2AWQY-HV2001Hypervolt 2

EN Operating Instructions BG Инструкции за експлоатация CS Návod k použití DA Betjeningsvejledning DE Bedienungsanleitung EL Οδηγίες λειτουργίας ES Instrucciones de uso ET Kasutusjuhised FI Käyttöohjeet FR Mode d’emploi HE הלעפה תוארוה HR Upute za rad HU Használati útmutató IT Istruzioni per l’uso KO 작동 지침 LT Naudojimo instrukcijos MS Arahan operasi NL Gebruiksaanwijzing PL Instrukcje użytkowania PT Instruções de operaçã PT-BR Instruções operacionais RO Instrucțiuni de utilizare RU Инструкции по эксплуатации SK Návod na použitie SL Navodila za uporabo SV Driftanvisningar TH คู่มือการใช้งาน ZH-TW 繁體中文 操作說明 TO REDUCE RISKS OF ELECTRIC SHOCK, FIRE, AND PERSONAL INJURY, OR PROPERTY DAMAGE, THIS DEVICE MUST BE USED IN ACCORDANCE WITH THE FOLLOWING WARNINGS, CAUTIONS, AND SAFETY INSTRUCTIONS. IMPORTANT SAFETY INSTRUCTIONS - ORIGINAL INSTRUCTIONS Read all instructions before using the Hypervolt 2. DANGER To reduce the risk of electric shock: • Always unplug this device from the electrical outlet immediately after using and before cleaning. • Do not reach for a device that has fallen into water. Unplug immediately. • Do not use while bathing or in a shower. • Do not place or store device where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid. WARNING To reduce the risk of burns, fire, electric shock, or injury to persons: • A device should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts. • Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons. • This device can be used by children aged from 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. • Children should be supervised to ensure that they do not play with the appliance. • Use this device only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer. • Never operate this device if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or if it has gotten wet. Return the device to a service center for examination and repair. • Do not carry this device by supply cord or use cord as a handle. • Keep the cord away from heated surfaces. • Never operate the device with the air openings blocked. Keep the air openings free of lint, hair, or any substance which may impair the flow of air. • Never drop or insert any object into any opening. • Do not use outdoors. • Do not operate where aerosol (spray) devices are being used or where oxygen is being administered. • Never operate on a soft surface such as a bed or couch where the air openings may be blocked. • Do not use device in close proximity to loose clothing or jewelry. • Keep long hair away from device while in use. • Cleaning and user maintenance shall not be done by children without supervision. • Do not remove screws or attempt to disassemble. • Do not operate continuously for more than one hour. After one hour use, allow device to rest for 30 minutes before re-using. • Unplug the device after charging and prior to use. EN • Use device only according to Operating Instructions. • When using the Hypervolt 2 use only on dry, clean surfaces of the body by lightly pressing and moving across the body for approximately sixty(60) seconds per region. The Hypervolt 2 should only be used on soft tissue areas of the body and should not be used on any hard or bony areas of the body, including the head. Please immediately stop use of the Hypervolt 2 upon experiencing any pain or discomfort, apart from light muscle soreness. Bruising can occur from use of the Hypervolt 2, regardless of the pressure setting, and if bruising does occur you should not use the Hypervolt 2 on the bruised area until the bruise is fully healed. Use of the Hypervolt 2 should also be avoided on all bruises, contusions, rashes or irritated or injured areas of the skin until they are fully healed. When using the Hypervolt 2 be sure to keep fingers, toes, hair, and other body parts away from the back of the attachment head to avoid pinching or hair entanglement. The Hypervolt 2 should only be charged with the double insulated, 18VDC Hyperice charger (model number MX24Z2-1801000) that was supplied with the device. Do not charge the Hypervolt 2 overnight or leave the Hypervolt 2 unattended when charging or in use. Please do not use the Hypervolt 2, or any percussion device without first obtaining approval from your physician if any of the following apply: • Pregnancy, diabetes with complications such as neuropathy or retinal damage, wear of pacemakers, recent surgery or injury, epilepsy or migraines, herniated disks, spondylolisthesis, spondylolysis, or spondylosis, recent joint replacements or IUD, metal pins or plates or any concerns about your physical health. Frail individuals and children should be accompanied by an adult when using any percussion or vibration device. These contraindications do not mean that you are not able to use a percussion or vibration device but we advise that before doing so you consult your physician. Ongoing research is being done on the effects of percussion massage for specific medical disorders that may result in the shortening of the list of contraindications as shown above. The Hypervolt 2 contains a battery which must be complied with safely at an appropriate e-waste disposal or recycling facility. This device contains batteries that are non-replaceable. CAUTION The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble, heat above 100º C or incinerate. Dispose of used battery promptly. Keep away from children. Do not disassemble and do not dispose of in fire. SAVE THESE INSTRUCT…

Text truncated - open the document above for the full version.

UNITED STATES DESIGNATED AGENT LETTER Date: March 24, 2023 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Company Name: Hyperice, Inc. Grantee Code: FRN: 0029700333 Contact Name: Contact Name: Steve Henderson Address: Hyperice, Inc. 2AWQY Steven Henderson 525 Technology Drive Address: 525 Technology Drive City/Province/Zip: Irvine, CA 92618 City/Province/Zip: Irvine, CA 92618 Telephone: 617.658.5857 Telephone: 617.658.5857 Fax: N/A Fax: N/A Email: [email protected] Email: [email protected] Applicable Equipment: FCC ID: 2AWQY-HV2001 ATTN: Director of Certification: We, Hyperice, Inc. understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, Hyperice, Inc. acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Steve Henderson Name (Printed): Steve Henderson Title: Director, Quality & Regulatory Systems Title: Director, Quality & Regulatory Systems Signature: Signature:

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Hyperice, Inc. Address 525 Technology Drive, Suite 100 Grantee Code 2AWQY FCC ID 2AWQY-HV2001 Authorized Contact Name Steve Henderson Contact Email [email protected], [email protected] Contact Phone 617.658.5857 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b)in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c)if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e)in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Hyperice, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Hyperice, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature:Date: Print Name: Steve Henderson Title: Director, Quality & Regulatory Systems *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database 03/24/2023

Date: March 24, 2023 TO:Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: 2AWQY-HV2001 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hyperice, Inc. This authorization is valid until further written notice from the applicant. Name (Printed): Steve HendersonTitle: Directory, Quality & Regulatory Systems Signature: On behalf of Company: Hyperice, Inc. Telephone: 617.658.5857

To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Hyperice, Inc. 525 Technology Drive Irvine, CA 92618 Regarding: Confidentiality Request regarding application for FCC ID: 2AWQY-HV2001 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Steve Henderson Director, Quality & Regulatory Systems Hyperice, Inc.

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 1 of 7 Internal Photos for SHCR2302000290HS SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 2 of 7 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 3 of 7 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 4 of 7 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 5 of 7 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 6 of 7 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 7 of 7

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230200029003 Page: 1 of 10 Parlam Zhan Laboratory Manager 1 Cover Page RF Exposure Evaluation Report Application No.: SHCR2302000290HS FCC ID: 2AWQY-HV2001 IC: 26929-HV2001 Applicant: Hyperice, Inc. Address of Applicant: 525 Technology Drive, Suite 100, Irvine, California, 92618 Manufacturer: Zhejiang Honghei Technology Co. LTD Address of Manufacturer: No.1 Juxian Road,Huzhen Town,Jinyun county,Zhejiang Province Factory: Zhejiang Honghei Technology Co. LTD Address of Factory: No.1 Juxian Road,Huzhen Town,Jinyun county,Zhejiang Province Equipment Under Test (EUT): EUT Name: Hypervolt 2 Model No.: HV2001 Trade Mark: HYPERICE Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 RSS-102 Issue 5 Amendment 1 (February 2, 2021) Date of Receipt: 2023-02-17 Date of Test: 2023-03-18 to 2023-03-23 Date of Issue: 2023-03-24 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230200029003 Page: 2 of 10 Revision Record Version Description Date Remark 00 Original 2023-03-24 / Authorized for issue by: Bill Wu/Project Engineer Parlam Zhan /Reviewer SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230200029003 Page: 3 of 10 2 Contents Page 1 COVER PAGE .............................................................................................................................. 1 2 CONTENTS .................................................................................................................................. 3 3 GENERAL INFORMATION ........................................................................................................... 4 3.1 GENERAL DESCRIPTION OF E.U.T. ............................................................................................ 4 3.2 DETAILS OF E.U.T. .................................................................................................................. 4 3.3 SEPARATION DISTANCE............................................................................................................ 4 3.4 TEST LOCATION ...................................................................................................................... 5 3.5 TEST FACILITY ........................................................................................................................ 5 4 FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS ........................................................ 6 4.1 BLANKET 1 MW BLANKET EXEMPTION........................................................................................ 6 4.2 MPE-BASED EXEMPTION.......................................................................................................... 6 4.3 SAR-BASED EXEMPTION .......................................................................................................... 7 5 IC RADIOFREQUENCY RADIATION EXPOSURE LIMITS ........................................................... 9 6 MEASUREMENT AND CALCULATION ...................................................................................... 10 6.1 MAXIMUM TRANSMIT POWER ................................................................................................... 10 6.2 RF EXPOSURE CALCULATION ................................................................................................. 10 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230200029003 Page: 4 of 10 3 General Information 3.1 General Description of E.U.T. Power supply: DC 14.4V 2.5Ah Rechargeable battery Charging adapter: Model:MX24Z2-1801000 Input:100-240V~50-60Hz Output:18V 1A Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: PCB Antenna Antenna Gain: -9.96 dBi (Provided by manufacturer) S/N: DB18EC3441C4 Firmware Version: 1.15.0 3.3 Separation Distance Separation distance between the antenna to person (R): ＜5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230200029003 Page: 5 of 10 3.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. E&E Lab 588 West Jindu Road, Xinqiao, Songjiang, 201612 Shanghai, China. Tel: +86 21 6191 5666 Fax: +86 21 6191 5678 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 6332.01) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. is accredited by the American Association for Laboratory Accreditation(A2LA). • FCC (Designation Number: CN1301) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. has been recognized as an accredited testing laboratory. • ISED (CAB Identifier: CN0020) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. EMC Laboratory has been recognized by Innovation, Science and Economic Development Canada (ISED) as an accredited testing laboratory. Company Number: 8617A • VCCI (Member No.: 3061) The 3m Semi-anechoic chamber and Shielded Room of SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. has been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: R-13868, C-14336, T-12221, G-10830 respectively. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230200029003 Page: 6 of 10 4 FCC Radiofrequency radiation exposure limits Test exemptions apply for devices used in general population/uncontrolled exposure enviro…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230200029002 Page: 1 of 82 Parlam Zhan Laboratory Manager TEST REPORT Application No.: SHCR2302000290HS FCC ID: 2AWQY-HV2001 IC: 26929-HV2001 Applicant: Hyperice, Inc. Address of Applicant: 525 Technology Drive, Suite 100, Irvine, California, 92618 Manufacturer: Zhejiang Honghei Technology Co. LTD Address of Manufacturer: No.1 Juxian Road,Huzhen Town,Jinyun county,Zhejiang Province Factory: Zhejiang Honghei Technology Co. LTD Address of Factory: No.1 Juxian Road,Huzhen Town,Jinyun county,Zhejiang Province Equipment Under Test (EUT): EUT Name: Hypervolt 2 Model No.: HV2001 Trade Mark: HYPERICE Standard(s) : 47 CFR Part 15, Subpart C 15.247 RSS-247 Issue 2, February 2017 RSS-Gen Issue 5 Amendment 2 (February 2021) Date of Receipt: 2023-02-17 Date of Test: 2023-03-18 to 2023-03-23 Date of Issue: 2023-03-24 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230200029002 Page: 2 of 82 Revision Record Version Description Date Remark 00 Original 2023-03-24 / Authorized for issue by: Bill Wu/Project Engineer Parlam Zhan/Reviewer SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230200029002 Page: 3 of 82 2 Test Summary Radio Spectrum Technical Requirement Item FCC Requirement IC Requirement Method Result Antenna Requirement 47 CFR Part 15, Subpart C 15.203 & 15.247(c) RSS-Gen Clause 6.8 N/A Customer Declaration N/A: Not applicable Radio Spectrum Matter Part Item FCC Requirement IC Requirement Method Result Minimum 6dB Bandwidth 47 CFR Part 15, Subpart C 15.247a(2) RSS-247 Clause 5.2(a) ANSI C63.10 (2013) Section 11.8.1 Pass Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247(b)(3) RSS-247 Clause 5.4(d) ANSI C63.10 (2013) Section 11.9.1 Pass Power Spectrum Density 47 CFR Part 15, Subpart C 15.247(e) RSS-247 Clause 5.2(b) ANSI C63.10 (2013) Section 11.10.2 Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247(d) RSS-247 Clause 5.5 ANSI C63.10 (2013) Section 11.13.3.2 Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247(d) RSS-247 Clause 5.5 ANSI C63.10 (2013) Section 11.11 Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.209 & 15.247(d) RSS-247 Section 3.3 & RSS-Gen Section 8.9 ANSI C63.10 (2013) Section 6.10.5 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.209 & 15.247(d) RSS-247 Section 3.3 & RSS-Gen Section 8.9 ANSI C63.10 (2013) Section 6.4,6.5,6.6 Pass 99% Bandwidth - RSS-Gen Section 6.7 ANSI C63.10 Section 6.9.3 Pass SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230200029002 Page: 4 of 82 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................. 3 3 CONTENTS ......................................................................................................................................... 4 4 GENERAL INFORMATION .................................................................................................................. 6 4.1 DETAILS OF E.U.T. ......................................................................................................................... 6 4.2 DESCRIPTION OF SUPPORT UNITS .................................................................................................... 6 4.3 POWER LEVEL SETTING USING IN TEST .............................................................................................. 6 4.4 MEASUREMENT UNCERTAINTY & DECISION RULE............................................................................... 7 4.5 TEST LOCATION ............................................................................................................................. 8 4.6 TEST FACILITY ............................................................................................................................... 8 4.7 DEVIATION FROM STANDARDS ......................................................................................................... 8 4.8 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 8 5 EQUIPMENT LIST ............................................................................................................................... 9 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................10 6.1 ANTENNA REQUIREMENT ................................................................................................................10 6.1.1 Test Requirement: ..................................................................................................................10 6.1.2 Conclusion ..............................................................................................................................10 7 RADIO SPECTRUM MATTER TEST RESULTS .................................................................................11 7.1 CONDUCTED PEAK OUTPUT POWER ................................................................................................11 7.1.1 E.U.T. Operation .....................................................................................................................11 7.1.2 Test Setup Diagram ................................................................................................................11 7.1.3 Measurement Procedure and Data .........................................................................................11 7.2 MINIMUM 6DB BANDWIDTH .............................................................................................................12 7.2.1 E.U.T. Operation ....…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Service （Suzhou）Co., Ltd. Report No.:SEWM2304000124OA01 Rev.01 Page: 1 of 13 ANTENNA PASSIVE TEST REPORT Application No.SEWM2304000124OA ApplicantHyperice, Inc. ManufacturerHyperice, Inc. Product NameHypervolt 2 (Fascia gun) Model NoHV2001 StandardsIEEE Std 149 ™ -2021 Date Initial Sample(s) Received2023.04.19 Testing Start Date 2023.04.20 Testing Finish Date 2023.04.20 Report Issue Date 2023.05.04 Comments/ Conclusion: The configuration tested complied to the certification requirements specified in this report. Leno Shi Caleb Gao Panta Sun Prepared by Reviewed by Approved by The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. SGS-CSTC Standards Technical Service （Suzhou）Co., Ltd. Report No.:SEWM2304000124OA01 Rev.01 Page: 2 of 13 REVISION HISTORY Report No.VersionDateMemo SEWM2304000124OA01012023/05/04The final version of report SGS-CSTC Standards Technical Service （Suzhou）Co., Ltd. Report No.:SEWM2304000124OA01 Rev.01 Page: 3 of 13 TABLE OF CONTENTS 1.GENERAL INFORMATION................................................................4 1.1DETAILS OF CLIENT....................................................................4 1.2TEST LOCATION........................................................................4 1.3GENERAL DESCRIPTION OF EUT...............................................5 1.4TEST PROCEDURE.......................................................................5 1.5LABORATORY ENVIRONMENT....................................................5 2. OTA MEASUREMENTS SYSTEM CONFIGURATION.......................6 2.1 TEST CONFIGURATION.................................................................6 2.2 TEST MEASUREMENT....................................................................6 3.TEST EQUIPMENT LIST...................................................................7 4.MEASUREMENT UNCERTAINTY.....................................................8 5.TEST RESULTS................................................................................9 5.1 ANTENNA.......................................................................................9 6.3-D ANTENNA PATTERN..............................................................10 6.1 2400MHZ.....................................................................................10 6.2 2450MHZ....................................................................................11 6.3 2500MHZ....................................................................................12 7.EUT AND TEST CONFIGURATION...............................................13 SGS-CSTC Standards Technical Service （Suzhou）Co., Ltd. Report No.:SEWM2304000124OA01 Rev.01 Page: 4 of 13 1.General Information 1.1Details of Client Applicant Hyperice, Inc. Address: 525 Technology Drive, Suite 100, Irvine, California, 92618 Manufacturer Hyperice, Inc. Address: 525 Technology Drive, Suite 100, Irvine, California, 92618 1.2Test Location Company SGS-CSTC Standards Technical Service（Suzhou）Co., Ltd. Address South of No. 6 Plant, No. 1, Runsheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone Post Code 215000 Telephone +86(0)512-62990300 Fax +86(0)512-62990300 S…

Text truncated - open the document above for the full version.