2AXVM-HM-TR13Thermal Image Scope

Thermal Image Scope User Manual Thermal Image Scope User Manual i Legal Information © 2020 Hangzhou Microimage Software Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the HIKMICRO website (www.hikmicrotech.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks Acknowledgement and other HIKMICRO’s trademarks and logos are the properties of HIKMICRO in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. LEGAL DISCLAIMER TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKMICRO MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKMICRO BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKMICRO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKMICRO SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKMICRO WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN Thermal Image Scope User Manual ii RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. Thermal Image Scope User Manual iii Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for complianc e could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV techniciaan for help FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info Thermal Image Scope User Manual iv 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. 1.This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: this device may not cause interferen…

Text truncated - open the document above for the full version.

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Hangzhou Microimage Software Co., Ltd. Address Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict,Binjiang District, Hangzhou, Zhejiang Grantee Code 2AXVM FCC ID 2AXVM-HM-TR13 Authorized Contact Name Jianyi Li Contact Email [email protected] Contact Phone 18858952085 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date:2020/12/19 Print Name: Jianyi Li Title: Testing and Certification Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Hangzhou Microimage Software Co., Ltd. Current Date : 2020-12-19 To: SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Dear Sir/Madam, Subject: Declaration Letter about Identity of Products *WE (Hangzhou Microimage Software Co., Ltd.) HEREBY DECLARED THAT Product Description Thermal Image Scope Model No. HM-TR13-35XF/CW-TH35C,HM-TR13-25XF/W-TH25,HM-TR13-35XF/W-T H35UHK,HM-TR13-35XF/CW-TH35CUHK,HM-TR13-25XF/W-TH25UHK,H M-TR13-35XF/W-TH35CKV,HM-TR13-35XF/CW-TH35CCKV,HM-TR13-25 XF/W-TH25CKV,HM-TR13-35XF/W-TH35UVS,HM-TR13-35XF/CW-TH35C UVS,HM-TR13-25XF/W-TH25UVS,HM-TR13-35XF/W-TH35KVO,HM-TR13 -35XF/CW-TH35CKVO,HM-TR13-25XF/W-TH25KVO,HM-TR13-35XF/W-T H35HUN,HM-TR13-35XF/CW-TH35CHUN,HM-TR13-25XF/W-TH25HUN Manufacturer’s Name Hangzhou Microimage Software Co., Ltd. Manufacturer’s Address Room 313, Unit B, Building 2,399 Danfeng Road,Xixing Subdistrict,Binjiang District,Hangzhou,Zhejiang *Except that the model number, trade name and appearance deviation, are identical with the original product as follows: Note: The definition of identical should be “electrically identical”. A device will be considered to be electrically identical if no changes are made to the devices’ schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical. Model No. (型号): HM-TR13-35XF/W-TH35 Manufacturer’s Name (生产商名称): Hangzhou Microimage Software Co., Ltd. Manufacturer’s Address（生产商商地址): Room 313, Unit B, Building 2,399 Danfeng Road,Xixing Subdistrict,Binjiang District,Hangzhou,Zhejiang Sincerely, Signature (签字): Printed Name (姓名): Jianyi Li Position/Title (职位): Testing and Certification Engineer Contact Number (联系电话): 18858952085

Hangzhou Microimage Software Co., Ltd. Date: 2020-12-19 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AXVM-HM-TR13 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Microimage Software Co., Ltd.. This authorization is valid until further written notice from the applicant. Name (Printed): Jianyi Li Title: Testing and Certification Engineer Signature: On behalf of Company: Hangzhou Microimage Software Co., Ltd. Telephone: 18858952085

Hangzhou Microimage Software Co., Ltd. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Hangzhou Microimage Software Co., Ltd. Room 313,Unit B,Building 2,399 Danfeng Road,Xixing Subdistrict,Binjiang District,Hangzhou,Zhejiang Regarding: Confidentiality Request regarding application for FCC ID : 2AXVM-HM-TR13 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissio n’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary in formation not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Jianyi Li Title : Testing and Certification Engineer Company Name: Hangzhou Microimage Software Co., Ltd.

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 4 Page 1 of 4 External Photos Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Applicant: No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Equipment Under Test (EUT): Product Name: Thermal Image Scope Model No.: HM-TR13-35XF/W-TH35 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 4 Page 2 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 4 Page 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 4 of 4 Page 4 of 4 End

Remark：It’s hard to put FCC statement on the product due to device’s irregular appearance. FCC statement will be placed in the user manual which the device is marketed. Label location

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 10 Page 1 of 10 Internal Photos Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Applicant: No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Equipment Under Test (EUT): Product Name: Thermal Image Scope Model No.: HM-TR13-35XF/W-TH35 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 10 Page 2 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 10 Page 3 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 4 of 10 Page 4 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 5 of 10 Page 5 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 6 of 10 Page 6 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 7 of 10 Page 7 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 8 of 10 Page 8 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 9 of 10 Page 9 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 10 of 10 Page 10 of 10 End

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200600527102 Page: 1 of 9 Parlam Zhan E&E Section Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. 1 Cover Page RF Exposure Evaluation Report Application No.: SHEM2006005271CR FCC ID: 2AXVM-HM-TR13 IC: 26572-HMTR13 Applicant: Hangzhou Microimage Software Co., Ltd. Address of Applicant: Room 313,Unit B,Building 2,399 Danfeng Road,Xixing Subdistrict,Binjiang District,Hangzhou,Zhejiang Manufacturer: Hangzhou Microimage Software Co., Ltd. Address of Manufacturer: Room 313,Unit B,Building 2,399 Danfeng Road,Xixing Subdistrict,Binjiang District,Hangzhou,Zhejiang Factory: Hangzhou Microimage Intelligent Technology Co.,Ltd. Address of Factory: Floor 2,Building A1,299 Qiushi Road,Tonglu Economic Development Zone,Tonglu County,Hangzhou City,Zhejiang Province Equipment Under Test (EUT): EUT Name: Thermal Image Scope Model No.: HM-TR13-35XF/W-TH35 Add Model No.: HM-TR13-35XF/CW-TH35C,HM-TR13-25XF/W-TH25,HM-TR13-35XF/W- TH35UHK,HM-TR13-35XF/CW-TH35CUHK,HM-TR13-25XF/W- TH25UHK,HM-TR13-35XF/W-TH35CKV,HM-TR13-35XF/CW- TH35CCKV,HM-TR13-25XF/W-TH25CKV,HM-TR13-35XF/W- TH35UVS,HM-TR13-35XF/CW-TH35CUVS,HM-TR13-25XF/W- TH25UVS,HM-TR13-35XF/W-TH35KVO,HM-TR13-35XF/CW- TH35CKVO,HM-TR13-25XF/W-TH25KVO,HM-TR13-35XF/W- TH35HUN,HM-TR13-35XF/CW-TH35CHUN,HM-TR13-25XF/W-TH25HUN Trade mark: HIKMICRO Standard(s) : FCC Rules 47 CFR §2.1093 KDB447498 D01 General RF Exposure Guidance v06 RSS-102 Issue 5 (March 2015) Date of Receipt: 2020-06-29 Date of Test: 2020-07-10 to 2020-07-20 Date of Issue: 2020-11-23 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200600527102 Page: 2 of 9 For IC Model No: HM-TR13-35XF/W-TH35,HM-TR13-35XF/CW-TH35C,HM-TR13-25XF/W-TH25 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200600527102 Page: 3 of 9 Revision Record Version Description Date Remark 00 Original 2020-11-23 / Authorized for issue by: Micheal Niu / Project Engineer Parlam Zhan / Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200600527102 Page: 4 of 9 2 Contents Page 1 COVER PAGE ................................................................................................................................................. 1 2 CONTENTS ..................................................................................................................................................... 4 3 GENERAL INFORMATION ......................................................................................................................... 5 3.1 GENERAL DESCRIPTION OF E.U.T. ................................................................................................................ 5 3.2 TEST LOCATION ............................................................................................................................................. 6 3.3 TEST FACILITY .............................................................................................................................................. 6 4 TEST STANDARDS AND LIMITS ............................................................................................................... 7 4.1 DUT ANTENNA LOCATIONS .......................................................................................................................... 7 4.2 FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS: ................................................................................ 7 4.3 IC RADIOFREQUENCY RADIATION EXPOSURE LIMITS ..................................................................................... 8 5 MEASUREMENT AND CALCULATION ................................................................................................... 9 5.1 MAXIMUM TRANSMIT POWER ........................................................................................................................ 9 5.2 MPE CALCULATION ...................................................................................................................................... 9 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200600527102 Page: 5 of 9 3 General Information 3.1 General Description of E.U.T. Power supply: DC 3.0V by Lithium battery Serial Number: C25D03890 Firmware Version: V1.29 Number of Channels: 802.11b/g/n(HT20):11 802.11n(HT40):7 Antenna Gain: -1.0dBi Antenna Type: FPC Antenna Channel Spacing: 5MHz Modulation Type: 802.11b: DSSS (CCK, DQPSK, DBPSK) 802.11g/n: OFDM (64QAM, 16QAM, QPSK, BPSK) Operation Frequency: 802.11b/g/n(HT20): 2412MHz to 2462MHz 802.11n(HT40): 2422MHz to 2452MHz SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200600527102 Page: 6 of 9 3.2 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch 588 West Jindu Road, Xinqiao, Songjiang, 201612 Shanghai, China. Tel: +86 21 6191 5666 Fax: +86 21 6191 5678 3.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L0599) CNAS has accredited SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. to ISO/IEC 17025:2017 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing an…

Text truncated - open the document above for the full version.

Appendix A for SHEM200600527101 1.6dB Bandwidth Test Mode Test Channel Ant EBW[MHz] Limit Verdict 11B 2412 Ant1 10.05 0.5 PASS 11B 2437 Ant1 10.07 0.5 PASS 11B 2462 Ant1 10.06 0.5 PASS 11G 2412 Ant1 16.56 0.5 PASS 11G 2437 Ant1 16.56 0.5 PASS 11G 2462 Ant1 16.55 0.5 PASS 11N20SISO 2412 Ant1 17.76 0.5 PASS 11N20SISO 2437 Ant1 17.79 0.5 PASS 11N20SISO 2462 Ant1 17.78 0.5 PASS 11N40SISO 2422 Ant1 36.10 0.5 PASS 11N40SISO 2437 Ant1 36.04 0.5 PASS 11N40SISO 2452 Ant1 36.32 0.5 PASS 6dB Bandwidth_11B_2412_Ant1 6dB Bandwidth_11B_2437_Ant1 6dB Bandwidth_11B_2462_Ant1 6dB Bandwidth_11G_2412_Ant1 6dB Bandwidth_11G_2437_Ant1 6dB Bandwidth_11G_2462_Ant1 6dB Bandwidth_11N20SISO_2412_Ant1 6dB Bandwidth_11N20SISO_2437_Ant1 6dB Bandwidth_11N20SISO_2462_Ant1 6dB Bandwidth_11N40SISO_2422_Ant1 6dB Bandwidth_11N40SISO_2437_Ant1 6dB Bandwidth_11N40SISO_2452_Ant1 2.Occupied Bandwidth Test Mode Test Channel Ant OBW[MHz] Limit[MHz] Verdict 11B 2412 Ant1 15.15 --- PASS 11B 2437 Ant1 15.13 --- PASS 11B 2462 Ant1 15.11 --- PASS 11G 2412 Ant1 16.79 --- PASS 11G 2437 Ant1 16.80 --- PASS 11G 2462 Ant1 16.80 --- PASS 11N20SISO 2412 Ant1 17.84 --- PASS 11N20SISO 2437 Ant1 17.86 --- PASS 11N20SISO 2462 Ant1 17.87 --- PASS 11N40SISO 2422 Ant1 36.16 --- PASS 11N40SISO 2437 Ant1 36.11 --- PASS 11N40SISO 2452 Ant1 36.10 --- PASS Occupied Bandwidth_11B_2412 Occupied Bandwidth_11B_2437 Occupied Bandwidth_11B_2462 Occupied Bandwidth_11G_2412 Occupied Bandwidth_11G_2437 Occupied Bandwidth_11G_2462 Occupied Bandwidth_11N20SISO_2412 Occupied Bandwidth_11N20SISO_2437 Occupied Bandwidth_11N20SISO_2462 Occupied Bandwidth_11N40SISO_2422 Occupied Bandwidth_11N40SISO_2437 Occupied Bandwidth_11N40SISO_2452 3.Maximum conducted (average) output power Test Mode Test Channel Ant Level [dBm] 10log(1/x) Factor[dB] Power [dBm] Limit [dBm] Verdict 11B 2412 Ant1 7.16 0.00 7.16 30 PASS 11B 2437 Ant1 8.32 0.00 8.32 30 PASS 11B 2462 Ant1 8.61 0.00 8.61 30 PASS 11G 2412 Ant1 6.62 0.00 6.62 30 PASS 11G 2437 Ant1 7.8 0.00 7.80 30 PASS 11G 2462 Ant1 8.01 0.00 8.01 30 PASS 11N20SISO 2412 Ant1 6.54 0.00 6.54 30 PASS 11N20SISO 2437 Ant1 7.68 0.00 7.68 30 PASS 11N20SISO 2462 Ant1 7.95 0.00 7.95 30 PASS 11N40SISO 2422 Ant1 6.79 0.00 6.79 30 PASS 11N40SISO 2437 Ant1 7.33 0.00 7.33 30 PASS 11N40SISO 2452 Ant1 7.59 0.00 7.59 30 PASS Maximum conducted (average) output power_11B_2412_Ant1 Maximum conducted (average) output power_11B_2437_Ant1 Maximum conducted (average) output power_11B_2462_Ant1 Maximum conducted (average) output power_11G_2412_Ant1 Maximum conducted (average) output power_11G_2437_Ant1 Maximum conducted (average) output power_11G_2462_Ant1 Maximum conducted (average) output power_11N20SISO_2412_Ant1 Maximum conducted (average) output power_11N20SISO_2437_Ant1 Maximum conducted (average) output power_11N20SISO_2462_Ant1 Maximum conducted (average) output power_11N40SISO_2422_Ant1 Maximum conducted (average) output power_11N40SISO_2437_Ant1 Maximum conducted (average) output power_11N40SISO_2452_Ant1 4.Maximum(average) power spectral density Test Mode Test Channel Ant Level [dBm/3kHz] 10log(1/x) Factor[dB] PSD[dBm/3kHz] Limit[dBm/3kHz] Verdict 11B 2412 Ant1 -25.55 0.00 -25.55 8.00 PASS 11B 2437 Ant1 -24.47 0.00 -24.47 8.00 PASS 11B 2462 Ant1 -24.16 0.00 -24.16 8.00 PASS 11G 2412 Ant1 -28.02 0.00 -28.02 8.00 PASS 11G 2437 Ant1 -26.91 0.00 -26.91 8.00 PASS 11G 2462 Ant1 -26.68 0.00 -26.68 8.00 PASS 11N20SISO 2412 Ant1 -28.30 0.00 -28.30 8.00 PASS 11N20SISO 2437 Ant1 -26.98 0.00 -26.98 8.00 PASS 11N20SISO 2462 Ant1 -26.79 0.00 -26.79 8.00 PASS 11N40SISO 2422 Ant1 -30.98 0.00 -30.98 8.00 PASS 11N40SISO 2437 Ant1 -30.40 0.00 -30.40 8.00 PASS 11N40SISO 2452 Ant1 -30.13 0.00 -30.13 8.00 PASS Maximum(average) power spectral density_11B_2412_Ant1 Maximum(average) power spectral density_11B_2437_Ant1 Maximum(average) power spectral density_11B_2462_Ant1 Maximum(average) power spectral density_11G_2412_Ant1 Maximum(average) power spectral density_11G_2437_Ant1 Maximum(average) power spectral density_11G_2462_Ant1 Maximum(average) power spectral density_11N20SISO_2412_Ant1 Maximum(average) power spectral density_11N20SISO_2437_Ant1 Maximum(average) power spectral density_11N20SISO_2462_Ant1 Maximum(average) power spectral density_11N40SISO_2422_Ant1 Maximum(average) power spectral density_11N40SISO_2437_Ant1 Maximum(average) power spectral density_11N40SISO_2452_Ant1 5.Band-edge for RF Conducted Emissions Test Mode Test Channel Ant Carrier Power[dBm] Max. Spurious Level [dBm] Limit [dBm] Verdict 11B 2412 Ant1 -2.54 -43.85 -32.54 PASS 11B 2462 Ant1 -1.20 -56.11 -31.20 PASS 11G 2412 Ant1 -7.71 -44.25 -37.71 PASS 11G 2462 Ant1 -6.25 -53.74 -36.25 PASS 11N20SISO 2412 Ant1 -7.81 -42.52 -37.81 PASS 11N20SISO 2462 Ant1 -5.97 -52.65 -35.97 PASS 11N40SISO 2422 Ant1 -10.06 -45.47 -40.06 PASS 11N40SISO 2452 Ant1 -9.30 -52.73 -39.30 PASS Band-edge for RF Conducted Emissions_11B_2412_Ant1 Band-edge for RF Conducted Emissions_11B_2462_Ant1 Band-edge for RF Conducted Emissions_11G_2412_Ant1 Band-edge for RF Conducted Emissions_11G_2462_Ant1 Band-edge for RF Conducted Emissions_11N20SISO_2412_Ant1 Band-edge for RF Conducted Emissions_11N20SISO_2462_Ant1 Band-edge for RF Conducted Emissions_11N40SISO_2422_Ant1 Band-edge for RF Conducted Emissions_11N40SISO_2452_Ant1 6.RF Conducted Spurious Emissions Test Mode Test Channel Ant StartFre [MHz] StopFre [MHz] RBW [kHz] VBW [kHz] Pref[dBm] Max. Level [dBm] Limit [dBm] Verdict 11B 2412 Ant1 30 10000 100 300 -2.63 -46.80 <- 32.63 PASS 11B 2412 Ant1 10000 26000 100 300 -2.626 -43.986 <- 32.626 PASS 11B 2437 Ant1 30 10000 100 300 -1.52 -47.24 <- 31.52 PASS 11B 2437 Ant1 10000 26000 100 300 -1.52 -43.730 <- 31.52 PASS 11B 2462 Ant1 30 10000 100 300 -1.17 -49.50 <- 31.17 PASS 11B 2462 Ant1 10000 26000 100 300 -1.172 -43.222 <- 31.172 PASS 11G 2412 Ant1 30 10000 100 300 -7.65 -46.87 <- 37.65 PASS 11G 2412 Ant1 10000 26000 100 300 -7.645 -44.520 <- 37.645 PASS 11G 2437 Ant1 30 10000 100 300 -6.58 -48.42 <- 36.58 PASS 11G 2437 Ant1 10000 …

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200600527101 Page: 1 of 69 Parlam Zhan E&E Section Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. TEST REPORT Application No.: SHEM2006005271CR FCC ID: 2AXVM-HM-TR13 IC : 26572-HMTR13 Applicant: Hangzhou Microimage Software Co., Ltd. Address of Applicant: Room 313,Unit B,Building 2,399 Danfeng Road,Xixing Subdistrict,Binjiang District,Hangzhou,Zhejiang Manufacturer: Hangzhou Microimage Software Co., Ltd. Address of Manufacturer: Room 313,Unit B,Building 2,399 Danfeng Road,Xixing Subdistrict,Binjiang District,Hangzhou,Zhejiang Factory: Hangzhou Microimage Intelligent Technology Co.,Ltd. Address of Factory: Floor 2,Building A1,299 Qiushi Road,Tonglu Economic Development Zone,Tonglu County,Hangzhou City,Zhejiang Province Equipment Under Test (EUT): EUT Name: Thermal Image Scope Model No.: HM-TR13-35XF/W-TH35,HM-TR13-35XF/CW-TH35C,HM-TR13-25XF/W- TH25,HM-TR13-35XF/W-TH35UHK,HM-TR13-35XF/CW-TH35CUHK,HM- TR13-25XF/W-TH25UHK,HM-TR13-35XF/W-TH35CKV,HM-TR13- 35XF/CW-TH35CCKV,HM-TR13-25XF/W-TH25CKV,HM-TR13-35XF/W- TH35UVS,HM-TR13-35XF/CW-TH35CUVS,HM-TR13-25XF/W- TH25UVS,HM-TR13-35XF/W-TH35KVO,HM-TR13-35XF/CW- TH35CKVO,HM-TR13-25XF/W-TH25KVO,HM-TR13-35XF/W- TH35HUN,HM-TR13-35XF/CW-TH35CHUN,HM-TR13-25XF/W- TH25HUN¤ ¤ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade mark: HIKMICRO Standard(s) : 47 CFR Part 15, Subpart C 15.247 RSS-247 Issue 2, February 2017 RSS-Gen Issue 5, March 2019 Amendment 1 Date of Receipt: 2020-06-29 Date of Test: 2020-07-10 to 2020-07-20 Date of Issue: 2020-11-23 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200600527101 Page: 2 of 69 For IC Model No: HM-TR13-35XF/W-TH35, HM-TR13-35XF/CW-TH35C, HM-TR13-25XF/W-TH25 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM20060…

Text truncated - open the document above for the full version.