2AXVM-HM-TQ50Thermal lmage Scope/Thermal Monocular

Thermal Image Scope Quick Start Guide Thermal Image Scope English 5 Wärmebild-Zielfernrohr Deutsch 13 Monoculaire à imagerie thermique Français 22 Mira telescópica térmica Español 31 Mira de Visão Térmica Português 39 Termocannocchiale Italiano 48 Termovizní zaměřovač Čeština 56 Termografický objektív Slovenčina 64 Kamera termowizyjna Polski 72 Éjjellátó távcső Magyar 81 Lunetă cu termoviziune Română 89 Thermische beeldscoop Nederlands 97 Termisk kikkertkamera Dansk 106 Termisk bildeløsning Norsk 114 Lämpötähtäin Suomi 121 Kikarsikte med värmeavbildning Svenska 129 Тепловизор Русский 137 Termal Görüntüleme Cihazı Türkçe 146 サーマルイメージスコープ 日本語 154 열화상 스코프 영어 164 熱像儀 繁體中文 174 1 A 2 B C ﹢ 3 D 4 E 5 English 1. Brief Description The thermal image scope is equipped with high-sensitivity IR detector, and adopts advanced thermal imaging technology, to get clear view in poor visibility or dark environment. It helps to view the target and measure the distance. The device is mainly applied to outdoor scenarios such as hunting, law enforcement, etc. The device can capture snapshots, record videos, and set parameters by T- Vision App after being connected to your phone via hotspot. Search the T-Vision on App Store (iOS System) or Google Play™ (Android System) to download it, or scan the QR code to download and install the App. Android System iOS System 2. Appearance There are two types of thermal image scopes. Please take the actual product for reference. The buttons, components and interface of the two types of thermal image scopes are the same. Component & Interface (Page 1 – A) No. Component Function 1 Lens Cover Protect the lens. 2 Objective Lens Adjust the distance between the lens and the sensor to view the target much clearer. 3 Data Connect with the output cable. 6 Exchange Interface 4 Fixing Ring Fix the eyepiece. 5 Battery Compartment Install the battery in it. 6 Bolt Loosen the bolt to install the batteries. 7 Focus Ring Adjust the sight view. 8 Eyepiece View the target. 9 Knob Secure the device to the rail. Button (Page 2 – B) No. Icon Button Description 1 Power ● Press: Standby Mode/Wake up Device ● Hold: Power On/Off 2 Capture ● Press: Capture ● Hold: Start/Stop Record Video 3 Shutter ● Press: Correct Non-uniformity of Display 4 Zoom ● Press: Switch Digital Zoom ● Hold: Enable/Disable Reticle 5 Menu ● Press: Enable/Disable OSD ● Hold: Menu Operation 6 Mode ● Press: Switch Palettes 3. Install Battery (Page 2 – C) Steps 1. Turn the bolt anticlockwise to loosen it. 2. Insert the batteries as the positive and negative marks indicate. Note:  Take the battery away if you do not use the device for a long time. 7  Select the correct battery voltage in the device menu, or it may cause abnormal shutdown. 4. Install Rail (Page 3 – D) Steps 1. Install the device to the rail as the black arrow shows. 2. Insert and tighten the screws. 3. Tighten the knobs to secure the device. Note:  Turn off the device first.  Use the non-dust cloth to clean the device base and the rail. 5. Connect Device (Page 4 – E) Steps 1. Turn on the device and make sure the hotspot function is disabled. 2. Lift the cover of data exchange interface. 3. Connect the device and power adapter with a type-C cable to power on the device. Alternatively, connect the device and PC to export files. User Manual Legal Information © 2021 Hangzhou Microimage Software Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the HIKMICRO 8 website (www.hikmicrotech.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks Acknowledgement and other HIKMICRO’s trademarks and logos are the properties of HIKMICRO in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. LEGAL DISCLAIMER TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKMICRO MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKMICRO BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKMICRO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKMICRO SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKMICRO WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR 9 USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ILLEGAL HUNTING ANIMALS, INVASION OF PRIVACY OR ANY OTHER PURPOSE WHICH IS ILLEGAL OR DETRIMENTAL TO THE PUBLIC INTEREST. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED …

Text truncated - open the document above for the full version.

Applicant Declaration Applicant Declaration Rev: 0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Hangzhou Microimage Software Co., Ltd. Address Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict,Binjiang District, Hangzhou, China Grantee Code 2AXVM FCC ID 2AXVM-HM-TQ50 Authorized Contact Name Wen Fang Contact Email [email protected] Contact Phone 17280719017 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applic able rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specifi ed under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certific ation and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has r ead, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title- 47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 2022/04/06 Print Name: Wen Fang Title: Certification Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Hangzhou Microimage Software Co., Ltd. Current Date 2022-04-06 To : SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Dear Sir/Madam, Subject: Declaration Letter about Identity of Products *WE Hangzhou Microimage Software Co., Ltd., HEREBY DECLARED THAT Product Description: Thermal lmage Scope/Thermal Monocular Model No.: HM-TR13-35XG/W-TH35P;HM-TR13-35XG/W-TH35PC;HM-TR13-35XG/ CW-TH35PC;HM-TR16-35XG/W-TQ35;HM-TR16-35XG/W-TQ35C;HM-T R16-35XG/CW-TQ35C;HM-TR16-50XG/W-TQ50C;HM-TR16-50XG/CW-T Q50C Manufacturer’s Name: Hangzhou Microimage Software Co., Ltd. Manufacturer’s Address: Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict, Binjiang District, Hangzhou, China *Except that the model number and appearance deviation, are identical with the original product as follows: Note: The definition of identical should be “electrically identical”. A device will be considered to be electrically identical if no changes are made to the devices’ schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identic al. Model No.: HM-TR16-50XG/W-TQ50 Manufacturer’s Name: Hangzhou Microimage Software Co., Ltd. Manufacturer’s Address: Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict, Binjiang District, Hangzhou, China Sincerely, Signature: Printed Name : Wen Fang Position/Title : Certification Engineer Contact Number: 18858952085

Hangzhou Microimage Software Co., Ltd. Date: 2022-04-06 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AXVM-HM-TQ50 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certific ation, as specified by SGS North America, Inc., still resides with Hangzhou Microimage Software Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Wen Fang Title: Certification Engineer Signature: On behalf of Company: Hangzhou Microimage Software Co., Ltd. Telephone: 17280719017

Hangzhou Microimage Software Co., Ltd. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Hangzhou Microimage Software Co., Ltd. Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict,Binjiang District, Hangzhou, China Regarding: Confidentiality Request regarding application for FCC ID : 2AXVM-HM-TQ50 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissio n’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary in formation not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Wen Fang Title : Certification Engineer Company Name: Hangzhou Microimage Software Co., Ltd.

Compliance Certification Services (Kunshan) Inc. Page: 1 of 4 External Photos Applicant: Hangzhou Microimage Software Co.,Ltd Address of Applicant: Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict,Binjiang District, Hangzhou, Zhejiang Equipment Under Test (EUT): Product Name: Thermal lmage Scope/Thermal Monocular Model No.: HM-TR16-50XG/W-TQ50 Compliance Certification Services (Kunshan) Inc. Page: 2 of 4 Compliance Certification Services (Kunshan) Inc. Page: 3 of 4 Compliance Certification Services (Kunshan) Inc. Page: 4 of 4 End

Model: HM-TR16-50XG/W-TQ50 Model: HM-TR13-35XG/W-TH35P Model: HM-TR13-35XG/W-TH35PC Model: HM-TR13-35XG/CW-TH35PC Model: HM-TR16-35XG/W-TQ35 Model: HM-TR16-35XG/W-TQ35C Model: HM-TR16-35XG/CW-TQ35C Model: HM-TR16-50XG/W-TQ50C Model: HM-TR16-50XG/CW-TQ50C Label location Remark：It’s hard to put FCC statement on the product due to device’s irregular appearance. FCC statement will be placed in the user manual which the device is marketed.

Compliance Certification Services (Kunshan) Inc. Page: 1 of 15 Internal Photos Applicant: Hangzhou Microimage Software Co.,Ltd Address of Applicant: Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict,Binjiang District, Hangzhou, Zhejiang Equipment Under Test (EUT): Product Name: Thermal lmage Scope/Thermal Monocular Model No.: HM-TR16-50XG/W-TQ50 Compliance Certification Services (Kunshan) Inc. Page: 2 of 15 Compliance Certification Services (Kunshan) Inc. Page: 3 of 15 Compliance Certification Services (Kunshan) Inc. Page: 4 of 15 Compliance Certification Services (Kunshan) Inc. Page: 5 of 15 Compliance Certification Services (Kunshan) Inc. Page: 6 of 15 Compliance Certification Services (Kunshan) Inc. Page: 7 of 15 Compliance Certification Services (Kunshan) Inc. Page: 8 of 15 Compliance Certification Services (Kunshan) Inc. Page: 9 of 15 Compliance Certification Services (Kunshan) Inc. Page: 10 of 15 Compliance Certification Services (Kunshan) Inc. Page: 11 of 15 Compliance Certification Services (Kunshan) Inc. Page: 12 of 15 Compliance Certification Services (Kunshan) Inc. Page: 13 of 15 Compliance Certification Services (Kunshan) Inc. Page: 14 of 15 Compliance Certification Services (Kunshan) Inc. Page: 15 of 15 End

Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220100007002 Page: 1 of 12 Eric Lin Laboratory Manager 1 Cover Page RF Exposure Evaluation Report Application No.: KSCR2201000070AT FCC ID: 2AXVM-HM-TQ50 IC: 26572-HMTQ50 Applicant: Hangzhou Microimage Software Co.,Ltd Address of Applicant: Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict,Binjiang District, Hangzhou, Zhejiang Manufacturer: Hangzhou Microimage Software Co.,Ltd Address of Manufacturer: Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict,Binjiang District, Hangzhou, Zhejiang Factory: Hangzhou Microimage Intelligent Technology Co., Ltd. Address of Factory: Floor 2, Building A1, 299 Qiushi Road, Tonglu Economic Development Zone, Tonglu County, Hangzhou City, Zhejiang Province Equipment Under Test (EUT): EUT Name: Thermal lmage Scope/Thermal Monocular Model No.: HM-TR16-50XG/W-TQ50;HM-TR13-35XG/W-TH35P;HM-TR13-35XG/W- TH35PC;HM-TR13-35XG/CW-TH35PC;HM-TR16-35XG/W-TQ35;HM- TR16-35XG/W-TQ35C;HM-TR16-35XG/CW-TQ35C;HM-TR16-50XG/W- TQ50C;HM-TR16-50XG/CW-TQ50C Trade mark: Hikmicro Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 RSS-102 Issue 5 Amendment 1 (February 2, 2021) Date of Receipt: 2022-01-13 Date of Test: 2022-03-21 to 2022-03-22 Date of Issue: 2022-03-22 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220100007002 Page: 2 of 12 Revision Record Version Description Date Remark 00 Original 2022-03-22 / Authorized for issue by: Tommie Tang / Project Engineer Eric Lin / Reviewer Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220100007002 Page: 3 of 12 2 Contents Page 1 COVER PAGE .................................................................................................................................... 1 2 CONTENTS ........................................................................................................................................ 3 3 GENERAL INFORMATION ................................................................................................................ 4 3.1 GENERAL DESCRIPTION OF E.U.T. ................................................................................................ 4 3.2 DETAILS OF E.U.T. ....................................................................................................................... 4 3.3 TEST LOCATION ............................................................................................................................ 6 3.4 TEST FACILITY .............................................................................................................................. 6 4 FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS .......................................................... 7 4.1 BLANKET 1 MW BLANKET EXEMPTION ........................................................................................... 7 4.2 MPE-BASED EXEMPTION .............................................................................................................. 7 4.3 SAR-BASED EXEMPTION ............................................................................................................... 8 5 MEASUREMENT AND CALCULATION .......................................................................................... 11 5.1 MAXIMUM TRANSMIT POWER ....................................................................................................... 11 5.2 RF EXPOSURE CALCULATION ...................................................................................................... 11 Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220100007002 Page: 4 of 12 3 General Information 3.1 General Description of E.U.T. Power supply: DC 3V CR123A * 2 or DC 3.7V rechargeable Li-on battery * 2 or DC 5V by USB port Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Test voltage: AC 120V/60Hz Antenna Gain: -1dBi (Provided by the manufacturer) Antenna Type: PCB Antenna Channel Spacing: 5MHz Modulation Type: 802.11b: DSSS (CCK, DQPSK, DBPSK) 802.11g/n: OFDM (64QAM, 16QAM, QPSK, BPSK) Number of Channels: 802.11b/g/n(HT20):11 802.11n(HT40):7 Operation Frequency: Firmware Version: Serial Number: 802.11b/g/n(HT20): 2412MHz to 2462MHz 802.11n(HT40): 2422MHz to 2452MHz V5.5.38 S3000412817 3.3 Separation Distance Separation distance between the antenna to person (R): Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220100007002 Page: 5 of 12 Remark 1: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. Remark 2: The distance between WIFI antenna and handle of the EUT is 5mm for hand. Remark 3: The distance between WIFI antenna and the eyepiece is 52mm for head. Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220100007002 Page: 6 of 12 3.4 Test Location All tests were performed at: Compliance Certification Services (Kunshan) Inc. No.10 Weiye Rd, Innovation park, Eco&Tec, Development Zone, Kunshan City, Jiangsu, China. Tel: +86 512 5735 5888 Fax: +86 512 5737 0818 No tests were sub-contracted. 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L4354) CNAS has accredited Compliance Certification Services (Kunshan) Inc. to ISO/IEC 17025:2017 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA (Certificate No. 2541.01) Compliance Certification Services (Kunshan) Inc. is accredited by the American Association for Lab…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Page: 1 of 53 Appendix A for KSCR220100007001 1. Duty Cycle 1.1 Ant1 1.1.1 Test Result Ant1 Mode TX Type Frequency (MHz) T_on (ms) Period (ms) Duty Cycle (%) Duty Cycle Correction Factor (dB) Max. DC Variation (%) 802.11b SISO 2412 100.000 100.000 100.00 0.00 0.00 2437 100.000 100.000 100.00 0.00 0.00 2462 100.000 100.000 100.00 0.00 0.00 802.11g SISO 2412 100.000 100.000 100.00 0.00 0.00 2437 100.000 100.000 100.00 0.00 0.00 2462 100.000 100.000 100.00 0.00 0.00 802.11n (HT20) SISO 2412 100.000 100.000 100.00 0.00 0.00 2437 100.000 100.000 100.00 0.00 0.00 2462 100.000 100.000 100.00 0.00 0.00 802.11n (HT40) SISO 2422 100.000 100.000 100.00 0.00 0.00 2437 100.000 100.000 100.00 0.00 0.00 2452 100.000 100.000 100.00 0.00 0.00 Compliance Certification Services (Kunshan) Inc. Page: 2 of 53 1.1.2 Test Graph 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 3 of 53 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 4 of 53 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 5 of 53 802.11n(HT20)_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 6 of 53 802.11n(HT20)_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 7 of 53 802.11n(HT40)_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 8 of 53 2. Bandwidth 2.1 OBW 2.1.1 Test Result Mode TX Type Frequency (MHz) Ant 99% Occupied Bandwidth (MHz) Verdict Result 802.11b SISO 2412 1 13.457 Pass 2437 1 13.432 Pass 2462 1 13.427 Pass 802.11g SISO 2412 1 17.538 Pass 2437 1 17.598 Pass 2462 1 17.624 Pass 802.11n (HT20) SISO 2412 1 18.467 Pass 2437 1 18.449 Pass 2462 1 18.453 Pass 802.11n (HT40) SISO 2422 1 36.843 Pass 2437 1 36.783 Pass 2452 1 36.836 Pass Compliance Certification Services (Kunshan) Inc. Page: 9 of 53 2.1.2 Test Graph 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 10 of 53 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 11 of 53 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 12 of 53 802.11n(HT20)_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 13 of 53 802.11n(HT20)_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 14 of 53 802.11n(HT40)_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 15 of 53 2.2 6dB BW 2.2.1 Test Result Mode TX Type Frequency (MHz) Ant 6dB Bandwidth (MHz) Verdict Result Limit 802.11b SISO 2412 1 9.104 >=0.5 Pass 2437 1 9.105 >=0.5 Pass 2462 1 9.103 >=0.5 Pass 802.11g SISO 2412 1 16.597 >=0.5 Pass 2437 1 16.605 >=0.5 Pass 2462 1 16.606 >=0.5 Pass 802.11n (HT20) SISO 2412 1 17.813 >=0.5 Pass 2437 1 17.821 >=0.5 Pass 2462 1 17.820 >=0.5 Pass 802.11n (HT40) SISO 2422 1 36.511 >=0.5 Pass 2437 1 36.508 >=0.5 Pass 2452 1 36.506 >=0.5 Pass Compliance Certification Services (Kunshan) Inc. Page: 16 of 53 2.2.2 Test Graph 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 17 of 53 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 18 of 53 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 19 of 53 802.11n(HT20)_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 20 of 53 802.11n(HT20)_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 21 of 53 802.11n(HT40)_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 22 of 53 3. Maximum Conducted Output Power 3.1 Power 3.1.1 Test Result Mode TX Type Frequency (MHz) Maximum Average Conducted Output Power (dBm) Verdict Ant1 Limit 802.11b SISO 2412 7.16 <=30 Pass 2437 7.74 <=30 Pass 2462 7.67 <=30 Pass 802.11g SISO 2412 7.84 <=30 Pass 2437 7.70 <=30 Pass 2462 7.69 <=30 Pass 802.11n (HT20) SISO 2412 7.71 <=30 Pass 2437 7.56 <=30 Pass 2462 7.57 <=30 Pass 802.11n (HT40) SISO 2422 7.22 <=30 Pass 2437 7.57 <=30 Pass 2452 7.68 <=30 Pass Note1: Antenna Gain: Ant1: -1.00dBi; Compliance Certification Services (Kunshan) Inc. Page: 23 of 53 3.1.2 Test Graph 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 24 of 53 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 25 of 53 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 26 of 53 802.11n(HT20)_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 27 of 53 802.11n(HT20)_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 28 of 53 802.11n(HT40)_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant1 (SISO)_NTNV Compliance Certification Services (Kunshan) Inc. Page: 29 of 53 4. Maximum Power Spectral Density 4.1 PSD 4.1.1 Test Result Mode TX T…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220100007001 Page: 1 of 83 Eric Lin Laboratory Manager TEST REPORT Application No.: KSCR2201000070AT FCC ID: 2AXVM-HM-TQ50 IC: 26572-HMTQ50 Applicant: Hangzhou Microimage Software Co.,Ltd Address of Applicant: Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict,Binjiang District, Hangzhou, Zhejiang Manufacturer: Hangzhou Microimage Software Co.,Ltd Address of Manufacturer: Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict,Binjiang District, Hangzhou, Zhejiang Factory: Hangzhou Microimage Intelligent Technology Co., Ltd. Address of Factory: Floor 2, Building A1, 299 Qiushi Road, Tonglu Economic Development Zone, Tonglu County, Hangzhou City, Zhejiang Province Equipment Under Test (EUT): EUT Name: Thermal lmage Scope/Thermal Monocular Model No.: HM-TR16-50XG/W-TQ50;HM-TR13-35XG/W-TH35P;HM-TR13-35XG/W- TH35PC;HM-TR13-35XG/CW-TH35PC;HM-TR16-35XG/W-TQ35;HM- TR16-35XG/W-TQ35C;HM-TR16-35XG/CW-TQ35C;HM-TR16-50XG/W- TQ50C;HM-TR16-50XG/CW-TQ50C♣ ♣ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade mark: Hikmicro Standard(s) : 47 CFR Part 15, Subpart C 15.247 RSS-247 Issue 2, February 2017 RSS-Gen Issue 5 Amendment 2 (February 2021) Date of Receipt: 2022-01-13 Date of Test: 2022-03-21 to 2022-03-22 Date of Issue: 2022-03-22 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220100007001 Page: 2 of 83 Revision Record Version Description Date Remark 00 Original 2022-03-22 / Authorized for issue by: Tommie Tang / Project Engineer Eric Lin / Reviewer Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220100007001 Page: 3 of 83 2 Test Summary Radio Spectrum Technical Requirement Item FCC Requirement IC Requirement Method Result Antenna Requirement 47 CFR Part 15, Subpart C 15.203 & 15.247(c) RSS-Gen Cl ause 6.8 N/A Customer Declaration N/A: Not applicable Radio Spectrum Matter Part Item FCC Requirement IC Requirement Method Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.207 RSS-Gen Clause 8.8 ANSI C63.10 (2013) Section 6.2 Pass Minimum 6dB Bandwidth 47 CFR Part 15, Subpart C 15.247a(2) RSS-247 Clause 5.2(a) ANSI C63.10 (2013) Section 11.8.1 Pass Conducted Average Output Power 47 CFR Part 15, Subpart C 15.247(b)(3) RSS-247 Clause 5.4(d) ANSI C63.10 (2013) Secti on 11.9.2 Pass Power Spectrum Density 47 CFR Part 15, Subpart C 15.…

Text truncated - open the document above for the full version.