2AWW4-TRA104-04TR V05-01

TR V05-01 Product Specification and Manual I. Product Overview TR V05-01 is an asset tracking device designed for global supply chain management, specifically engineered for reusable transport containers (including plastic crates and pallets, etc.). Tracker V5-PECO provides enterprises with end-to-end visible logistics tracking solutions, significantly improving asset management efficiency and security. II. Product Highlights  Optimized power management system supports multiple battery types, with theoretical lifespan of 5 years  Wi-Fi fingerprinting + BLE-assisted positioning  Record temperature data  store up to 6 months’ worth of tracking data in case of cellular network coverage outages  Upload data by connecting over the LTE CAT1 cellular network in the North America and third-party WiFi APs.  IP67 waterproof and dustproof, 2-meter drop protection, and suitable for harsh industrial environments III. Detailed Technical Specifications 3.1 Core Processing Unit Item Specification Main Controller ESP32-WROOM-32UE (supports 2.4 GHz Wi-Fi) Firmware Compatibility Existing Sensize firmware, no redevelopment needed 3.2 Low-power Bluetooth Subsystem Item Specification Bluetooth Chip Renesas DA14535 Operating Mode Primarily broadcast mode, can receive data from surrounding BLE devices Item Specification Broadcast Interval Configurable (default 1 second, adjustable based on power consumption requirements) Communication Interface UART connection with main controller Antenna Solution SR4L034-R (4G), SR4W089 (Bluetooth), Airgain N03SZAAA-T2M62-PK1- G275U (WIFI) 3.3 Cellular Communication Module Tracker V6 offers multiple regional versions to optimally meet different market requirements: Version Applicable Region Recommended Module Band Support North America Edition USA, Canada, Mexico Quectel EG800Q-NA LTE CAT1 SIM Card Support:  Standard: MFF2 eSIM (5mm x 6mm, soldered, high reliability)  Optional: Plastic SIM card holder (for R&D testing and special scenarios) 3.4 Positioning and Environmental Monitoring Sensor Model Function Description Accelerometer ST LIS3DHTR Supports motion detection, free-fall recognition, device orientation determination RTC Clock Renesas ISL1208 High-precision timing, built-in watchdog function, with 32KHz crystal Temperature Sensor High-precision thermistor Measurement range: -20°C~+80°C Sensor Model Function Description Wi-Fi Scanning ESP32 integrated Scans surrounding APs for Wi-Fi fingerprint positioning 3.5 Storage and Data Management Item Specification Storage Capacity Can store 6 months of tracking data Data Content Location information, timestamp, temperature data, BLE device data, device status 3.6 Power System Item Pallet Tracking Edition Battery Type 8 x AA Alkaline batteries Battery Capacity - Operating Voltage 3.0V Standby Current <50μA Average Operating Current - Theoretical Lifespan 5 years (depends on usage frequency and environmental temperature) Battery Replacement No replaceable 3.7 Operating Environment Parameters Item Parameter Operating Temperature -20°C ~ +80°C Storage Temperature -20°C ~ +80°C Waterproof Rating IP67 Drop Resistance 2-meter drop onto concrete floor IV. Mechanical Structure and Installation 4.1 Enclosure Structure  Dimensions: L:445mm X 30mm X 17mm  Installation Method: Compatible with standard wooden pallets, can be fixed using screws  Material: Reinforced polycarbonate, excellent impact resistance  Color: Pantone 7499 C V. Application Scenarios 5.1 Pallet Circulation Management  Track pallet movement paths  Calculate pallet utilization rates  Prevent pallet loss VI. Usage Guide 6.1 Device Activation 1. Check device appearance for damage, ensure SN label is clear 2. Battery pre-installed, and device automatically enters initialization and completes network registration and data synchronization 6.2 Installation and Fixing  Fix using screws or zip ties through mounting holes of the pallet blocks 6.3 Maintenance and Care  Regularly check enclosure for damage, ensure sealing is intact VII. Precautions 7.1 Battery Safety  Strictly prohibited to charge, short-circuit, heat, or disassemble batteries  Do not dispose of batteries in fire to avoid explosion  Dispose of waste batteries according to local environmental regulations 7.2 Operating Environment  Although the device is waterproof, prolonged immersion is not recommended  Avoid strong impact or compression of the device to prevent damage to internal components  Operating temperature range -20°C~+80°C, exceeding this range may affect performance 7.3 RF Safety  Device complies with international electromagnetic radiation standards, harmless to human body under normal use  Maintain at least 20cm distance from human body during installation  FCC Warning   This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.   NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  - Reorient or relocate the receiving antenna.  - Increase the separation between the equipment and receiver.  -Connect the equipment into an outlet o…

Text truncated - open the document above for the full version.

Sensize Limited Covered Equipment Certification Attestation Letter 5/22/2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2AWW4-TRA104-04 Sensize Limited (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Sensize Limited (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sensize Limited (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Signed: Printed name: Luke DArcy Title: Manager Company Name: Sensize Limited Date: 5/22/2026

Sensize Limited U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: May 20, 2026 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2AWW4-TRA104-04 Sensize Limited(“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Sensize Limited FRN: 0029770211 Address: Sensize, Future Business Centre, Kings Hedges Road,CambridgeCB4 2HY, UK, Cambridge, United Kingdom Signature: Contact Person: Luke DArcy Tel: +44 754 245 1421 Email: [email protected]

DATE: May 20, 2026 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen CCUT Quality Technology Co., Ltd. (1F, Building 35, Changxing Technology Indstrl Park Changzhen Community, Yutang Street, Shenzhen, China) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Sensize Limited (Sensize, Future Business Centre, Kings Hedges Road,CambridgeCB4 2HY, UK, Cambridge, United Kingdom). <Signature> Name: Luke DArcy Title: Manager Applicant Company: Sensize Limited

Date: May 20, 2026 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, <Signature> Name: Luke DArcy Title: Manager Company: Sensize Limited

DATE: May 20, 2026 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AWW4-TRA104-04 Product Name: TR V05-01 Product Model: TRA104-04-TW01-11500 Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature> Name: Luke DArcy Title: Manager Company: Sensize Limited

Report No: SSP26030546-1E FCC ID: 2AWW4-TRA104-04 Annex of Test Report Annex A. EUT External Photos Model: TRA104-04-TW01-11500 EUT View 1 EUT View 2 Report No: SSP26030546-1E FCC ID: 2AWW4-TRA104-04 Annex of Test Report EUT View 3 EUT View 4 Report No: SSP26030546-1E FCC ID: 2AWW4-TRA104-04 Annex of Test Report EUT View 5 EUT View 6 Report No: SSP26030546-1E FCC ID: 2AWW4-TRA104-04 Annex of Test Report EUT View 7

Report No: SSP26030546-1E FCC ID: 2AWW4-TRA104-04 Annex of Test Report Annex D. Label and Inf ormation FCC Label Sample FCC Labe Size: 4.5cm*1.25cm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location Label Location

Report No: SSP26030546-1E FCC ID: 2AWW4-TRA104-04 Annex of Test Report Annex B. EUT Internal Photos Model: TRA104-04-TW01-11500 EUT Internal View 1 EUT Internal View 2 BT ANT Report No: SSP26030546-1E FCC ID: 2AWW4-TRA104-04 Annex of Test Report EUT Internal View 3 EUT Internal View 4 4G LTE ANT Report No: SSP26030546-1E FCC ID: 2AWW4-TRA104-04 Annex of Test Report EUT Internal View 5 EUT Internal View 6 WIFI ANT Report No: SSP26030546-1E FCC ID: 2AWW4-TRA104-04 Annex of Test Report EUT Internal View 7

FCC ID: 2AWW4-TRA104-04 RF Exposure Evaluation Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm2) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f2) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f2) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Test Result of RF Exposure Evaluation Worst Case: Mode Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result BLE 1.18 1.31 0.0005 1.0 PASS 2.4G Wi-Fi 15.37 34.43 0.0137 1.0 PASS LTE Band 2 23.15 206.54 0.0920 1.0 PASS LTE Band 4 23.01 199.99 0.0891 1.0 PASS LTE Band 5 24.28 267.92 0.0770 0.549 PASS LTE Band 12 23.65 231.74 0.0505 0.466 PASS LTE Band 13 23.65 231.74 0.0505 0.518 PASS LTE Band 66 23.15 206.54 0.0920 1.0 PASS Remark: Antenna Gain: BT antenna gain: 3dBi, Wi-Fi antenna gain: 2.4GHz ANT =3dBi, LTE Band 2: 3.5dBi, LTE Band 4: 3.5dBi, LTE Band 5: 1.6dBi, LTE Band 12: 0.4dBi, LTE Band 13: 0.4dBi, LTE Band 66: 3.5dBi So a SAR test is not required The device can transmit with 2.4G Wi-Fi, BT and LTE simultaneously. Calculations for simultaneously transmit Worst Case: Mode Ratios Result Limit Result BLE 0.0005 0.1545 1 PASS 2.4G Wi-Fi 0.0137 LTE Band 5 0.1403 Ratios = Power Density / Power density Limit

Report No: SSP26030546-1E FCC Test Report Page 1 of 31 FCC TEST REPORT FCC ID: 2AWW4-TRA104-04 Report No. : SSP26030546-1E Applicant : Sensize Limited Product Name : TR V05-01 Model Name : TRA104-04-TW01-11500 Test Standard : FCC Part 15.247 Date of Issue : 2026-05-20 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP26030546-1E FCC Test Report Page 2 of 31 Test Report Basic Information Applicant..................................: Sensize Limited Address of Applicant...............: Sensize, Future Business Centre, Kings Hedges Road,CambridgeCB4 2HY, UK, Cambridge, United Kingdom Manufacturer..........................: Sensize Limited Address of Manufacturer........: Sensize, Future Business Centre, Kings Hedges Road,CambridgeCB4 2HY, UK, Cambridge, United Kingdom Product Name.........................: TR V05-01 Brand Name.............................: - Main Model..............................: TRA104-04-TW01-11500 Series Models..........................: - Test Standard..........................: FCC Part 15 Subpart C KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.4-2014 ANSI C63.10-2020 Date of Test .............................: 2026-03-31 to 2026-05-20 Test Result...............................: PASS Tested By ................................: (Walker Wu) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP26030546-1E FCC Test Report Page 3 of 31 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................9 2. Summary of Test Results ........................................................................................................................................... 10 3. Antenna Requirement ............................................................................................................................................... 11 3.1 Standard and Limit.............................................................................................................................................. 11 3.2 Test Result .......................................................................................................................................................... 11 4. Conducted Emissions ................................................................................................................................................ 12 4.1 Standard and Limit.............................................................................................................................................. 12 4.2 Test Procedure.................................................................................................................................................... 12 4.3 Test Data and Results .......................................................................................................................................... 13 5. Radiated Emissions ................................................................................................................................................... 14 5.1 Standard and Limit.............................................................................................................................................. 14 5.2 Test Procedure.................................................................................................................................................... 14 5.3 Test Data and Results .......................................................................................................................................... 16 6. Band-edge Emissions(Radiated) ............................................................................................................................... 20 6.1 Standard and Limit.............................................................................................................................................. 20 6.2 Test Procedure.................................................................................................................................................... 20 6.3 Test Data and Results .......................................................................................................................................... 20 7. Maximum Peak Conducted Output Power ....…

Text truncated - open the document above for the full version.

Airgain Embedded Antenna Engineering Data Sheet Profile Series N03SZAAA 3611 Valley Centre Drive, Suite 150 San Diego, CA 92130 USA Tel: +1 760 579 0200 Fax: +1 760 579 0892 Information: [email protected] Sales: [email protected] Support: [email protected] Page 2 Proprietary and Confidential Doc. # 5413-02-00-001-1 Rev. 1.0 Airgain N03SZAAA Engineering Data Sheet Revision History (Required) Revision Date Note 5413-02-00-001-1 Rev 1.0 March 11, 2026 Preliminary Datasheet 1.0 Disclaimers The information in this document is provided in connection with Airgain Antenna products and is proprietary and confidential. Airgain may make changes at any time, without notice. Please verify with Airgain before finalizing a product design. Page 3 Proprietary and Confidential Doc. # 5413-02-00-001-1 Rev. 1.0 Airgain N03SZAAA Engineering Data Sheet Contents 1. Airgain N03SZAAA Embedded Antenna ....................................................................................................... 4 2. Features ............................................................................................................................................................ 4 3. Specifications and Interface ............................................................................................................................. 5 4. Radiation Patterns ............................................................................................................................................ 5 5. Dimensions ...................................................................................................................................................... 7 6. RoHS and RAEACH ....................................................................................................................................... 7 7. Feature and Options Information ..................................................................................................................... 7 7.1 Part Number Conventions ............................................................................................................................... 8 7.2 Part Number Example ..................................................................................................................................... 8 8. Cable Data Sheet ............................................................................................................................................. 9 Figures Figure 1: Model N03SZAAA Embedded Antenna ........................................................................................................... 4 Figure 2: Measurement axes for N03SZAAA in Sensize Peco Tracker device ................................................ 5 Figure 3: Airgain N03SZAAA radiation patterns in Sensize Peco Tracker device at 2.44GHz ................. 6 Figure 4: Model N03SZAAA Pre-applied Tape Dimensions ...................................................................................... 7 Figure 5: N03SZAAA with connector or stripped cable ................................................................................................ 8 Page 4 Proprietary and Confidential Doc. # 5413-02-00-001-1 Rev. 1.0 Airgain N03SZAAA Engineering Data Sheet 1. Airgain N03SZAAA Embedded Antenna The model N03SZAAA Embedded Antenna has been specifically designed to provide a high efficiency, Wi- Fi 2400-2485MHz band embedded antenna solution for the Sensize Peco tracker. 2. Features The Model N03SZAAA Embedded Antenna is defined by the following features: • IEEE 802.11b/n • Tape mount • High efficiency • Quick integration • DC Grounded Figure 1: Model N03SZAAA Embedded Antenna Page 5 Proprietary and Confidential Doc. # 5413-02-00-001-1 Rev. 1.0 Airgain N03SZAAA Engineering Data Sheet 3. Specifications and Interface Frequency range 2400-2485MHz Realized Efficiency >40% 2400-2485MHz range Peak gain <3.0 dBi in 2400-2485MHz range VSWR < 2:1 Feed impedance 50 ohms Power handling 30 dBm Interface 50 ohms, I-PEX-compatible cable connector Cable 1.13 mm diameter, micro coax cable, length 275mm Antenna dimensions 27.0 x 15.0 x 2.05 (mm) – Including tape, excluding cable Weight 2.0 g (0.07 oz) – with cable Temperature range Operating: -40° C to +75° C (-40° F to +167° F) Storage: -40° C to +85° C (-40° F to +185° F) Humidity range 0% to 95% non-condensing 4. Radiation Patterns Radiation patterns for the Airgain N03SZAAA antenna were measured with the antenna mounted in the designated position inside the Sensize Peco Tracker. Figure 2: Measurement axes for N03SZAAA in Sensize Peco Tracker device Page 6 Proprietary and Confidential Doc. # 5413-02-00-001-1 Rev. 1.0 Airgain N03SZAAA Engineering Data Sheet Front to Back (XZ) Side to Side (YZ) Azimuth (XY) Figure 3: Airgain N03SZAAA radiation patterns in Sensize Peco Tracker device at 2.44GHz Page 7 Proprietary and Confidential Doc. # 5413-02-00-001-1 Rev. 1.0 Airgain N03SZAAA Engineering Data Sheet 5. Dimensions Figure 4: Model N03SZAAA Pre-applied Tape Dimensions 6. RoHS and RAEACH Airgain N03SZAAA embedded antennas are RoHS and RAEACH compliant. 7. Feature and Options Information Airgain N03SZAAA antennas are equipped with an RF cable I/O interface. Optional cable termination such as U.FL-compatible micro coax connectors and cable mounted EMI ferrite cores are available. To aid mounting the N03SZAAA, pre-applied, double-sided adhesive tape is available on the N03SZAAA -T Series. Page 8 Proprietary and Confidential Doc. # 5413-02-00-001-1 Rev. 1.0 Airgain N03SZAAA Engineering Data Sheet 7.1 Part Number Conventions Airgain uses a three-staged standard number system for our part numbers, which serially define the antenna type, tape type, cable type/length, and connector type/interface, as described below: Antenna # Tape type -xx (if required) Packaging type -xx Cable Assembly Type –xxxxxx Cable Color –x Cable length xxx Connector type xx (if required) N03SZAAA Blank = No Tape T = Tape on bottom of element T2M62 = 3M 5962 ,Blac…

Text truncated - open the document above for the full version.

Report No: SSP26030546-2E FCC Test Report Page 1 of 48 FCC TEST REPORT FCC ID: 2AWW4-TRA104-04 Report No. : SSP26030546-2E Applicant : Sensize Limited Product Name : TR V05-01 Model Name : TRA104-04-TW01-11500 Test Standard : FCC Part 15.247 Date of Issue : 2026-05-20 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP26030546-2E FCC Test Report Page 2 of 48 Test Report Basic Information Applicant..................................: Sensize Limited Address of Applicant...............: Sensize, Future Business Centre, Kings Hedges Road,CambridgeCB4 2HY, UK, Cambridge, United Kingdom Manufacturer..........................: Sensize Limited Address of Manufacturer........: Sensize, Future Business Centre, Kings Hedges Road,CambridgeCB4 2HY, UK, Cambridge, United Kingdom Product Name.........................: TR V05-01 Brand Name.............................: - Main Model..............................: TRA104-04-TW01-11500 Series Models..........................: - Test Standard..........................: FCC Part 15 Subpart C KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.4-2014 ANSI C63.10-2020 Date of Test .............................: 2026-03-31 to 2026-05-20 Test Result...............................: PASS Tested By ................................: (Walker Wu) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this …

Text truncated - open the document above for the full version.