2AWSC-A12Wireless Earphones

Connect Reset Bluetooth, Click the Pairing 1. Take out the earbuds Bluetooth Device nameK30 > If earbuds has any connection or function problems, please reset the earbuds 1. Delete the BT pairing information on the phone. 2. Put the earbuds into the charging case to charge. 3. Take out the earbuds and wait for 20 seconds. (If the above operation does not work, please try again) ① Can be connected but there is no sound: Click the right earbuds to increase the volume. ② One of earbuds cannot be charge: Clean the charging contact of the earbuds and the charging case. ③ One of the earbuds cannot be connected: Reset the earbuds. If the earbuds cannot be charged, please activate the warranty and contact us to send a new product. Please clean the charging contacts of the earbuds and charging case frequently to avoid charging failures. Operation X1: Click Once X2: Click 2 times Bluetooth Device name Available Devices A12 Nova7 > Answer/Hang up Power on/off 2S： (Earbuds auto power on) 2. to After open the phone < A12 > Play /PauseSwitch SongAdjust Volume （When no conected） Press and hold for 2 seconds Reject CallVoice Assistant Verbinden Zurücksetzen 2. Nachdem Sie das Bluetooth des Telefons geöffnet haben, klicken Sie auf < A12 > zum Koppeln 1. Nehmen Sie die Ohrhörer heraus (Ohrhörer automatisch einschalten) Bluetooth Device nameK30 > Wenn die Ohrhörer Verbindungs- oder Funktionsprobleme haben, setzen Sie die Ohrhörer bitte zurück 1. Löschen Sie die BT-Kopplungsinformationen auf dem Telefon. 2. Legen Sie die Ohrhörer zum Aufladen in das Ladeetui. 3. Nehmen Sie die Ohrhörer heraus und warten Sie 20 Sekunden. (Wenn der obige Vorgang nicht funktioniert, versuchen Sie es bitte erneut) Betrieb Song wechselnLautstärke anpassen X1: Klicken Sie einmal X2: Klick 2 mal Wiedergabe/Pause Bluetooth Device name Available Devices A12 Nova7 > Antworten/Auflegen Einschalten/Ausschalten (Wenn nicht verbunden) 2S： 2 Sekunden lang gedrückt halten Anruf ablehnenSprachassistent Relier Réinitialiser 2. Après avoir ouvert le téléphone Bluetooth, cliquez sur < A12 > pour jumeler 1. Retirez les écouteurs (Les écouteurs s'allument automatiquement) Bluetooth Device nameK30 > Si les écouteurs ont des problèmes de connexion ou de fonctionnement, veuillez réinitialiser les écouteurs 1. Supprimez les informations de couplage BT sur le téléphone. 2. Placez les écouteurs dans le boîtier de charge pour charger. 3. Retirez les écouteurs et attendez 20 secondes. (Si l'opération ci-dessus ne fonctionne pas, veuillez réessayer) Opération Changer de chansonAjuster le volume X1: Cliquez une fois X2: Cliquez 2 fois Lecture/Pause Bluetooth Device name Available Devices A12 Nova7 > Répondre/Raccrocher Marche / Arrêt (Lorsqu'il n'est pas connecté) 2S： Appuyez et maintenez pendant 2 secondes Rejeter l'appelAssistant vocal Collegare Ripristina 2. Dopo aver aperto il telefono Bluetooth, fare clic su < A12 > per l'associazione 1. Tira fuori gli auricolari (Accensione automatica degli auricolari) Bluetooth Device nameK30 > Se gli auricolari hanno problemi di connessione o di funzionamento, ripristinare gli auricolari 1. Eliminare le informazioni di associazione BT sul telefono. 2. Metti gli auricolari nella custodia di ricarica per caricare. 3. Estrarre gli auricolari e attendere 20 secondi. (Se l'operazione di cui sopra non funziona, riprovare) Cambia canzoneRegola il volume X1: Fare clic una volta X2: Fare clic 2 volte Riproduci/Pausa Bluetooth Device name Available Devices A12 Nova7 > Rispondi/Riaggancia Accensione/spegnimento （When no conected） 2S： Tenere premuto per 2 secondi Rifiuta chiamataAssistente vocale Conectar Reiniciar 2. Después de abrir el teléfono Bluetooth, haga clic en < A12 > para emparejar 1. Saca los auriculares (Encendido automático de auriculares) Bluetooth Device nameK30 > Si los auriculares tienen algún problema de conexión o función, reinicie los auriculares 1. Elimina la información de emparejamiento de BT del teléfono. 2. Coloque los auriculares en el estuche de carga para cargarlos. 3. Quítese los auriculares y espere 20 segundos. (Si la operación anterior no funciona, inténtelo de nuevo) Operación Cambiar de canción Ajusta el volúmen X1: Haga clic una vez X2: Fare clic 2 volte Reproducir / Pausar Bluetooth Device name Available Devices A12 Nova7 > Responder / colgar Encendido / apagado (Cuando no está conectado) 2S： Mantenga pulsado durante 2 segundos Llamada rechazada Asistente de voz 接続 リセット 2. 携帯電話のBluetoothを開 いた後、< A12 >をクリックし てペアリングします 1. イヤフォンを取り出します （Earbudsの自動電源オン） Bluetooth Device nameK30 > イヤフォンに接続または機能の問題がある場合は、イヤフォン をリセットしてください 1. 電話のBTペアリング情報を削除します。 2. イヤフォンを充電ケースに入れて充電します。 3. イヤフォンを取り出し、20秒待ちます。 （上記の操作がうまくいかない場合は、もう一度やり直してく ださい） 操作 曲を切り替える音量を調整する X1: 1 回クリック X2: 2 回クリック 再生/一時停止 Bluetooth Device name Available Devices A12 Nova7 > 回答/電話を切る 電源のオン/オフ （接続されていない場合） 2S： 2秒間押し続けます 通話を拒否する音 声アシスタント operazione X2 - + 5S X1 2S X2 - + 5S X1 2S X2 - + 5S X1 2S X2 - + 5S X1 2S X2 - + 5S X1 2S X2 - + 5S X1 2S Problem handling ① Kann verbunden werden, aber kein Ton: Klicken Sie auf die rechten Ohrhörer, um die Lautstärke zu erhöhen. ② Einer der Ohrhörer kann nicht aufgeladen werden: Reinigen Sie die Ladekontaktpunkte der Ohrhörer und des Ladeetuis. ③ Einer der Ohrhörer kann nicht verbunden werden: Setzen Sie die Ohrhörer zurück. Wenn die Ohrhörer nicht aufgeladen werden können, aktivieren Sie bitte die Garantie und kontaktieren Sie uns, um ein neues Produkt zu senden. Bitte reinigen Sie die Ladekontakte der Ohrhörer und des Ladeetuis regelmäßig, um Ladefehler zu vermeiden. Problembehandlung Peut être connecté mais il n'y a pas de son : Cliquez sur les écouteurs de droite pour augmenter le volume. ② L'un des écouteurs ne peut pas être chargé : Nettoyez les points de contact de charge des écouteurs et du boîtier de charge. ③ L'un des écouteurs ne peut pas être connecté : Réinitialisez les écouteurs. Si les écouteurs ne peuvent pas être chargés, veuillez activer la garantie et nous contacter pour envoyer un nouveau pr…

Text truncated - open the document above for the full version.

Shenzhen Bonfin Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 5/15/2024 U.S. Agent Designation Shenzhen Bonfin Technology Co., Ltd. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2AWSC-A12): Name and company of U.S. agent: FCC US Agent, LLC Physical U.S. address of agent: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA FRN of U.S. agent: 0033402884 Email address of U.S. agent: [email protected] FCC US Agent, LLC acknowledges their obligation to accept service of process on behalf of Shenzhen Bonfin Technology Co., Ltd.. Shenzhen Bonfin Technology Co., Ltd. with the FRN 0028293942 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. S incerely, Signature Jason zhou Manager Shenzhen Bonfin Technology Co., Ltd. Signature Tim Payne Manager FCC US Agent, LLC 48_[model] US_Agent_2.911(d)(7)-U, V05

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows: We, applicant Company Name: ShenZhen BonFin Technology Co., Ltd. Address: South floor 5, Xinlong Science and Technology Park, 2 Wangshan 1st Road, Shajing, Baoan District, Shenzhen, China Phone: +86-18823329916 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-05-15 Name / Title: Jason Zhou / Manager Company: ShenZhen BonFin Technology Co., Ltd. Address: South floor 5, Xinlong Science and Technology Park, 2 Wangshan 1st Road, Shajing, Baoan District, Shenzhen, China Phone: +86-18823329916 Fax: +86-755-23319235 E-Mail: [email protected]

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2AWSC-A12 A12, A10, A11, A16, A18, A1, A2, A3, S1, S6, S8, S9, P18, P19, G3, G5, G6, G8, G9 We, applicant Company Name: ShenZhen BonFin Technology Co., Ltd. Address: South floor 5, Xinlong Science and Technology Park, 2 Wangshan 1st Road, Shajing, Baoan District, Shenzhen, China Phone: +86-18823329916 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-05-15 Name / Title: Jason Zhou / Manager Company: ShenZhen BonFin Technology Co., Ltd. Address: South floor 5, Xinlong Science and Technology Park, 2 Wangshan 1st Road, Shajing, Baoan District, Shenzhen, China Phone: +86-18823329916 Fax: +86-755-23319235 E-Mail: [email protected]

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name 2AWSC-A12 A12, A10, A11, A16, A18, A1, A2, A3, S1, S6, S8, S9, P18, P19, G3, G5, G6, G8, G9 For the products listed above, we request permanent confidentiality for all applicable exhibits as there are: • the Operational Description • the Block Diagram • the Schematics • the Part List • the Tune up Information The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-05-15 Name / Title: Jason Zhou / Manager Company: ShenZhen BonFin Technology Co., Ltd. Address: South floor 5, Xinlong Science and Technology Park, 2 Wangshan 1st Road, Shajing, Baoan District, Shenzhen, China Phone: +86-18823329916 Fax: +86-755-23319235 E-Mail: [email protected]

ShenZhen BonFin Technology Co., Ltd. South floor 5, Xinlong Science and Technology Park, 2 Wangshan 1st Road, Shajing, Baoan District, Shenzhen, China Date: May 15, 2024 FCC ID: 2AWSC-A12 Model Number: A12, A10, A11, A16, A18, A1, A2, A3, S1, S6, S8, S9, P18, P19, G3, G5, G6, G8, G9 To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, ShenZhen BonFin Technology Co., Ltd. hereby declare that our product (Wireless Earphones) Model Number: A12, A10, A11, A16, A18, A1, A2, A3, S1, S6, S8, S9, P18, P19, G3, G5, G6, G8, G9 board, Schematic, Hardware version, Software version, structure and internal photos are same, named differently due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, (Signed) Name/Title: Jason Zhou / Manager Company: ShenZhen BonFin Technology Co., Ltd. Address: South floor 5, Xinlong Science and Technology Park, 2 Wangshan 1st Road, Shajing, Baoan District, Shenzhen, China Tel: +86-18823329916 Fax: +86- 755-23319235 E-Mail: [email protected]

Page1of4FCCID:2AWSC-A12 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity ExternalPhotosoftheEUT Fig1 Fig2 Page2of4FCCID:2AWSC-A12 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig3 Fig4 Page3of4FCCID:2AWSC-A12 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig5 Fig6 Page4of4FCCID:2AWSC-A12 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig7

Page1of1FCCID:2AWSC-A12 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity LABELANDLOCATION (Size:L8.2cmxW5.5cm) LabelLocation WirelessEarphones Model:A12 FCCID:2AWSC-A12

Page 1 of 6 FCC ID: 2AWSC-A12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Internal Photos of the EUT Fig. 1 Fig. 2 Page 2 of 6 FCC ID: 2AWSC-A12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 6 FCC ID: 2AWSC-A12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Page 4 of 6 FCC ID: 2AWSC-A12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7 Fig. 8 Antenna Page 5 of 6 FCC ID: 2AWSC-A12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 9 Fig. 10 Page 6 of 6 FCC ID: 2AWSC-A12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 11 Antenna

Page 1 of 4 FCC ID: 2AWSC-A12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC RF Exposure Evaluation 1. Product Information FCC ID : 2AWSC-A12 Product name : Wireless Earphones Test Model : A12 Power Supply : Input: DC 5V 1000mA Battery: DC 5V, 1A Hardware Version : / Software Version / Bluetooth : 2402MHz ~ 2480MHz Channel Number : 79 channels for Bluetooth V5.3 (DSS) 40 channels for Bluetooth V5.3 (DTS) Channel Spacing : 1MHz for Bluetooth V5.3(DSS) 2MHz for Bluetooth V5.3(DTS) Modulation Type : GFSK, π/4-DQPSK, 8-DPSK for Bluetooth V5.3 (DSS) GFSK for Bluetooth V5.3 (DTS) Bluetooth Version : V5.3 Antenna Type : Chip Antenna Antenna Gain : 2.67dBi Exposure category : General population/uncontrolled environment EUT Type : Production Unit Device Type : Portable Device 2. Evaluation method and Limit According to KDB447498 D01 General RF Exposure Guidance v06 Section 4.3.1 Standalone SAR test exclusion considerations: “Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.“ Page 2 of 4 FCC ID: 2AWSC-A12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity [(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)] · [√f (GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to f) in section 4.1 is applied to determine SAR test exclusion. When one of the following test exclusion conditions is satisfied for all combinations of simultaneous transmission configurations, further equipment approval is not required to incorporate transmitter modules in host devices that operate in the mixed mobile and portable host platform exposure conditions. The grantee is responsible for documenting this according to Class I permissive change requirements. Antennas that qualify for standalone SAR test exclusion must apply the estimated standalone SAR to determine simultaneous transmission test exclusion. a) The [∑ of (the highest measured or estimated SAR for each standalone antenna configuration, adjusted for maximum tune-up tolerance) / 1.6 W/kg] + [∑ of MPE ratios] is ≤ 1.0. b)The SAR to peak location separation ratios of all simultaneously transmitting antenna pairs operating in portable device exposure conditions are all ≤ 0.04, and the [∑ of MPE ratios] is ≤ 1.0. 3. Refer Evaluation Method ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 447498 D01 General RF Exposure Guidance v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1093: Radiofrequency radiation exposure evaluation: portable devices 4. Conducted Power Results <BT> Mode Channel Frequency (MHz) Peak Conducted Output Power (dBm) GFSK 0 2402 -0.13 39 2441 -0.22 78 2480 -0.45 π/4DQPSK 0 2402 -0.10 39 2441 -0.74 78 2480 0.28 8DPSK 0 2402 0.22 39 2441 -0.35 78 2480 0.30 <BT LE> Mode Channel Frequency (MHz) Peak Conducted Output Power (dBm) Page 3 of 4 FCC ID: 2AWSC-A12 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity GFSK 0 2402 -0.62 …

Text truncated - open the document above for the full version.

UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ ANGLES＝ ± HOLEDIA＝ ± SCALE：N/AUNIT：mm THESEDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFPBXY TECHNOLOGYLimitedANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION DRAWNBY:SeraCHECKEDBY:XD DESIGNEDBY:SeraAPPROVEDBY:XD TITLE：CHIP2450-3216Specification DOCUMENT NO. 3216 SPECREV. P1 产品规格承认书 SPECIFICATIONS 客户: CUSTOMER: 产品名称: DESCRIPTION:双极天线 客户型号: CUSTOMERPARTNo: 产品型号: OURMODELNO:PBX3216HC01 日期: DATE: 确认签字,盖章后请返回承认书一份 PLEASERETURNTOUSONECOPYOF“SPECIFICATIONFORAPPROVAL” WITHYOURAPPROVEDSIGNATURES 核准审核刘飞制作刘小美 客户承认签印 日期 Shenzhen Pengbangxingye Technology Co., Ltd. Shenzhen Pengbangxingye Technology Co., Ltd. Address: 605, Building 4, 1970 Science and Technology Town, Minzhi Street, Longhua District, Shenzhen, Guangdong, China Phone: +86-13823267887 UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ ANGLES＝ ± HOLEDIA＝ ± SCALE：N/AUNIT：mm THESEDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFPBXY TECHNOLOGYLimitedANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION DRAWNBY:SeraCHECKEDBY:XD DESIGNEDBY:SeraAPPROVEDBY:XD TITLE：CHIP2450-3216Specification DOCUMENT NO. 3216 SPECREV. P1 PBX3216HC01Specification OperatingTemp.:-40°C~+85°C 1. FEATURES : ●Lightweight,compact ●Widebandwidth,lowcost ●Built-inantennawithhighgain 2. APPLICATIONS : ●Bluetooth,WirelessLAN,MobileTV ●HomeRFSystem,etc 3.PRODUCTIDENTIFICATION (1)(2)(3) (1)Producttype:MultilayerchipAntenna (2)CenterFrequency:2450MHz (3)ExternalDimensions(L×W)(mm):3.2*1.6 4.SHAPEANDDIMENSIONS: LWHA 3.2±0.21.6±0.2 0.52 ± 0.10.4 ± 0.1 CH IP45 032 2 16 Shenzhen Pengbangxingye Technology Co., Ltd. Shenzhen Pengbangxingye Technology Co., Ltd. UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ ANGLES＝ ± HOLEDIA＝ ± SCALE：N/AUNIT：mm THESEDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFPBXY TECHNOLOGYLimitedANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION DRAWNBY:SeraCHECKEDBY:XD DESIGNEDBY:SeraAPPROVEDBY:XD TITLE：CHIP2450-3216Specification DOCUMENT NO. 3216 SPECREV. P1 测试板参考尺寸： 单位：mm Shenzhen Pengbangxingye Technology Co., Ltd. Shenzhen Pengbangxingye Technology Co., Ltd. UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ ANGLES＝ ± HOLEDIA＝ ± SCALE：N/AUNIT：mm THESEDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFPBXY TECHNOLOGYLimitedANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION DRAWNBY:SeraCHECKEDBY:XD DESIGNEDBY:SeraAPPROVEDBY:XD TITLE：CHIP2450-3216Specification DOCUMENT NO. 3216 SPECREV. P1 打孔参考示意图 APPLICATIONGUIDE 5.SPECIFICATIONS: *Testcondition:Testboardsize90*40mm Matchingcircuit:Pimatchingcircuitwillberequired Shenzhen Pengbangxingye Technology Co., Ltd. Shenzhen Pengbangxingye Technology Co., Ltd. UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ ANGLES＝ ± HOLEDIA＝ ± SCALE：N/AUNIT：mm THESEDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFPBXY TECHNOLOGYLimitedANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION DRAWNBY:SeraCHECKEDBY:XD DESIGNEDBY:SeraAPPROVEDBY:XD TITLE：CHIP2450-3216Specification DOCUMENT NO. 3216 SPECREV. P1 6.ElectricalCharacteristics: 回波损耗 驻波比 MarkFrequencyVSWR 12400MHz1.513 22440MHz1.068 32480MHz1.464 Shenzhen Pengbangxingye Technology Co., Ltd. Shenzhen Pengbangxingye Technology Co., Ltd. UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ ANGLES＝ ± HOLEDIA＝ ± SCALE：N/AUNIT：mm THESEDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFPBXY TECHNOLOGYLimitedANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION DRAWNBY:SeraCHECKEDBY:XD DESIGNEDBY:SeraAPPROVEDBY:XD TITLE：CHIP2450-3216Specification DOCUMENT NO. 3216 SPECREV. P1 RadiationPattern TheGainpatternismeasuredinFAR-fieldchamber.DUTisplacedonthetableofrotator,a standardhornantennaandVectorNetworkAnalyzerisusedtocollectdata. ◎效率 最大增益 Shenzhen Pengbangxingye Technology Co., Ltd. Shenzhen Pengbangxingye Technology Co., Ltd. UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ ANGLES＝ ± HOLEDIA＝ ± SCALE：N/AUNIT：mm THESEDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFPBXY TECHNOLOGYLimitedANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION DRAWNBY:SeraCHECKEDBY:XD DESIGNEDBY:SeraAPPROVEDBY:XD TITLE：CHIP2450-3216Specification DOCUMENT NO. 3216 SPECREV. P1 ◎3DGainPattern(2400MHz) ◎3DGainPattern(2440MHz) ◎3DGainPattern(2480MHz) Shenzhen Pengbangxingye Technology Co., Ltd. Shenzhen Pengbangxingye Technology Co., Ltd. UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ ANGLES＝ ± HOLEDIA＝ ± SCALE：N/AUNIT：mm THESEDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFPBXY TECHNOLOGYLimitedANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION DRAWNBY:SeraCHECKEDBY:XD DESIGNEDBY:SeraAPPROVEDBY:XD TITLE：CHIP2450-3216Specification DOCUMENT NO. 3216 SPECREV. P1 7.EnvironmentalCharacteristics (1)ReliabilityTest (2)StorageCondition (a)Atwarehouse: Thetemperatureshouldbewithin0~30°Candhumidityshouldbelessthan60%RH. Theproductshouldbeusedwithin1yearfromthetimeofdelivery. (b)Onboard: Thetemperatureshouldbewithin-40~85°Candhumidityshouldbelessthan85%RH. (3)OperatingTemperatureRange Operatingtemperaturerange:-40 °C to+105 °C . Shenzhen Pengbangxingye Technology Co., Ltd. Shenzhen Pengbangxingye Technology Co., Ltd. UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ ANGLES＝ ± HOLEDIA＝ ± SCALE：N/AUNIT：mm THESEDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFPBXY TECHNOLOGYLimitedANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION DRAWNBY:SeraCHECKEDBY:XD DESIGNEDBY:SeraAPPROVEDBY:XD TITLE：CHIP2450-3216Specification DOCUMENT NO. 3216 SPECREV. P1 8.RecommendedReflowSoldering (1)SolderingGunProcedure Notethefollows,incaseofusingsoldergunforreplacement. (a)Thetiptemperaturemustbelessthan350 ° Cfortheperiodwithin3secondsby usingsolderinggununder30W. (b)Thesolderingguntipshallnottouchthisproductdirectly. (2)SolderingVol…

Text truncated - open the document above for the full version.

Page 1 of 62 FCC ID:2AWSC-A12 Report No.: LCSA04254052EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Appendix B RF Test Data for BT LE (Conducted Measurement) Product Name: Wireless Earphones Test Model: A12 Environmental Conditions Temperature: 23.8 C Relative Humidity: 52.1% ATM Pressure: 100.0 kPa Test Engineer: Summer Wu Supervised by: Nick Peng Page 2 of 62 FCC ID:2AWSC-A12 Report No.: LCSA04254052EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.1 20dB Emission Bandwidth Test Result TestMode Antenna Frequency[MHz] 20db EBW[MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict DH5 Ant1 2402 1.005 2401.481 2402.486 --- --- 2441 0.996 2440.499 2441.495 --- --- 2480 1.005 2479.490 2480.495 --- --- 2DH5 Ant1 2402 1.296 2401.361 2402.657 --- --- 2441 1.293 2440.361 2441.654 --- --- 2480 1.287 2479.367 2480.654 --- --- 3DH5 Ant1 2402 1.305 2401.349 2402.654 --- --- 2441 1.302 2440.352 2441.654 --- --- 2480 1.317 2479.343 2480.660 --- --- Page 3 of 62 FCC ID:2AWSC-A12 Report No.: LCSA04254052EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs DH5_Ant1_2402 DH5_Ant1_2441 DH5_…

Text truncated - open the document above for the full version.