2AX5I-003Intelligent toilet

USER MANUAL Intelligent Toilet FE118U1-33B FE118U1-43B FE118V1-33B FE118V1-43B Thank you for placing your confidence in us. Thank you for buying our products. You can learn fr om this manual about the use of products and other important issues befor e initial star t-up. Please follow the instructions in this manual car efully. Please keep the manual properly stored for future refer ence. Regarding future product updates, the product is subject to change without prior notice. Illustr ations in this manual serve as visual demonstr ation. We hope you can learn how to use the product through this manual. In order to guaran tee that the Product will always function op timally, and to ensure your personal safety , please do the following: Read these operating instructions carefully before initial start-up and follow these instructions! Soap Solution Replenish 15 Content Safety Notice Introduction Overview Main Operation Remote Control Main Clean & Maintenance 12 12 12 12 Filter Cleaning Surface Cleaning Winterization 13 Long Time No Use 13 Replace Batteries 14 Nozzle Cleaning Operation Knob 1 4 4 4 5 6 5 11 Troubleshooting 16 Technical Data 19 Warranty Card 20 1 SAFETY CAREFULLY READ AND OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS BEFORE USING! WE WILL NOT BEAR ANY RESPONSIBILITY FOR DAMAGE OR LOSS RESULTING FROM FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS. ■ This device is an electric appliance of class I and must be connected to a grounding system. ■ Individuals with disabilities and (or) limited cognitive ability (including children), or those who do not have the necessary knowledge of use, shall not use this product alone. These people must use this product under the strict supervision and guidance of adults who can be responsible for their safety. Please take care of children to ensure that they do not operate this equipment. ■The device is an electrical apparatus and thus shall not be used in a wet or humid environ- ment. If the device is used in a bathroom, an exhaust fan or air vent shall be installed to ensure sucient airflow. Symbols description SymbolDescription Alternating Current Direct Current SymbolDescription Ground Note! Damage to property Danger! High risk, lethal hazards, severe injuries Warning! Medium risk, severe injuries Caution! Low risk, minor injuries Caution! To reduce the risk of malfunction or damage of product Risk of electric shock, do not remove cover. Refer servicing to qualified service personnel ■Do not allow to use industrial water, circulating water or waste water as the source of the product. Please use the water source that meets the standard of living and drinking. ■Do not allow the inlet-hose to be severely pinched, bent, or kinked. ■Do not allow to use harsh or abrasive cleaning substances such as abrasive cleansers, scouring powder or drain cleaner on your ceramic surfaces. Also avoid using steam cleaners and hard, abrasive sponges. The use of acidic cleaners with a pH value between 1 and 4 is highly recommended. ■Do not allow to reuse old hose-sets. Please use new hose-sets supplied with the appliance. ■Do not allow to hit against the ceramics. ■Do not allow to place the product upside down. ■Do not use radio equipment near the product. ■Do not allow to plunge into the news paper, paper diaper, sanitary napkins, etc., which are easy to block the product. ■Do not allow to make remote control contact with water. ■Disconnect the main plug before you start with cleaning the product. Please use dry cloth when cleaning the power plug. 2 SAFETY Warning! To reduce the risk of burns, electrocution, fire, or injury to persons Risque d'électrocution, ne pas retirer le couvercle. Faire appel à un technicien qualifié ■Children or disabled persons may require supervision during use. ■Use this product only for its intended use as described in this manual. Do not use attachments not authorized by the manufacturer. ■Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the product to a service center for examination and repair. ■Keep the cord away from heated surfaces. ■Do not block the air vents on this product. Do not place the toilet on or by objects such as long window curtains that could potentially obstruct the air vents during normal usage. Keep air vents free of lint, hair, and other debris. ■Never use while sleepy or drowsy. ■Never drop or insert any object into any openings or hoses ■Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered. ■Connect this product to a properly grounded outlet only. See Section Grounding instructions on next page. ■Unplug this product before filling water. Fill (reservoir) with water only unless otherwise specified by manufacturer. Do not overfill. Caution! To reduce the risk of malfunction or damage of product ■Do not allow to expose the product directly to sunlight, as it may cause fading or unstable toilet temperature. ■Do not install the intelligent toilet in rooms where the temperature will be less than 4°C (39°F). ■ ■ Do not lean on the toilet cover while using it or it may damage the cover. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, …

Text truncated - open the document above for the full version.

ECO(XIAMEN)TECHNOLOGY INC. Covered Equipment Certification Attestation Letter 9/23/2025 Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should ATTN.: Reviewing Engineer FCC ID: 2AX5I-003 ECO(XIAMEN)TECHNOLOGY INC.(“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. include an explanation on why the equipment is not “covered” equipment. ECO(XIAMEN)TECHNOLOGY INC.(“the applicant”) certifies that, as of the date of the filing of the application, the applicant is notidentified on the Covered List as an entity producing “covered” equipment. ECO(XIAMEN)TECHNOLOGY INC (the applicant) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Signed: Printed name: Yonghua Cheng Title: Certification Engineer Company Name: ECO(XIAMEN)TECHNOLOGY INC. Date:9 /2 3 /202 5

Global Product Services & Consultation LLC SC5098101 U.S. Agent Designation for Service of Process - Certification Attestation Letter 11/27/2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID:2AX5I-003 FRN of Grantee: 0030174999 Per section 2.911(d)(7) of the FCC rules, ECO(XIAMEN) TECHNOLOGY INC (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process: Company Name: Global Product Services and Consultation LLC FCC Registration Number (FRN): 0033406703 Physical U.S. Company Address: 328 W Palm Ave. Monrovia, CA91016, United States Contact Person: Michael Chan Agent Email Address: [email protected] Tel: (626) 366-4358 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Signed: Printed name: Yonghua Cheng Title: Certification Engineer Company: ECO(XIAMEN)TECHNOLOGY INC. Date: 11/27/2025 Agent Signed: Signed: Printed name: Michael Chan Title: Technical Director Company Name: Global Product Services and Consultation LLC Date: 11/27/2025

ECO ECO(XIAMEN)TECHNOLOGYINC. 厦门铱科卫浴科技有限公司 12/12/2025 NemkoNorth America,Inc. 303 River Road Ottawa,Ontario,Canada K1V 1H2 REQUESTFOR CONFIDENTIALITY- FCC FCC ID:2AX5I-003 Pursuantto Sections0.457(d)(1)(ii)and 0.459 of the Commission’sRules andFCC Guidance document726920, we herebyrequestconfidentialtreatmentof informationaccompanyingthis applicationas outlinedbelow: PERMANENTLONG-TERMCONFIDENTIALITY: Schematics Block Diagrams Theoryof Operation Whenthedeviceismarketedbeforetherequestednumberofdayslistedabove,thegranteewill informtheTCBtoreleasetheShort-TermConfidentialityinformationwithheldontheFCCequipment authorizationwebsite. Theaboveinformationcontainstradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthisinformationmightbeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors.TheApplicantunderstandsthatpursuanttoRule 0.457(d)(1)(ii),disclosureofthisApplicationandallaccompanyingmaterialswillnotbemadebefore thedateoftheGrantforthisApplication. Sincerely, Signed: Printedname: YonghuaCheng Title:CertificationEngineer

FCC2025-0037-EUT-External FCC2025-0037-EUT-External FCC2025-0037-EUT-External

公差 TOLERANCE 1.0 标签 586174-* ±1mm 黑色印刷 ECO 厦门铱科卫浴科技有限公司 ECOXIAMENTECHNOLOGY INC. 消银龙不干胶(覆光膜) 边框为裁切线，无需印刷。 SIZE: 50*30MM 50 mm 30 mm FCC ID: 2AX5I-003 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC2025-0037-EUT-Internal FCC2025-0037-EUT-Internal FCC2025-0037-EUT-Internal FCC2025-0037-EUT-Internal FCC2025-0037-EUT-Internal FCC2025-0037-EUT-Internal FCC2025-0037-EUT-Internal

TESTREPORT FCCID2AX5I-003 Applicant:ECO(Xiamen)TECHNOLOGYINC ProductName:Intelligenttoilet ModelNo.:RDWM-RSC-ECO CVCTestingTechnologyCo.,Ltd. TestReportNo.: FCC2025-0037-H TestReportNo.FCC2025-0037-HPage 2 of13 LTC-R-7094-RF-Part22-A0 ProductNameIntelligenttoiletTradeMarkWDI Type/ModelRDWM-RSC-ECOSampleStatus— ApplicantECO(Xiamen)TECHNOLOGYINC ApplicantAddressNo.2,XiafeiEastRoad,HaicangDistrict,XiamenCity ManufacturerECO(Xiamen)TECHNOLOGYINC Manufacturer Address No.2,XiafeiEastRoad,HaicangDistrict,XiamenCity ProducerChangtaiYikeTechnologyCo.,LTD. ProducerAddress YingtangIndustrypark,GunongFarm,EconomicDevelopmentzone,Changtai County,ZhangzhouCity,China Quantityofsample1pcs Sample Identification 1-1 TestedAccording To FCCPart2(Section2.1093) KDB447498D04v01 IEEEC95.1 TestItemRFExposure ReceivingDate2025.7.14DateofTesting2025.7.15~2025.9.10 Testconclusion Theequipmentundertestwasfoundto comply withtherequirementsof thestandardsapplied. FinalVerdict ： Pass. SealofCVC Dateofissue:2025-09-19 Note1:ThistestreportrelatesonlytotheEUT,andshallnotbereproducedexceptinfull,withoutwrittenapprovalof CVC. Approvedby: ChenHuawen Reviewedby: XuZhenfei Testedby: LuWeiji TestReportNo.FCC2025-0037-HPage 3 of13 LTC-R-7094-RF-Part22-A0 TABLEOFCONTENTS 1.GENERALPRODUCTINFORMATION.............................................................................................................................4 1.1GENERALINFORMATION....................................................................................................................................................4 2.HUMANEXPOSUREASSESSMENT................................................................................................................................5 2.1RFEXPOSURETESTEXEMPTIONSFORSINGLESOURCE...........................................................................................................5 2.1.11-MWTESTEXEMPTION................................................................................................................................................5 2.1.2SAR-BASEDEXEMPTION.................................................................................................................................................5 2.1.3MPE-BASEDEXEMPTION...............................................................................................................................................6 2.1.4MPEEXPOSURELIMITS..................................................................................................................................................7 2.2RFEXPOSURETESTEXEMPTIONSFORSIMULTANEOUSTRANSMISSIONSOURCES.........................................................................9 2.2.11-MWTESTEXEMPTIONFORMULTIPLESOURCES..............................................................................................................9 2.2.2SIMULTANEOUSTRANSMISSIONWITHBOTHSAR-BASEDANDMPE-BASEDTESTEXEMPTIONS..................................................9 2.3CLASSIFICATION.........................................................................................................................................................10 3.RFOUTPUTPOWER...................................................................................................................................................11 4.TESTRESULTS.............................................................................................................................................................12 TestReportNo.FCC2025-0037-HPage 4 of13 LTC-R-7094-RF-Part22-A0 1.GeneralProductInformation 1.1Generalinformation ProductNameIntelligenttoilet ModelNo.RDWM-RSC-ECO Additionalmodel— PowerSupplyAC120V60Hz SerialNumber(SN) / AntennaTypePCBAntenna AntennaGain3dBi(providedbyclient) BeamforminggainUnsupported(providedbyclient) FrequencyRange2402~2480MHz OperateTemp.Range4°C-40°C Note： 1.TheinformationoftheEUTisdeclaredbythemanufacturer. 2.Thelaboratoryisnotresponsiblefortheproducttechnicalspecificationprovidedbytheclient. 3.TheconductivemethodofthistestarealltestedonthewholeBluetoothmodule,anditspower supplyvoltageis3.3V. 4.Productphotoreferencereport:FCC2025-0037-EUT. TestReportNo.FCC2025-0037-HPage 5 of13 LTC-R-7094-RF-Part22-A0 2.HumanExposureAssessment 2.1RFExposureTestExemptionsforSingleSource 2.1.11-mWTestExemption The1mWTestExemptionof§1.1307(b)(3)(i)(A)appliesforsinglefixed,mobile,and portableRFsourceswithavailablemaximumtime-averagedpowerofnomorethan1mW, regardlessofseparationdistance. The1mWblanketexemptionappliesatseparationdistanceslessthan0.5cm,includingwhere thereisnoseparation.Thisexemptionshallnotbeusedinconjunctionwithotherexemption criteriaotherthanthoseformultipleRFsourcesinparagraph§1.1307(b)(3)(ii)(A). The1mWexemptionisindependentofservicetypeandcoversthefullrangeof100kHzto 100GHz,butitshallnotbeusedinconjunctionwithotherexemptioncriteriaorindeviceswith higher-powertransmittersoperatinginthesametime-averagingperiod.Exposurefromsuch higher-powertransmitterswouldinvalidatetheunderlyingassumptionthatexposurefromthe lower-powertransmitteristheonlycontributortoSARintherelevantvolumeoftissue. 2.1.2SAR-BasedExemption Amorecomprehensiveexemption,consideringavariablepowerthresholdthatdependsonboth theseparationdistanceandpower,isprovidedin§1.1307(b)(3)(i)(B).Thisexemptionis applicabletothefrequencyrangebetween300MHzand6GHz,withtestseparationdistances between0.5cmand40cm,andforallRFsourcesinfixed,mobile,andportabledeviceexposure conditions. Accordingly,aRFsourceisconsideredanRFexemptdeviceifitsavailablemaximumtime averaged(matchedconducted)poweroritseffectiveradiatedpower(ERP),whicheverisgreater, arebelowaspecifiedthreshold.Thisexemptionthresholdwasderivedbasedongeneral population1-gSARrequirements. Generalfrequencyandseparation-distancedependentMPE-basedeffectiveradiatedpower (ERP)thresholdsareinTableB.1[Table1of§1.1307(b)(1)(i)(C)]tosupportanexemption fromfurtherevaluationfrom300kHzthrough100GHz. ThetableappliestoanyRFsource(i.e.,singlefixed,mobile,andportabletransmitte…

Text truncated - open the document above for the full version.

TESTREPORT FCCID2AX5I-003 Applicant:ECO(Xiamen)TECHNOLOGYINC ProductName:Intelligenttoilet ModelNo.:RDWM-RSC-ECO CVCTestingTechnologyCo.,Ltd. TestReportNo.: FCC2025-0037-RF TestReportNo.FCC2025-0037-RFPage 2 of 37 LTC-R-7092-RF-Part15C-A1 Applicant Name:ECO(Xiamen)TECHNOLOGYINC Address:No.2,XiafeiEastRoad,HaicangDistrict,XiamenCity Manufacturer Name:ECO(Xiamen)TECHNOLOGYINC Address:No.2,XiafeiEastRoad,HaicangDistrict,XiamenCity Producer Name:ChangtaiYikeTechnologyCo.,LTD. Address:YingtangIndustrypark,GunongFarm,Economic Developmentzone,ChangtaiCounty,ZhangzhouCity,China EquipmentUnderTest ProductName:Intelligenttoilet ModelNo.:RDWM-RSC-ECO Trademark:WDI Serialno.: — Sampling:1-1 DateofReceipt.2025.7.14DateofTesting2025.7.15~2025.9.10 TestSpecificationTestResult FCCCFR47Part15CRadioFrequencyDevices ANSIC63.10-2020/Cor1-2023 KDB558074D0115.247MeasGuidancev05r02 PASS EvaluationofTestResult Theequipmentundertestwasfoundtocomplywiththe requirementsofthestandardsapplied. SealofCVC Dateofissue:2025-09-19 Approvedby: ChenHuawen Reviewedby: XuZhenfei Testedby: LuWeiji OtherAspects: NONE. Abbreviations:Pass=passedFail=failedN/A=notapplicableEUT=equipment,sample(s)undertested Note1:ThistestreportrelatesonlytotheEUT,andshallnotbereproducedexceptinfull,withoutwrittenapprovalofCVC. TestReportNo.FCC2025-0037-RFPage 3 of 37 LTC-R-7092-RF-Part15C-A1 TABLEOFCONTENTS 1.GENERALPRODUCTINFORMATION.................................................................................................................4 1.1GENERALINFORMATION .............................................................................................................................................4 2.TESTSITES..............................................................................................................................................................5 2.1TESTFACILITIES .........................................................................................................................................................5 2.2DESCRIPTIONOFNON-STANDARDMETHODANDDEVIATIONS ................................................................................5 2.3LISTOFTESTANDMEASUREMENTINSTRUMENTS...................................................................................................5 3.TESTCONFIGURATION .........................................................................................................................................6 3.1TESTMODE ................................................................................................................................................................6 3.2DUTYCYCLE ...............................................................................................................................................................7 4.SUMMARYOFMEASUREMENTRESULTS........................................................................................................8 5.MEASUREMENTPROCEDURE...........................................................................................................................9 5.1CONDUCTEDEMISSION ..............................................................................................................................................9 5.2RADIATEDEMISSION................................................................................................................................................13 5.3MAXIMUMCONDUCTEDOUTPUTPOWER.................................................................................................................24 5.4MINIMUM6DBBANDWIDTH .....................................................................................................................................26 5.5OCCUPIEDCHANNELBANDWIDTH ...........................................................................................................................28 5.6BANDEDGEMEASUREMENT....................................................................................................................................30 5.7MAXIMUMPOWERSPECTRALDENSITY..................................................................................................................32 5.8SPURIOUSRFCONDUCTEDEMISSIONS .................................................................................................................34 6.APPENDIXX...........................................................................................................................................................36 TestReportNo.FCC2025-0037-RFPage 4 of 37 LTC-R-7092-RF-Part15C-A1 1.GeneralProductInformation 1.1Generalinformation ProductNameIntelligenttoilet ModelNo.RDWM-RSC-ECO Additionalmodel — PowerSupplyAC120V60Hz SerialNumber(SN)/ HW-ReleaseNO/ SW-ReleaseNO/ specificpowersettings11 AntennaTypePCBAntenna AntennaGain3dBi(providedbyclient) BeamforminggainUnsupported(providedbyclient) FrequencyRange2402~2480MHz ChannelNumber40Channels TypeofModulationGFSK OperateTemp.Range4°C-40°C Note： 1.TheinformationoftheEUTisdeclaredbythemanufacturer. 2.Thelaboratoryisnotresponsiblefortheproducttechnicalspecificationprovidedbytheclient. 3.TheconductivemethodofthistestarealltestedonthewholeBluetoothmodule,anditspowersupply voltageis3.3V. 4.Productphotoreferencereport:FCC2025-0037-EUT. TestReportNo.FCC2025-0037-RFPage 5 of 37 LTC-R-7092-RF-Part15C-A1 2.TestSites 2.1TestFacilities ThetestsandmeasurementsrefertothisreportwereperformedbyRFtestingLab.ofCVCTesting TechnologyCo.,Ltd. Add.:No.3,TiantaiyiRoad,KaitaiAvenue,ScienceCity,Guangzhou,Guangdong,510663,People's RepublicofChina Telephone:+86-20-32293888 Fax:+86-20-32293889 FCC(Testfirmdesignationnumber：CN1282) IC(TestfirmCABidentifiernumber：CN0103) 2.2DescriptionofNon-standardMethodandDeviations Thetestingandmeasurementmethodsusedinthisreportareappliedbyallstandardmethods.Notany non-standardmethodordeviationfromtheusedstandardswasused. 2.3ListofTestandMeasurementInstruments RefertoAppendixX. TestReportNo.FCC2025-0037-RFPage 6 of 37 LTC-R-7092-RF-Part15C-A1 3.Te…

Text truncated - open the document above for the full version.

AppendixA:DTSBandwidth TestResult TestModeAntennaChannel DTSBW [MHz] FL[MHz]FH[MHz]Limit[MHz]Verdict BLE_1MAnt1 24020.732401.562402.290.5PASS 24400.722439.562440.290.5PASS 24800.722479.562480.280.5PASS BLE_2MAnt1 24021.222401.292402.510.5PASS 24401.222439.282440.500.5PASS 24801.212479.292480.500.5PASS TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 BLE_2M_Ant1_2480 AppendixB:OccupiedChannelBandwidth TestResult TestModeAntennaChannel OCB[MHz] FL[MHz]FH[MHz]Limit[MHz]Verdict BLE_1MAnt1 24021.0592401.40862402.4675------ 24401.0672439.40062440.4675------ 24801.0672479.40062480.4675------ BLE_2MAnt1 24022.1262400.88512403.0110------ 24402.1382438.87712441.0150------ 24802.1422478.87312481.0150------ TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 BLE_2M_Ant1_2480 AppendixD:Maximumpowerspectraldensity TestResult TestModeAntennaChannelResult[dBm/3kHz]Limit[dBm/3kHz]Verdict BLE_1MAnt1 2402-15.27≤8.00PASS 2440-15.27≤8.00PASS 2480-15.41≤8.00PASS BLE_2MAnt1 2402-16.93≤8.00PASS 2440-16.92≤8.00PASS 2480-23.08≤8.00PASS TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 BLE_2M_Ant1_2480 AppendixE:Bandedgemeasurements TestResult TestModeAntennaChNameChannelRefLevel[dBm]Result[dBm]Limit[dBm]Verdict BLE_1MAnt1 Low2402-0.87-41.89≤-20.87PASS High2480-0.86-45.16≤-20.86PASS BLE_2MAnt1 Low2402-1.21-30.3≤-21.21PASS High2480-7.11-47.1≤-27.11PASS TestGraphs BLE_1M_Ant1_Low_2402 BLE_1M_Ant1_High_2480 BLE_2M_Ant1_Low_2402 BLE_2M_Ant1_High_2480 AppendixF:ConductedSpuriousEmission TestResult TestModeAntennaChannel FreqRange [MHz] RefLevel [dBm] Result[dBm]Limit[dBm]Verdict BLE_1MAnt1 2402 Reference-0.85-0.85---PASS 30~1000-0.85-59.47≤-20.85PASS 1000~26500-0.85-47.44≤-20.85PASS 2440 Reference-0.95-0.95---PASS 30~1000-0.95-59.6≤-20.95PASS 1000~26500-0.95-47.67≤-20.95PASS 2480 Reference-1.15-1.15---PASS 30~1000-1.15-59.62≤-21.15PASS 1000~26500-1.15-47.65≤-21.15PASS BLE_2MAnt1 2402 Reference-1.19-1.19---PASS 30~1000-1.19-59.1≤-21.19PASS 1000~26500-1.19-47.87≤-21.19PASS 2440 Reference-1.27-1.27---PASS 30~1000-1.27-58.68≤-21.27PASS 1000~26500-1.27-47.84≤-21.27PASS 2480 Reference-7.47-7.47---PASS 30~1000-7.47-59.37≤-27.47PASS 1000~26500-7.47-48.13≤-27.47PASS TestGraphs BLE_1M_Ant1_2402_0~Reference BLE_1M_Ant1_2402_30~1000 BLE_1M_Ant1_2402_1000~26500 BLE_1M_Ant1_2440_0~Reference BLE_1M_Ant1_2440_30~1000 BLE_1M_Ant1_2440_1000~26500 BLE_1M_Ant1_2480_0~Reference BLE_1M_Ant1_2480_30~1000 BLE_1M_Ant1_2480_1000~26500 BLE_2M_Ant1_2402_0~Reference BLE_2M_Ant1_2402_30~1000 BLE_2M_Ant1_2402_1000~26500 BLE_2M_Ant1_2440_0~Reference BLE_2M_Ant1_2440_30~1000 BLE_2M_Ant1_2440_1000~26500 BLE_2M_Ant1_2480_0~Reference BLE_2M_Ant1_2480_30~1000 BLE_2M_Ant1_2480_1000~26500 AppendixG:DutyCycle TestResult TestModeAntennaChannel ONTime [ms] Period [ms] XDC [%] xFactor LimitVerdict BLE_1MAnt1 24020.390.630.619061.902.08------ 24400.390.630.619061.902.08------ 24800.390.630.619061.902.08------ BLE_2MAnt1 24020.200.630.317531.754.98------ 24400.200.630.317531.754.98------ 24800.200.630.317531.754.98------ TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 BLE_2M_Ant1_2480

1，Antenna Description Antenna plate PCB antenna Market/model name RDWM21501-ANT1 Manufacture Shenzhen Jieteng Electronics Co., Ltd Manufacture ADD Building 1, Huafeng Science and Technology Park, No. 54 Guangtian Road, Luotian Community, Songgang Town, Bao'an District, Shenzhen City Antenna Max Gain 3dbi Frequency Range 2402-2480MHz Connect Type PCB antenna VSWR 1.6 2，Picture of Antenna

TestReportNo.:FCC2025-0037 1.PhotographsOfTestSetup(Bluetooth-LE1M&2M) ConductedEmissionTestSetup TestReportNo.:FCC2025-0037 RadiatedTestSetup RadiatedTestSetup TestReportNo.:FCC2025-0037 RadiatedTestSetup RadiatedTestSetup