa XingxiXia DongdongMa ANTENNA SPECIFICATION Shenzhen Feimin Technology Co.,Ltd 2 目录 1. Project Information ................................................................................... 4 1.1. Appearance and Dimensions ............................................................ 4 2. Electrical Characteristics .......................................................................... 5 2.1. Test Environment Conditions ........................................................... 5 2.2. Measurement method ....................................................................... 5 2.2.1. Antenna VSWR ........................................................................... 5 2.2.2. Antenna Return loss ........................................................... 6 2.3. Antenna passive test data ................................................. 6 2.3.1. Test system ............................................................................... 6 2.3.2.Antenna efficiency and gain .......................................... 7 2.3.2. Antenna Radiation Pattern ................................................... 7 3.Notes ........................................................................................................... 8 4.Product packaging specification ................................................................. 8 ANTENNA SPECIFICATION Shenzhen Feimin Technology Co.,Ltd 3 Revision history version date condition A1 2023-06-25 First edition Changes: First change: Before the change: (If necessary, please add corresponding pictures, and the details of the change should be clearly described here) After the change: (If necessary, please add corresponding pictures, and the details of the change should be clearly described here) ANTENNA SPECIFICATION Shenzhen Feimin Technology Co.,Ltd 4 1. Project Information 1.1. Appearance and Dimensions ANTENNA SPECIFICATION Shenzhen Feimin Technology Co.,Ltd 5 2. Electrical Characteristics 2.1. Test Environment Conditions Temperature Ordinary Temperature (5 to 35°C) Humidity Ordinary Humidity (25 to 85% RH) 2.2. Measurement method 2.2.1. Antenna VSWR ANTENNA SPECIFICATION Shenzhen Feimin Technology Co.,Ltd 6 2.2.2. Antenna Return loss 2.3. Antenna passive test data 2.3.1. Test system Shenzhen Feimin Technology Co., Ltd. (24-probe OTA microwave darkroom) ANTENNA SPECIFICATION Shenzhen Feimin Technology Co.,Ltd 7 2.3.2.Antenna efficiency and gain Frequency (MHz) Gain (dBi) Efficiency (%) 2400 MHz 3.08 58.84 2410 MHz 3.32 62.85 2420 MHz 3.75 58.54 2430 MHz 3.84 61.75 2440 MHz 3.66 59.11 2450 MHz 3.19 63.09 2460 MHz 3.26 58.13 2470 MHz 3.12 56.12 2480 MHz 2.61 58.87 2490 MHz 2.8 62.62 2500 MHz 2.68 61.55 2.3.2. Antenna Radiation Pattern XOY-plane@2440MHz YOZ-plane@2440MHz XOZ-plane@2440MHz 3D-plane @2440MHz ANTENNA SPECIFICATION Shenzhen Feimin Technology Co.,Ltd 8 3.Notes 1. When installing, be careful not to be too close to the metal part to avoid affecting the antenna performance. 2. This antenna is only suitable for this model, and the position of the antenna cannot be changed at will. If it is used on other machines, the effect will become worse, which has nothing to do with our company. 3. The data (such as antenna efficiency, gain, etc.) used in this acknowledgement are all obtained from the laboratory test of this recognition project/antenna in Shenzhen Feimin Technology Co., Ltd. 4.Product packaging specification Product name: 2.4G glue stick antenna form: glue stick +SMA hea 1、Labeling requirements The inner label is 7CM long and 4CM wide The outer label is 7CM long, about 5CM 2、Packing process Job description： 1. The product __PCS is packed in PE open pockets, and the inner label is affixed to each pouch; Put the __ small bag into the big PE sealing tape bag, except the tail number and spare parts. 2. Each box contains __ large bags of products, and the boxes are sealed with adhesive tape in the shape of "I"。 3. Paste the outer label on the upper right corner of the box, and there must be no missing or wrong filling. 3、Precautions When packing the box, please pay attention to lay the antenna flat and avoid serious shaking after sealing. If the whole box is not filled, it needs to be filled with foam to avoid transportation Circumstances that caused product defects in the process。 client's name supplier Shenzhen Feimin Technology Co., Ltd. Order number ************* Material coding ************* Specification model ****** product name ******* quantity *****PCS QC: spare parts ***PCS Notes supplier Shenzhen Feimin Technology Co., Ltd. product name ************* Material coding ************* Specifications ********** quantity ***PCS product

Report No.: NTC2306226V00 Dongguan Nore Testing Center Co., Ltd. Address: Building D, Gaosheng Science and Technology park, Hongtu road, Nancheng district, Dongguan city, Guangdong province, China Web: www.ntc-c.com Tel:+86-769-2202 2444 Fax:+86-769-2202 2799 Page 1 of 36 FCC RADIO TEST REPORT Applicant......................... : Beijing BOE Sales Co.,LTD Address........................... : No.12 Xihuanzhong RD, BDA, Beijing, 100176, P.R.China Manufacturer.................... : Beijing BOE Sales Co.,LTD Address........................... : No.12 Xihuanzhong RD, BDA, Beijing, 100176, P.R.China Factory........................... : Kontech Electronics Co.,Ltd Address.......................... : 2nd Floor No.2 building ,Detai Technology Industrial Park ,Huarong Road , Longhua district, Shenzhen China 518109 Product Name................... : WiFi Bluetooth Module Brand Name..................... : N/A Model No. ....................... : MT9632 FCC ID................................ : 2AWH3SRXXAA Measurement Standard....... : 47 CFR FCC Part 15, Subpart C (Section 15.247) Receipt Date of Samples.... : June 15, 2023 Date of Tested.................. : June 15, 2023 to July 07, 2023 Date of Report.................. : July 20, 2023 This report shows that above equipment is technically compliant with the requirements of the standards above. All test results in this report apply only to the tested sample(s). Without prior written approval of Dongguan Nore Testing Center Co., Ltd, this report shall not be reproduced except in full. Prepared by Rose Hu / Project Engineer Approved by Iori Fan / Authorized Signatory Report No.: NTC2306266FV00 Page 2 of 36 Table of Contents 1. Summary of Test Result ...................................................................................................................................... 4 2. General Description of EUT ................................................................................................................................ 5 3. Test Channels and Modes Detail ........................................................................................................................ 8 4. Configuration of EUT ........................................................................................................................................... 8 5. Modification of EUT ............................................................................................................................................. 8 6. Description of Support Device ............................................................................................................................. 9 7. Test Facility and Location ................................................................................................................................. 10 8. Applicable Standards and References .............................................................................................................. 11 9. Deviations and Abnormalities from Standard Conditions ................................................................................. 11 10. Test Conditions ............................................................................................................................................... 12 11. Measurement Uncertainty ............................................................................................................................... 13 12. Sample Calculations ....................................................................................................................................... 14 13. Test Items and Results ................................................................................................................................... 15 13.1 Conducted Emissions Measurement ............................................................................................................ 15 13.2 Maximum Conducted Output Power Measurement ...................................................................................... 19 13.3 6dB Bandwidth Measurement ....................................................................................................................... 21 13.4 Power Spectral Density Measurement ......................................................................................................... 23 13.5 Band Edge and Conducted Spurious Emissions Measurement ................................................................... 24 13.6 Radiated Spurious Emissions and Restricted Bands Measurement ............................................................ 28 13.7 Antenna Requirement ................................................................................................................................... 35 14. Test Equipment List......................................................................................................................................... 36 Report No.: NTC2306266FV00 Page 3 of 36 Revision History Report Number Description Issued Date NTC2306266FV00 Initial Issue 2023-07-20 Report No.: NTC2306266FV00 Page 4 of 36 1. Summary of Test Result FCC Rules Description of Test Result Remarks §15.207 (a) AC Power Conducted Emission PASS --- §15.247(b)(3) Maximum Conducted Output Power PASS --- §15.247(a)(2) 6dB Bandwidth PASS --- §15.247(e) Power Spectral Density PASS --- §15.247(d) Band Edge and Conducted Spurious Emissions PASS --- §15.247(d), §15.209, §15.205 Radiated Spurious Emissions and Restricted Bands PASS --- §15.203 Antenna Requirement PASS --- Report No.: NTC2306266FV00 Page 5 of 36 2. General Description of EUT Product Information Product Name: WiFi Bluetooth Module Main Model Name: MT9632 Additional Model Name: N/A Model Difference: N/A S/N: 2304-2121 Brand Name: N/A Hardware Version: V1.0 Software Version: V1.0 Rating: DC 5V Classification: Class B Typical Arrangement: Tabletop / Built-in I/O Port: Refer to the user manual Accessories Information Adapter: N/A Cable: N/A O…

Text truncated - open the document above for the full version.

Report No.: NTC2306212FV00 Dongguan Nore Testing Center Co., Ltd. Address: Building D, Gaosheng Science and Technology park, Hongtu road, Nancheng district, Dongguan city, Guangdong province, China Web: www.ntc-c.com Tel:+86-769-2202 2444 Fax:+86-769-2202 2799 Page 1 of 43 FCC RADIO TEST REPORT Applicant......................... : Beijing BOE Sales Co.,LTD Address........................... : No.12 Xihuanzhong RD, BDA, Beijing, 100176, P.R.China Manufacturer.................... : Beijing BOE Sales Co.,LTD Address........................... : No.12 Xihuanzhong RD, BDA, Beijing, 100176, P.R.China Factory............................. : Kontech Electronics Co.,Ltd Address............................ : 2nd Floor No.2 building ,Detai Technology Industrial Park ,Huarong Road , Longhua district, Shenzhen China 518109 Product Name................... : WiFi Bluetooth Module Brand Name..................... : N/A Model No. ....................... : MT9632 FCC ID............................. : 2AWH3SRXXAA Measurement Standard....... : 47 CFR FCC Part 15, Subpart C (Section 15.247) Receipt Date of Samples.... : June 15, 2023 Date of Tested.................. : June 15, 2023 to July 07, 2023 Date of Report.................. : July 20, 2023 This report shows that above equipment is technically compliant with the requirements of the standards above. All test results in this report apply only to the tested sample(s). Without prior written approval of Dongguan Nore Testing Center Co., Ltd, this report shall not be reproduced except in full. Prepared by Rose Hu / Project Engineer Approved by Iori Fan / Authorized Signatory Report No.: NTC2306212FV00 Page 2 of 43 Table of Contents 1. Summary of Test Result ...................................................................................................................................... 4 2. General Description of EUT ................................................................................................................................ 5 3. Test Channels and Modes Detail ......................................................................…

Text truncated - open the document above for the full version.