2AXQL-R111Remote plug-in module

User Manual CONTACT US FOR MORE TECH SUPPORT +1 888892-0155 Mon-Fri 7:00AM - 7:00PM (PST) R111 14 +1 888892-0155 Mon-Fri 7:00AM - 7:00PM (PST) CONTACT US FOR MORE TECH SUPPORT +1(732)207-0697 Content 2 Product Introduction 1 Quick Guide 2.1 Product List 2.2 Product Appearance 2.3 Product Charging 5 5 6 8 1 3. Ruko Scanner App 3.1 Ruko Scanner Download 3.2 Video Tutorials 3.3 Ruko Scanner Interface 9 9 10 10 4. RID Module Usage 4.1 RID Serial Number Registration 4.2 Drone Information Binding 4.3 RID Module Installation 4.4 RID Information Broadcasting 4.5 Broadcast Data Viewing 13 13 15 18 19 21 5. Specification 23 6. Common Problems and Solutions 24 7. Safety Precautions 25 8. FCC Warning27 Copyright ©2024 Ruko All Rights Reserved.1 R111 User Manual 1 Quick Guide Charger not included ≤15W 1.Download App Charge the Batteries Ruko Scanner Android iOS Press the power switch for 3 seconds; Press the settings button for 3 seconds; 1. 2. Copyright ©2024 Ruko All Rights Reserved.2 R111 User Manual Register with the RID Serial Number on the FAA Drone Zone website. 3.Drone Information Binding 2.RID Serial Number Registration 18696000001 Öóı ýĻŅŮýD%ŦýŢğýŦĽųĻòýŢ 滶滽滻滾滻滵滵滵滵滵滶 dşýŢÖŮŅŢD% 澿澿澿澿澿澿澿澿澿 ğŢóŢÖĒŮ\Ņùýĵ 澿澿澿澿澿澿澿澿澿 ªýğēěŮ瀀ē瀁 澿澿澿澿澿澿澿澿澿 ‘… 澿澿澿澿澿澿澿澿澿 …©) ýēğŦŮŢÖŮğŅĽ^ųĻòýŢ 澿澿澿澿澿澿澿澿澿 %ýƋğóýŦýÖŢóě %ŢŅĽýŦÖŢŅųĽù ĵųýŮŅŅŮě …ýŮŮğĽēŦ %ýƋğóý 滶滽滻滾滻滵滵滵滵滵滶 ~ĵýÖŦýĵŅĽēşŢýŦŦŦýŮŮğĽēòųŮŮŅĽÖĒŮýŢşŅƌýŢŅĽŮěýĻŅùųĵý …ýÖ ŢóěğĽēùŢŅĽýÖĽùùğŦşĵÖƒŦýŢğýŦĽųĻòýŢ ~ĵýÖŦýóĵğóıŦýŢğýŦĽųĻòýŢŮŅýĽŮýŢŦýŮŮğĽēşÖēý 滶澳 滷澳 滸澳 After bind is done , pls restart the device 3. 4. Copyright ©2024 Ruko All Rights Reserved.3 R111 User Manual Restart the RID module until the indicator on the right side blinks rapidly. Click on the device serial number to enter settings on the App; Input binding information and save it; Note: The binding succeeds only after the device is restarted. 5. Long press for 3 seconds Copyright ©2024 Ruko All Rights Reserved.4 R111 User Manual 4.RID Module Installation 5.RID Information Broadcasting Search for GPS signal outdoors (90-120s). Broadcast Information: 1. 2. 1 2 3 滶滽滻滾滻滵滵滵滵滵滶 User Manual CONTACT US FOR MORE TECH SUPPORT +1 888892-0155 Mon-Fri 7:00AM - 7:00PM (PST) R111 14 Copyright ©2024 Ruko All Rights Reserved.5 R111 User Manual 2.1 Product List 2 Product Introduction 1. RID Module 2. Velcro 3. Charging Cable4. Instruction Manual Copyright ©2024 Ruko All Rights Reserved.6 R111 User Manual 2.2 Product Appearance The Ruko R111 is a small, lightweight external remote ID broadcast module that allows you to repeatedly change the settings to bind other drone device, which needs remote ID broadcast module requirment. 1.Indicator light 2.Switch 3.Setting 4.Charging Port 1 2 3 4 Copyright ©2024 Ruko All Rights Reserved.7 R111 User Manual Charging Indicator Indicator turns red when charging Charging Indicator Indicator turns green when fully charged Low Battery Indicator Red light blinks when in low battery. Working Indicator Star-searching Status: The indicator lights up and flashes in turn after powering on. Star-searching Completed Status: the middle light is always on, the right light flashes. Setting Indicator Enter Setup: Green light is always on. Setup Succeeded: Green light flashes quickly. IconIcon NameNotes Copyright ©2024 Ruko All Rights Reserved.8 R111 User Manual 2.3 Product Charging Please be sure to fully charge it before each use: Please use 5V/2A-3A USB charging plug. In the charging state, the indicator will be in red light. When the indicator turns green, it means charging completed. After charging is completed, please remove the charger in time. When using 5V/2A charging plug, it may take about 40 minutes to complete charging. 1. 2. 3. 4. Adapter5V/3ANot Included (Charging) (Charging finished) Copyright ©2024 Ruko All Rights Reserved.9 R111 User Manual 3.1 Ruko Scanner Download 3 Ruko Scanner App Scan the QR code to get the download link. Connect the Ruko Scanner App to use R111 remote ID module. The App supports Android 6.0 and above, iOS 10.0.2 and above. You can search for Ruko Scanner on Google and Apple stores to download it. Scan the QR code to download: Android phones need to scan the camera scanning function on the browser to download. Notes on App download: Android iOS 3.3 Ruko Scanner Interface According to the corresponding aircraft, visit the link or scan the QR code below to locate the model to watch tutorial videos or get more technical support, which how to use the aircraft safely. Copyright ©2024 Ruko All Rights Reserved.10 R111 User Manual %ýƋğóýŦýÖŢóě %ŢŅĽýŦÖŢŅųĽù ĵųýŮŅŅŮě …ýŮŮğĽēŦ %ýƋğóý 滶滽滻滾滻滵滵滵滵滵滶 ~ĵýÖŦýĵŅĽēşŢýŦŦŦýŮŮğĽēòųŮŮŅĽÖĒŮýŢşŅƌýŢŅĽŮěýĻŅùųĵý …ýÖ ŢóěğĽēùŢŅĽýÖĽùùğŦşĵÖƒŦýŢğýŦĽųĻòýŢ ~ĵýÖŦýóĵğó ıŦýŢğýŦĽųĻòýŢŮŅýĽŮýŢŦýŮŮğĽēşÖēý 滶澳 滷澳 滸澳 3.2 Video Tutorials Remote ID Search Bar Operation Guide Bar Drones around Bar Display remote ID broadcast serial number. (Click the serial number + long press the module setting button to enter the interface of Information Editing Bar) Instruction / Video provide the operation guide. Click it to enter the Surrounding Drones Interface to view the information of surrounding drones. IconIcon NameDisplay Information Copyright ©2024 Ruko All Rights Reserved.11 R111 User Manual %ýƋğóý 滶滽滻滾滻滵滵滵滵滵滶 12 Öóı ýĻŅŮýD%ŦýŢğýŦĽųĻòýŢ 滶滽滻滾滻滵滵滵滵滵滶 dşýŢÖŮŅŢD% 澿澿澿澿澿澿澿澿澿 ğŢóŢÖĒŮ\Ņùýĵ 澿澿澿澿澿澿澿澿澿 ªýğēěŮ瀀ē瀁 澿澿澿澿澿澿澿澿澿 ‘… 澿澿澿澿澿澿澿澿澿 …©) ýēğŦŮŢÖŮğŅĽ^ųĻòýŢ 澿澿澿澿澿澿澿澿澿 Information Editing Bar Edit the related registration information of your drone. Surrounding Drones Interface Display the serial number information of surrounding drones. IconIcon NameDisplay Information Copyright ©2024 Ruko All Rights Reserved. R111 User Manual After bind is done , pls restart the device 18696000001 4.1 RID Serial Number Registration 4 RID Module Usage In order to comply with FAA Declaration of Compliance, the Remote ID Module serial number must be registered with the FAA website. The serial number is available on the device case stic…

Text truncated - open the document above for the full version.

Shenzhen Ruike Innovation Technology Co., Ltd Unit1 701, Rufeng Building, 573 Bulong Rd, Bantian Maantang community, Longgang district, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jun. 24, 2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AXQL-R111 FRN: 0030041628 [Shenzhen Ruike Innovation Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (DAZHONG LUO)

Shenzhen Ruike Innovation Technology Co., Ltd Unit1 701, Rufeng Building, 573 Bulong Rd, Bantian Maantang community, Longgang district, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jun. 24, 2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AXQL-R111 FRN: 0030041628 [Shenzhen Ruike Innovation Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (DAZHONG LUO)

Shenzhen Ruike Innovation Technology Co., Ltd. Unit1 701, Rufeng Building, 573 Bulong Rd, Bantian Maantang community, Longgang district, Shenzhen, China Jun. 24, 2024 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID: 2AXQL-R111 Models: R111, R112, R113, R114, R115 To Whom It May Concern: We, The Shenzhen Ruike Innovation Technology Co., Ltd. hereby declare that the model : R112, R113, R114, R115 is identical with the model : R111, except the model name. Sincerely, Shenzhen Ruike Innovation Technology Co., Ltd. Signature: [DAZHONG LUO, CEO]

Shenzhen Ruike Innovation Technology Co., Ltd Unit1 701, Rufeng Building, 573 Bulong Rd, Bantian Maantang community, Longgang district, Shenzhen, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jun. 24, 2024 Subject; Request for Confidentiality FCC ID: 2AXQL-R111 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: DAZHONG LUO Title: CEO

Shenzhen Ruike Innovation Technology Co., Ltd. Unit1 701, Rufeng Building, 573 Bulong Rd, Bantian Maantang community, Longgang district, Shenzhen, China Letter of Authorization Company: Shenzhen Ruike Innovation Technology Co., Ltd. Address: Unit1 701, Rufeng Building, 573 Bulong Rd, Bantian Maantang community, Longgang district, Shenzhen, China Product Name: Remote plug-in module Model Number(s): R111, R112, R113, R114, R115 Product Description: Remote plug-in module We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Jun. 24, 2024 Name: DAZHONG LUO Title: CEO Company: Shenzhen Ruike Innovation Technology Co., Ltd.

Report No.: AGC15705240356AP02 Page 1 of 3 EXTERNAL PHOTOS TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: AGC15705240356AP02 Page 2 of 3 FRONT VIEW OF EUT BACK VIEW OF EUT Report No.: AGC15705240356AP02 Page 3 of 3 LEFT VIEW OF EUT RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 40mm*30mm FCC ID: 2AXQL-R111 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Report No.: AGC15705240356AP02 Page 1 of 3 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) BATTERY VIEW OF EUT (FIGURE 1) Report No.: AGC15705240356AP02 Page 2 of 3 INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 2) BT Antenna Report No.: AGC15705240356AP02 Page 3 of 3 INTERNAL VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 4) ****************************************End of Report*************************************

Page 1 of 9 RF Exposure Report Report No.: AGC15705240356FH01 FCC ID : 2AXQL-R111 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Remote plug-in module BRAND NAME : Ruko MODEL NAME : R111, R112, R113, R114, R115 APPLICANT : Shenzhen Ruike Innovation Technology Co., Ltd. DATE OF ISSUE : Jun. 24, 2024 STANDARD(S) : FCC KDB 447498 D01 V06 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC15705240356FH01 Page 2 of 9 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jun. 24, 2024 Valid Initial Release Report No.: AGC15705240356FH01 Page 3 of 9 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Measurement Results ..................................................................................................................................... 9 6. Measurement Evaluation ................................................................................................................................ 9 Report No.: AGC15705240356FH01 Page 4 of 9 1. General Information Applicant Shenzhen Ruike Innovation Technology Co., Ltd. Address Unit1 701, Rufeng Building, 573 Bulong Rd, Bantian Maantang community, Longgang district, Shenzhen, China Manufacturer Shenzhen Ruike Innovation Technology Co., Ltd. Address Unit1 701, Rufeng Building, 573 Bulong Rd, Bantian Maantang community, Longgang district, Shenzhen, China Factory Shenzhen Ruike Innovation Technology Co., Ltd. Address Unit1 701, Rufeng Building, 573 Bulong Rd, Bantian Maantang community, Longgang district, Shenzhen, China Product Designation Remote plug-in module Brand Name Ruko Test Model R111 Series Model(s) R112, R113, R114, R115 Difference Description All the series models are the same as the test model except for the model names. Date of receipt of test item Mar. 29, 2024 Date of Test Mar. 29, 2024 to Jun. 24, 2024 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Jack Gui (Project Engineer) Jun. 24, 2024 Reviewed By Calvin Liu (Reviewer) Jun. 24, 2024 Approved By Max Zhang (Authorized Officer) Jun. 24, 2024 Report No.: AGC15705240356FH01 Page 5 of 9 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Bluetooth: 2.402GHz ~ 2.480GHz Other: Hardware Version REN 1.0 Software Version V 1.0 Modulation Type BT_BLE: GFSK Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation FPC Antenna Antenna Gain 1.43dBi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC15705240356FH01 Page 6 of 9 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC15705240356FH01 Page 7 of 9 3.3 Environmental Conditions Normal Conditions Temperature range (°C) …

Text truncated - open the document above for the full version.

shenzhenunitywirelesstechnologyco.,ltd. Address:601-603,Buildingb,ShenzhenQianwanHardScienceandTechnologyIndustrialPark,Nanchang Community,XixiangStreet,Bao'anDistrict,ShenzhenCityTel:0755-23285621Fax:0755-23285621 Antennaspecification customername:ShenzhenRuijieInnovationTechnologyCo.,LTD Customermaterialnumber : Customerproject:Bluetoothradio Thecitymaterialnumber:01.06.0007 productdescription:FPCBTAntennaL=40MM0.81 Date:2024.7.2 Customersignback Researchand development confirmation composition： signature： radiofrequency： approval department Project/EngineeringDepartment： signature： purchasedepartment： shenzhenunitywirelesstechnologyco.,ltd. 第 2 页-共13页 catalogue 一、Cover―――――――――――――――――――――1 二、Index――――――――――――――――――――――2 三、Documentformulation―――――――――――3 四、ProductDrawing―――――――――――――――4 五、ProductParameter――――――――――――――5~8 六、TestEquipment＆Conditions――――――――――9 七、reliabilitytesting―――――――――――10~12 八、Packagespecification―――――――――――――13 shenzhenunitywirelesstechnologyco.,ltd. 第 3 页-共13页 Documentdevelopment/revision/repealoftheCV: edition:dateDatedeveloped/revisedcontentconstituteapproval V1.0 2023.12.15Makeforthefirsttime primaryoffering V2.0 2023.12.18ChangetheshapeandroutingRF V3.0 2024.1.3ChangetheshapeandroutingRF shenzhenunitywirelesstechnologyco.,ltd. 第 4 页-共13页 Engineeringdrawing: shenzhenunitywirelesstechnologyco.,ltd. 第 5 页-共13页 ProductParameter nameofapart; 项目 FPCantenna Model FPCantenna frequency rang（MHz） 2400-2500 frequencyrang （MHz） 2400-2500 Polarization Type LinearpolarizationPolarizationTypeLinearpolarization Gain（dBi） （dBi） 1.43 Gain（dBi） 1.43 VSWRThephysicalprototype shall prevail VSWRThephysicalprototype shallprevail inputimpedenc e（Ω） 50 InputImpedance （Ω） 50 Cablelength （mm） 40MM Cablelength （mm） 40MM CableColour Black/gray CableColour Black/gray ConnectorType blackness ConnectorType blackness Operation temperature （°C） -40~+85 Operation temperature（°C） -40~+85 Storetemperat （°C） -40~+85 Storetemperat （°C） -40~+85 shenzhenunitywirelesstechnologyco.,ltd. 第 6 页-共13页 1.Antennamatching(originalantennamatch) WIFI E1E2E3 N/A0欧N/A 2.AntennaOTApassivetestdata 3. 4.Antennaorientationdiagram 5. shenzhenunitywirelesstechnologyco.,ltd. 第 7 页-共13页 4.Antennapassivestandingwave(S11) 5.Completepicture shenzhenunitywirelesstechnologyco.,ltd. 第 8 页-共13页 on-productinformation customername Itemname/model number projectnamemanufacturer Rijayinnovation01.06.0007Bluetoothradio ShenzhenZhongchengWirelessTechnologyCo., LTD Productcompositioninformation order number Partname Third-partyinspection repor LimitedsubstancecontentPPM remarks datenumber铅（Pb) 镉 (Cd) 汞 (Hg) 六价 铬 多溴联 苯 多溴二苯 醚 1 3M9471（gum）2023/1/4SHAEC2217569205 ○○○○○○ 2 Substrates (copperfoil) 2023/2/15 SHAEC2300104910 6 ○○○○○○ 3 pad(OSP)2023/5/25 A22302308961010 01E ○○○○○○ 4 Wlet(electric gold) 2023/2/15 SHAEC2300104910 6 ○○○○○○ 5 Ink(resistance welding) 2023/7/13ETR23701480 ○○○○○○ 6 Ink(character) 2023/10/13ETR23A00862M01 ○○○○○○ 7 wirestock2023/2/14 CANEC2300011790 4 ○○○○○○ Note： 1.Pleaseindicatewith○,complianceofsixrestrictedsubstancecontent;compliancewith○; non-compliance. shenzhenunitywirelesstechnologyco.,ltd. 第 9 页-共13页 testingfacility: Measurementinstrument:microwavedarkroom,networkanalyzer,standardantenna.Descriptionof microwavedarkroom:ThisisthemicrowavedarkroomsetinShenzhenbyourcompany.Thismicrowave darkroomisafarfieldmeasuringsystem.Thesizeofthedarkroomis7.0mx4.0mx3.0m,and thesizeofthestaticarea(quietzone)is15cmx15cmx15cm. graph.1istheinstrumentsettingofthemicrowaveroomandtheconnectiondiagramofthenetwork analyzer.Thedistancebetweenthetransmittingantenna(thetransmittingantennausedintheroom istrclpa0860800mhz-6ghz)andtheantennatobetested(aut)is1.35meters.Theantennatobe measuredisplacedontherotatingplatform,andtheantennacanbemeasuredbytheAngleofrotation fromthecontroltable.Placethemeasuredantennaontherotatingtableandmeasurethe360degree fieldstrengthdataofeachplane(zyplaneandzxplane).Thentheantennatobetestedisreplaced byastandarddipoleantenna(thestandarddipoleantennamodelusedinthisdarkroomistrcad seriesdipoleantenna800mhz~2500mhz)andthefieldstrengthdataof360degreesismeasuredto convertthegainstandardvalue.Thegainvalueanddirectionmapoftheantennatobemeasuredcan beobtainedthroughtheconversionofequation1. shenzhenunitywirelesstechnologyco.,ltd. 第 10 页-共13页 EnvironmentalandReliabilityTesting projec t Referencestandards,and experimentalconditions Judgmentbasis Sample quantity /bad quantity (PCS) Test/ test the equipme nt collid e GB/T2423.6-1995 Acceleration:200m/s2 Collisionpulseduration: 6ms Numberofcollisionsper minute:40~80times Totalcollisions:400 verticaldirection,front andback Leftandrighthorizontal directioneach300times, atotalof1000times. Itshouldmeetthe requirementsofelectrical characteristics,andthe mechanicalpropertiesare normal,buttheappearance oftouchmarks,whitening andbendinginthe allowablerange. 5/0Collisi on experim ent machine vibrat e GB/T2423.10-1995Testthe FcFrequency:10~30; 30~50Hz; Resonancepoint amplitude:0.35mm Amplitude:0.75mm Duration:X,Y&Z,0.5 hoursperdirection. Cycle:1min; Testfor1hourafter completingthe experiment. Andfirmwarewithout loose,partswithout ruptureorfatigue; Nooriginalfalloff,no solderpointfracture; Theelectricalperformance indexmeetsthe requirementsofthe technicalspecifications; 5/0Vibrati ontest machine retent ivity Verificationconditions: bothendsofthejointand wirearefixedonthe drawingmachinefixture, andthepullingforce returnstozero Verificationmethod: manuallypulltothe productIPEXconnector andwirefalloff >10N5/0Pull force test machine shenzhenunitywirelesstechnologyco.,ltd. 第 11 页-共13页 declin e GB/T2423.8-95 From100cmheighttothe floor10 times.GB/T2423.8-95 1.Nosignificant abnormalityinappearance 2.Afterthetest,the electricalperformance shallmeetthe requirementsofthe electrical characteristics,andthe mechanicalperformance shallbenormal,butthe externalcollisionmarks, whiteningandbending shallbeintheallowable range. 5/0Drop test machine high-t empera ture storag e GB/T2423.2-2001 trialB Amb…

Text truncated - open the document above for the full version.

Page 1 of 52 FCC Test Report Report No.: AGC15705240356FR01 FCC ID : 2AXQL-R111 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Remote plug-in module BRAND NAME : Ruko MODEL NAME : R111, R112, R113, R114, R115 APPLICANT : Shenzhen Ruike Innovation Technology Co., Ltd. DATE OF ISSUE : Jun. 24, 2024 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation Of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC15705240356FR01 Page 2 of 52 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jun. 24, 2024 Valid Initial Release Report No.: AGC15705240356FR01 Page 3 of 52 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ..................................................................................................................... 6 2.2 Test Frequency List ..................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ................................................................................................................. 7 2.4 Test Methodology......................................................................................................................................... 7 2.5 Special Accessories ..................................................................................................................................... 7 2.6 Equipment Modifications ............................................................................................................................. 7 2.7 Antenna Requirement .................................................................................................................................. 7 3. Test Environment ............................................................................................................................................ 8 3.1 Address of the Test Laboratory .................................................................................................................... 8 3.2 Test Facility .................................................................................................................................................. 8 3.3 Environmental Conditions ........................................................................................................................... 9 3.4 Measurement Uncertainty ........................................................................................................................... 9 3.5 List of Equipment Use ............................................................................................................................... 10 4.System Test Configuration ............................................................................................................................ 12 4.1 EUT Configuration ..................................................................................................................................... 12 4.2 EUT Exercise ............................................................................................................................................. 12 4.3 Configuration of Tested System ................................................................................................................ 12 4.4 Equipment Used In Tested System ........................................................................................................... 12 4.5 Summary of Test Results ........................................................................................................................... 13 5. Description of Test Modes ........................................................................................................................... 14 6. Duty Cycle Measurement ............................................................................................................................. 15 7. RF Output Power Measurement .................................................................................................................. 16 7.1 Provisions Applicable ................................................................................................................................. 16 7.2 Measurement Procedure ........................................................................................................................... 16 7.3 Measurement Setup (Block Diagram of Configuration) ............................................................................ 16 7.4 Measurement Result ................................................................................................................................. 17 8. 6dB Bandwidth Measurement ...................................................................................................................... 20 8.1 Provisions Applicable ................................................................................................................................. 20 8.2 Measurement Procedure ........................................................................................................................... 20 8.3 Measurement Setup (Block Diagram of Configuration) ............................................................................ 20 8.4 Measurement Results ................................................................................................................................ 21 9. Power Spectral Density Measurement ........................................................................................................ 23 9.1 Provisions Applicable ...................…

Text truncated - open the document above for the full version.