2AY4C-GIX01Industrial PC

Shenzhen Jiteng Network Technology Co., Ltd. Date: September 25th, 2025 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: 2AY4C-GIX01 [Shenzhen Jiteng Network Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, (Applicant signature) (Applicant printed name) Chang E Shenzhen Jiteng Network Technology Co., Ltd. Date: September 25th, 2025 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID: 2AY4C-GIX01 [Shenzhen Jiteng Network Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Chang E

Shenzhen Jiteng Network Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 [2025-09-25] U.S. Agent Designation [Shenzhen Jiteng Network Technology Co., Ltd.] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2AY4C-GIX01): Name and company of U.S. agent: [GLOCERTS TECHNOLOGY INC] Physical U.S. address of agent: [19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507] FRN of U.S. agent: [0036339737] Email address of U.S. agent: [[email protected]] Telephone of U.S.agent: (626) 588-8039 [GLOCERTS TECHNOLOGY INC] acknowledges their obligation to accept service of process on behalf of [Shenzhen Jiteng Network Technology Co., Ltd.]. [Shenzhen Jiteng Network Technology Co., Ltd.] with the FRN [0030647697] accepts its obligation to maintain an agent for service of process in the United States for no less than 1 year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Signature [Chang E] [Huiying Fan] [Manager] [Director] [Shenzhen Jiteng Network Technology Co., Ltd.] [GLOCERTS TECHNOLOGY INC]

Shenzhen Jiteng Network Technology Co., Ltd. Date: September 25th, 2025 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Industrial PC/ IX12 # FCC ID: 2AY4C- GIX01#) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (list the items that are being requested for confidentiality here) required to be submitted with this application be permanently withheld from public review. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operation Description Software Security Requirements for U-NII devices Please contact me if there is any information you may need. Sincerely, Signature: Name: Chang E Title: Manager

Shenzhen Jiteng Network Technology Co., Ltd. Date: September 25th, 2025 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION FCC ID: 2AY4C-GIX01 To Whom It May Concern: We, the undersigned, hereby authorize (Bay Area Compliance Laboratories Corp. (Dongguan)) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Name: Chang E Title: Manager

Shenzhen Jiteng Network Technology Co., Ltd. Date: September 25th, 2025 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Short Term Confidentiality Request For (Industrial PC/ IX12 # FCC ID: 2AY4C- GIX01#) To Whom It May Concern: In accordance with sections 0.457 and 0.459 of CFR 47, < Shenzhen Jiteng Network Technology Co., Ltd.>. requests short-term Confidentiality of following sections of this application for a period of 180 days after grant is issued. Test setup photos Internal photos User’s manual These documents contain detailed system and equipment descriptions and related information about the product, which < Shenzhen Jiteng Network Technology Co., Ltd. > considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, < Shenzhen Jiteng Network Technology Co., Ltd. > feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Signature: Name: Chang E Title: Manager

Shenzhen Jiteng Network Technology Co., Ltd. Add: Floor 7, Building B, Boton Science and Technology Park, Chaguang Road, Xili Street, Nanshan District, Shenzhen, 518055, China TEL: +86 13828767084 E-Mail: [email protected] DECLARATION OF SIMILARITY Sincerely Yours, Client’s signature Printed Name: Chang E Title: M Date: 2025-09-25 To whom it may concern Dear Sir or Madam: We,Shenzhen Jiteng Network Technology Co., Ltd., hereby declare that the product: Industrial PC, model: IX** (*Representing numbers 0-9, letters A-Z, a-z, "-" or spaces)are electrically identical with the modelIX12, which was tested by Bay Area Compliance Laboratories Corp.(Dongguan)with the same electromagnetic emissions and electromagnetic compatibility characteristics. A description of the differences between these models and that are declared similar are as follows: They are the same product, and just the different model name and sales channels the rest are the same. Please contact me should there be need for any additional clarification or information. anager

Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502V72215E-RF-EXP Page 1 / 6 EUT EXTERNAL PHOTOS Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502V72215E-RF-EXP Page 2 / 6 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502V72215E-RF-EXP Page 3 / 6 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502V72215E-RF-EXP Page 4 / 6 Wi-Fi Antenna 1(Chain 1) Port Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502V72215E-RF-EXP Page 5 / 6 Wi-Fi Antenna 0(Chain 0) & Bluetooth Antenna Port Wi-Fi Antenna 0(Chain 0) & Bluetooth Antenna Wi-Fi Antenna 1 (Chain 1) Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502V72215E-RF-EXP Page 6 / 6 Adapter *****END ***** Wi-Fi Antenna 0 (Chain 0) & Bluetooth Antenna Wi-Fi Antenna 1 (Chain 1)

53mm Product Name/製品名: Industrial PC/産業用ミニPC Regulatory Model/規制モデル: IX12 Electrical Rating/電気定格: 12V 4A FCC ID：2AY4C-GIX01 Manufac turer/製造元: Shenzhen Jit eng Network Technology Co., Ltd. Made in China/中国製 Use only power supplies listed in the user instructions. 45mm 211-250826 /カスタマーサポート     

MAXIMUM PERMISSIBLE EXPOSURE EVALUATION REPORT Applicant: Shenzhen Jiteng Network Technology Co., Ltd. Address: Floor 7, Building B, Boton Science and Technology Park, Chaguang Road, Xili Street, Nanshan District, Shenzhen China P r o d u c t N a m e : Industrial PC F C C I D : 2AY4C-GIX01 Standard(s): 47 CFR §1.1310, 47 CFR §2.1091, 47 CFR §15.247(i), 47 CFR §15.407(f) Report Number: 2502V72215E-RF-00F Report Date: 2025/9/23 The above device has been tested and found compliant with the requirement of the relevant standards by Bay Area Compliance Laboratories Corp. (Dongguan). Reviewed By: Alice Tan Approved By: Pedro Yun Title: RF Engineer Title: RF Supervisor Bay Area Compliance Laboratories Corp. (Dongguan) No.12, Pulong East 1 st Road, Tangxia Town, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: The information marked ▲ is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with ★.This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Each test item follows the test standard(s) without deviation. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502V72215E-RF-00F Report Template Version: FCC §2.1091-V1.0 Page 2 of 6 CONTENTS DOCUMENT REVISION HISTORY ................................................................................................ 3 1. GENERAL INFORMATION .......................................................................................................... 4 1.1 GENERAL DESCRIPTION OF EQUIPMENT UNDER TEST .......................................................................... 4 1.2 ACCESSORY INFORMATION ...................................................................................................................... 4 2.RF EXPOSURE EVALUATION (MPE) ......................................................................................... 5 2.1. RF EXPOSURE EVALUATION ................................................................................................................... 5 2.1.1 Applicable Standard ............................................................................................................................................. 5 2.1.2 Calculation formula .............................................................................................................................................. 5 2.1.3 Calculated Data: ................................................................................................................................................... 5 EXHIBIT A - EUT PHOTOGRAPHS ................................................................................................ 6 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502V72215E-RF-00F Report Template Version: FCC §2.1091-V1.0 Page 3 of 6 DOCUMENT REVISION HISTORY Revision Number Report Number Description of Revision Date of Revision 1.0 2502V72215E-RF-00F Original Report 2025/9/23 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502V72215E-RF-00F Report Template Version: FCC §2.1091-V1.0 Page 4 of 6 1. GENERAL INFORMATION 1.1 General Description Of Equipment under Test Trade Name: GEEKOM EUT Name: Industrial PC EUT Model: IX12 Multiple Model: IX** (*Representing numbers 0-9, letters A-Z, a-z, "-" or spaces) Rated Input Voltage: DC 12V from Adapter EUT Received Date: 2025/7/31 EUT Received Status: Good Note: The multiple models are electrically identical with the test model. Please refer to the declaration letter for more detail, which was provided by manufacturer. 1.2 Accessory Information Accessory Description Manufacturer Model Parameters Adapter Shenzhen Xinspower Technology Co., Ltd A484-12040001 Input: AC 100-240V-50/60Hz 1.5A Output: DC 12.0V,4.0A 48.0W Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502V72215E-RF-00F Report Template Version: FCC §2.1091-V1.0 Page 5 of 6 2.RF EXPOSURE EVALUATION (MPE) 2.1. RF Exposure Evaluation 2.1.1 Applicable Standard According to subpart 15.247(i), 15.407(f) and subpart §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1500 / / f/1500 30 1500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According to §1.1310 and §2.1091 RF exposure is calculated. 2.1.2 Calculation formula Prediction of power density at the distance of the applicable MPE limit S = PG/4R² = power density (in appropriate units, e.g. mW/cm 2 ); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); 2.1.3 Calculated Data: Operation Modes Frequency (MHz) Antenna Gain ▲ Conducted output power including Tune-up Tolerance ▲ Evaluation Distance (cm) Power Density …

Text truncated - open the document above for the full version.

TEST REPORT Applicant: Shenzhen Jiteng Network Technology Co., Ltd. Address: Floor 7, Building B, Boton Science and Technology Park, Chaguang Road, Xili Street, Nanshan District, Shenzhen China P r o d u c t N a m e : Industrial PC F C C I D : 2AY4C-GIX01 Standard(s): 47 CFR Part 15, Subpart C(15.247) ANSI C63.10-2020+Cor. 1-2023+C63.10a-2024 + Errata to C63.10a-2024 ★ KDB 558074 D01 15.247 Meas Guidance v05r02 Report Number: 2502V72215E-RF-00A Report Date: 2025/9/19 The above device has been tested and found compliant with the requirement of the relevant standards by Bay Area Compliance Laboratories Corp. (Dongguan). Reviewed By: Alice Tan Approved By: Pedro Yun Title: RF Engineer Title: RF Supervisor Bay Area Compliance Laboratories Corp. (Dongguan) No.12, Pulong East 1 st Road, Tangxia Town, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: The information marked ▲ is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with ★.This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Each test item follows the test standard(s) without deviation. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:2502V72215E-RF-00A Report Template Version: FCC-BLE-V2.3 Page 2 of 54 CONTENTS DOCUMENT REVISION HISTORY ................................................................................................. 4 1. GENERAL INFORMATION ........................................................................................................... 5 1.1 GENERAL DESCRIPTION OF EQUIPMENT UNDER TEST ............................................................................ 5 1.2 ACCESSORY INFORMATION ........................................................................................................................ 5 1.3 ANTENNA INFORMATION DETAIL▲ .......................................................................................................... 5 1.4 EQUIPMENT MODIFICATIONS ..................................................................................................................... 5 2. SUMMARY OF TEST RESULTS ................................................................................................... 6 3. DESCRIPTION OF TEST CONFIGURATION ............................................................................ 7 3.1 OPERATION FREQUENCY DETAIL .............................................................................................................. 7 3.2 EUT OPERATION CONDITION .................................................................................................................... 7 3.3 SUPPORT EQUIPMENT LIST AND DETAILS ................................................................................................. 8 3.4 SUPPORT CABLE LIST AND DETAILS .......................................................................................................... 8 3.5 BLOCK DIAGRAM OF TEST SETUP .............................................................................................................. 9 3.6 TEST FACILITY .......................................................................................................................................... 10 3.7 MEASUREMENT UNCERTAINTY ................................................................................................................ 10 4. REQUIREMENTS AND TEST PROCEDURES ......................................................................... 11 4.1 AC LINE CONDUCTED EMISSIONS ........................................................................................................... 11 4.1.1 Applicable Standard ............................................................................................................................................ 11 4.1.2 EUT Setup ........................................................................................................................................................... 12 4.1.3 EMI Test Receiver Setup .................................................................................................................................... 12 4.1.4 Test Procedure ..................................................................................................................................................... 13 4.1.5 Corrected Result& Margin Calculation ............................................................................................................... 13 4.1.6 Test Result ........................................................................................................................................................... 13 4.2 RADIATION SPURIOUS EMISSIONS ............................................................................................................ 14 4.2.1 Applicable Standard ............................................................................................................................................ 14 4.2.2 EUT Setup ........................................................................................................................................................... 14 4.2.3 EMI Test Receiver & Spectrum Analyzer Setup ................................................................................................. 16 4.2.4 Test Procedure .............................................................................…

Text truncated - open the document above for the full version.

TEST REPORT Applicant: Shenzhen Jiteng Network Technology Co., Ltd. Address: Floor 7, Building B, Boton Science and Technology Park, Chaguang Road, Xili Street, Nanshan District, Shenzhen China P r o d u c t N a m e : Industrial PC F C C I D : 2AY4C-GIX01 Standard(s): 47 CFR Part 15, Subpart C(15.247) ANSI C63.10-2020 KDB 558074 D01 15.247 Meas Guidance v05r02 Report Number: 2502V72215E-RF-00C Report Date: 2025/9/28 The above device has been tested and found compliant with the requirement of the relevant standards by Bay Area Compliance Laboratories Corp. (Dongguan). Reviewed By: Alice Tan Approved By: Pedro Yun Title: RF Engineer Title: RF Supervisor Bay Area Compliance Laboratories Corp. (Dongguan) No.12, Pulong East 1 st Road, Tangxia Town, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: The information marked ▲ is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with ★.This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Each test item follows the test standard(s) without deviation. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502V72215E-RF-00C Report Template Version: FCC-Wi-Fi-V2.3 Page 2 of 107 CONTENTS DOCUMENT REVISION HISTORY ······································································· 4 1. GENERAL INFORMATION ·············································································· 5 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ·············································· 5 1.2 ACCESSORY INFORMATION·························································································· 5 1.3 ANTENNA INFORMATION DETAIL▲ ··············································································· 5 1.4 EQUIPMENT MODIFICATIONS ······················································································· 6 2. SUMMARY OF TEST RESULTS ········································································ 7 3. DESCRIPTION OF TEST CONFIGURATION ······················································· 8 3.1 OPERATION FREQUENCY DETAIL ·················································································· 8 3.2 EUT OPERATION CONDITION ······················································································· 8 3.3 SUPPORT EQUIPMENT LIST AND DETAILS ········································································ 9 3.4 SUPPORT CABLE LIST AND DETAILS ············································································· 10 3.5 BLOCK DIAGRAM OF TEST SETUP ··············································································· 11 3.6 TEST FACILITY ······································································································· 12 3.7 MEASUREMENT UNCERTAINTY ··················································································· 12 4. REQUIREMENTS AND TEST PROCEDURES ····················································· 13 4.1 AC LINE CONDUCTED EMISSIONS ··············································································· 13 4.1.1 Applicable Standard ········································································································ 13 4.1.2 EUT Setup ··················································································································· 14 4.1.3 EMI Test Receiver Setup ·································································································· 14 4.1.4 Test Procedure ·············································································································· 15 4.1.5 Corrected Amplitude & Margin Calculation ············································································ 15 4.1.6 Test Result ··················································································································· 15 4.2 RADIATION SPURIOUS EMISSIONS ··············································································· 16 4.2.1 Applicable Standard ········································································································ 16 4.2.2 EUT Setup ··················································································································· 16 4.2.3 EMI Test Receiver & Spectrum Analyzer Setup ······································································· 18 4.2.4 Test Procedure ·············································································································· 19 4.2.5 Corrected Result& Margin Calculation ·················································································· 19 4.2.6 Test Result ··················································································································· 19 4.3 MINIMUM 6 DB EMISSION BANDWIDTH ········································································· 20 4.3.1 Applicable Standard ········································································································ 20 4.3.2 EUT Setup ··················································································································· 20 4.3.3 Test Procedure ·············································································································· 20 4.3.4 Test Result ···························…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502V72215E-RF-00C Report Template Version: FCC-Wi-Fi-V2.3 Page 97 of 107 802.11n20_2412MHz_Chain 1 802.11n20_2437MHz_Chain 1 802.11n20_2437MHz_Chain 1 802.11n20_2462MHz_Chain 1 802.11n20_2462MHz_Chain 1 802.11n20_2462MHz_Chain 1 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502V72215E-RF-00C Report Template Version: FCC-Wi-Fi-V2.3 Page 98 of 107 Chain 0 802.11n40_2422MHz_Chain 0 802.11n40_2422MHz_Chain 0 802.11n40_2422MHz_Chain 0 802.11n40_2437MHz_Chain 0 802.11n40_2437MHz_Chain 0 802.11n40_2452MHz_Chain 0 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502V72215E-RF-00C Report Template Version: FCC-Wi-Fi-V2.3 Page 99 of 107 802.11n40_2452MHz_Chain 0 802.11n40_2452MHz_Chain 0 Chain 1 802.11n40_2422MHz_Chain 1 802.11n40_2422MHz_Chain 1 802.11n40_2422MHz_Chain 1 802.11n40_2437MHz_Chain 1 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502V72215E-RF-00C Report Template Version: FCC-Wi-Fi-V2.3 Page 100 of 107 802.11n40_2437MHz_Chain 1 802.11n40_2452MHz_Chain 1 802.11n40_2452MHz_Chain 1 802.11n40_2452MHz_Chain 1 Chain 0 802.11ax20_2412MHz_Chain 0 802.11ax20_2412MHz_Chain 0 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502V72215E-RF-00C Report Template Version: FCC-Wi-Fi-V2.3 Page 101 of 107 802.11ax20_2412MHz_Chain 0 802.11ax20_2437MHz_Chain 0 802.11ax20_2437MHz_Chain 0 802.11ax20_2462MHz_Chain 0 802.11ax20_2462MHz_RU_Full_Chain 0 802.11ax20_2462MHz_RU_Full_Chain 0 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502V72215E-RF-00C Report Template Version: FCC-Wi-Fi-V2.3 Page 102 of 107 Chain 1 802.11ax20_2412MHz_Chain 1 802.11ax20_2412MHz_Chain 1 802.11ax20_2412MHz_Chain 1 802.11ax20_2437MHz_Chain 1 802.11ax20_2437MHz_Chain 1 802.11ax20_2462MHz_Chain 1 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502V72215E-RF-00C Report Template Version: FCC-Wi-Fi-V2.3 Page 103 of 107 802.11ax20_2462MHz_Chain 1 802.11ax20_2462MHz_Chain 1 Chain 0 802.11ax40_2422MHz_Chain 0 802.11ax40_2422MHz_Chain 0 802.11ax40_2422MHz_Chain 0 802.11ax40_2437MHz_Chain 0 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502V72215E-RF-00C Report Template Version: FCC-Wi-Fi-V2.3 Page 104 of 107 802.11ax40_2437MHz_Chain 0 802.11ax40_2452MHz_Chain 0 802.11ax40_2452MHz_Chain 0 802.11ax40_2452MHz_Chain 0 Chain 1 802.11ax40_2422MHz_Chain 1 802.11ax40_2422MHz_Chain 1 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502V72215E-RF-00C Report Template Version: FCC-Wi-Fi-V2.3 Page 105 of 107 802.11ax40_2422MHz_Chain 1 802.11ax40_2437MHz_Chain 1 802.11ax40_2437MHz_Chain 1 802.11ax40_2452MHz_Chain 1 802.11ax40_2452MHz_Chain 1 802.11ax40_2452MHz_Chain 1 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502V72215E-RF-00C Report Template Version: FCC-Wi-Fi-V2.3 Page 106 of 107 EXHIBIT A - EUT PHOTOGRAPHS Please refer to the attachment 2502V72215E-RF-EXP EUT EXTERNAL PHOTOGRAPHS and 2502V72215E-RF-INP EUT INTERNAL PHOTOGRAPHS. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502V72215E-RF-00C Report Template Version: FCC-Wi-Fi-V2.3 Page 107 of 107 EXHIBIT B - TEST SETUP PHOTOGRAPHS Please refer to the attachment 2502V72215E-RF-00A-TSP TEST SETUP PHOTOGRAPHS. ***** END OF REPORT *****

深圳市亿圣邦科技有限公司第 1 页 深圳市亿圣邦科技有限公司 样品承认书 SPECIFICATIONFORAPPROVAL 公司名称（客户填写）：深圳市迈迪杰电子科技有限公司 物料代码（客户填写）：2.18.0379 规格型号（客户填写）：MOP07 承认日期（客户填写）： 供应商名称（SLK填写）：深圳市亿圣邦科技有限公司 供应商规格型号（SLK填写）：AUX:SLK-MDJ-B5DB-SMA/JACK-220IV-G-1.13 承认签章 供应商承认（SLK填写栏）深圳市迈迪杰电子科技有限公司 工程师…

Text truncated - open the document above for the full version.