2AWYK-680Bluetooth Key

举 范 C B R o H s ( E: � 回 22 0-J 1181 7 FCC ID: 2AWYK-680 FCC warning: Any Changes or modif1cations not exp『esslyapproved by the party 『esponsiblefor compliance could void the user's authority to operate the equipment. Note: This device complies with Part 15 of the FCC Rules. Ope『ationis subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesi『ed operation These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency ene『gy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, the『e is no gua『anteethat interference will not occur in a particular installation. If this equipment does cause ha『mfulinterference to radio or television 『eception,which can be determined by turning the equipment off and on, the user is encouraged to try to co『rect the interference by one or more of the following measu『es: -Reorient o『relocatethe receiving antenna -Increase the separation between the equipment and receiver -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. INNOVATION, SCIENCE AND ECONOMIC DEVELOPMENT CANADA NOTICE: IC: 34491-680 PMN: XP-680 HVIN: XP-680b This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s) Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the d evice The device has been evaluated to meet gene『al RF exposure requirement The device can be used in portable exposure condition without restriction. Le presentappareilestconforme aux CNR d)lvis sur l'innovation,la science etle developpement economique applicables aux appa『eils radio exempts de licence. �exploitationestautorisee aux deux conditions suivantes: (1) l'appareil ne doit pas p『oduirede brouillage, et (2) l'utilisateu『de l'appareildoit accepter tout b『ouillageradioelect『iquesu­ bi, memesi le b『ouillageestsusceptible d'encompromettre le fonctionnement. le dispositif a ete evalue a satisfaire l'exigence generale de l'exposit1on aux rf. l'appareil peut积reutilise dans des conditions d'exposition portatif sans restriction ORGBRO Bluetooth Key Usage Instructions: 1. P lug the Bluetooth key receiver into your computer's USB port. Bluetooth Key Indicator Light Guide Not connected: Blue light blinking Connected: Blue light steady on. 2.Double-press the paper feed button; two beeps will indicate successful Bluetooth key-printer pai「ing. 三

甘 届 范 C B R o H S ( € � 回 20- J11 817 FCC ID: 2AWYK-680 FCC warning: Any Changes or modifications not expressly approved by the party responsible fo『 compliancecould void the user's autho『ityto operate the equipment. Note: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful inte『ference,and (2) this device must accept any inte『ference『eceived,including interference that may cause undesired operation These limits are designed to provide reasonable protection against harmful inte『ferencein a residential installation. This equipment gene『atesuses and can radiate radio frequency energy and, if not installed and used in accordance with the inst『uctions,may cause harmful inte『ferenceto radio communications. However, there is no guarantee that interference will not occur in a pa厂ticularinstallation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to cor『ectthe interference by one or mo『e of the following measures: -Reo『ientor relocate the receiving antenna -Increase the separation between the equipment and 『eceiver -Connect the equipment into an outlet on a circuit different from that to which the 『eceiveris connected. -Consult the dealer or an experienced radio/TV technician for help The device has been evaluated to meet general RF exposure 「equi「ement. The device can be used ,n portable exposu「e condition without restriction INNOVATION, SCIENCE AND ECONOMIC DEVELOPMENT CANADA NOTICE: IC : 34491-680 PMN. XP-680 HVIN: XP-680a This device complies with Innovation, Science and Economic De velopment Canada licence-exempt RSS standard(s) Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any in terference, including interference that may cause undesired operation of the device The device has been evaluated to meet gene『al RF exposure requirement The device can be used in portable exposure condition without restriction. Le presentappareilestconforme aux CNR d)lvis sur l'innovation,la science etle developpement economique applicables aux appa『eils radio exempts de licence. �exploitationestautorisee aux deux conditions suivantes: (1) l'appareil ne doit pas p『oduirede brouillage, et (2) l'utilisateu『de l'appareildoit accepter tout b『ouillageradioelect『iquesu­ bi, memesi le b『ouillageestsusceptible d'encompromettre le fonctionnement. le dispositif a ete evalue a satisfaire l'exigence generale de l'exposit1on aux rf. l'appareil peut积reutilise dans des conditions d'exposition portatif sans restriction ORGSTA Bluetooth Key Usage Instructions: 1. P lug the Bluetooth key receiver into your computer's USB port. Bluetooth Key Indicator Light Guide Not connected: Blue light blinking Connected: Blue light steady on. 2.Double-press the paper feed button; two beeps will indicate successful Bluetooth key-printer pai「ing. 三

ZhuhaiXprinterElectronicsTechnologyCo.,Ltd. ReferenceNo.2026UL0225 2.911(d)(7)USAAgentv1.3 Section2.911(d)(7)USAAgentforServiceofProcess Companyname:ZhuhaiXprinterElectronicsTechnologyCo.,Ltd. FCCID:2AWYK-680 ContactName:XinqiangWang Address:5/F,1stWorkshop,No.613HuaweiRoad,QianshanIndustrialZone, XiangzhouDistrict,ZhuhaiCity,GuangdongProvince,P.R.China TelephoneNo:0756-3895769 Email:[email protected] 2.911(d)(7)USADesignatedAgentforServiceofProcess We,[ZhuhaiXprinterElectronicsTechnologyCo.,Ltd.](“theapplicant”)designate [TTSMARKETINC.] NOTE1 forthepurposeofacceptingserviceofprocessonbehalfof theapplicant. Applicantconsent:WeAcknowledgeourconsenttoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipment,andatthephysicalU.S. addressandemailaddressofthedesignatedagentandacknowledgeour acceptanceofourobligationtomaintainanagentforserviceofprocessintheUnited Statesfornolessthanoneyearaftereitherthegranteehaspermanentlyterminated allmarketingandimportationoftheapplicableequipmentwithintheU.S.,orthe conclusionofanyCommission-relatedadministrativeorjudicialproceedinginvolving theequipment,whicheverislater. Agentobligation:WeAcknowledgeourobligationtoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipmentatourphysicalU.S. addressandemailaddressfornolessthanoneyearaftereitherthegranteehas permanentlyterminatedallmarketingandimportationoftheapplicableequipment withintheU.S.,ortheconclusionofanyCommission-relatedadministrativeorjudicial proceedinginvolvingtheequipment,whicheverislater. USAAgent Companyname:TTSMARKETINC. Address:1178BroadwaySte324,NewYork, NY10001,USA FRN:0036806057 ContactName:MaverickLim TelephoneNo: ： 001-(646)305-2908 Email:[email protected] Applicant Companyname:ZhuhaiXprinter ElectronicsTechnologyCo.,Ltd. Address:5/F,1stWorkshop,No.613 HuaweiRoad,QianshanIndustrialZone, XiangzhouDistrict,ZhuhaiCity, GuangdongProvince,P.R.China FCCRegistrationNumber(FRN): 0029777570 ZhuhaiXprinterElectronicsTechnologyCo.,Ltd. ReferenceNo.2026UL0225 2.911(d)(7)USAAgentv1.3 FCCGranteeCode:2AWYK ContactName:XinqiangWang TelephoneNo:0756-3895769 Email:[email protected] Signature: Title:Manager Signature: Title:Manager Date:2026.07.29Date:2026.07.29 NOTE1:AnapplicantlocatedintheUnitedStatesmaydesignateitselfastheagentforservice ofprocess. Reference;FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Zhuhai Xprinter Electronics Technology Co., Ltd. Grantee code: 2AWYK FCC ID: 2AWYK-680 FRN: 0029777570 Contact Name: Xinqiang Wang Address: 5/F, 1st Workshop, No.613 Huawei Road, Qianshan Industrial Zone, Xiangzhou District, Zhuhai City, Guangdong Province, P.R.China Fax No:0756-3977067 Email: [email protected] i. [Zhuhai Xprinter Electronics Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Zhuhai Xprinter Electronics Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Zhuhai Xprinter Electronics Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment . Date: 2026/07/28 Applicant’s Name: Xinqiang Wang Title: Manager Signature The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Zhuhai Xprinter Electronics Technology Co., Ltd. Code 00018768 Ed. 1 Device Bluetooth Key Company name Zhuhai Xprinter Electronics Technology Co., Ltd. Grantee code 2AWYK FCC ID 2AWYK-680 FRN 0029777570 Contact name Xinqiang Wang Address 5/F, 1st Workshop, No.613 Huawei Road, Qianshan Industrial Zone, Xiangzhou District, Zhuhai City, Guangdong Province, P.R.China Telephone number 0756-3895769 [email protected] Chipset/module information BR8051A01 Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 Item 1. The device is able to install software/program installation? ☐Yes, go to Item 2. ☒No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (P846 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A 3 # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher N/A 3 RAM: 1 GB N/A 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or N/A 4 later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐Yes, go to Item 3. ☒No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: Xinqiang Wang Date: 2026/07/28 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications.

TCB CALL página 1 File FCC ID: 2AWYK-680 Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. On the official register from : https://apps.dos.ny.gov/publicInquiry/EntityDisplay Google: TCB CALL página 2 State of New York department of State: TCB CALL página 3 TCB CALL página 4 TCB CALL página 5 TCB CALL página 6 ►CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed1_US_Agent_Letter" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "C5266091_X23_Ed1_US_Agent_Letter"

C5266091_X10_Ed.2 1/1 < Zhuhai Xprinter Electronics Technology Co., Ltd.> Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2026.07.28 Subject: Request for Confidentiality FCC ID: 2AWYK-680 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Xinqiang Wang Title: Manager

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Zhuhai Xprinter Electronics Technology Co., Ltd. Address: 5/F, 1st Workshop, No.613 Huawei Road, Qianshan Industrial Zone, Xiangzhou District, Zhuhai City, Guangdong Province, P.R.China Product Name: Bluetooth Key Model Number: XP-680 FCC Identifier: 2AWYK-680 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Xinqiang Wang Date: 2026.07.28 Title: Manager Signature of applicant:

Page 1 of 3 FCC ID: 2AWYK-680 External Photos Page 2 of 3 Page 3 of 3

Due to the special appearance requirement of the EUT, the label is reflected in the user manual and Packaging. User Manual Label location Label *(Length * width:75mm*29mm) Label *(Length * width:75mm*29mm) Device packaging Device packaging HVIN:XP-680a HVIN:XP-680b Label *(Length * width:75mm*29mm) Label *(Length * width:75mm*29mm)

Page 1 of 2 FCC ID: 2AWYK-680 Internal Photos Antenna Page 2 of 2

FCC ID:2AWYK-680 FCC RF Exposure Evaluation According to KDB 447498 D01 General RF Exposure Guidance v06 and part 2.1093，Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Here, FCC Exposure Evaluation Mode Channel Freq. (MHz) peak conducted output power (dBm) E.I.R.P (dBm) Max conducted output power tune-up power (dBm) Calculation Result Limits (mW) BR: GFSK 2402 -3.75 -5.80 -2.75 0.164557 <3 2441 -1.52 -3.57 -0.52 0.277213 <3 2480 -1.27 -3.32 -0.27 0.295976 <3 BR: Π/4-DQPSK 2402 -3.89 -5.94 -2.89 0.159337 <3 2441 -1.52 -3.57 -0.52 0.277213 <3 2480 -1.28 -3.33 -0.28 0.295295 <3 BLE: GFSK(1M) 2402 -3.4 -5.45 -2.40 0.178368 <3 2440 -1.01 -3.06 -0.01 0.311691 <3 2480 -1.28 -3.33 -0.28 0.295295 <3 So a SAR test is not required

ShenzhenBKCTestingCo.,Ltd.ReportNo.:BKC26074012GE-1 TestReportTel:4000-875-3820755-84829082Web:Http://www.bkc-lab.comPage1of46 TESTREPORT Applicant:ZhuhaiXprinterElectronicsTechnologyCo.,Ltd. Address: 5/F,1stWorkshop,No.613HuaweiRoad,QianshanIndustrialZone, XiangzhouDistrict,ZhuhaiCity,GuangdongProvince,P.R.China Manufacturer:ZhuhaiXprinterElectronicsTechnologyCo.,Ltd. Address: 5/F,1stWorkshop,No.613HuaweiRoad,QianshanIndustrialZone, XiangzhouDistrict,ZhuhaiCity,GuangdongProvince,P.R.China Factory:ZhuhaiXprinterElectronicsTechnologyCo.,Ltd. Address: 5/F,1stWorkshop,No.613HuaweiRoad,QianshanIndustrialZone, XiangzhouDistrict,ZhuhaiCity,GuangdongProvince,P.R.China ProductName:BluetoothKey ModelNumber:XP-680 Trademark:ORGBRO,ORGSTA FCCID:2AWYK-680 TestDate: Jun.30,2025-Aug.10,2026 DateofReport: Aug.10,2026 TestResult: ThisdevicedescribedabovehasbeentestedbyBKC,andthetest resultsshowthattheequipmentundertest(EUT)isincompliance withtheFCCCFRTitle47Part15SubpartCSection15.247 requirements.Anditisapplicableonlytothetestedsampleidentified inthereport. TestProcedureUsed: Standards:FCCCFRTitle47Part15SubpartCSection15.247 ANSIC63.10-2020+Cor1-2023+C63.10a-2024+Erratato C63.10a-2024 Preparedby(TestEngineer): StenHuang Approved(Manager): CaseyWang Approved(Manager): JerryLiao ShenzhenBKCTestingCo.,Ltd.ReportNo.:BKC26074012GE-1 TestReportTel:4000-875-3820755-84829082Web:Http://www.bkc-lab.comPage2of46 TABLEOFCONTENT 1.GeneralInformation......................................................................................5 1.1.DescriptionofDevice(EUT).......................................................................................................................5 1.2.ChannelList..................................................................................................................................................6 1.3.Summaryoftestresult................................................................................................................................6 1.4.SpecialAccessoriesandAuxiliaryEquipment........................................................................................7 1.5.Testmode......................................................................................................................................................7 1.6.BlockDiagram...............................................................................................................................................7 1.7.TestConditions.............................................................................................................................................8 1.8.MeasurementUncertainty(95%confidencelevels,k=2)......................................................................8 1.9.TestFacility....................................................................................................................................................8 1.10.TestEquipment...........................................................................................................................................9 2.Conductedemissionatthemainsterminalstest....................................11 2.1.Limit..............................................................................................................................................................11 2.2.TestSetup....................................................................................................................................................11 2.3.TestProcedure............................................................................................................................................11 2.4.TestResult...................................................................................................................................................12 3.RadiatedSpuriousEmissions...................................................................14 3.1.Limit..............................................................................................................................................................14 3.2.TestSetup....................................................................................................................................................15 3.3.TestProcedure............................................................................................................................................17 3.4.TestResult...................................................................................................................................................18 4.MaximumPeakOutputPower....................................................................22 4.1.Limit..............................................................................................................................................................22 4.2.TestSetup....................................................................................................................................................22 4.3.TestProcedure............................................................................................................................................22 4.4.TestResult...................................................................................................................................................22 5.-20dBBandwidthMeasurement...............................................................26 5.1.Limit..............................................................................................................................................................26 5.2.TestSetup....................................................................................................................................................26 5.3.TestProcedure............................................................................................................................................26 5.4.TestResult......................................................................................…

Text truncated - open the document above for the full version.

2.4G-2.48G Test Report of On-Board PIFA Antenna for Frequency Bands SPECIFICATIONS Frequency（MHz） 2400-2480 Peak Gain（dBi） -2.05 Average Gain（dBi） ＞-2 VSWR ＜1.6 Impedance（Ω） 50 Antenna Type Plannar Inverted F on board Polarization Linear Test Environment: Shenzhen Youli Technology Co., Ltd. Antenna Physical Object and Dimensions Passive S-Parameters — Return Loss Smith Antenna Efficiency and Gain Freq Effi Effi Gain Gain (MHz) (%) (dB) (dBi) (dBd) 2400 17.5 -7.57 -2.05 -4.2 2405 15.67 -8.05 -2.77 -4.92 2410 15.73 -8.03 -2.77 -4.92 2415 15.96 -7.97 -2.73 -4.88 2420 16.12 -7.93 -2.68 -4.83 2425 15.11 -8.21 -3 -5.15 2430 16.54 -7.82 -2.66 -4.81 2435 17.58 -7.55 -2.43 -4.58 2440 15.3 -8.15 -3.08 -5.23 2445 18.39 -7.35 -2.34 -4.49 2450 14.76 -8.31 -3.29 -5.44 Freq Effi Effi Gain Gain (MHz) (%) (dB) (dBi) (dBd) 2450 14.76 -8.31 -3.29 -5.44 2455 18.73 -7.27 -2.28 -4.43 2460 14.99 -8.24 -3.26 -5.41 2465 17.83 -7.49 -2.55 -4.7 2470 14.78 -8.3 -3.35 -5.5 2475 18.97 -7.22 -2.28 -4.43 2480 15.03 -8.23 -3.32 -5.47 2485 19.8 -7.03 -2.16 -4.31 2490 16.14 -7.92 -3.07 -5.22 2495 20.79 -6.82 -2 -4.15 2500 15.05 -8.22 -3.42 -5.57 H面 E面 Manufacturer:Zhuhai Xprinter Electronics Technology Co.,Ltd. Office add.:5F,1st Building,613Huawei Road,Qianshan Industrial Park,Xiangzhou District, Zhuhai City, Guangdong Province, Ch ina

Page 1 of 2 FCC ID: 2AWYK-680 Test Photo Page 2 of 2