2AWYK-X8Tattoo stencil printer

X8 设计部 2025.9.8 技术要求 更改修改认证 120克双胶纸W-400 * H-1030mm 单黑双面印风琴折页 Bailey ORGBRO USER’S GUIDE Tattoo stencil printer BENUTZERHANDBUCH TATTOO-SCHABLONENDRUCKER GUIDE DE L'UTILISATEUR IMPRIMANTE À POCHOIRS DE TATOUAGE GUIDA UTENTE STAMPANTE PER STENCIL TATUAGGI X8 INNOVATION, SCIENCE AND ECONOMIC DEVELOPMENT CANADA NOTICE: PMN: Tattoo stencil printer HVIN: X8 This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Le présentappareilestconforme aux CNR Innovation, Sciences et Développement économique Canada Canadaapplicables aux appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement. le dispositif a été évalué à satisfaire l'exigence générale de l'exposition aux rf. l'appareil peut être utilisé dans des conditions d'exposition portatif sans restriction. FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF WARNING STATEMENT: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. ENGLISH 1234 567 DEUTSCH FRANÇAIS ITALIANO ORGBRO 1. Download the "Tattoo Go" APP. Method 1: Scan the QR code with your phone to install the app. Method 2: Search for "Tattoo Go" on your phone's app store to download the app. Tattoo Go 4. Open the "Tattoo Go" APP and tap "Disconnect" in the upper-right corner. 5. Select your device from the list that appears. 3. Turn on Bluetooth on your phone. 2. Press and hold to power on. X8 Disconnect 6. After setting the size of the tattoo paper, you can edit and print. 1. Connect the printer to the computer via a USB cable. 1 2 4 3 5 6 7 If the product has quality problems or any suggestions, please contact us promptly through the after-sales service e-mail, we will give you a satisfactory answer. [email protected] Return and exchange instructions: Returns and exchanges please ensure that the goods are intact and do not affect the sale; we will provide you with service as soon as possible after receiving the request. Scan code to register - Free 6 months warranty! WARRANTY CARD Instagramorgbro_printer FacebookORGBROPrinter YouTube@ORGBRO_Printer Xorgbro_printer WhatsApp+86 13246387664 Follow our official social media to unlock exclusive perks! EVATOST CONSULTING LTD Office 101 32 Threadneedle Street, London, United Kingdom, EC2R 8AY [email protected] ORGBRO USER’S GUIDE Tattoo stencil printer BENUTZERHANDBUCH TATTOO-SCHABLONENDRUCKER GUIDE DE L'UTILISATEUR IMPRIMANTE À POCHOIRS DE TATOUAGE GUIDA UTENTE STAMPANTE PER STENCIL TATUAGGI X8 General Description 01 Print Head Sensor Rubber Roller Paper Outlet Cover Power Button Paper Input LED Indicator Open-cover Button Reset Key Charging Port Low power/ Overheat Charging while powered off Out of paper/ Cover is open StandbyGreen Green Red Red Steady Steady Blinking Blinking Indicator Light StatusDescription Power Button Double-press.Print the self-test page. Press and hold for 2s. Power on/off. Reset Key ButtonFunction Operating Instruction Perform a forced shutdown if it's behaving abnormally. Insert a pin into the reset hole and press once. Yellow Paper Blue Transfer Paper Protective Paper White Tracing Paper The printing quality will be affected by the quality of the tattoo transfer paper. It is recommended to use high-quality or official brand tattoo transfer paper. NOTE ! Tattoo Paper Description 02 Remove the protective paper. 01 Paper Installation Guide 03 03 If the paper does not feed automatically, don't worry. Just carefully follow these steps to manually feed the paper. Overlay sensor 02 Turn on the printer. 02 Close the cover and turn on the printer. 03 Place the yellow paper facing up into the paper input. 01 Place the yellow paper facing up and flat inside the printer. Press the Open-Cover Button to open the cover. 01 03 Place it onto your skin and press it for at least 40 seconds. 02 Cut out the pattern on the white tracing paper. X8 Note: To remove the t…

Text truncated - open the document above for the full version.

ZhuhaiXprinterElectronicsTechnologyCo.,Ltd. ReferenceNo.2025U0064 2.911(d)(7)USAAgentv1.3 Section2.911(d)(7)USAAgentforServiceofProcess Companyname:ZhuhaiXprinterElectronicsTechnologyCo.,Ltd. ProductDescription:Tattoostencilprinter,Thermalprinter,Labelprinter,Thermal labelprinter,PocketThermalPrinter,ErrorPrinter,HouseholdLabelPrinter,Portable ThermalLabelPrinter,PortableThermalPrinter,PriceLabelPrinter,Ink-freePrinter, PhotoPrinter,PicturePrinter,PortablePrinter,A4Printer,InklessPrinter,Mobile Printer,ThermalTransferPrinter,WrongQuestionPrinter,HomeLabelPrinter,Price CodeLabelPrinter,LearningPrinter,SearchQuestionPrinter,PhotoPrinter,Image Printer,A4ThermalPrinter,A4ThermalTransferPrinter,A4PortablePrinter, HomeworkPrinter,A4DesktopPrinter,A4SmartPrinter,A4InklessPrinter,Tattoo StencilPrinter,TattooPrinter,StencilPrinter,TemporaryTattooPrinter,TattooPrinter Machine,TattooTransferPrinter,PortableTattooTransferMachine,LabelMaker, LabelMakerMachine,BluetoothLabelPrinter,MiniLabelMaker,SmallLabelPrinter, ReceiptPrinter,StickerPrinter,MiniPrinter,StickerMaker,StickerMakerMachine, MiniStickerPrinter,PortablePrinter,BluetoothPrinter,InklessPrinter,Wireless Printer,TattooMachine,WirelessTattooMachine,InstantPrintCamera FCCID:2AWYK-X8 ContactName:XinqiangWang Address:5/F,1stWorkshop,No.613HuaweiRoad,QianshanIndustrialZone, XiangzhouDistrict,ZhuhaiCity,GuangdongProvince,P.R.China TelephoneNo:0756-3895769 Email:[email protected] 2.911(d)(7)USADesignatedAgentforServiceofProcess We,[ZhuhaiXprinterElectronicsTechnologyCo.,Ltd.](“theapplicant”)designate [TTSMARKETINC.] NOTE1 forthepurposeofacceptingserviceofprocessonbehalfof theapplicant. Applicantconsent:WeAcknowledgeourconsenttoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipment,andatthephysicalU.S. addressandemailaddressofthedesignatedagentandacknowledgeour acceptanceofourobligationtomaintainanagentforserviceofprocessintheUnited Statesfornolessthanoneyearaftereitherthegranteehaspermanentlyterminated allmarketingandimportationoftheapplicableequipmentwithintheU.S.,orthe conclusionofanyCommission-relatedadministrativeorjudicialproceedinginvolving theequipment,whicheverislater. Agentobligation:WeAcknowledgeourobligationtoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipmentatourphysicalU.S. addressandemailaddressfornolessthanoneyearaftereitherthegranteehas permanentlyterminatedallmarketingandimportationoftheapplicableequipment ZhuhaiXprinterElectronicsTechnologyCo.,Ltd. ReferenceNo.2025U0064 2.911(d)(7)USAAgentv1.3 withintheU.S.,ortheconclusionofanyCommission-relatedadministrativeorjudicial proceedinginvolvingtheequipment,whicheverislater. USAAgent Companyname:TTSMARKETINC. Address:1178BroadwaySte324,NewYork, NY10001,USA FCCRegistrationNumber(FRN): 0036806057 ContactName:MaverickLim TelephoneNo:001-(646)305-2908 Email:[email protected] Applicant Companyname:ZhuhaiXprinter ElectronicsTechnologyCo.,Ltd. Address:5/F,1stWorkshop,No.613 HuaweiRoad,QianshanIndustrialZone, XiangzhouDistrict,ZhuhaiCity, GuangdongProvince,P.R.China FRN:0029777570 FCCGranteeCode:2AWYK ContactName:XinqiangWang TelephoneNo:0756-3895769 Email:[email protected] Signature: Title:Manager Signature: Title:Manager Date:2025.09.12Date:2025.09.12 NOTE1:AnapplicantlocatedintheUnitedStatesmaydesignateitselfastheagentforservice ofprocess. Reference;FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Zhuhai Xprinter Electronics Technology Co., Ltd. Grantee code: 2AWYK FCC ID: 2AWYK-X8 FRN: 0029777570 Contact Name: Xinqiang Wang Address: 5/F, 1st Workshop, No.613 Huawei Road, Qianshan Industrial Zone, Xiangzhou District, Zhuhai City, Guangdong Province, P.R.China Fax No:0756-3977067 Email: [email protected] i. [Zhuhai Xprinter Electronics Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Zhuhai Xprinter Electronics Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Zhuhai Xprinter Electronics Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment . Date: 2025/09/05 Applicant’s Name: Xinqiang Wang Title: Manager Signature The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Zhuhai Xprinter Electronics Technology Co., Ltd. Code 00018768 Ed. 1 Device Thermal printer, Label printer, Thermal label printer, Pocket Thermal Printer, Error Printer, Household Label Printer, Portable Thermal Label Printer, Portable Thermal Printer, Price Label Printer, Ink-free Printer, Photo Printer, Picture Printer, Portable Printer, A4 Printer, Inkless Printer, Mobile Printer, Thermal Transfer Printer, Wrong Question Printer, Home Label Printer, Price Code Label Printer, Learning Printer, Search Question Printer, Photo Printer, Image Printer, A4 Thermal Printer, A4 Thermal Transfer Printer, A4 Portable Printer, Homework Printer, A4 Desktop Printer, A4 Smart Printer, A4 Inkless Printer, Tattoo Stencil Printer, Tattoo Printer, Stencil Printer, Temporary Tattoo Printer, Tattoo Printer Machine, Tattoo Transfer Printer, Portable Tattoo Transfer Machine, Label Maker, Label Maker Machine, Bluetooth Label Printer, Mini Label Maker, Small Label Printer, Receipt Printer, Sticker Printer, Mini Printer, Sticker Maker, Sticker Maker Machine , Mini Sticker Printer , Portable Printer, Bluetooth Printer, Inkless Printer , Wireless Printer, Tattoo Machine, Wireless Tattoo Machine, Instant Print Camera Company name Zhuhai Xprinter Electronics Technology Co., Ltd. Grantee code 2AWYK FCC ID 2AWYK-X8 FRN 0029777570 Contact name Xinqiang Wang Address 5/F，1st Workshop，No.613 Huawei Road， Qianshan Industrial Zone，Xiangzhou District， Zhuhai City，Guangdong Province，P.R.China Telephone number 0756-3895769 [email protected] Chipset/module information AC7916AB Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 Item 1. The device is able to install software/program installation? ☐Yes, go to Item 2. ☒No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A 3 # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher N/A 3 RAM: 1 GB N/A 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or N/A 4 later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐Yes, go to Item 3. ☒No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: Xinqiang Wang Date: 2025/09/05 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications.

Zhuhai Xprinter Electronics Technology Co., Ltd. Product Similarity Declaration Product name: Tattoo stencil printer, Thermal printer, Label printer, Thermal label printer, Pocket Thermal Printer, Error Printer, Household Label Printer, Portable Thermal Label Printer, Portable Thermal Printer, Price Label Printer, Ink-free Printer, Photo Printer, Picture Printer, Portable Printer, A4 Printer, Inkless Printer, Mobile Printer, Thermal Transfer Printer, Wrong Question Printer, Home Label Printer, Price Code Label Printer, Learning Printer, Search Question Printer, Photo Printer, Image Printer, A4 Thermal Printer, A4 Thermal Transfer Printer, A4 Portable Printer, Homework Printer, A4 Desktop Printer, A4 Smart Printer, A4 Inkless Printer, Tattoo Stencil Printer, Tattoo Printer, Stencil Printer, Temporary Tattoo Printer, Tattoo Printer Machine, Tattoo Transfer Printer, Portable Tattoo Transfer Machine, Label Maker, Label Maker Machine, Bluetooth Label Printer, Mini Label Maker, Small Label Printer, Receipt Printer, Sticker Printer, Mini Printer, Sticker Maker, Sticker Maker Machine , Mini Sticker Printer , Portable Printer, Bluetooth Printer, Inkless Printer , Wireless Printer, Tattoo Machine, Wireless Tattoo Machine, Instant Print Camera Model: X8,S008 We (Zhuhai Xprinter Electronics Technology Co., Ltd.) hereby state that all the models are electrically identical, including the same software parameters and hardware designs (such as circuit design, PCB layout, RF module/circuit, antenna type and antenna position, components on the PCB, etc.), the same mechanical structure and design (including product casing, materials, etc). The difference is merely the difference in model. Note: 1.All models can use all product names, 2.all models can be equipped with Battery 1 or Battery 2, FCC ID:2AWYK-X8 Zhuhai Xprinter Electronics Technology Co., Ltd. Battery differences： Battery 1 Battery 2 This Tattoo stencil printer has two batteries. Battery 1 has a capacity of 2000mAh and Battery 2 has a capacity of 1500mAh. The only difference between them is the capacity, and the input specification parameters are the same as those of the manufacturer, so it does not affect the radio frequency function. Signature: Name: Xinqiang Wang Title: Manager Place, date In China, 2025.8.30

TCB CALL página 1 FileFCCID:2AWYK-X8 PleaseuploadanexhibitthatexplainshowdoestheTCBverifythenewagentinformation: 1-IstheaddressoftheagentavalidphysicalUSmailingaddress(notaUSpostofficebox,notavirtualmailbox,notP.O.Boxes,notavacantlot,notapublicbuilding, etc.) ○Wehavecheckediftheaddressexistsinarealandpotentialbuilding(Googlemaps)+officialUSregister,afterthisverificationandtheevidencebelowwecan guaranteethefollowing: notaUSpostofficebox notavirtualmailbox notP.O.Boxes notavacantlot notapublicbuilding(note) ►We checked the FCC FRN Search based on the information provided by the grantee. On the official register from :https://apps.dos.ny.gov/publicInquiry/EntityDisplay Google: TCB CALL página 2 State of New York department of State: TCB CALL página 3 TCB CALL página 4 ►CONCLUSIONbyTCB:TheASOPdefinedandprovidedbygranteeisVALIDandconfirmed.Thereforetheexhibit"C5266091_X23_Ed1_US_Agent_Letter" includedinthefileisok. 2-IstheagentphysicallylocatedatthatvalidUSaddresssuchthattheagentcanbelegallyservedatthataddress? Yes,checkabove 3-Hasthelistedagentclearlyagreedinwritingtoserveastheagentforthegranteeatthataddress? Yes,itisincludedintheexhibit"C5266091_X23_Ed1_US_Agent_Letter"

C5266091_X10_Ed.2 1/1 < Zhuhai Xprinter Electronics Technology Co., Ltd.> Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2025.09.05 Subject: Request for Confidentiality FCC ID: 2AWYK-X8 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Xinqiang Wang Title: Manager

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Zhuhai Xprinter Electronics Technology Co., Ltd. Address: 5/F，1st Workshop，No.613 Huawei Road，Qianshan Industrial Zone， Xiangzhou District，Zhuhai City，Guangdong Province，P.R.China Product Name: Tattoo stencil printer, Thermal printer, Label printer, Thermal label printer, Pocket Thermal Printer, Error Printer, Household Label Printer, Portable Thermal Label Printer, Portable Thermal Printer, Price Label Printer, Ink-free Printer, Photo Printer, Picture Printer, Portable Printer, A4 Printer, Inkless Printer, Mobile Printer, Thermal Transfer Printer, Wrong Question Printer, Home Label Printer, Price Code Label Printer, Learning Printer, Search Question Printer, Photo Printer, Image Printer, A4 Thermal Printer, A4 Thermal Transfer Printer, A4 Portable Printer, Homework Printer, A4 Desktop Printer, A4 Smart Printer, A4 Inkless Printer, Tattoo Stencil Printer, Tattoo Printer, Stencil Printer, Temporary Tattoo Printer, Tattoo Printer Machine, Tattoo Transfer Printer, Portable Tattoo Transfer Machine, Label Maker, Label Maker Machine, Bluetooth Label Printer, Mini Label Maker, Small Label Printer, Receipt Printer, Sticker Printer, Mini Printer, Sticker Maker, Sticker Maker Machine , Mini Sticker Printer , Portable Printer, Bluetooth Printer, Inkless Printer , Wireless Printer, Tattoo Machine, Wireless Tattoo Machine, Instant Print Camera Model Number: X8, S008 FCC Identifier: 2AWYK-X8 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Xinqiang Wang Date: 2025.09.05 Title: Manager Signature of applicant: Zhuhai Xprinter Electronics Technology Co., Ltd.

Page 1 of 4 FCC ID: 2AWYK-X8 External Photos Page 2 of 4 Page 3 of 4 Page 4 of 4

Label (Length * Width:138*38mm)

Page 1 of 6 FCC ID: 2AWYK-X8 Internal Photos Page 2 of 6 Page 3 of 6 Page 4 of 6 ANT Page 5 of 6 Battery 1 Page 6 of 6 Battery 2 ANT

Page 1 of 7 Address:No.11,Wu Song Road, Tel: 86-769-22607797 Dongcheng District Dongguan, Fax: 86-769-22607907 Guangdong Province, 523117, People’s Republic of China http://www.cpcteam.com TEST REPORT Report Number. ....................... : 90807-25-72-25-PP003 Date of issue ............................ : 2025-09-22 Prepared by (+signature)........ : Pale Approved by (+signature) ...... : Jason Testing Laboratory name ....... : SLG-CPC Testlaboratory Co., Ltd. Address .................................... : No. 11, Wu Song Road, Dongcheng District Dongguan, Guangdong Province, 523117, People’s Republic of China Applicant’s name .................... : Zhuhai Xprinter Electronics Technology Co., Ltd. Address .................................... : 5/F, 1st Workshop, No.613 Huawei Road, Qianshan Industrial Zone, Xiangzhou District, Zhuhai City, Guangdong Province, P.R.China Manufacturer’s name ............ : Same as applicant Address .................................... : Same as applicant Factory’s name ...................... : Same as applicant Address .................................... : Same as applicant Standard(s) .............................. : §15.247(i), §2.1093 Test item description .............. : Please refer to page 4 Trade Mark ............................... : ORGBRO Model/Type reference ............. : X8, S008 FCC ID ...................................... : 2AWYK-X8 Date of receipt of test item ..... : 2025-08-19 Date (s) of performance of test: 2025-08-20 to 2025-09-01 Summary of Test Results ....... : Pass The Summary of Test Results based on a technical opinion belongs to the standard(s). General disclaimer: This report shall not be reproduced except in full, without the written approval of SLG-CPC Testlaboratory Co., Ltd. The test results in the report only apply to the tested sample. 90807-25-72-25-PP003 Page 2 of 7 Address:No.11,Wu Song Road, Tel: 86-769-22607797 Dongcheng District Dongguan, Fax: 86-769-22607907 Guangdong Province, 523117, People’s Republic of China http://www.cpcteam.com Table of Contents 1. EUT SPECIFICATION ................................................................................................................................. 4 2. TEST REQUIREMENT: ............................................................................................................................... 5 3. MEASUREMENT RESULT ......................................................................................................................... 6 90807-25-72-25-PP003 Page 3 of 7 Address:No.11,Wu Song Road, Tel: 86-769-22607797 Dongcheng District Dongguan, Fax: 86-769-22607907 Guangdong Province, 523117, People’s Republic of China http://www.cpcteam.com Modified History Report No. Revision Date Summary 90807-25-72-25-PP003 2025-09-22 Original Report 90807-25-72-25-PP003 Page 4 of 7 Address:No.11,Wu Song Road, Tel: 86-769-22607797 Dongcheng District Dongguan, Fax: 86-769-22607907 Guangdong Province, 523117, People’s Republic of China http://www.cpcteam.com 1. EUT Specification Characteristics Description Product: Tattoo stencil printer, Thermal printer, Label printer, Thermal label printer, Pocket Thermal Printer, Error Printer, Household Label Printer, Portable Thermal Label Printer, Portable Thermal Printer, Price Label Printer, Ink-free Printer, Photo Printer, Picture Printer, Portable Printer, A4 Printer, Inkless Printer, Mobile Printer, Thermal Transfer Printer, Wrong Question Printer, Home Label Printer, Price Code Label Printer, Learning Printer, Search Question Printer, Photo Printer, Image Printer, A4 Thermal Printer, A4 Thermal Transfer Printer, A4 Portable Printer, Homework Printer, A4 Desktop Printer, A4 Smart Printer, A4 Inkless Printer, Tattoo Stencil Printer, Tattoo Printer, Stencil Printer, Temporary Tattoo Printer, Tattoo Printer Machine, Tattoo Transfer Printer, Portable Tattoo Transfer Machine, Label Maker, Label Maker Machine, Bluetooth Label Printer, Mini Label Maker, Small Label Printer, Receipt Printer, Sticker Printer, Mini Printer, Sticker Maker, Sticker Maker Machine , Mini Sticker Printer , Portable Printer, Bluetooth Printer, Inkless Printer , Wireless Printer, Tattoo Machine, Wireless Tattoo Machine, Instant Print Camera Model Number: X8,S008(Note: All the models are exactly the same. The only difference lies in the product model. Model "X8" is the main test model. For this test, the battery capacity used for installation is: 2000mAh)( Battery 1 has a capacity of 2000mAh and Battery 2 has a capacity of 1500mAh. The only difference between them is the capacity, and the input specification parameters are the same as those of the manufacturer, so it does not affect the radio frequency function.) Sample: 1# Device Type: Bluetooth V5.3 Data Rate: DSS: 1Mbps for GFSK modulation DTS: 1Mbps for GFSK modulation Modulation: DSS: GFSK DTS: GFSK(1M) Operating Frequency Range(s) : 2402-2480MHz Number of Channels: DSS: 79 channels DTS: 40 channels Transmit Power Max: DSS: -0.33 dBm GFSK DTS: -0.66 dBm Antenna Gain: 3.54 dBi Power supply: / Evaluation applied: MPE Evaluation SAR Evaluation 90807-25-72-25-PP003 Page 5 of 7 Address:No.11,Wu Song Road, Tel: 86-769-22607797 Dongcheng District Dongguan, Fax: 86-769-22607907 Gua…

Text truncated - open the document above for the full version.