2AXRY-UBSSENTIASentia

79003 Rev 1.3.1 Analyzer for determining free sulfur dioxide levels USER GUIDE Original Instructions Any software screens, hardware details or test results shown in this manual are for illustrative purposes only. The information shown on your analyzer may differ. The contents of this manual, including all graphics and photographs, are the property of Universal Biosensors. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Universal Biosensors. Universal Biosensors has made every reasonable effort to ensure that all the information contained in this manual is correct at the time of printing. However, Universal Biosensors reserves the right to make any changes necessary without notice as part of ongoing product development. Any correspondence relating to this manual should be addressed to: Universal Biosensors Pty Ltd 1 Corporate Avenue Rowville, 3178, Victoria Australia Sentia™ and the Sentia logo are trademarks of Universal Biosensors. All rights reserved. All other trademarks are property of their respective owners. Patent Pending. 中国发明专利申请，申请号为CN00，专利申请，尚未授权 For all other patent information refer to www.mysentia.com. © 2020 Universal Biosensors Pty Ltd This document is available in electronic format at www.mysentia.com. Table of Contents 1.Introducing Sentia™1 General warnings and precautions1 Your Sentia™ kit2 Intended use of the Sentia™ system2 Key features of the Sentia™ system2 How Sentia™ works3 Quality control3 2.Getting started4 Powering the analyzer4 Power indicators4 Parts of the Sentia™ analyzer5 Sentia™ free sulfur dioxide test strips5 First time use6 Turning the analyzer on and off 6 Registration 6 Setting the date and time (by setting time zone) 7 Connecting to a wireless network 8 Downloading strip calibration data from the internet 8 Guidance on wine types 9 Rosé 9 Other Styles and Non-Table Wine 9 3.Running a test10 Preparing to run a test 10 Warnings 10 How to perform a test 12 4.Cleaning the analyzer16 Spills during sample application or cleaning 16 5.Historical results18 Past results 18 Viewing past test results 18 Viewing past tests that ended in an error 19 Exporting past results to an external device 20 What you’ll need 20 Setting up 20 Connecting to the analyzer from another device 21 Exporting the results 22 Table of Contents 6.Settings24 Analyzer settings 24 Brightness 24 Sound volume 25 Time zone 25 Date and Time format 26 Auto power-off 26 Connectivity (wireless network) 27 Wi-Fi (wireless) Settings 27 Sample settings 27 About 28 Analyzer information 28 Network information 28 7.Troubleshooting30 General troubleshooting30 Warning and error messages30 8. Customer support38 Ordering details38 Software updates38 9.Appendices39 Abbreviations and terms39 Labels and symbols39 Technical specifications41 Legal notices42 Software licences 42 Disposing of the Sentia™ analyzer 42 Disposing of Sentia™ test strips 42 European Union Radio Equipment Declaration 42 Radio emissions and electromagnetic compatibility 43 Sentia™ analyzer – Warranty 44 10.Index46 1 1. Introducing Sentia™ 1.Introducing Sentia™ General warnings and precautions When you use a new vial of strips, you may need to establish a WiFi connection to the Internet so that the latest test strip calibration data can be downloaded (see Page 8). You will need to download calibration data every 3 months or so to stay up to date with the test strips we produce. Always follow the safety procedures and precautions listed here and throughout this user guide. When connecting the analyzer to external devices (such as USB power sources), ensure those devices are in compliance with local safety regulations The power supply that comes with your analyzer is for indoor use only Only use Sentia™ sulfur dioxide test strips Always store Sentia™ test strips in a refrigerator – between 2 °C and 8 °C (35.6 °F and 46.4 °F) Always close the vial lid after a strip has been taken out The Sentia™ Analyzer contains a lithium-ion rechargeable battery which must be treated with care: oDo not attempt to access the battery; if your battery is not performing adequately, contact Customer Support (see Page 38) oDo not place the analyzer near a heat source or in a hot environment (e.g. an automobile parked in the sun) oIf you suspect the battery may have been punctured, crushed or damaged, contact Customer Support (see Page 38) Failure to follow the above battery-care instructions could result in serious injury or death due to a battery catching fire, exploding or leaking 2 Your Sentia™ kit Your Sentia™ kit contains the following items: 1. Analyzer 2. This User Guide 3. Power Supply/ USB Cable 4. Spare Cap Intended use of the Sentia™ system The Sentia™ system can be used to determine free sulfur dioxide (SO 2 ) levels in wine post-fermentation. It is portable and fast, allowing free sulfur dioxide levels to be determined around 30 seconds after sample application. Key features of the Sentia™ system hand-held and portable easy sample application with small sample volume fast result (around 30 seconds from sample application) strip ejection mechanism rich user interface internal battery with power monitoring memory feature (for displaying past test results and errors) export of past test results to an external device 3 1. Introducing Sentia™ How Sentia™ works The Sentia™ system analyzes a sample applied to a Sentia™ test strip * . The sample is applied after the test strip has been inserted into the Sentia™ analyzer's strip port. The sample mixes with dried reagents inside the strip and the analyzer detects the free sulfur dioxide levels. The result is then displayed on the analyzer screen in units of either parts per million or mg/L (user selectable). Up to one thousand records can be stored in the analyzer’s memory. You can list the records and download them to an external device for external review and analys…

Text truncated - open the document above for the full version.

C5266091_X8_Ed.1 1/1 Letter of Authorization < Universal Biosensors > Company: Universal Biosensors Address: 1 Corporate Avenue, Rowville, Victoria, Australia 3178 Product Name: Sentia Model Number: A0295 FCC Identifier: 2AXRY-UBSSENTIA We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Steven Goeby Date: 2020/12/19 Title: Engineering Development Manager Signature of applicant:

C5266091_X10_Ed.2 1/1 Universal Biosensors Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2020/12/19 Subject: Request for Confidentiality FCC ID: 2AXRY-UBSSENTIA To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Steven Goeby Title: Engineering Development Manager ☒

Page 1 of 6 FCC ID: 2AXRY-UBSSENTIA IC: 26613-UBSSENTIA Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT EXTERNAL PHOTOS EUT Photo EUT Photo Page 2 of 6 FCC ID: 2AXRY-UBSSENTIA IC: 26613-UBSSENTIA Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 3 of 6 FCC ID: 2AXRY-UBSSENTIA IC: 26613-UBSSENTIA Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 4 of 6 FCC ID: 2AXRY-UBSSENTIA IC: 26613-UBSSENTIA Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 5 of 6 FCC ID: 2AXRY-UBSSENTIA IC: 26613-UBSSENTIA Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 6 of 6 FCC ID: 2AXRY-UBSSENTIA IC: 26613-UBSSENTIA Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo

1:1 1 CORPORATE AVE, ROWVILLE, VIC 3178, AUSTRALIA TEL: +61 3 9213 9000 FAX: +61 3 9213 9099 VERS. 1.2 SHEET SIZE Sentia Analyzer Label Artwork Universal Biosensors Pty Ltd 79002 DRAWING NO.: TITLE: SCALESHEET 1 OF 1 A4Commercial in Confidence © Copyright 2020 Property of Universal Biosensors Pty Ltd 02-NOV-20 DRAWN DATE: 02-NOV-20 1.2 ADDED FCC ID#, IC#, HVIN, BATTERY CAPACITY, DEVICE DESCRIPTION, ‘DESIGNED BY’, REFERENCE DIMENSIONS / UPDATE TO POWER RATING, SERIAL NUMBER CONFIGURATION 1.122-JUN-20INITIAL RELEASE DESCRIPTIONDATEREV. MODELA0295 SNXXXXXX 79002 V1.2 Made in China IC: 26613-UBSSENTIA FCC ID: 2AXRY-UBSSENTIA HVIN: A0295 Chemical Analysis Instrument UNIVERSAL BIOSENSORS PTY LTD 1 Corporate Avenue, Rowville, Victoria, 3178 Australia Designed by: RATING: 3.7V INPUT: 5V0.9A 0.5A MAX. CAPACITY: 1.85Ah (LI-ION) Designed by: 9 10 37.8mm (Ref) 68.8mm (Ref) MODEL A0295 SNXXXXXX 79002 V1.2 Made in China IC: 26613-UBSSENTIA FCC ID: 2AXRY-UBSSENTIA HVIN: A0295 Chemical Analysis Instrument UNIVERSAL BIOSENSORS PTY LTD 1 Corporate Avenue, Rowville, Victoria, 3178 Australia Designed by: RATING: 3.7V INPUT: 5V0.9A 0.5A MAX. CAPACITY: 1.85Ah (LI-ION) Compliance label location on meter NOTES: 1. All dims. on this drawing are for reference only. Refer to M0676 for dimensional information. 2. Refer to M0676 for material information. 3. All printing to be letter pressed. 4. Broadwell standard font for ‘SENTIA’ branding. 5. Roboto bold font for all other text. 6. White coloured branding, text, and symbols ( CMYK 0/0/0/0) or equivalent. 7. Pantone/PMS 032C C: 0% R: 245 M: 93% G: 51 Y: 76% B: 63 K: 0% Hex#: F5333F. 8. Pantone/PMS 403C C: 46% R: 140 M: 42% G: 131 Y: 48% B: 123 K: 7% Hex#: 8C837B. 9 UDI Barcode printed here in Pantone Black C. Manufacturer to build barcode variably. Remove “FPO” text, once real barcode is created and placed on artwork. UDI Barcode Build Details, see below: 10 Do not print magenta. Barcode Print Details Barcode Dimension: 8.890 mm Square Barcode Type: 2D Data Matrix Verification Grade Required: C Or Better Minimum Module Size: 0.380 mm Maximum Module Size: 0.495 mm Print Requirements: Direct Print Variable Print Details Model: A0295 Serial Controlled By Supplier: XXXXXX Area reserved for Serial Number (S/N), which is variably printed in Pantone Black C. Serial Number will start and increment as follows: XXXXXX is incrementing, for example, 000001, 000002. A0295_Label Sample and Label Location

Page 1 of 4 FCC ID: 2AXRY-UBSSENTIA IC: 26613-UBSSENTIA Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT INTERNAL PHOTOS EUT Photo EUT Photo Page 2 of 4 FCC ID: 2AXRY-UBSSENTIA IC: 26613-UBSSENTIA Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 3 of 4 FCC ID: 2AXRY-UBSSENTIA IC: 26613-UBSSENTIA Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo ANT Page 4 of 4 FCC ID: 2AXRY-UBSSENTIA IC: 26613-UBSSENTIA Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo

Page 2 of 27 Report No.: 201010005SAR-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-SAR-IEEE Std 1528-2013-V1.0 Version Version No. Date Description V1.0 December 18, 2020 Original Page 3 of 27 Report No.: 201010005SAR-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-SAR-IEEE Std 1528-2013-V1.0 Contents Page 1 GENERAL INFORMATION ............................................................................................................................. 4 1.1 STATEMENT OF COMPLIANCE .......................................................................................................... 4 1.2 EUT DESCRIPTION .............................................................................................................................. 5 1.2.1 General Description ...................................................................................................................... 5 1.2.2 Wireless Technologies .................................................................................................................. 5 1.2.3 List of Accessory ........................................................................................................................... 5 1.3 MAXIMUM CONDUCTED POWER ...................................................................................................... 5 1.4 OTHER INFORMATION ........................................................................................................................ 5 1.5 TESTING LOCATION ........................................................................................................................... 5 1.6 TEST FACILITY .................................................................................................................................... 6 1.7 GUIDANCE STANDARD ...................................................................................................................... 7 2 SPECIFIC ABSORPTION RATE (SAR) .......................................................................................................... 8 2.1 INTRODUCTION ................................................................................................................................... 8 2.2 SAR DEFINITION .................................................................................................................................. 8 2.3 SAR LIMITS .......................................................................................................................................... 8 3 SAR MEASUREMENT SYSTEM .................................................................................................................... 9 3.1 SPEAG DASY SYSTEM ....................................................................................................................... 9 3.1.1 Robot ............................................................................................................................................ 9 3.1.2 Probe .......................................................................................................................................... 10 3.1.3 Data Acquisition Electronics (DAE) ............................................................................................ 10 3.1.4 Phantom ...................................................................................................................................... 11 3.1.5 Device Holder ............................................................................................................................. 12 3.1.6 System Validation Dipoles .......................................................................................................... 12 3.2 SAR SCAN PROCEDURE .................................................................................................................. 13 3.2.1 SAR Reference Measurement (drift) .......................................................................................... 13 3.2.2 Area Scan ................................................................................................................................... 13 3.2.3 Zoom Scan ................................................................................................................................. 13 3.2.4 SAR Drift Measurement .............................................................................................................. 14 3.3 TEST EQUIPMENT ............................................................................................................................. 15 3.4 MEASUREMENT UNCERTAINTY ...................................................................................................... 16 3.5 TISSUE DIELECTRIC PARAMETER MEASUREMENT & SYSTEM VERIFICATION ...................... 17 3.5.1 Tissue Simulating Liquids ........................................................................................................... 17 3.5.2 System Check Description ......................................................................................................... 19 3.5.3 Tissue Verification....................................................................................................................... 20 3.5.4 System Verification ..................................................................................................................... 20 4 SAR MEASUREMENT EVALUATION .......................................................................................................... 22 4.1 EUT CONFIGURATION AND SETTING ..…

Text truncated - open the document above for the full version.

Date/Time: 2020/10/26Test Laboratory: UnionTrust System Check_H245 0_10dBm DUT : Dipole 2450 MHz Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: H2450 Medium parameters used: f = 2450 MHz; σ = 1.78 mho/m; ε r = 40.2; ρ = 1000 kg/m 3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(4.61, 4.61, 4.61); Calibrated: 2020/5/9 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2020/5/6 - Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1125 - ; Postprocessing SW: SEMCAD, V1.8 Build 186 system check/Area Scan (51x71x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (interpolated) = 0.733 mW/g system check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 18.0 V/m; Power Drift = 0.120 dB Peak SAR (extrapolated) = 0.769 W/kg SAR(1 g) = 0.482 mW/g; SAR(10 g) = 0.231 mW/g Maximum value of SAR (measured) = 0.558 mW/g 0 dB = 0.558mW/g

Date/Time: 2020/10/26 Test Laboratory: UnionTrust Rear Face_0mm_2412MHz DUT: EUT Communication System: DECT; Frequency: 2412 MHz;Duty Cycle: 1:1 Medium: H2450 Medium parameters used: f = 2412 MHz; σ = 1.72 mho/m; ε r = 40.4; ρ = 1000 kg/m 3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(4.61, 4.61, 4.61); Calibrated: 2020/5/9 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2020/5/6 - Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1125 - ; Postprocessing SW: SEMCAD, V1.8 Build 186 Test/Area Scan (171x51x1): Measuremen t grid: dx=12mm, dy=12mm Maximum value of SAR (interpolated) = 0.021 mW/g Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.90 V/m; Power Drift = 0.166 dB Peak SAR (extrapolated) = 0.136 W/kg SAR(1 g) = 0.105 mW/g; SAR(10 g) = 0.060 mW/g Maximum value of SAR (measured) = 0.163 mW/g 0 dB = 0.163mW/g

FCC ID: 2AXRY-UBSSENTIA IC ID: 26613-UBSSENTIA Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-SAR-IEEE Std 1528-2013-V1.0_Appendix D <Photographs of EUT> FCC ID: 2AXRY-UBSSENTIA IC ID: 26613-UBSSENTIA Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-SAR-IEEE Std 1528-2013-V1.0_Appendix D <Antenna Location> The separation distance for antenna to edge: Antenna Overall Diagonal (mm) Display Diagonal (mm) To Left Side (mm) To Right Side (mm) To Top Side (mm) To Bottom Side (mm) WWAN Ant-0 140 72 55 10 58 75 FCC ID: 2AXRY-UBSSENTIA IC ID: 26613-UBSSENTIA Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-SAR-IEEE Std 1528-2013-V1.0_Appendix D <Photographs of SAR Setup> Front Face of EUT with 0 cm Gap Rear Face of EUT with 0 cm Gap Left Side of EUT with 0 cm Gap Right Side of EUT with 0 cm Gap Top Side of EUT with 0 cm Gap Bottom Side of EUT with 0 cm Gap

Page 2 of 49 Report No.: 201010007RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.0 Version Version No. Date Description V1.0 December 18, 2020 Original Page 3 of 49 Report No.: 201010007RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.0 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.2.1 GENERAL DESCRIPTION OF EUT ............................................................................................................ 4 1.2.2 DESCRIPTION OF ACCESSORIES .............................................................................................................. 4 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD ................................................................................. 4 1.4 OTHER INFORMATION ......................................................................................................................................... 5 1.5 DESCRIPTION OF SUPPORT UNITS ...................................................................................................................... 5 1.6 TEST LOCATION ................................................................................................................................................. 5 1.7 TEST FACILITY ................................................................................................................................................... 6 1.8 DEVIATION FROM STANDARDS ............................................................................................................................ 6 1.9 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 6 1.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 6 1.11 MEASUREMENT UNCERTAINTY ........................................................................................................................... 6 2. TEST SUMMARY ...................................................................................................................................................... 7 3. EQUIPMENT LIST .................................................................................................................................................... 8 4. TEST CONFIGURATION .......................................................................................................................................... 9 4.1 ENVIRONMENTAL CONDITIONS FOR TESTING ........................................................................................................ 9 4.1.1 NORMAL OR EXTREME TEST CONDITIONS ............................................................................................... 9 4.1.2 RECORD OF NORMAL ENVIRONMENT ....................................................................................................... 9 4.2 TEST CHANNELS ............................................................................................................................................... 9 4.3 EUT TEST STATUS .......................................................................................................................................... 10 4.4 PRE-SCAN ....................................................................................................................................................... 10 4.5 TEST SETUP .................................................................................................................................................... 11 4.5.1 FOR RADIATED EMISSIONS TEST SETUP................................................................................................. 11 4.5.2 FOR CONDUCTED EMISSIONS TEST SETUP ............................................................................................ 12 4.5.3 FOR CONDUCTED RF TEST SETUP ........................................................................................................ 13 4.6 SYSTEM TEST CONFIGURATION ........................................................................................................................ 13 4.7 DUTY CYCLE ................................................................................................................................................... 14 5. RADIO TECHNICAL REQUIREMENTS SPECIFICATION .................................................................................... 16 5.1 REFERENCE DOCUMENTS FOR TESTING ............................................................................................................ 16 5.2 ANTENNA REQUIREMENT ............................................................................…

Text truncated - open the document above for the full version.