2AXYP-OSW-831N-V2Smart Watch

(ORAIMO TECHNOLOGY LIMITED) (August 5, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2AXYP-OSW-831N- V2#) [ORAIMO TECHNOLOGY LIMITED] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, Greeny Xian / Manager (ORAIMO TECHNOLOGY LIMITED) (August 5, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID: 2AXYP-OSW-831N- V2#) [ORAIMO TECHNOLOGY LIMITED] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Greeny Xian / Manager

ORAIMO TECHNOLOGY LIMITED Agent Authorization Letter (August 5, 2026) Eurofins MET Labs 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (WORLD STANDARDIZATION CERTIFICATION & TESTING GROUP (SHENZHEN) CO., LTD.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Greeny Xian / Manager

ORAIMO TECHNOLOGY LIMITED Long Term Confidentiality Request Letter (August 5, 2026) Eurofins MET Labs 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Smart Watch/2AXYP-OSW-831N-V2#) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above-mentioned documents belong to internal documents, is our proprietary information, that could never get into the possession of our competition. Please contact me if there is any information you may need. Sincerely, Client’s name / Title : Greeny Xian / Manager Company Name: ORAIMO TECHNOLOGY LIMITED Contact information / address: [email protected] / FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL CENTRE 19-25 SHAN MEI STREET FOTAN NT HONGKONG

ORAIMO TECHNOLOGY LIMITED Short Term Confidentiality Request Letter (August 5, 2026) MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Short Term Confidentiality Request For (Smart Watch/2AXYP-OSW-8 31N-V 2#) To Whom It May Concern: In accordance with sections 0.457 and 0.459 of CFR 47, < ORAIMO TECHNOLOGY LIMITED>. requests short-term Confidentiality of following sections of this application for a period of 180 days after grant is issued. Test setup photos External photos Internal photos User’s manual These documents contain detailed system and equipment descriptions and related information about the product, which < ORAIMO TECHNOLOGY LIMITED. > considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, < ORAIMO TECHNOLOGY LIMITED.> feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Name: Greeny Xian Function: Manager Signature:

OSW-831N48X50MM2024.04.23覃诗频 蓝色区域镭雕 F C C I D : 2 A X Y P - O S W - 8 3 1 N - V 2 M O D E L : O S W - 8 3 1 N I P 6 8 M a d e i n C h i n a S / N : 4 0 4 2 3 0 0 0 0 1 OSW-831N_Label and Label location

Page 1 of 7 FCC RF Exposure Report For ORAIMO TECHNOLOGY LIMITED FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL CENTRE 19-25 SHAN MEI STREET FOTAN NT HONGKONG Model : OSW-831N Report Number: WSCT-ANAB-R&E260700060A Report Date: 23 July 2026 FCC ID: 2AXYP-OSW-831N-V2 Prepared By: World Standardization Certification & Testing Group (Shenzhen) Co., Ltd. Building A-B,Baoli'an Industrial Park,No.58 and 60,Tangtou Avenue, Shiyan Street, Bao'an District, Shenzhen City, Guangdong Province, China Tel: +86-755-26996192 Fax: +86-755-86376605 Report No.: WSCT-ANAB-R&E260700060A SAR Evaluation Report Page 2 of 7 Table of contents 1 General information .......................................................................................................................................... 3 1.1 Notes ........................................................................................................................................................... 3 1.2 EUT Information ......................................................................................................................................... 4 2 Testing laboratory ............................................................................................................................................. 5 3 ACCREDITATIONS ............................................................................................................................................ 5 4 Applicant and Manufacturer ............................................................................................................................ 5 5 Test standard/s: ................................................................................................................................................ 5 6 Test result ........................................................................................................................................................... 6 7 Conclusion .......................................................................................................................................................... 7 Report No.: WSCT-ANAB-R&E260700060A SAR Evaluation Report Page 3 of 7 Modified History REV. Modification Description Issued Date Remark REV.1.0 Initial Test Report Relesse 23 July 2026 Li Huaibi 1 General information 1.1 Notes The test results of this test report relate exclusively to the test item specified in this test report. Shenzhen Timeway Testing Laboratories does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report is not to be reproduced or published in full without the prior written permission. Report No.: WSCT-ANAB-R&E260700060A SAR Evaluation Report Page 4 of 7 1.2 EUT Information Device Information： Product Type: Smart Watch Model: OSW-831N Trade Name: oraimo Software version: V1.0.3 Hardware version: AB303_V01 Device Type: Portable device Exposure Category: uncontrolled environment / general population Production Unit or Identical Prototype： Production Unit Antenna Type : Integral Antenna Device Operating Configurations: Modulation: GFSK, π/4-DQPSK, 8-DPSK Channel Separation: BT: 1MHz BLE:2MHz Operation Frequency: 2402MHz~2480MHz Antenna Gain: -0.91dBi Power Source: Rechargeable Li-ion Polymer Battery: ZWD402226V Nominal Voltage: 3.8V Rated Capacity: 260mAh/0.988Wh Note:The test results of this test report relate exclusively to the test item specified in this test report. World Standardization Certification & Testing Group (Shenzhen) Co.,Ltd does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report is not to be reproduced or published in full without the prior written permission. Report No.: WSCT-ANAB-R&E260700060A SAR Evaluation Report Page 5 of 7 2 Testing laboratory Test Site World Standardization Certification & Testing Group (Shenzhen) Co., Ltd. Laboratory A: Building A-B,Baoli'an Industrial Park,No.58 and 60,Tangtou Avenue, Shiyan Street, Bao'an District, Shenzhen City, Guangdong Province, China TEL: +86-755-26996192 FAX: +86-755-86376605 3 ACCREDITATIONS Our laboratories are accredited and approved by the following approval agencies according to ISO/IEC 17025:2017. USA ANAB - Certificate Number: AT-3951 China CNAS (Registration Number: L3732) Canada ISED(CAB identifier:CN0178) Copies of granted accreditation certificates are available for downloading from our web site, http://www.wsct-cert.com 4 Applicant and Manufacturer Applicant/Client Name: ORAIMO TECHNOLOGY LIMITED Applicant Address: FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL CENTRE 19-25 SHAN MEI STREET FOTAN NT HONGKONG Manufacturer Name: ORAIMO TECHNOLOGY LIMITED Manufacturer Address: FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL CENTRE 19-25 SHAN MEI STREET FOTAN NT HONGKONG 5 Test standards: No. Identity Document Title 1 47 CFR Part 15C Radio frequency devices intentional radiators 2 47 CFR Part 2.1093 Radio frequency radiation exposure evaluation: portable devices 3 KDB447498 D01 General RF Exposure Guidance v06 Report No.: WSCT-ANAB-R&E260700060A SAR Evaluation Report Page 6 of 7 6 Test result According KDB 447498 D01 4.3.1 General SAR test exclusion guidance Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions. The mi…

Text truncated - open the document above for the full version.

Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 41 of 81 6.7. Dwell Time 6.7.1. Test Specification Test Requirement: FCC Part15 C Section 15.247 (a)(1) Test Method: ANSI C63.10:2020 Limit: The average time of occupancy on any channel shall not be greater than 0.4 seconds within a period of 0.4 seconds multiplied by the number of hopping channels employed. Test Setup: Test Mode: Hopping mode Test Procedure: 1. The testing follows ANSI C63.10:2020 Measurement Guidelines. 2. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. 3. Set to the maximum power setting and enable the EUT transmit continuously. 4. Enable the EUT hopping function. 5. Use the following spectrum analyzer settings: Span = zero span, centered on a hopping channel; RBW shall be ≤ channel spacing and where possible RBW should be set >> 1 / T, where T is the expected dwell time per channel; VBW≥RBW; Sweep = as necessary to capture the entire dwell time per hopping channel; Detector function = peak; Trace = max hold. 6. Measure and record the results in the test report. Test Result: PASS Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 42 of 81 6.7.2. Test Data Mode Frequency (MHz) Pulse Time (ms) Total Dwell Time (ms) Burst Count Period Time (ms) Limit (ms) Verdict 1-DH1 2402 0.404 128.876 319 31600 400 Pass 1-DH1 2441 0.405 129.195 319 31600 400 Pass 1-DH1 2480 0.403 126.945 315 31600 400 Pass 1-DH3 2402 1.66 265.6 160 31600 400 Pass 1-DH3 2441 1.66 275.56 166 31600 400 Pass 1-DH3 2480 1.66 272.24 164 31600 400 Pass 1-DH5 2402 2.909 290.9 100 31600 400 Pass 1-DH5 2441 2.908 314.064 108 31600 400 Pass 1-DH5 2480 2.908 296.616 102 31600 400 Pass Note: 1. In normal mode, hopping rate is 1600 hops/s with 6 slots in 79 hopping channels. For DH1, With channel hopping rate (1600 / 2 / 79) in Occupancy Time Limit (0.4 x 79) (s), Hops Over Occupancy Time comes to (1600 / 2 / 79) x (0.4 x 79) = 320 hops For DH3, With channel hopping rate (1600 / 4 / 79) in Occupancy Time Limit (0.4 x 79) (s), Hops Over Occupancy Time comes to (1600 / 4 / 79) x (0.4 x 79) = 160 hops For DH5, With channel hopping rate (1600 / 6 / 79) in Occupancy Time Limit (0.4 x 79) (s), Hops Over Occupancy Time comes to (1600 / 6 / 79) x (0.4 x 79) = 106.67 hops 2. Dwell Time(s) = Hops Over Occupancy Time (hops) x Package Transfer Time Test plots as follows: Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 43 of 81 Test Graphs Dwell NVNT 1-DH1 2402MHz Ant1 One Burst Dwell NVNT 1-DH1 2402MHz Ant1 Accumulated Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 44 of 81 Dwell NVNT 1-DH1 2441MHz Ant1 One Burst Dwell NVNT 1-DH1 2441MHz Ant1 Accumulated Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 45 of 81 Dwell NVNT 1-DH1 2480MHz Ant1 One Burst Dwell NVNT 1-DH1 2480MHz Ant1 Accumulated Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 46 of 81 Dwell NVNT 1-DH3 2402MHz Ant1 One Burst Dwell NVNT 1-DH3 2402MHz Ant1 Accumulated Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 47 of 81 Dwell NVNT 1-DH3 2441MHz Ant1 One Burst Dwell NVNT 1-DH3 2441MHz Ant1 Accumulated Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 48 of 81 Dwell NVNT 1-DH3 2480MHz Ant1 One Burst Dwell NVNT 1-DH3 2480MHz Ant1 Accumulated Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 49 of 81 Dwell NVNT 1-DH5 2402MHz Ant1 One Burst Dwell NVNT 1-DH5 2402MHz Ant1 Accumulated Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 50 of 81 Dwell NVNT 1-DH5 2441MHz Ant1 One Burst Dwell NVNT 1-DH5 2441MHz Ant1 Accumulated Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 51 of 81 Dwell NVNT 1-DH5 2480MHz Ant1 One Burst Dwell NVNT 1-DH5 2480MHz Ant1 Accumulated Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 52 of 81 6.8. Pseudorandom Frequency Hopping Sequence Test Requirement: FCC Part15 C Section 15.247 (a)(1) requirement: Frequency hopping systems shall have hopping channel carrier frequencies separated by a minimum of 25 kHz or the 20 dB bandwidth of the hopping channel, whichever is greater. Alternatively. Frequency hopping systems operating in the 2400-2483.5 MHz band may have hopping channel carrier frequencies that are separated by 25 kHz or two-thirds of the 20 dB bandwidth of the hopping channel, whichever is greater, provided the systems operate with an output power no greater than 125 mW. The system shall hop to channel frequencies that are selected at the system hopping rate from a Pseudorandom ordered list of hopping frequencies. Each frequency must be used equally on the average by each transmitter. The system receivers shall have input bandwidths that match the hopping channel bandwidths of their corresponding transmitters and shall shift frequencies in synchronization with the transmitted signals. EUT Pseudorandom Frequency Hopping Sequence The pseudorandom sequence may be generated in a nine-stage shift register whose 5th and 9th stage outputs are added in a modulo-two addition stage. And the result is fed back to the input of the first stage. The sequence begins with the first one of 9 consecutive ones; i.e. the shift register is initialized with nine ones. • Number of shift register stages: 9 • Length of pseudo-random sequence: 2 9 -1 = 511 bits • Longest sequence of zeros: 8 (non-inverted signal) An example of Pseudorandom Frequency Hopping Sequence as follow: Each frequency used equally on the average by each transmitter. The system receivers have input bandwidths that match the hopping channel bandwidths of their corresponding transmitters and shift frequencies in synchronization with the transmitted signals. Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 53 of 81 6.9. Conducted Band Edge Measurement 6.9.1. Test Specificatio…

Text truncated - open the document above for the full version.

Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 71 of 81 6.11.2. Test Data Please refer to following diagram for individual Below 1GHz Horizontal: Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 72 of 81 Vertical: Note1: Freq. = Emission frequency in MHz Reading level (dBμV) = Receiver reading Corr. Factor (dB) = Antenna factor + Cable loss - Amplifier factor. Measurement (dBμV) = Reading level (dBμV) + Corr. Factor (dB) Limit (dBμV) = Limit stated in standard Margin (dB) = Measurement (dBμV) – Limits (dBμV) Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 73 of 81 Above 1GHz Note 1: The marked spikes near 2400 MHz with circle should be ignored because they are Fundamental signal. Note 2: The spurious above 18G is noise only, do not show on the report. GFSK Low channel: 2402MHz Horizontal: Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 74 of 81 Vertical: Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 75 of 81 Middle channel: 2441MHz Horizontal: Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 76 of 81 Vertical: Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 77 of 81 High channel: 2480MHz Horizontal: Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 78 of 81 Vertical: Note: 1. The emission levels of other frequencies are very lower than the limit and not show in test report. 2. Measurements were conducted from 1 GHz to the 10th harmonic of highest fundamental frequency. 3. Data of measurement shown “---“in the above table mean that the reading of emissions is attenuated more than 20 dB below the limits or the field strength is too small to be measured. 4. Measurements were conducted in all three modulation (GFSK, Pi/4 DQPSK, 8DPSK), and the worst case Mode (GFSK) was submitted only. 5. EUT has been tested in unfolded states, and the report only reflects data in the unfolded state (worst-case scenario) Note: Freq. = Emission frequency in MHz Reading level (dBμV) = Receiver reading Corr. Factor (dB) = Attenuation factor + Cable loss Level (dBμV) = Reading level (dBμV) + Corr. Factor (dB) Limit (dBμV) = Limit stated in standard Margin (dB) = Level (dBμV) – Limits (dBμV) Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 79 of 81 6.11.3. Restricted Bands Requirements Bluetooth (GFSK, Pi/4-DQPSK, 8DPSK)mode have been tested, and the worst result GFSK model was report as below GFSK Low channel Horizontal: Vertical: Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 80 of 81 High channel Horizontal: Vertical: Note: Freq. = Emission frequency in MHz Reading level (dBμV) = Receiver reading Corr. Factor (dB) = Attenuation factor + Cable loss Level (dBμV) = Reading level (dBμV) + Corr. Factor (dB) Limit (dBμV) = Limit stated in standard Margin (dB) = Level (dBμV) – Limits (dBμV) Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 81 of 81 7. Test Setup Photographs Please refer to Annex "Test Setup photos-15C" for test setup photos *****END OF REPORT*****

Report No.: BL-SZ2310466-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 14 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Titan Company Limited Address: Integrity, #193, Veerasandra, Electronics City P.O., Off Hosur Main Road Bangalore, India, 560100 Equipment Type: Smart watch Model Name: 38082 Brand Name: N/A Test Standard: IEEE Std 149-2021 Sample Arrival Date: Jan. 12, 2023 Test Date: Jan. 13, 2023 Date of Issue: Jan. 31, 2023 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Mai Jintian Checked by: Zou Liu Approved by: Tolan Tu (Testing Director) _______________ _______________ _______________ Report No.: BL-SZ2310466-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 14 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Jan. 31, 2023 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 3 1.1 Test Laboratory ..................................................................................................................... 3 1.2 Test Location ......................................................................................................................... 3 2 PRODUCT INFORMATION ......................................................................................................... 4 2.1 Applicant Information ............................................................................................................ 4 2.2 Manufacturer Information ...................................................................................................... 4 2.3 General Description for Equipment under Test (EUT) .......................................................... 4 2.4 Ancillary Equipment .............................................................................................................. 4 2.5 Technical Information ............................................................................................................ 4 3 SUMMARY OF TEST RESULTS ................................................................................................. 5 3.1 Test Standards ...................................................................................................................... 5 3.2 Test Verdict ........................................................................................................................... 5 3.3 Test Uncertainty .................................................................................................................... 5 4 GENERAL TEST CONFIGURATIONS ........................................................................................ 6 4.1 Test Condition ....................................................................................................................... 6 4.2 Test Equipment List .............................................................................................................. 6 4.3 Test Setup ............................................................................................................................. 7 ANNEX A TEST RESULTS ............................................................................................................. 8 A.1 Gain and Efficiency ............................................................................................................... 8 A.2 VSWR ................................................................................................................................... 9 ANNEX B RADIATION PATTERN ................................................................................................ 10 ANNEX C TEST SETUP PHOTOS ............................................................................................... 13 ANNEX D EUT PHOTO ................................................................................................................ 13 Report No.: BL-SZ2310466-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 14 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1/F, Building B, Ganghongji High-tech Intelligent Industrial Park, No. 1008, Songbai Road, Yangguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong Province, P. R. China Report No.: BL-SZ2310466-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 14 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant Titan Company Limited Address Integrity, #193, Veerasandra, Electronics City P.O., Off Hosur Main Road Bangalore, India, 560100 2.2 Manufacturer Information Manufacturer JIANGSU SOP TECHNOLOGY CO LTD Address D/F BLOCK 8 INTELLIGENT TERMINAL INDUSTRIAL PARK HI- TECH ZONE YANCHENG JIANGSU 2.3 General Description for Equipment under Test (EUT) EUT Name Smart watch Model Name Under Test 38082 Antenna Type Wire Antenna Dimensions 18 mm 2.4 Ancillary Equipment …

Text truncated - open the document above for the full version.

Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 2 of 81 TABLE OF CONTENTS 1. Test Certification ..................................................................................... 3 2. Test Result Summary .............................................................................. 4 3. EUT Description ....................................................................................... 5 4. Genera Information .................................................................................. 7 4.1. TEST ENVIRONMENT AND MODE .............................................................................................................. 7 4.2. DESCRIPTION OF SUPPORT UNITS .......................................................................................................... 7 5. Facilities and Accreditations .................................................................. 8 5.1. FACILITIES ............................................................................................................................................ 8 5.2. ACCREDITATIONS ............................................................................................................................ 8 5.3. MEASUREMENT UNCERTAINTY ............................................................................................................... 9 5.4. MEASUREMENT INSTRUMENTS ................................................................................................... 10 6. Test Results and Measurement Data ................................................... 11 6.1. ANTENNA REQUIREMENT ...................................................................................................................... 11 6.2. CONDUCTED EMISSION ........................................................................................................................ 12 6.3. CONDUCTED OUTPUT POWER .............................................................................................................. 16 6.4. 20DB OCCUPY BANDWIDTH ................................................................................................................. 23 6.5. CARRIER FREQUENCIES SEPARATION .................................................................................................. 30 6.6. HOPPING CHANNEL NUMBER ............................................................................................................... 37 6.7. DWELL TIME ........................................................................................................................................ 41 6.8. PSEUDORANDOM FREQUENCY HOPPING SEQUENCE ............................................................................. 52 6.9. CONDUCTED BAND EDGE MEASUREMENT ............................................................................................ 53 6.10. CONDUCTED SPURIOUS EMISSION MEASUREMENT................................................................................ 58 6.11. RADIATED SPURIOUS EMISSION MEASUREMENT ................................................................................... 68 7. Test Setup Photographs ....................................................................... 81 Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 4 of 81 2. Test Result Summary Requirement CFR 47 Section Result Antenna Requirement §15.203/§15.247 (c) PASS AC Power Line Conducted Emission §15.207 PASS Maximum conducted output power §15.247 (b)(1) §2.1046 PASS 20dB Occupied Bandwidth §15.247 (a)(1) §2.1049 PASS Carrier Frequencies Separation §15.247 (a)(1) PASS Hopping Channel Number §15.247 (a)(1) PASS Dwell Time §15.247 (a)(1) PASS Radiated Emission §15.205/§15.209 §2.1053, §2.1057 PASS Band Edge §15.247(d) §2.1051, §2.1057 PASS Note: 1. PASS: Test item meets the requirement. 2. Fail: Test item does not meet the requirement. 3. N/A: Test case does not apply to the test object. 4. The test result judgment is decided by the limit of test standard. Report No.: WSCT-ANAB-R&E260700060A-BT Issued Date: 23 July 2026 Page 5 of 81 3. EUT Description Product Name: Smart Watch Model : OSW-831N Trade Mark: oraimo Software version: V1.0.3 Hardware version: AB303_V01 Operation Frequency: 2402MHz~2480MHz Channel Separation: 1MHz Number of Channel: 79 Modulation Type: GFSK, π/4-DQPSK, 8-DPSK Antenna Type: Integral Antenna Antenna Gain: -0.91dBi Operating Voltage Rechargeable Li-ion Polymer Battery: ZWD402226V Nominal Voltage: 3.8V Rated Capacity: 260mAh/0.988Wh …

Text truncated - open the document above for the full version.