2AWIZHL4GQVGPON ONT

Quick Installation Guide GPON ONT HALNY HL-4GQV HALNy HL-4GQV Quick Installation Guide 2 Safety Guidance 1.1 Safety Check Before installing the device, you must check the following items. 1.1.1 Electric Safety l Ensure that there are no inflammable, conductive or moist objects around. Check whether the cables are aged and whether other electrical appliances are placed stably, l Check whether the alternating or direct input current is within the allowed range of the device, whether the polarity of the direct current is correct, and whether the earth line is properly connected. 1.1.2 Device Position l Because the running electric device easily generates heat, please ensure to place the device in a well-ventilated environment, l Avoid direct sunshine, and do not place the device on a PC case, l Keep the device away from heat and water, l Check whether power supply is available. The input voltage fluctuation range must be smaller than 10%. The power plug should not share one socket with a hair drier, an iron or a refrigerator. 1.2 Safety Caution l Read the quick installation guide carefully before using the device, l Note all Cautions in the quick installation guide, l Do not use any accessory that does not belong to the device without prior consent of the manufacture, as it may cause fire or product damage, l Use the power adapter accompanied in the package, l Do not place any object on the device, l Keep the device dry, ventilated, rainproof, and clean, l During lightning weather, unplug the power plug and all connection cables, to protect the device against lightning, l Clean the device using a soft and dry cloth rather than liquid or atomizers. Power off the device before cleansing it, HALNy HL-4GQV Quick Installation Guide 3 l Power off the idle device, l Keep the ventilation hole clean and prevent any object from dropping into the device through it. Otherwise, it may cause short circuit and further cause device damage or fire. Do not spray liquid on the surface of the device, l Do not open the case of the device, especially during device power-on, l Before plugging or unplugging the power, ensure that the power is off, thus avoiding surge, l Be careful when unplugging the power, as the transformer may be very hot, l Cover the optical interface with fiber interface cap when it is not in use. Avoid direct eye exposure to the laser emitted from the optical interface. Wear safety glasses if possible, to protect your eyes. Caution: Please read the above safety guidance carefully before device use. Users should assume responsibilities for any accidents due to incompliance with the above instructions. 2 Overview This chapter mainly describes functions and the structure of the HALNy HL-4GQV. 2.1 Features and Function l Fast rate. Support up to 1.25Gbps uplink and 2.5Gbps downlink data transmission rates, l Strong maintainability. Provide various statuses of LED indicators, to help troubleshooting, l Long transmission distance, up to 20 km. HALNy HL-4GQV Quick Installation Guide 4 2.2 Front, rear and side Panel The description of the front, rear and side panel of the GPON ONU as follows. 2.2.1 Front Panel Fig. 1 - Front Panel LED Color Status Description PWR Green On The power works normally. Off Powered off or the power supply is abnormal. PON Green Refer to Table 2: “PON LED Status Instruction” LOS Red Refer to Table 2: “PON LED Status Instruction” WAN Green On Got WAN IP Address Successfully Blink Data is being transmitted Off Device in bridged mode or no IP LAN1-4 Green On The connection of Ethernet interface is normal. Blink Data is being transmitted through the Ethernet interface. Off The connection of the Ethernet interface fails to establish. 2.4G Green On The connection of Ethernet interface is normal. Blink Data is being transmitted through the Ethernet interface. Off The connection of the Ethernet interface fails to establish. 5G Green On The connection of Ethernet interface is normal. Blink Data is being transmitted through the Ethernet interface. Off The connection of the Ethernet interface fails to establish. TEL1-2 Green On Voip account is registered Blink Phone call Off Port deactivated or Voip account is unregistered WPS Green On Pairing ok Blink In pairing Off Not activated/not triggered Table 1. ONU LED Indication Table HALNy HL-4GQV Quick Installation Guide 5 Table 2.PON LED Status Instruction 2.2.2 Rear Panel 2.2.2.1. Fig 2. Rear Panel ONU Rear Panel Description： Interface / Button Function LAN1-4 Ethernet interface, for connecting to a computer or an Ethernet interface of a switch. Power Connect power cable PON LED Status Instruction PON LOS Description Off Off The ONT is disabled by the OLT Flash Off The ONT is registering to the OLT On Off The ONT has already registered to OLT Off Flash The fiber is not connected properly HALNy HL-4GQV Quick Installation Guide 6 Interface / Button Function ON/OFF Turn on/off the power supply. TEL1-2 RJ-11 Telephone Port Table 3.Rear Panel port description HALNy HL-4GQV Quick Installation Guide 7 2.2.3 Side Panel Fig 3 Side Panel ONT Bottom Panel Description： Button Function WLAN Press and hold for 5 seconds to disable/enable Wi-Fi WPS Press and hold for 5 seconds to activate WPS pairing RST Press and hold for 5 seconds to Reset configuration to the factory default settings. 3 ONU Installation The chapter describes the required installation operations before you use the device for the first time. 3.1 Product Networking Application - FTTH Fiber to the Home (FTTH) means to install the ONU to residences or enterprise buildings. The optical line terminal (OLT) is placed in the central equipment room. The ONU can be placed in the home of a user, or it can provide connection for the user through the Ethernet interface, according to the user requirement. The OLT connects to the ONU with an optical distributor in the point-to-multipoint way. See the following figure. FTTH HALNy HL-4GQV Quick Installation Guide 8 & Note ： The ONU applies to instal…

Text truncated - open the document above for the full version.

FIBRAIN sp.zo.o. Authority to Act as Agent [September 2, 2020] Federal Communications Commission 445 12 th Street SW Washington, DC 20554 Subject: Limited Agency Agreement (FIBRAIN sp.zo.o.) FCC ID: 2AWIZHL4GQV To Whom It May Concern: Shenzhen UnionTrust Quality and Technology Co., Ltd. is authorized to act on our behalf, until otherwise notified, for applications to Intertek Testing Services. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 36 months By: Radoslaw Ziemba (Signature 1 ) (Print name) Title: Head of Active Equipment Department On behalf of: FIBRAIN sp.zo.o. Telephone: +48 177 736 420 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

1(1) [FIBRAIN sp.zo.o.] [September 2, 2020] Attention: Application Examiner RE: Request for Confidentiality Applicant: [FIBRAIN sp.zo.o.] FCC ID: [2AWIZHL4GQV] To Whom It May Concern: Permanent Confidentiality [Complete this section if permanent confidentiality is requested] Request is hereby submitted by [FIBRAIN sp.zo.o.] to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: •Schematics •Detailed Block Diagrams •Detailed Operational/Functional Description Rationale for request for confidentiality: [FIBRAIN sp.zo.o.] has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.] [Short term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development.] If you have questions or need further information, please contact the undersigned. Sincerely, [Radoslaw Ziemba] [Head of Active Equipment Department] [FIBRAIN sp.zo.o.]

Page 1 of 5 FCC ID: 2AWIZHL4GQV Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT EXTERNAL PHOTOS EUT Photo EUT Photo Page 2 of 5 FCC ID: 2AWIZHL4GQV Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 3 of 5 FCC ID: 2AWIZHL4GQV Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 4 of 5 FCC ID: 2AWIZHL4GQV Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 5 of 5 FCC ID: 2AWIZHL4GQV Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo

Page 1 of 3 FCC ID: 2AWIZHL4GQV Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-2823088 6 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT INTERNAL PHOTOS EUT Photo EUT Photo 5G ANT. 1 2.4G A N T. 1 5G ANT. 2 2.4G ANT. 0 5G ANT. 3 5G ANT. 0 Page 2 of 3 FCC ID: 2AWIZHL4GQV Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-2823088 6 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 3 of 3 FCC ID: 2AWIZHL4GQV Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-2823088 6 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo

Page 2 of 14 Report No.:200704006RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-2823088 6 E-mail: [email protected] http://www.uttlab.com UTTR-RF-FCCPART1-V1.0 Version Version No. Date Description V1.0 October 15, 2020 Original Page 3 of 14 Report No.:200704006RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-2823088 6 E-mail: [email protected] http://www.uttlab.com UTTR-RF-FCCPART1-V1.0 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD ................................................................................. 5 1.4 OTHER INFORMATION ......................................................................................................................................... 7 1.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................................................... 8 1.6 TEST LOCATION ................................................................................................................................................. 8 1.7 TEST FACILITY ................................................................................................................................................... 8 1.8 DEVIATION FROM STANDARDS ............................................................................................................................ 8 1.9 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 9 1.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 9 2. EQUIPMENT LIST .................................................................................................................................................... 9 3. MPE EVALUATION ................................................................................................................................................. 10 3.1 REFERENCE DOCUMENTS FOR EVAL U AT I O N ...................................................................................................... 10 3.2 MPE COMPLIANCE REQUIREMENT ................................................................................................................... 10 3.2.1 LIMITS ................................................................................................................................................. 10 3.2.2 TEST PROCEDURE ............................................................................................................................... 10 3.3 MPE CALCULATION METHOD ........................................................................................................................... 10 3.4 MPE CALCULATION RESULTS .......................................................................................................................... 10 3.4.1 FOR WLAN ......................................................................................................................................... 11 3.4.2 SIMULTANEOUS MULTI-BAND TRANSMISSION MPE ANALYSIS .................................................................. 13 APPENDIX 1 PHOTOS OF TEST SETUP ..................................................................................................................... 14 APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS ................................................................................. 14 Page 4 of 14 Report No.:200704006RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-2823088 6 E-mail: [email protected] http://www.uttlab.com UTTR-RF-FCCPART1-V1.0 1. GENERAL INFORMATION 1.1 CLIENT INFORMATION Applicant: FIBRAIN sp.zo.o. Address of Applicant: Poland, Zaczernie 190F, 36-062 Manufacturer: FIBRAIN sp.zo.o. Address of Manufacturer: Poland, Zaczernie 190F, 36-062 1.2 EUT INFORMATION Product Name: GPON ONT Model No.: HL-4GQV Trade Mark: HALNy DUT Stage: Identical Prototype EUT Supports Function: 2.4 GHz ISM Band: IEEE 802.11b/g/n 5 GHz U-NII Bands: 5 150 MHz to 5 250 MHz IEEE 802.11a/n/ac 5 250 MHz to 5 350 MHz IEEE 802.11a/n/ac 5 470 MHz to 5 725 MHz IEEE 802.11a/n/ac 5 725 MHz to 5 850 MHz IEEE 802.11a/n/ac Sample Received Date: July 4, 2020 Sample Tested Date: July 4, 2020 to August 19, 2020 Page 5 of 14 Report No.:200704006RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-2823088 6 E-mail: [email protected] http://www.uttlab.com UTTR-RF-FCCPART1-V1.0 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD For 2.4 GHz ISM Band of Wi-Fi Frequency Band: 2400 MHz to 2483.5 MHz Frequency Range: 2412 MHz to 2462 MHz Support Standards: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n-HT20, IEEE 802.11n-HT40 Type of Modulation: IEEE 802.11b: DSSS(CCK, DQPSK, DBPSK) IEEE 802.11g: OFDM(64-QAM, 16-QAM, QPSK, BPSK) IEEE 802.11n-HT20: OFDM(64-QAM, 16-QAM, QPS…

Text truncated - open the document above for the full version.

Uni�nT『ust Page 1 of 72 Report No.: 200704006RFC-1 FCC TEST REPORT Product Name: GPON ONT Trade Mark: HALNy Model No.: HL-4GQV Report Number: 200704006RFC-1 Test Standards: FCC 47 CFR Part 15 Subpart C FCC ID: 2AWIZHL4GQV Test Result: PASS Date of Issue: October 15, 2020 Prepared for. FIBRAIN sp.zo.o. Poland, Zaczernie 190F, 36-062 P「epa「ed by: Shenzhen UnionTrust Quality and Technology Co., Ltd. 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China TEL: +86-755-2823 0888 FAX: +86-755-2823 0886 Prepared by: v A ppro ved by: Technical Director Shenzhen UnionTrust Quality and Technology Co., Ltd. Reviewed by. Date: As三 October 15, 2020 Address: 16/F, Block A, Building 6, Baoneng Science and Technology Pa「k,Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] _!::!!!Q://www.uttlab.com UTTR-RF-FCCPART15.247-V1.0 Page 2 of 72 Report No.: 200704006RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-RF-FCCPART15.247-V1.0 Version Version No. Date Description V1.0 October 15, 2020 Original Page 3 of 72 Report No.: 200704006RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-RF-FCCPART15.247-V1.0 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.2.1 GENERAL DESCRIPTION OF EUT ............................................................................................................ 4 1.2.2 DESCRIPTION OF ACCESSORIES .............................................................................................................. 4 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD ................................................................................. 5 1.4 OTHER INFORMATION ......................................................................................................................................... 5 1.5 DESCRIPTION OF SUPPORT UNITS ...................................................................................................................... 6 1.6 TEST LOCATION ................................................................................................................................................. 6 1.7 TEST FACILITY ................................................................................................................................................... 6 1.8 DEVIATION FROM STANDARDS ............................................................................................................................ 7 1.9 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 7 1.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 7 1.11 MEASUREMENT UNCERTAINTY ........................................................................................................................... 7 2. TEST SUMMARY ...................................................................................................................................................... 8 3. EQUIPMENT LIST .................................................................................................................................................... 9 4. TEST CONFIGURATION ........................................................................................................................................ 10 4.1 ENVIRONMENTAL CONDITIONS FOR TESTING ...................................................................................................... 10 4.1.1 NORMAL OR EXTREME TEST CONDITIONS ............................................................................................. 10 4.1.2 RECORD OF NORMAL ENVIRONMENT..................................................................................................... 10 4.2 TEST CHANNELS ............................................................................................................................................. 10 4.3 EUT TEST STATUS .......................................................................................................................................... 11 4.4 PRE-SCAN ....................................................................................................................................................... 11 4.5 TEST SETUP .................................................................................................................................................... 12 4.5.1 FOR RADIATED EMISSIONS TEST SETUP ................................................................................................ 12 4.5.2 FOR CONDUCTED EMISSIONS TEST SETUP ............................................................................................ 13 4.5.3 FOR CONDUCTED RF TEST SETUP ........................................................................................................ 14 4.6 SYSTEM TEST CONFIGURATION .....................................................................................…

Text truncated - open the document above for the full version.

Page 29 of 72 Report No.: 200704006RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-RF-FCCPART15.247-V1.0 IEEE 802.11n-HT40 MIMO_ Chain 0 MIMO_ Chain 1 Channel 3 Channel 6 Channel 9 Page 30 of 72 Report No.: 200704006RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-RF-FCCPART15.247-V1.0 5.6 CONDUCTED OUT OF BAND EMISSION Test Requirement: FCC 47 CFR Part 15 Subpart C Section 15.247(d) Test Method: ANSI C63.10-2013 Clause 11.11 Limit: In any 100kHz bandwidth outside the frequency bands in which the spread spectrum intentional radiator in operating, the radio frequency power that is produced by the intentional radiator shall be at least 20dB below that in the 100kHz bandwidth within the band that contains the highest level of the desired power. Test Procedure: Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the spectrum analyzer. Use the following spectrum analyzer settings: Step 1:Measurement Procedure REF a) Set instrument center frequency to DTS channel center frequency. b) Set the span to ≥ 1.5 times the DTS bandwidth. c) Set the RBW = 100 kHz. d) Set the VBW ≥ 3 x RBW. e) Detector = peak. f) Sweep time = auto couple. g) Trace mode = max hold. h) Allow trace to fully stabilize. i) Use the peak marker function to determine the maximum PSD level. j) Note that the channel found to contain the maximum PSD level can be used to establish the reference level. Step 2:Measurement Procedure OOBE a) Set RBW = 100 kHz. b) Set VBW ≥ 300 kHz. c) Detector = peak. d) Sweep = auto couple. e) Trace Mode = max hold. f) Allow trace to fully stabilize. g) Use the peak marker function to determine the maximum amplitude level. Note: The cable loss and attenuator loss were offset into measure device as an amplitude offset. Test Setup: Refer to section 4.5.3 for details. Instruments Used: Refer to section 3 for details Test Results: Pass Page 31 of 72 Report No.: 200704006RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-RF-FCCPART15.247-V1.0 The test plots as follows: SISO_ Chain 0_ IEEE 802.11b In-Band Reference Level Out of Band Emission Lowest Channel Middle Channel Page 32 of 72 Report No.: 200704006RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-RF-FCCPART15.247-V1.0 Highest Channel Page 33 of 72 Report No.: 200704006RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-RF-FCCPART15.247-V1.0 SISO_ Chain 0_ IEEE 802.11g In-Band Reference Level Out of Band Emission Lowest Channel Middle Channel Page 34 of 72 Report No.: 200704006RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-RF-FCCPART15.247-V1.0 Highest Channel Page 35 of 72 Report No.: 200704006RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-RF-FCCPART15.247-V1.0 SISO_ Chain 0_ IEEE 802.11n-HT20 In-Band Reference Level Out of Band Emission Lowest Channel Middle Channel Page 36 of 72 Report No.: 200704006RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-RF-FCCPART15.247-V1.0 Highest Channel Page 37 of 72 Report No.: 200704006RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-RF-FCCPART15.247-V1.0 SISO_ Chain 0_ IEEE 802.11n-HT40 In-Band Reference Level Out of Band Emission Lowest Channel Middle Channel Page 38 of 72 Report No.: 200704006RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-RF-FCCPART15.247-V1.0 Highest Channel Page 39 of 72 Report No.: 200704006RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-RF-FCCPART15.247-V1.0 SISO_ Chain 1_ IEEE 802.11b In-Ba…

Text truncated - open the document above for the full version.

Page 44 of 72 Report No.: 200704006RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-RF-FCCPART15.247-V1.0 Highest Channel Page 45 of 72 R…

Text truncated - open the document above for the full version.