2AWMC-M11A1SMART MIRROR

User Manual www.refliko.com 1 Parts List (Kendall for parts list, Veronica for any graphics) 3 Installation of stand to device (Veronica) 4 Turning on device (Will, take a photo of EVT and paste here) 5 Setting up Wifi 6 Option 1 6 Option 2 10 Setting up the Rotation Manager 13 Setting up the Floating Keyboard 16 Option 1 16 Option 2 21 Android 7.1 Nougat 27 FCC 28 Federal Communications Commission (FCC) Statement 28 FCC RF Radiation exposure statement: 28 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 28 Important Safety Instructions 29 Danger - To reduce the risk of electric shock: 29 Warning - To reduce the risk of burns, fire, electric shock, or injury to persons: 29 Warnings 30 Cleaning REFLIKO MARA 30 2 Parts List (Kendall for parts list, Veronica for any graphics) 3 Installation of stand to device (Veronica) Can include link to video 4 Please watch the installation video on the desktop after the product is turned on, there is a detailed installation bracket process in the video Turning on device (Will, take a photo of EVT and paste here) 5 Setting up Wifi Option 1 1.Swipe down from top of screen 2.Click and hold on WiFi Icon until WiFi Settings screen appears 3.Select your WiFi Network 6 4.Type Your WiFi Network Password 7 8 Option 2 1.Swipe down from top of screen 2.Click and hold on WiFi Icon until WiFi Settings appears 3.Find Your WiFi Network 4.Select Your WiFi Network 9 5.If prompted, enter your WiFi password 6.After entering password, click Connect 10 11 Setting up the Rotation Manager 1.Open Rotation Manager App 2.Swipe Left to Continue 12 3.Click on the icon until you see “Forced Portrait” 4.Swipe Left 13 5.Click on the highlighted icon until “Permanent Notification Off” is seen 6.Click on the highlighted icon until “Rotation Manager Running” is seen 7.Click the highlighted check mark to finish 14 Setting up the Floating Keyboard Option 1 1.Swipe down from top of screen 2.Click on Settings Icon 3.Click on Search Icon 4.Click on the ellipsis 15 5.Click on Floating 16 6.Success 17 18 Option 2 1.Swipe down from top of screen 2.Click on the Settings Icon 3.Click on Languages & Input 4.Click on Virtual Keyboard 5.Click on Manage Keyboards 19 6.Enable Gboard 7.Click OK to allow Gboard to be used 8.Swipe from Left of Screen 20 9.Click on Settings Home 10.Click on the Search Icon 11.Select the keyboard option 12.Enable GBoard 21 13.Click on the ellipsis 14.Click on Floating 15.Keyboard should now be floating 22 23 Android 7.1 Nougat REFLIKO MARA runs on “Pure and Stock” Android 7.1 Nougat. This means you get the ideal experience as the operating system was originally designed and intended. There are a number of available tutorials on how to use Android that can be found online be searching keywords “Android 7 tutorial” Here are some of our suggested tutorials: Written: https://www.androidauthority.com/android-7-0-features-673002/ Video: https://www.youtube.com/watch?v=6JKve8YLwu4 For iOS users: https://www.youtube.com/watch?v=Fg05ZPfyEyA 24 FCC Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1.Reorient or relocate the receiving antenna. 2.Increase the separation between the equipment and receiver. 3.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4.Consult the dealer or an experienced radio/tv technician for help. FCC RF Radiation exposure statement: 1.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter 2.This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1.This device may not cause harmful interference and 2.This device must accept any interference received, including interference that may cause undesired operation. Working temperature: 32F to 104F (0C to 40C) Working Voltage: 110V to 240V USB port is only used for peripherals or ADB access. 25 Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Important Safety Instructions When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using the REFLIKO MARA. Danger - To reduce the risk of electric shock: Always unplug this appliance from the electrical outlet immediately after using and before cleaning. Warning - To reduce the risk of burns, fire, electric shock, or injury to persons: 1.An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts. 2.Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock or injury to persons. 3.This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning us…

Text truncated - open the document above for the full version.

SCS-F18:ProjectandProductCertificationRepresentativeAuthorizationLetterPage1of2Rev6.0 775MontagueExpressway Milpitas,CA95035 Tel:408-526-1188 Fax:408-526-1088 Email: [email protected] ProjectandProduct Certification Representative AuthorizationLetter ReasonforAmendment(current/obsolete) RevisionHistory ApprovedDate FromTo InitialRelease(obsolete)1.01.0Nov-14-2006 Revisedwording(obsolete)1.02.0Sept–25-2007 Updatedcompanytemplate(obsolete)2.03.0Jan-31-2012 Updatedletterinformation(obsolete)3.04.0May-23-2014 AddedFCCIDfield(obsolete)4.05.0Sep-16-2014 Updatedcompanyname&logo(current)5.06.0Jun-27-2018 SCS-F18:ProjectandProductCertificationRepresentativeAuthorizationLetterPage2of2Rev6.0 ReflikoInc. (2020-06-11) To:BVCPS,INC. 775MontagueExpressway, Milpitas,CA95035 USA DearSir/Madam, Re:ProductCertificationRepresentativeAuthorizationLetter We,_____ReflikoInc. ___herebyauthorizeBVCPS,Inc.toactasaCertificationBodyforcertifyingfor thefollowingproject(s): Product::SMARTMIRROR M/N:MN73AH1A002AA,MN73AH1A022AA,MN73AH1A032AA ,MN73AH1A042AA,MN73AH1A052AA,MN73AH1A062AA,MN73AH1A072AA, MN73AH1A082AA FCCID:2AWMC-M11A1 Sincerely, KendallChow ReflikoInc. 793AmesAve.Milpitas,CA95035,USA

SCS-F19:ConfidentialityRequestLetterPage 1 of 2 Rev6.0 775MontagueExpressway Milpitas,CA95035 Tel:408-526-1188 Fax:408-526-1088 Email: [email protected] m Confidentiality RequestLetter ReasonforAmendment(current/obsolete) RevisionHistory ApprovedDate FromTo InitialRelease(obsolete)1.01.0Nov-14-2006 AddingCFR2.459(obsolete)1.02.0August–11-2008 Updatedcompanytemplate&Addedtext box(obsolete) 2.03.0Jan-31-2012 AddedICconfidentialityletterform (obsolete) 3.04.0March-26-2015 CorrectionstoSTCform.Addedreference toKDB(obsolete) 4.05.0Nov-19-2015 Updatedcompanylogo(current)5.06.0Jun-26-2019 SCS-F19:ConfidentialityRequestLetterPage 2 of 2 Rev6.0 ReflikoInc. (2020-06-11) To: FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD Subject:PermanentConfidentialityRequestforFCCID:2AWMC-M11A1 Pursuanttosections0.457and0.459ofCFR47,werespectfullyrequestpermanent confidentialtreatmentofthefollowingExhibitsaccompanyingthisapplicationas: -BlockDiagram -Schematics -OperationalDescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarily releasedtothepublic.Thepublicdisclosureofthesematerialsmaybeharmfultothe applicantandprovideunjustifiedbenefitstoitscompetitors. Theapplicantunderstandsthatdisclosureofthisapplicationandallaccompanying documentationwillnotbemadebeforethedateoftheGrantforthisapplication. Sincerely, KendallChow ReflikoInc. 793AmesAve.Milpitas,CA95035,USA

SCS-F190WiFiChannel12&13DeclarationLetterPage 1 of2Rev.2.0 CreatedbyWilliamGraffApprovedbyBao-ThuongNguyen WIFIChannel12and13 DeclarationLetter ReasonforAmendment RevisionHistory ApprovedDate FromTo InitialRelease(obsolete)Initial1.0December22,2015 Modifytheselectoptions(current)1.02.0September23,2016 SCS-F190WiFiChannel12&13DeclarationLetterPage 2 of2Rev.2.0 CreatedbyWilliamGraffApprovedbyBao-ThuongNguyen ReflikoInc. WIFIChannel12and13DeclarationLetter WedeclaretheequipmentidentifiedbelowwithregardstoChannel12and13capabilitiesfor FCCID:2AWMC-M11A1 Declaration ProducthardwaredoesnothavethecapabilitytooperateonChannel 12and13.  ProducthardwarehasthecapabilitytooperateonChannel12and13. However,thesetwochannelswillbedisabledviasoftwareandwillnot beaccessibletouser. ProducthardwarehasthecapabilitytooperateonChannel12and13. However,alltheoperatedchannelscan’tbechangedintheRF parameterviasoftware.Allchannelshavecompliedwithallofthe requirementssetsoutinFCCPart15.247. ProducthardwarehasthecapabilitytooperateonWiFiChannel12 and13,andmeetstherequirementsofKDB594280D01v02r01. Pleasenote: 1.)Bydefault,thisdeviceoperatesinamodethatiscompliantwith theU.S.requirements. 2.)Thisdevicewillalsousesupplementalinformationsuchasgeo- locationdatatodeterminethatitisoperatingoutsidetheU.S.,if necessary,tochangeitspower.Suchsupplementaldatawillbe derivedfromthefollowing: GlobalNavigationSatelliteSystem(GNSS)7sensorsinthedevice MobileCountryCode(MCC),8orMCCwithaMobileNetworkcode (MNC),receivedfromaCMRS9carrierandreceiveddirectlybya receiveronthedevice Countryinformationderivedfrommultipleadjacentaccesspoints(for exampleusingIEEEStd802.11dprovisions)maybepermittedon case-by-casebasis Othersuitablegeo-locationdatabasedonIPaddressesorother reliablesource. SCS-F190WiFiChannel12&13DeclarationLetterPage 3 of2Rev.2.0 CreatedbyWilliamGraffApprovedbyBao-ThuongNguyen Sincerely, KendallChow ReflikoInc. 793AmesAve.Milpitas,CA95035,USA

ReflikoInc. Declarationonmodeldifference Wetheundersignedherebyconfirmthatthesemodelsareidentical,andallmodelshavethe sameRFmoduleandantenna,PCBlayout,schematicsandcomponent.Onlythemodelnameare different. ProductionnameFCCID:Modelno. SMART MIRROR 2AWMC-M11A1MN73AH1A002AA,MN73AH1A022AA,MN73AH1A032AA, MN73AH1A042AA,MN73AH1A052AA,MN73AH1A062AA, MN73AH1A072AA,MN73AH1A082AA Sincerely, KendallChow ReflikoInc. 793AmesAve.Milpitas,CA95035,USA

ANTENNA

Label: 50mmX80mm Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothe followingtwoconditions:(1)thisdevicemaynotcauseharmfulinterference,and(2) thisdevicemustacceptanyinterferencereceived,includinginterferencethatmay causeundesiredoperation. SMARTMIRROR ModelNumber：MN73AH1A002AA VoltageRating：AC100-240V FrequencyRating：50/60Hz FCCID:2AWMC-M11A1 LabelLocation:

RFEXPOSUREEVALUATION AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeused toevaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF) Radiationasspecifiedin§1.1307(b) FCCID:2AWMC-M11A1 EUTSpecification EUTSMARTMIRROR Frequencyband (Operating) WLAN:2.412GHz~2.462GHz WLAN:5.18GHz~5.32GHz/5.50GHz~5.70GHz WLAN:5.745GHz~5825GHz Others DevicecategoryPortable(<20cmseparation) Mobile(>20cmseparation) Others___ ExposureclassificationOccupational/Controlledexposure(S=5mW/cm2) GeneralPopulation/Uncontrolledexposure (S=1mW/cm2) AntennadiversitySingleantenna Multipleantennas Txdiversity Rxdiversity Tx/Rxdiversity Max.outputpower802.11b:7.12dBm 802.11g:7.02dBm 802.11n(HT20):6.96dBm 802.11n(HT40):6.77dBm Antennagain(Max)2dBi EvaluationappliedMPEEvaluation SAREvaluation LimitsforMaximumPermissibleExposure(MPE) Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) Power Density(mW/cm 2 ) Average Time (A)LimitsforOccupational/ControlExposures 300-1500----F/3006 1500-100000----56 (B)LimitsforGeneralPopulation/UncontrolExposures 300-1500----F/15006 1500-100000----130 Friistransmissionformula:Pd=(Pout*G)\(4*pi*R2) Where Pd=PowerdensityinmW/cm 2 ,Pout=outputpowertoantennainMw G=gainofantennainlinearscale,Pi=3.1416 R=distancebetweenobservationpointandcenteroftheradiatorincm PdthelimitofMPE,1mW/cm2.Ifweknowthemaximumgainoftheantenna andtotalpowerinputtotheantenna,throughthecalculation,wewillknowthe distancewheretheMPElimitisreached. MeasurementResult Operation Mode Channel Number Channel Frequency (MHz) MeasurementLevel (dBm) Limit (dBm) Verdict Ant1 802.11b 124126.3230PASS 624375.7630PASS 1124627.1230PASS 802.11g 124125.6830PASS 624376.1230PASS 1124627.0230PASS 802.11n (HT20) 124125.7630PASS 624376.1530PASS 1124626.9630PASS 802.11n (HT40) 324225.8530PASS 624376.0230PASS 924526.7730PASS Antenna1 Signature: Print:AlanHe Title:Manager Date:2020-06-10

Report No.: EA2005265F 02001 1 of 59 DongGuan Anci Electronic Technology Co., Ltd 1-2 Floor, Building A, No.11, Headquarters 2 Road, Songshan Lake Hi-tech Industrial Development Zone, Dongguan City, Guangdong Pr., China. Phone: 86-769- 8507 5888; Fax: 86-769- 8507 5898 E-mail: [email protected] Rev. 1.0 ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF SMART MIRROR Model No.: MN73AH1A002AA, MN73AH1A022AA, MN73AH1A032AA, MN73AH1A042AA, MN73AH1A052AA, MN73AH1A062AA, MN73AH1A072AA, MN73AH1A082AA FCC ID: 2AWMC-M11A1 Trademark: N/A Report No.: EA2005265F 02001 Issue Date: May 30, 2020 Prepared for Refliko Inc. 793 Ames Ave. Milpitas, CA 95035, USA Prepared by Dong Guan Anci Electronic Technology Co., Ltd. 1-2 Floor, Building A, No.11, Headquarters 2 Road, Songshan, Lake Hi-tech Industrial Development Zone, Dongguan City, evelopment Zone, Dongguan City, Guangdong Pr., China. This report shall not be reproduced, except in full, without the written approval of Dong Guan Anci Eleaactronic Technology Co., Ltd. Report No.: EA2005265F 02001 2 of 59 TRF No.: FCC 15.247/A Rev. 1.0 VERIFICATION OF COMPLIANCE Applicant: Refliko Inc. 793 Ames Ave. Milpitas, CA 95035, USA Manufacturer: Refliko Inc. 793 Ames Ave. Milpitas, CA 95035, USA Product Description: SMART MIRROR Model Number: MN73AH1A002AA, MN73AH1A022AA, MN73AH1A032AA, MN73AH1A042AA, MN73AH1A052AA, MN73AH1A062AA, MN73AH1A072AA, MN73AH1A082AA(All models are identical except for different model names. We chose model :MN73AH1A002AA for all tests) We hereby certify that: The above equipment was tested by Dong Guan Anci Electronic Technology Co., Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10-2013 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247. Date of Test : May 15, 2020 to May 30, 2020 Prepared by : Tomas Yang/Supervisor Reviewer & Authorized Signer : Alan He/Manager Report No.: EA2005265F 02001 3 of 59 TRF No.: FCC 15.247/A Rev. 1.0 Modified Information Version Summary Revision Date Report No. Ver.1.0 Original Report / EA2005265F 02001 Report No.: EA2005265F 02001 4 of 59 TRF No.: FCC 15.247/A Rev. 1.0 Table of Contents 1. GENERAL INFORMATION ..................................................................................................................................... 6 1.1 PRODUCT DESCRIPTION ........................................................................................................................................ 6 1.2 TEST METHODOLOGY ............................................................................................................................................ 6 2. SYSTEM TEST CONFIGURATION ........................................................................................................................ 7 2.1 EUT CONFIGURATION ............................................................................................................................................ 7 2.2 EUT EXERCISE ...................................................................................................................................................... 7 2.3 TEST PROCEDURE ................................................................................................................................................. 7 2.4 CONFIGURATION OF TESTED SYSTEM ................................................................................................................... 7 3. DESCRIPTION OF TEST MODES ......................................................................................................................... 9 4. SUMMARY OF TEST RESULTS .......................................................................................................................... 10 5. TEST FACILITY ....................................................................................................................................................... 13 6. CONDUCTED EMISSIONS TEST ........................................................................................................................ 14 6.1 MEASUREMENT PROCEDURE .............................................................................................................................. 14 6.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ...................................................................................... 14 6.3 MEASUREMENT EQUIPMENT USED ...................................................................................................................... 14 6.4 CONDUCTED EMISSION LIMIT .............................................................................................................................. 14 6.5 MEASUREMENT RESULT ...................................................................................................................................... 14 7. RADIATED EMISSION TEST ................................................................................................................................ 17 7.1 MEASUREMENT PROCEDURE .............................................................................................................................. 17 7.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ...................................................................................... 18 7.3 MEASUREMENT EQUIPMENT USED ...................................................................................................................... 19 7.4 RADIATED EMISSION LIMIT ................................................................................................................................... 20 7.5 MEASUREMENT RESULT ........................................................................................................................…

Text truncated - open the document above for the full version.