2AY4C-GM07Mini PC

Shenzhen Jiteng Network Technology Co.,Ltd. No.1202,Bitian Pavilion, Bizhong Garden, No.10 Bibo First Street, Bibo Community Huangbei Street, Luohu District, Shenzhen City China Tel: 13828767084 Fax: NA Email: [email protected] Date: 2023-06-08 FEDERAL COMMUNICATIONS COMMISSION A uthorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear S ir/Madam, We, Shenzhen Jiteng Network Technology Co.,Ltd., hereby authorize China Certification ICT Co., Ltd (Dongguan). to act as a laboratory for testing and test report generation for the following project(s): ( Product description: Mini PC, model name: GoLite 11, FCC ID: 2AY4C-GM07) The product supports Bluetooth BDR(GFSK), EDR(π/4-DQPSK, 8DPSK) , BLE Mode,2.4G WiFi,5G WiFi, ,But for this device, only BDR/EDR/BLE 1M,2.4G WiFi(2412-2462MHz) and 5.2G WiFi(5150-5250MHz) &5.8G WiFi(5725-5850MHz) were active, the others were disabled by software. Sincerely, Signature: Printed Name: Chang E Title: Manager

ATTESTATION STATEMENT Shenzhen Jiteng Network Technology Co.,Ltd. No.1202,Bitian Pavilion, Bizhong Garden, No.10 Bibo First Street, Bibo Community Huangbei Street, Luohu District, Shenzhen City China Tel: 13828767084 Fax: NA Email: [email protected] Date: 2023-06-06 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(5)(i), (ii)Filling FCC ID: 2AY4C-GM07 Shenzhen Jiteng Network Technology Co.,Ltd. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. And Shenzhen Jiteng Network Technology Co.,Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Printed Name: Chang E Title: Manager

U.S. AGENT LETTER OF ATTESTATION Date: 2023-06-08 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2AY4C-GM07 Shenzhen Jiteng Network Technology Co.,Ltd (“the Applicant”) certifies that, as of the date of the filing of the application, COMPUTREE INC (U.S. agent). is our designated U.S. agent for service of process for the above referenced FCC ID. Shenzhen Jiteng Network Technology Co.,Ltd (“the Applicant”)accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. COMPUTREE INC (U.S. agent) accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: COMPUTREE INC. Address: 25752 W 143RD STREET, SUITE 101 PLAINFIELD, IL 60544 Plainfield, IL 60544 United States FRN: 0033653684 Tel.: (773) 226-2090 Email: [email protected] Signed by (printed name): RUJIN HUANG Signature: Applicant: Shenzhen Jiteng Network Technology Co.,Ltd. Add: 1202,Bitian Pavilion, Bizhong Garden, No.10 Bibo First Street, Bibo Community Huangbei Street, Luohu District, Shenzhen City China Tel: 13828767084 Fax: NA Email: [email protected] Signed by (printed name): Chang E CFR 47 §2.911(d)(7) U.S Agent Signature: RUJ 川 HUAN6i ：叫去

Shenzhen Jiteng Network Technology Co.,Ltd. No.1202,Bitian Pavilion, Bizhong Garden, No.10 Bibo First Street, Bibo Community Huangbei Street, Luohu District, Shenzhen City China Tel: 13828767084 Fax: NA Email: [email protected] FCC Authorization Date: 2023-06-06 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , Shenzhen Jiteng Network Technology Co.,Ltd., Hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature Printed Name: Chang E Title: Manager QA-FR-170-B

Shenzhen Jiteng Network Technology Co.,Ltd. No.1202,Bitian Pavilion, Bizhong Garden, No.10 B ibo First Street, Bibo Community Huangbei Street, Luohu District, Shenzhen City China Tel: 13828767084 Fax: NA Email: [email protected] FCC Conf idential Authorization Date: 2023- 06-08 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Sub ject: Confidentiality Request regarding application for certification of FCC ID: 2AY4C-GM07 In a ccordance with Sections 0.457 and 0.459 of the Commission’s Rules, (Shenzhen Jiteng Network Technology Co.,Ltd.) hereby requests long-term confidential treatment of information accompanying this application as outlined below: •Block Diagram •Schematics •Operation Description The a bove materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sin cerely, Sign ature: Pri nted Name: Chang E Title: Managerr QA-FR-171-A •SOFTWARE SECURITY DECLARATION FOR U-NII DEVICES

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Chip Antenna 2 RX Antenna 1 TX/RX RF Module View Chip RF Module unshielded View Chip Chip

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230527778-00C Page 58 of 58 5. MPE Based Exemption 5.1 Applicable Standard According to §1.1307(b)(3)(i) (C) Or using Table 1 and the minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. For the exemption in Table 1 to apply, R must be at least λ/2π, where λ is the free-space operating wavelength in meters. If the ERP of a single RF source is not easily obtained, then the available maximum time-averaged power may be used in lieu of ERP if the physical dimensions of the radiating structure(s) do not exceed the electrical length of λ/4 or if the antenna gain is less than that of a half-wave dipole (1.64 linear value). Table 1 to § 1.1307(b)(3)(i)(C) - Single RF Sources Subject to Routine Environmental Evaluation RF Source frequency (MHz) Threshold ERP (watts) 0.3-1.34 1,920 R 2 . 1.34-30 3,450 R 2 /f 2 . 30-300 3.83 R 2 . 300-1,500 0.0128 R 2 f. 1,500-100,000 19.2R 2 . 5.2 Measurement Result Radio Frequency (MHz) λ/2Π (mm) Distance (mm) Exemption ERP (mW) Maximum Conducted Power including Tune-up Tolerance (dBm) Antenna Gain (dBi) ERP MPE- Based Exemption dBm mW WLAN 2.4G 2412-2462 19.81 200 768 17 2.28 17.13 51.64 Compliant Bluetooth 2402-2480 19.89 200 768 7 2.28 7.13 5.16 Compliant 5.2GHz WLAN 5180-5240 9.22 200 768 15 2.95 15.80 38.02 Compliant 5.8GHz WLAN 5745-5825 8.32 200 768 15 2.75 15.60 36.31 Compliant Note: 1. The Maximum Conducted Power including Tune-up Tolerance was declared by manufacturer. 2. WLAN and Bluetooth can’t simultaneous transmit. 3. 0dBd=2.15dBi Result: The device compliant the MPE-Based Exemption at 20cm distances. ===== END OF REPORT =====

Shenzhen Yishengbang Technology Co., Ltd Antenna Test Report Customer: Project: MPC45 Product: WIFI Antenna—FPC Report date: 2023.06.09 Prepared by : Checked by : Eason Huang Approved by : 1 Purpose This report is to measure the performance of SLK for Master Antenna on . All measure data are showed below. Content 1.Product Overview 2.Test Result 2.1 VSWR/S11 2.2 Antenna Parameters 2.3 WIFI Antenna Gain/Efficiency/3D DATA 2.4 WIFI Antenna Throughput 3. Conclusions 2 1. Product Overview 3 ANT RX ANT TX 2. Test Result 2.1 VSWR/S11 4 WIFI 1 2. Test Result 2.1 VSWR/S11 5 WIFI 2 2. Test Result 2.2 Antenna Parameters 6 7 2. Test Result 2.3 WIFI Antenna Gain/Efficiency/3D DATA WIFI 1 Frequency (MHz)2400.02410.02420.02430.02440.02450.02460.02470.02480.02490.02500.05150.05350.05500.05650.05850.0 Efficiency (dBi)-3.80-3.82-3.65-3.60-3.53-3.55-3.36-3.49-3.36-3.25-3.34-3.76-3.57-3.46-3.89-3.14 Gain (dBi)1.531.531.711.701.721.612.131.631.842.042.282.952.812.012.552.75 Efficiency (%)41.6541.4743.0743.6044.3044.1546.0544.6846.0847.2146.3442.1043.9545.0740.8648.55 8 2. Test Result 2.3 WIFI Antenna Gain/Efficiency/3D DATA WIFI 2 Frequency (MHz)2400.02410.02420.02430.02440.02450.02460.02470.02480.02490.02500.05150.05350.05500.05650.05850.0 Efficiency (dBi)-3.82-3.89-3.95-3.90-3.73-3.66-3.48-3.43-3.22-3.17-3.25-3.76-3.64-3.11-3.37-3.41 Gain (dBi)2.242.151.921.751.962.502.662.832.782.732.472.872.982.432.512.02 Efficiency (%)41.4340.8140.2440.6742.3442.9744.8545.3947.6348.1947.2942.0443.2248.8346.0245.56 9 2. Test Result 2.4 WIFI Antenna Throughput 2.42.45.85.8 82.6M106M255M267M 3. Conclusions 10 Thank you

TEST REPORT Applicant: Shenzhen Jiteng Network Technology Co.,Ltd Address: No.1202,Bitian Pavilion, Bizhong Garden, No.10 Bibo First Street, Bibo Community Huangbei Street, Luohu District, Shenzhen City China FCC ID: 2AY4C-GM07 Product Name: Mini PC Standard(s): 47 CFR Part 15, Subpart C(15.247) ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230527778-00C Date Of Issue: 2023/6/14 Reviewed By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230527778-00C Page 2 of 58 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230527778-00C Page 3 of 58 CONTENTS T EST FACILITY .......................................................................................................................................... 2 DECLARATIONS .......................................................................................................................................... 2 DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 7 1.2.1 EUT Operation Condition: ............................................................................................................................. 7 1.2.2 Support Equipment List and Details .............................................................................................................. 7 1.2.3 Support Cable List and Details ...................................................................................................................... 7 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 8 1.3 MEASUREMENT UNCERTAINTY .......................................................................................................... 9 2. SUMMARY OF TEST RESULTS .......................................................................................... 10 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 11 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 11 3.1.1 Applicable Standard ..................................................................................................................................... 11 3.1.2 EUT Setup.................................................................................................................................................... 12 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 12 3.1.4 Test Procedure ............................................................................................................................................. 13 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 13 3.2 RADIATED SPURIOUS EMISSIONS ...................................................................................................... 14 3.2.1 Applicable Standard ..................................................................................................................................... 14 3.2.2 EUT Setup.................................................................................................................................................... 14 3.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 15 3.2.4 Test Procedure ............................................................................................................................................. 15 3.2.5 Corrected Amplitude & Margin Calculation ................................................................................................ 15 3.3 20 DB EMISSION BANDWIDTH ...........................................................…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Conducted Emissions Front View Conducted Emissions Side View Radiated Emission Below 1GHz View Radiated Emission Above 1GHz View