2AXZJ-J48800Wireless Phone Charger

Lucid USA, Inc Lucid Motors, Inc 7373 Gateway Blvd., Newark, CA 94560, USA Tel: (650) 802-8181 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) To whom it may concern, [Lucid USA, Inc, Grantee Code: 2AXZJ] (“the applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC Grantee Code. The service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. The applicant acknowledges that they will maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the following agent information changes. Company Name: Lucid USA, Inc Company US Address: Lucid Motors, Inc 7373 Gateway Blvd., Newark, CA 94560, USA Contact Person: Tommy Wong Email: [email protected] Telephone number: (650) 802-8181 FRN: 0030133995 Sincerely yours, Signed by the Applicant Name: Tommy Wong Title: Technical Specialist, EMC Compliance Engineer Email: [email protected] Date: July 23, 2024

Lucid USA, Inc Lucid Motors, Inc 7373 Gateway Blvd., Newark, CA 94560, USA Tel: (650) 802-8181 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: July 23, 2024 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) To whom it may concern, Lucid USA, Inc (“the applicant”) certifies that the equipment [FCC ID: 2AXZJ-J48800] for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Lucid USA, Inc (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, ________________________ Tommy Wong / Technical Specialist, EMC Compliance Engineer [email protected]

Lucid USA, Inc Lucid Motors, Inc 7373 Gateway Blvd., Newark, CA 94560, USA Tel: (650) 802-8181 FCC Agent Authorization Date: July 23, 2024 To whom it may concern, Lucid USA, Inc hereby authorize Eric Huang in Sporton International Inc. to act on our behalf in all matters relating to applications for FCC equipment authorization, including the signing of all documents relating to these matters. Any and all acts carried out by Eric Huang in Sporton International Inc. on our behalf shall have the same effect as acts of our own. We also hereby certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits that includes FCC benefits pursuant to section 5301 of the Anti-Drug Abuse Act of 1988. 21 U.S.C. 862. This authorization is limited to the product of as following: FCC ID: 2AXZJ-J48800 This authorization is valid until further written notice from Lucid USA, Inc Sincerely, ________________________ Tommy Wong / Technical Specialist, EMC Compliance Engineer [email protected]

Lucid USA, Inc Lucid Motors, Inc 7373 Gateway Blvd., Newark, CA 94560, USA Tel: (650) 802-8181 Date: July 23, 2024 FCC Laboratory 7435 Oakland Mills Rd Columbia MD 21046 Subject: Request for Confidentiality FCC ID: 2AXZJ-J48800 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following documents from public disclosure indefinitely. ⚫ Schematic Diagram ⚫ Block Diagram ⚫ Part List ⚫ Operational Description Above mentioned documents which contain detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we are requesting the Commission to withhold the following documents for 180 days after the grant of equipment authorization is issued: ⚫ External Photos ⚫ Internal Photos ⚫ Test Setup Photos ⚫ User Manual It is our understanding that all measurement test reports, FCC ID label format cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, _______________________ Tommy Wong / Technical Specialist, EMC Compliance Engineer [email protected]

Labellocation On the surface of thedevice

SPORTON INTERNATIONAL INC. Page Number : 1 of 8 TEL : 886-3-327-3456 Report Issued Date : Jul. 08, 2024 FAX : 886-3-328-4978 FCC RF Exposure Report Report No. : FA3N2127 RF Exposure Report FCC ID : 2AXZJ-J48800 Equipment : Wireless Phone Charger Brand Name : LUCID Model Name : J48800 Applicant : Lucid USA, Inc 7373 Gateway Blvd, Newark, CA 94560, USA Manufacture : Lucid USA, Inc 7373 Gateway Blvd, Newark, CA 94560, USA Standard : FCC CFR 47 part 2.1091 The product was received on Jan. 05, 2024 and testing was started from Jan. 24, 2024 and completed on Jan. 25, 2024. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample provide by manufacturer and the test data has been evaluated in accordance with the test procedures given in 47 CFR Part 2.1091 and has been pass the FCC requirement. The results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. Sporton International Inc. EMC & Wireless Communications Laboratory No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan Approved by: Cona Huang / Deputy Manager SPORTON INTERNATIONAL INC. Page Number : 2 of 8 TEL : 886-3-327-3456 Report Issued Date : Jul. 08, 2024 FAX : 886-3-328-4978 FCC RF Exposure Report Report No. : FA3N2127 Table of Contents 1. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 4 2. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 4 3. KDB 680106 D01 EQUIPMENT APPROVAL CONSIDERATIONS ........................................................... 5 4. TEST MODE ................................................................................................................................................ 5 6. RF EXPOSURE EVALUATION ................................................................................................................... 6 Appendix A. Test Setup Photo SPORTON INTERNATIONAL INC. Page Number : 3 of 8 TEL : 886-3-327-3456 Report Issued Date : Jul. 08, 2024 FAX : 886-3-328-4978 FCC RF Exposure Report Report No. : FA3N2127 Revision History REPORT NO. VERSION DESCRIPTION ISSUED DATE FA3N2127 Rev. 01 Initial issue of report Jul. 08, 2024 SPORTON INTERNATIONAL INC. Page Number : 4 of 8 TEL : 886-3-327-3456 Report Issued Date : Jul. 08, 2024 FAX : 886-3-328-4978 FCC RF Exposure Report Report No. : FA3N2127 1. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type Wireless Phone Charger Brand Name LUCID Model Name J48800 FCC ID 2AXZJ-J48800 Frequency Range 127.7 KHz Modulation Type FSK 2. RF Exposure Limit Introduction § 1.1310 The criteria listed in table 1 shall be used to evaluate the environmental impact of human exposure to radio frequency(RF) radiation as specified in § 1.1307(b). (1) Occupational/controlled exposure limits apply in situations in which persons are exposed as a consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. Limits for occupational/controlled exposure also apply in situations when a person is transient through a location where occupational/controlled limits apply provided he or she is made aware of the potential for exposure. The phrase fully aware in the context of applying these exposure limits means that an exposed person has received written and/or verbal information fully explaining the potential for RF exposure resulting from his or her employment. With the exception of transient persons, this phrase also means that an exposed person has received appropriate training regarding work practices relating to controlling or mitigating his or her exposure. Such training is not required for transient persons, but they must receive written and/or verbal information and notification (for example, using signs) concerning their exposure potential and appropriate means available to mitigate their exposure. The phrase exercise control means that an exposed person is allowed to and knows how to reduce or avoid exposure by administrative or engineering controls and work practices, such as use of personal protective equipment or time averaging of exposure. (2) General population/uncontrolled exposure limits apply in situations in which the general public may be exposed, or in which persons who are exposed as a consequence of their employment may not be fully aware of the potential for exposure or cannot exercise control over their exposure. SPORTON INTERNATIONAL INC. Page Number : 5 of 8 TEL : 886-3-327-3456 Report Issued Date : Jul. 08, 2024 FAX : 886-3-328-4978 FCC RF Exposure Report Report No. : FA3N2127 3. KDB 680106 D01 EQUIPMENT APPROVAL CONSIDERATIONS Requirement Devices (1) Power transfer frequency is less than 1 MHz. Yes. Operating Frequency is less than 1MHz (2) The output power from each transmitting element (e.g., coil) is less than or equal to 15 watts The device support eight primary coil, the device output power of each individual coil is < 15W, and the total output power from two charging coil is > 15W. (3) A client device providing the maximum permitted load is placed in physical contact with the transmitter (i.e., the surfaces of the transmitter and client device enclosures need to be in physical contact The device consist of eight primary coils and only support two charging clients in the same time (4) Only § 2.1091-Mobile exposure conditions apply (i.e., this provision does not cover § 2.1093-Portable exposure conditions) The product do not support any physical attach to the client, mobile exposure condition is applied 4. Test Mode This device has been tested in the following charging conditions as below: Test Mode Test Setup Configuration Charging Current Condition TM1 Test w/ Samsung Galaxy Buds Client Device insta…

Text truncated - open the document above for the full version.

Lucid Gravity Wireless Charger Coil Specification DONGGUAN KIMCHEN INDUSTRY INTL LIMITED Address: No. 2 Xisha Road, Shijie Town, Dongguan City, Guangdong Province Manufacturer: DONGGUAN KIMCHEN INDUSTRY INTL LIMITED Coil PN: JZ-FSXQ-8coil Power Rating: 48W (Type) (Support dual 15W Rx) Number of turns: X1-8TS; X2-9TS Coil Dimension: 133.7*86.94*2.6 Working Frequency: 127.7 kHz ELECTRICAL CHARACTERISTICS: TEMPERATURE:25±10°C，RELATIVE HUMIDITY:65±10% NO. ITEM TERMINAL SPECIFICATION TEST FREQUENCY TEST EQUIPMENTS 1 Inductance （IND） S-F Coil with Ferrite： X1:6.3 uH±10%; X2:6.4 uH±10% 100kHz/V LCZ METER 1062 2 DCR S-F 30mΩMIN~50mΩMAX 1kHz/V LCZ METER 1062 3 Q factor S-F 60MIN~90MAX 100kHz/V LCZ METER 1062 4 Operation Temp. -40°TO 125°

TEL : 886-3-327-3456 Page Number : 1 of 15 FAX : 886-3-328-4978 Issue Date : Jul. 04, 2024 Report Template No.: BU5-FR15C Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR3N2127 FCC RADIO TEST REPORT FCC ID : 2AXZJ-J48800 Equipment : Wireless Phone Charger Brand Name : LUCID Model Name : J48800 Applicant : Lucid USA, Inc 7373 Gateway Blvd, Newark, CA 94560, USA Manufacturer : Lucid USA, Inc 7373 Gateway Blvd, Newark, CA 94560, USA Standard : FCC Part 15 Subpart C §15.209 The product was received on Jan. 04, 2024 and testing was performed from Feb. 23, 2024 to Mar. 15, 2024. We, Sporton International Inc. EMC & Wireless Communications Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International Inc. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu Sporton International Inc. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) TEL : 886-3-327-3456 Page Number : 2 of 15 FAX : 886-3-328-4978 Issue Date : Jul. 04, 2024 Report Template No.: BU5-FR15C Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR3N2127 Table of Contents 1. General Description ........................................................................................................................................5 1.1 Product Feature of Equipment Under Test ............................................................................................................. 5 1.2 Modification of EUT ................................................................................................................................................ 5 1.3 Testing Location ..................................................................................................................................................... 5 1.4 Applicable Standards.............................................................................................................................................. 6 2. Test Configuration of Equipment Under Test ...............................................................................................7 2.1 Descriptions of Test Mode ...................................................................................................................................... 7 2.2 Connection Diagram of Test System ...................................................................................................................... 7 2.3 Support Unit used in test configuration and system ............................................................................................... 8 2.4 EUT Operation Test Setup ..................................................................................................................................... 8 3. Test Results .....................................................................................................................................................9 3.1 20dB and 99% OBW Spectrum Bandwidth Measurement ...................................................................................... 9 3.2 Radiated Emissions Measurement ....................................................................................................................... 10 3.3 Antenna Requirements ......................................................................................................................................... 13 4. List of Measuring Equipment ...................................................................................................................... 14 5. Measurement Uncertainty ............................................................................................................................ 15 Appendix A. Test Results of RF Near Field Test Items Appendix B. Test Results of Radiated Test Items B2. Results of Radiated Emissions (9 kHz~30MHz) B3. Results of Radiated Emissions (30MHz~1GHz) Appendix C. Setup Photographs TEL : 886-3-327-3456 Page Number : 3 of 15 FAX : 886-3-328-4978 Issue Date : Jul. 04, 2024 Report Template No.: BU5-FR15C Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR3N2127 History of this test report Report No. Version Description Issue Date FR3N2127 01 Initial issue of report Jul. 04, 2024 TEL : 886-3-327-3456 Page Number : 4 of 15 FAX : 886-3-328-4978 Issue Date : Jul. 04, 2024 Report Template No.: BU5-FR15C Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR3N2127 Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark - 15.207 AC Power Line Conducted Emissions Not Required See Note 3.1 15.215(c) 20dB Spectrum Bandwidth Reporting only - 2.1049 99% OBW Spectrum Bandwidth Reporting only - 3.2 15.209 Field Strength of Fundamental Emissions Pass Max level 16.57 dBμV/m at 0.13 MHz Radiated Spurious Emissions Pass 7.19 dB under the limit at 479.90MHz 3.3 15.203 Antenna Requirements Pass - Note: 1. Not required means after assessing, test items are not necessary to carry out. 2. The EUT is powered by batteries which is deemed DC power source, it does not operate from the AC power lines or contain provisions for operation while connected to the AC power lines, according to 47 CFR §15.207(c), the conducted emission limits are not applicable to the device hence the test is not performed. Conformity Assessment Condition: 1. The test results (PASS/FAIL) with all measurement uncertainty excluded are presented against the regulation limits or in accordance with the requirements stipulated by the applicant/manufacturer who shall bear all the risks of non-compliance that may potentially occur if measurement uncertainty is taken into account. 2. The measurement uncerta…

Text truncated - open the document above for the full version.