2AWT2-BIO-AXBody Worn Camera

Bio-AX® Camera Operation Manual 2020 Page: Pg 1 of 23 Document ID: Bio-AX® Camera Manual Version: 1.0 Date of Approval: 24/09/2020 Next Review Date: 24/09/2021 Bio-AX® Camera Operation Manual Document Version: 1.1 Document Security: OFFICIAL: COMMERCIAL Bio-AX® Camera Operation Manual 2020 Page: Pg 2 of 23 Document ID: Bio-AX® Camera Manual Version: 1.0 Date of Approval: 24/09/2020 Next Review Date: 24/09/2021 INTENTIONALLY LEFT BLANK Bio-AX® Camera Operation Manual 2020 Page: Pg 3 of 23 Document ID: Bio-AX® Camera Manual Version: 1.0 Date of Approval: 24/09/2020 Next Review Date: 24/09/2021 Version Control Document Location If using a printed version of this document, ensure it is the latest publishe d version. Version Date Approved Publication Date Approved By Summary of Changes 1.0 20/09/2020 24/09/2020 Audax New Document 2.0 Bio-AX® Camera Operation Manual 2020 Page: Pg 4 of 23 Document ID: Bio-AX® Camera Manual Version: 1.0 Date of Approval: 24/09/2020 Next Review Date: 24/09/2021 Page Paragraph Description 6 1 Statement 6 2 System Component 6 3 System Features 7 4 Notes/Warnings 8 5 Camera Views 9 6 General System Operation 11 7 Playback Menu 12 8 Camera Settings 13 9 Data Upload 14 10 General Settings 15 11 About Settings 16 12 Cam Manager 22 Warranty Bio-AX® Camera Operation Manual 2020 Page: Pg 5 of 23 Document ID: Bio-AX® Camera Manual Version: 1.0 Date of Approval: 24/09/2020 Next Review Date: 24/09/2021 INTENTIONALLY LEFT BLANK Bio-AX® Camera Operation Manual 2020 Page: Pg 6 of 23 Document ID: Bio-AX® Camera Manual Version: 1.0 Date of Approval: 24/09/2020 Next Review Date: 24/09/2021 1. Statement a. The content descripted in the manual may be different from the version you use now, owing to our commitment to progressive development. b. If you encounter the problem which is unable to be solved at the time of using this manual, please contact us directly. The content of the manual will be updated irregularly, and the updated content detailed on within the version control. 2. System Component. The system is supplied in a packaged 6 case box complete with the following: a. Chest camera. b. Internal (non-removable)32 Gb solid state memory card. c. USB 2.0 Cable. d. 360̊ crocodile clip. 3. System Features. a. Full HD video recording. b. Live Streaming ( 4G / LTE / Wi-Fi). c. Solid State memory. d. Still image capture. e. Audio. f. IR (Auto or Manual). g. GPS. h. 140° Wide Angle Lens. i. AES256 Encryption. j. IP67. Bio-AX® Camera Operation Manual 2020 Page: Pg 7 of 23 Document ID: Bio-AX® Camera Manual Version: 1.0 Date of Approval: 24/09/2020 Next Review Date: 24/09/2021 4. NOTES / WARNINGS a. Charging Battery – Prior to first use of the system, charge the battery for a minimum of four hours. When the battery is fully charged, the flashing Blue “POWER” LED on the top of the device will turn OFF. Please note that your camera may arrive already fully charged, so don't be surprised if, the first time you try to charge it, the red “charging” light does not come on. a. Connection to PC – The Camera DOES NOT allow direct connection to a PC for downloading of data. The ONLY way this can be achieved is by using the CamManager software (Please note that this process is different if using the Audax Bio-AX Docking Station). b. Changing Settings – We recommend that all recorded video / image files are backed up before changing any system settings. Failure to do so may cause recorded footage/files to be deleted. c. Internal Memory – Gaining or attempting to gain physical access to the Internal Memory will invalidate the system Warranty. d. Cables – Only ever use the supplied cables. Using other “similar” cables may invalidate the system Warranty. e. Password Protection – The Chest Camera device has two different Passwords set: 1) For General Users. The “Settings” Menu has the initial password set as 000000 (Please see Section 12, para B part 5 for details of how to set Passwords). 2) The password will not allow access to administrator settings and downloading with this password. Audax recommend that this Password is re-set and safely recorded at the earliest opportunity. 3) For Admin Users. The “Settings” Menu has the initial password set as 888888 (Please see Section 12, para B part 5 for details of how to set Passwords). 4) This password will allow access all to administrator settings and downloading with this password. Audax recommend that this Password is re-set and safely recorded at the earliest opportunity. f. IMPORTANT NOTE: If, after setting, your password is lost then the device will have to be returned to be re-set. In that event, a fee will be chargeable and any footage held on the unit might be erased as part of the re-setting process. Bio-AX® Camera Operation Manual 2020 Page: Pg 8 of 23 Document ID: Bio-AX® Camera Manual Version: 1.0 Date of Approval: 24/09/2020 Next Review Date: 24/09/2021 g. Screen Protectors – The Chest Camera device may be dispatched with a protective film covering the camera lens (front) and viewing screen (back). Please ensure that the film is peeled off before using. 5. Camera Views a. Top 1) Power (Left) – BLUE LED shows the device is powered. 2) GREEN LED shows the device is ON (standby). 3) Work – RED LED shows the device is Recording. 4) Video. This LED will also show RED. 5) Recording Audio Only. 6) Camera Button (Left) – taking still images. 7) Video Button (Right) – video recording. b. Front 1) Top left – White light filter. 2) Top right – IR Sensor. 3) Centre – Camera lens. 4) Bottom Left/Right – IR Illuminators. 5) Record (Video) button. c. Left 1) PTT button. 2) IR manual button. 3) Audio only IR button. 4) Power On / Off button. Bio-AX® Camera Operation Manual 2020 Page: Pg 9 of 23 Document ID: Bio-AX® Camera Manual Version: 1.0 Date of Approval: 24/09/2020 Next Review Date: 24/09/2021 d. Right 1) USB / SIM Card slot. 2) SOS button. e. Rear 1) 360° detachable clip. 2) Display Screen. 3) (1) “Menu” / “OK” button. 4) (2) “Up” button. 5) (3) “Down…

Text truncated - open the document above for the full version.

Dec 28, 2020 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen Timeway Testing Laboratories/ 5/F,Block 4, Anhua Industrial Zone.,No.8 TaiRan Rd.CheGongMiao,FuTian District, Shenzhen,CHINA. (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Audax Global Solutions Ltd / c/o Francis Clark LLP, North Quay House, Sutton Harbour, Plymouth, United Kingdom <Signature>： Name：Adam Liardet Title：Manager Company：Audax Global Solutions Ltd

Dec 28, 2020 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AWT2-BIO -AX Product Name: Body Worn Camera Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: • Schematics • Block diagram • Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature>： Name：Adam Liardet Title：Manager Applicant Company：Audax Global Solutions Ltd

Cha rrging Base Po wwer Supply

FCC ID: 2AWT2-BIO-AX Contains FCC ID: XMR201808EC25AF

Label Locati Label Location

FCC ID: 2AWT2-BIO-AX RF Exposure Applicable Standard According to §1.1307(b)(5), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. This is a Portable device. The Section 4.3.1 and Appendix A of KDB447498 D01 V05 was used as the guidance. Calculation Result (Worse case) High Channel [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] =6.61/5 * 1.56= 2.06, this value is less than 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. The SAR measurement is not necessary.

Report No.: TW2011042-02E File reference No.: 2020-11-16 Applicant: Audax Global Solutions Ltd Product: Body Worn Camera Model No.: BioAX Trademark: Audax® Test Standards: FCC Part 15.247 Test result: It is herewith confirmed and found to comply with the requirements set up by ANSI C63.10, FCC Part 15.247 for the evaluation of electromagnetic compatibility Approved By Jack Chung Manager Dated: November 16, 2020 Results appearing herein relate only to the sample tested The technical reports is issued errors and omissions exempt and is subject to withdrawal at SHENZHEN TIMEWAY TESTING LABORATORIES Zone C, 1st Floor, Block B, Jun Xiang Da Building, Zhongshan Park Road West, Tong Le Village, Nanshan District, Shenzhen, China Tel (755) 83448688, Fax (755) 83442996, E-Mail:[email protected] Report No.: TW2011042-02E Page 2 of 76 Date: 2020-11-16 The report refers only to the sample tested and does not apply to the bulk. This report is issued in confidence to the client and it will be strictly treated as such by the SHENZHEN TIMEWAY TESTING LABORATORIES. It may not be reproduced rather in its entirety or in part and it may not be used for adverting. The client to whom the report is issued may, however, show or send it . or a certified copy there of prepared by the SHENZHEN TIMEWAY TESTING LABORATORIES. to his customer. Supplier or others persons directly concerned. SHENZHEN TIMEWAY TESTING LABORATORIES. will not, without the consent of the client enter into any discussion of correspondence with any third party concerning the contents of the report. In the event of the improper use of the report. The SHENZHEN TIMEWAY TESTING LABORATORIES. reserves the rights to withdraw it and to adopt any other remedies which may be appropriate. Special Statement： The testing quality ability of our laboratory meet with "Quality Law of People's Republic of China" Clause 19. The testing quality system of our laboratory meets with ISO/IEC-17025 requirements, which is approved by CNAS. This approval result is accepted by MRA of APLAC. Our test facility is recognized, certified, or accredited by the following organizations: CNAS-LAB Code: L2292 The EMC Laboratory has been assessed and in compliance with CNAS-CL01 accreditation criteria for testing Laboratories (identical to ISO/IEC 17025:2005 General Requirements) for the Competence of testing Laboratories. FCC-Registration No.: 744189 The EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications commission. The acceptance letter from the FCC is maintained in our files. Registration No.: 744189. Industry Canada (IC) —Registration No.:5205A The EMC Laboratory has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 5205A. A2LA (Certification Number:5013.01) The EMC Laboratory has been accredited by the American Association for Laboratory Accreditation (A2LA). Certification Number:5013.01 Report No.: TW2011042-02E Page 3 of 76 Date: 2020-11-16 The report refers only to the sample tested and does not apply to the bulk. This report is issued in confidence to the client and it will be strictly treated as such by the SHENZHEN TIMEWAY TESTING LABORATORIES. It may not be reproduced rather in its entirety or in part and it may not be used for adverting. The client to whom the report is issued may, however, show or send it . or a certified copy there of prepared by the SHENZHEN TIMEWAY TESTING LABORATORIES. to his customer. Supplier or others persons directly concerned. SHENZHEN TIMEWAY TESTING LABORATORIES. will not, without the consent of the client enter into any discussion of correspondence with any third party concerning the contents of the report. In the event of the improper use of the report. The SHENZHEN TIMEWAY TESTING LABORATORIES. reserves the rights to withdraw it and to adopt any other remedies which may be appropriate. Test Report Conclusion Content 1.0 General Details ................................................................................................ 4 1.1 Test Lab Details................................................................................................ 4 1.2 Applicant Details.............................................................................................. 4 1.3 Description of EUT .......................................................................................... 4 1.4 Submitted Sample............................................................................................. 4 1.5 Test Duration.................................................................................................... 5 1.6 Test Uncertainty................................................................................................. 5 1.7 Test By.......................................................................................................... 5 2.0 List of Measurement Equipment......................................................................... 6 3.0 Technical Details............................................................................................. 7 3.1 Summary of Test Results..................................................................................... 7 3.2 Test Standards.................................................................................................. 7 4.0 EUT Modification............................................................................................. 7 5.0 Power Line Conducted Emission Test...................................................................... 8 5.1 Schematics of the Test........................................................................................ 8 5.2 Test Method and Test Procedure............................................................................ 8 5.3 Configuration of the EUT.................................................................................... 8 5.4 EUT Operating Condition.................…

Text truncated - open the document above for the full version.

Con nducted Emisssion Test Setuup: Radiiated Emissioon Test Setup: