2AXLU-MINIMIrangefinder

FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. Th e device can be used in portable exposure condition without restriction.

Shenzhen Valueplus2 Electronic Corp.,Ltd. Room 12A, Building A, Zhongyu Green High Tech Industrial Park, Wenge Road, Gongming Street, Guangming New Area, Shenzhen, Guangdong, China Date: 2020-09-17 Dear Sir/Madam, We, Shenzhen Valueplus2 Electronic Corp.,Ltd. Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model: Product name: Golf rangefinder Model no.: Minimi, Mini, Mini Plus, Sniper, QQ, QQ800, QQ1000, QQ1500 Sincerely, Name/Title： Gong Wu/Manager Company: Shenzhen Valueplus2 Electronic Corp.,Ltd. Address: Room 12A, Building A, Zhongyu Green High Tech Industrial Park, Wenge Road, Gongming Street, Guangming New Area, Shenzhen, Guangdong, China Phone: +86 18923720211 E-Mail: [email protected]

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date: 2020/09/17 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2AXLU-MINIMI Minimi,Mini,Mini Plus,Sniper,QQ,QQ800,QQ1000, QQ1500 For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： Gong Wu/Manager Company: Shenzhen Valueplus2 Electronic Corp.,Ltd. Address: Room 12A, Building A, Zhongyu Green High Tech Industrial Park, Wenge Road, Gongming Street, Guangming New Area, Shenzhen, Guangdong, China Phone: +86 18923720211 E-Mail: [email protected]

Shenzhen Valueplus2 Electronic Corp.,Ltd. Room 12A, Building A, Zhongyu Green High Tech Industrial Park, Wenge Road, Gongming Street, Guangming New Area, Shenzhen, Guangdong, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2020/09/17 To whom it may concern: We, Shenzhen Valueplus2 Electronic Corp.,Ltd. the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AXLU-MINIMI including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： Gong Wu/Manager Company: Shenzhen Valueplus2 Electronic Corp.,Ltd. Address: Room 12A, Building A, Zhongyu Green High Tech Industrial Park, Wenge Road, Gongming Street, Guangming New Area, Shenzhen, Guangdong, China Phone: +86 18923720211 E-Mail: [email protected]

FCC ID: 2AXLU-MINIMI FCC ID: 2AXLU-MINIMI

FCC ID: 2AXLU-MINIMI FCC ID:2AXLU-MINIMI

FCC ID: 2AXLU-MINIMI FCC ID: 2AXLU-MINIMI

Report No.: TZ200901626-E1 FCC TEST REPORT Test report On Behalf of Shenzhen Valueplus2 Electronic Corp.,Ltd. For rangefinder Model No.: Minimi,Mini,Mini Plus,Sniper,QQ,QQ800,QQ1000, QQ1500 FCC ID: 2AXLU-MINIMI Prepared for : Shenzhen Valueplus2 Electronic Corp.,Ltd. Room 12A, Building A, Zhongyu Green High Tech Industrial Park, Wenge Road, Gongming Street, Guangming New Area, Shenzhen, Guangdong, China Prepared By : Shenzhen Tongzhou Testing Co.,Ltd 1th Floor, Building 1, Haomai High-tech Park, Huating Road 387, Dalang Street, Longhua, Shenzhen, China Date of Test: 2020/8/20 ~ 2020/09/17 Date of Report: 2020/09/17 Report Number: TZ200901626-E1 The test report apply only to the specific sample(s) tested under stated test conditions It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: TZ200901626-E1 TEST RESULT CERTIFICATION Applicant’s name ....................... : Shenzhen Valueplus2 Electronic Corp.,Ltd. Address ........................................ : Room 12A, Building A, Zhongyu Green High Tech Industrial Park, Wenge Road, Gongming Street, Guangming New Area, Shenzhen, Guangdong, China Manufacture's Name .................. : Shenzhen Valueplus2 Electronic Corp.,Ltd. Address ........................................ : Room 12A, Building A, Zhongyu Green High Tech Industrial Park, Wenge Road, Gongming Street, Guangming New Area, Shenzhen, Guangdong, China Product description Trade Mark ................................... : Caddytalk Product name ............................... : rangefinder Model and/or type reference ........ : Minimi,Mini,Mini Plus,Sniper,QQ,QQ800,QQ1000, QQ1500 Standards ................................... : FCC Part 15.231 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Tongzhou Testing Co.,Ltd is acknowledged as copyright owner and source of the material. Shenzhen Tongzhou Testing Co.,Ltd takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ................................................... : Date (s) of performance of tests .................... : 2020/8/20 ~ 2020/09/17 Date of Issue .................................................. : 2020/09/17 Test Result ..................................................... : Pass Testing Engineer : (Nancy Li) Technical Manager : (Hugo Chen) Authorized Signatory : (Andy Zhang) Report No.: TZ200901626-E1 Revision History Revision Issue Date Revisions Revised By 000 2020/9/17 Initial Issue Andy Zhang Report No.: TZ200901626-E1 Contents 1 T E S T S T A N D A R D S ................................................................. 5 2 S U M M A R Y ............................................................................ 6 2.1 General Remarks 6 2.2 Product Description 6 2.3 Equipment Under Test 6 2.4 Short description of the Equipment under Test (EUT) 6 2.5 Block Diagram of Test Setup 7 2.6 Special Accessories 7 2.7 Related Submittal(s) / Grant (s) 7 2.8 Modifications 7 3 T E S T E N V I R O N M E N T .............................................................. 8 3.1 Address of the test laboratory 8 3.2 Test Facility 8 3.3 Summary of measurement results 8 3.4 Statement of the measurement uncertainty 8 3.5 Operation of EUT During Testing 8 3.6 Equipments Used during the Test 9 4 T E S T C O N D I T I O N S A N D R E S U L T S ........................................... 10 4.1 AC Power Conducted Emission 10 4.2 Radiated Emission 11 4.3 20dB Bandwidth 16 4.4 Deactivation Time 17 4.5 Antenna Requirement 18 5 T E S T S E T U P P H O T O S O F T H E E U T ......................................... 19 6 P H O T O S O F T H E E U T ........................................................... 20 Report No.: TZ200901626-E1 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules Part 15.231:Periodic operation in the band 40.66-40.70 MHz and above 70 MHz. ANSI C63.10:2013 : American National Standard for Testing Unlicensed Wireless Devices Report No.: TZ200901626-E1 2 S U M M A R Y 2.1 General Remarks Date of receipt of test sample : Aug.20, 2020 Testing commenced on : Aug.20, 2020 Testing concluded on : Sep.01, 2020 2.2 Product Description Product Name: rangefinder Model/Type reference: Minimi Testing sample ID： TZ200901626-1#(Engineer sample) TZ200901626-2# (Normal sample) Power supply: DC3.0V from battery Modulation: ASK Operation frequency: 433.925MHz Channel number: 1 Antenna type: Internal antenna Antenna gain: 0 dBi 2.3 Equipment Under Test Power supply system utilised Power supply voltage : ○ 230V / 50 Hz ○ 120V / 60Hz ○ 12 V DC ○ 24 V DC ● Other (specified in blank below) DC 3.0V from battery 2.4 Short description of the Equipment under Test (EUT) This is a rangefinder. For more details, refer to the user’s manual of the EUT. Report No.: TZ200901626-E1 2.5 Block Diagram of Test Setup 2.6 Special Accessories Follow auxiliary equipment(s) test with EUT that provided by the manufacturer or laboratory is listed as follow: Description Manufacturer Model Technical Parameters Certificate Provided by / / / / / / / / / / / / / / / / / / / / / / / / 2.7 Related Submittal(s) / Grant (s) This submittal(s) (test report) is intended for the device filing to comply with Section 15.231 of the FCC Part 15, Subpart C Rules. 2.8 Modifications No modifications were implemented to meet testing criteria. EUT DC 3.0V Report No.: TZ200901626-E1 3 T E S T E N V I R O N M E N T 3.1 Address of the test laboratory Shenzhen Tongzhou Testing Co.,Ltd 1th Floor, Building 1, Haomai High-tech Park, Huating Road 387, Dalang Street, Longhua, Shenzhen, China The 3m-Semi anechoic test site fulfils CISPR 16-1-4 according to ANSI C63.4:2014 and CISPR 16-1-4:2010 SVSWR requirement for radiated emission above 1GHz. 3.2 Test Facility The test facility is recognized, cer…

Text truncated - open the document above for the full version.

FCC ID: 2AXLU-MINIMI _______________________________________________________________________________________________ 1. TEST SETUP PHOTOGRAPHS 1.1. Photo of Radiated Emissions Measurement Fig. 1 Fig. 2