2AY58-V9-WNQ-03bird feeder camera

Wisezec Intelligent Technology Co., Ltd Room 301, No. 75 Baonan Road, Nanlian Community, Longgang Sub-district, Longgang District, Shenzhen City, China Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: Dec. 17, 25 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2AY58-V9-WNQ-03 Wisezec Intelligent Technology Co., Ltd (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Lee Jay Title: Product Manager Address: Room 301, No. 75 Baonan Road, Nanlian Community, Longgang Sub-district, Longgang District, Shenzhen City, China Tel.: 13148794122 Email: [email protected]

Wisezec Intelligent Technology Co., Ltd Room 301, No. 75 Baonan Road, Nanlian Community, Longgang Sub-district, Longgang District, Shenzhen City, China 1 | P a g e Attestation Statements To: Federal Communications Commission Date: Dec. 17, 25 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2AY58-V9-WNQ-03 Product Name: bird feeder camera This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Lee Jay Title: Product Manager Address: Room 301, No. 75 Baonan Road, Nanlian Community, Longgang Sub-district, Longgang District, Shenzhen City, China Tel.: 13148794122 Email: [email protected] Wisezec Intelligent Technology Co., Ltd Room 301, No. 75 Baonan Road, Nanlian Community, Longgang Sub-district, Longgang District, Shenzhen City, China 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☒ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check

Wisezec Intelligent Technology Co., Ltd Room 301, No. 75 Baonan Road, Nanlian Community, Longgang Sub-district, Longgang District, Shenzhen City, China Date: 2025/12/17 Dear Sir/Madam, We, Wisezec Intelligent Technology Co., Ltd, Hereby declares the following statement, PCB board, circuit, structure and internal of these model(s) are the same, Only model name is different for these model: Product name: bird feeder camera FCC ID: 2AY58-V9-WNQ-03 Model no.: V9-WNQ-03, V9-WNQ-02, V9-WNQ-01, V9-WNQ-05, V9-WNQ-06, V9-WNQ-07 Sincerely, Name/Title： Lee Jay / Product Manager Company: Wisezec Intelligent Technology Co., Ltd Address: Room 301, No. 75 Baonan Road, Nanlian Community, Longgang Sub- district, Longgang District, Shenzhen City, China Phone: 13148794122 Fax: 13148794122 E-Mail: [email protected]

Wisezec Intelligent Technology Co., Ltd Room 301, No. 75 Baonan Road, Nanlian Community, Longgang Sub-district, Longgang District, Shenzhen City, China December 17, 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2AY58-V9-WNQ-03 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of the exhibits accompanying this certification application as outlined below : ⎯ Block Diagram ⎯ Schematics ⎯ Operational Description The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Pursuant to DA 04-1705, the applicant also requests temporary confidential treatment of the exhibits outlined below for a period of 45 days from the date of equipment authorization and prior to marketing in the United States to prevent the premature release of any sensitive information. Applicant is aware of their responsibility to notify DERYCOM in the event information regarding the product or the product is made available to the public before the requested period has expired. ⎯ User Manual ⎯ Internal Photos Sincerely, Title: Product Manager Address: Room 301, No. 75 Baonan Road, Nanlian Community, Longgang Sub-district, Longgang District, Shenzhen City, China Tel.: 13148794122 Email: [email protected]

Wisezec Intelligent Technology Co., Ltd Room 301, No. 75 Baonan Road, Nanlian Community, Longgang Sub-district, Longgang District, Shenzhen City, China December 17, 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2AY58-V9-WNQ-03 I, the undersigned, hereby authorize Shenzhen Tongzhou Testing Co.,Ltd. to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by Shenzhen Tongzhou Testing Co.,Ltd. shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with Wisezec Intelligent Technology Co., Ltd. We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, Lee Jay Product Manager Tel: 13148794122 Fax: 13148794122 Email: [email protected]

Report No.: TZ0289251101PH02 Page 1 of 5 Exterior Photographs of EUT Figure 1 Figure 2 Report No.: TZ0289251101PH02 Page 2 of 5 Figure 3 Figure 4 Report No.: TZ0289251101PH02 Page 3 of 5 Figure 5 Figure 6 Report No.: TZ0289251101PH02 Page 4 of 5 Figure 7 Figure 8 Report No.: TZ0289251101PH02 Page 5 of 5 Figure 9

Label Location FCC ID: 2AY58-V9-WNQ-03

Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AY58-V9-WNQ-03 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 1 of 2 RADIO FREQUENCY EXPOSURE Limit According to section B.4 of 447498 D04 Interim General RF Exposure Guidance v01 SAR-based thresholds are derived based on frequency, power, and separation distance of the RF source. The formula defines the thresholds in general for either available maximum time-averaged power or maximum time-averaged ERP, whichever is greater. If the ERP of a device is not easily determined, such as for a portable device with a small form factor, the applicant may use the available maximum time-averaged power exclusively if the device antenna or radiating structure does not exceed an electrical length of λ/4. As for devices with antennas of length greater than λ/4 where the gain is not well defined, but always less than that of a half-wave dipole (length λ/2), the available maximum time-averaged power generated by the device may be used in place of the maximum time-averaged ERP, where that value is not known. The separation distance is the smallest distance from any part of the antenna or radiating structure for all persons, during operation at the applicable ERP. In the case of mobile or portable devices, the separation distance is from the outer housing of the device where it is closest to the antenna. The SAR-based exemption formula of § 1.1307(b)(3)(i)(B), repeated here as Formula (B.2), applies for single fixed, mobile, and portable RF sources with available maximum time-averaged power or effective radiated power (ERP), whichever is greater, of less than or equal to the threshold Pth (mW). This method shall only be used at separation distances from 0.5 cm to 40 cm and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by Formula (B.2). Where and f is in GHz, d is the separation distance (cm), and ERP 20cm is per Formula (B.1). Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AY58-V9-WNQ-03 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 2 of 2 Results BLE: RF Exposure at Separation distance (cm): 20 Mode Antenna Frequency [MHz] Conducted Power [dBm] Manufacturing tolerance Antenna Gain [dBi] Max of ERP and Conducted Power including Tune Up SAR-based exemption threshold Pth [mW] Target Power [dBm] Tolerance ±[dB] [dBm] [mW] BLE_1M Ant1 2402 1.83 1.5 1 0.5 2.5 1.78 3060.00 BLE_1M Ant1 2440 2.46 2 1 0.5 3 2.00 3060.00 BLE_1M Ant1 2480 2.31 2 1 0.5 3 2.00 3060.00 BLE_2M Ant1 2402 1.76 1.5 1 0.5 2.5 1.78 3060.00 BLE_2M Ant1 2440 2.42 2 1 0.5 3 2.00 3060.00 BLE_2M Ant1 2480 2.25 2 1 0.5 3 2.00 3060.00 2.4G: RF Exposure at Separation distance (cm): 20 Mode Antenna Frequency [MHz] Conducted Power [dBm] Manufacturing tolerance Antenna Gain [dBi] Max of ERP and Conducted Power including Tune Up SAR-based exemption threshold Pth [mW] Target Power [dBm] Tolerance ±[dB] [dBm] [mW] 11B Ant1 2412 12.28 12 1 5.42 16.27 42.36 3060.00 11B Ant1 2437 13.42 13 1 5.42 17.27 53.33 3060.00 11B Ant1 2462 11.51 11 1 5.42 15.27 33.65 3060.00 11G Ant1 2412 11.68 11 1 5.42 15.27 33.65 3060.00 11G Ant1 2437 12.57 12 1 5.42 16.27 42.36 3060.00 11G Ant1 2462 11.3 11 1 5.42 15.27 33.65 3060.00 11N20SISO Ant1 2412 11.61 11 1 5.42 15.27 33.65 3060.00 11N20SISO Ant1 2437 13.08 12.5 1 5.42 16.77 47.53 3060.00 11N20SISO Ant1 2462 11.27 11 1 5.42 15.27 33.65 3060.00 Max of ERP and Conducted Power including Tune Up (dBm) = Max Conducted Tune Up Power(dBm) and Max Conducted Tune Up Power(dBm) + Antenna Gain(dBi)-2.15), whichever is greater. The Maximum Erp is used for Routine Evaluation Exemption according to B.4 of 447498 D04 Interim General RF Exposure Guidance v01. So, the SAR evaluation is not required.

深圳市中技天线有限公司 地址：东莞市塘厦镇诸佛岭佛兴街1号2楼 承 认 书 SPECIFICATION FOR APPROVAL 客 户 名 称 CUSTOMER NAME: 产 品 名 称 PRODUCT NAME: 2.4G 5dBi SMA公头母针白色天线 客 户 料 号 CUSTOMER P/N: 公司料号 P/N: 22S00004A REV: A MANUFACTURER SIGNATURE CUSTOMER SIGNATURE CHECKED BY: 钟礼兴 AUDITOR BY: 郑 磊 APPROVED BY: 符 进 DATE: 2023/3/17 深圳市中技天线有限公司 地址：东莞市塘厦镇诸佛岭佛兴街1号2楼 Contents ltem Description 1.---------------------------------------------------------------规格表 2.---------------------------------------------------------------成品图 3.---------------------------------------------------------------测试报告 深圳市中技天线有限公司 地址：东莞市塘厦镇诸佛岭佛兴街1号2楼 1．规格表: 产品主要技术参数 主要技术指标 Main technical specifications 频率范围 （MHZ） 2400~2500 Frequency Range (MHZ) 2400~2500 特性阻抗(Ω) 50±10 Impedance(Ω) 50±10 增益(dBi) 5±0.5 Gain(dBi) 5±0.5 输出电压 驻波比 ≤2.0 VSWR ≤2.0 最大功率 10W Admitted Power 10W 极化方式 垂直极化 Polarization Linear,Vertical 连接方式 SMA Connector Type SMA 物理性能 Physical Properties 天线本体材料 TPEE Antenna Base TPEE 工作温度 -20°C~+65°C Operating Temp -20°C~+65°C 保存温度 -30°C~+75°C Storage Temp -30°C~+75°C 深圳市中技天线有限公司 地址：东莞市塘厦镇诸佛岭佛兴街1号2楼 2．成品图： 深圳市中技天线有限公司 地址：东莞市塘厦镇诸佛岭佛兴街1号2楼 3.测试报告 3.1：网络分析仪测试报告 深圳市中技天线有限公司 地址：东莞市塘厦镇诸佛岭佛兴街1号2楼 3.2：暗室2D、3DRaditation Pattern 2.4GHz Peak Gain: 5.34dBi Efficiency:71.48% 2.45GHz Peak Gain: 5.42dBi Efficiency: 74.21% 2.5GHz Peak Gain: 5.40dBi Efficiency: 70.16%

$QWHQQDGHVFULEH $QWHQQDGHVFULEH $QWHQQDSODWH PCB Antenna 0DNHQDPHPRGHOQDPH CG625 $QWHQQDJDLQ 0.5G%L )UHTXHQF\UDQJH*+=*+= manufacturer SHENZHEN HOPESEARCH PCB MANUFACTURING CO.,LTD ([WHUQDOYLHZGUDZLQJ 3LFWXUHRIDQWHQQD $QWHQQD5DGLDWLRQ3DWWHUQ 5DGLDWLRQSDWWHUQ#*+= 7RWDOPeak*DLQ0.5GEL 3KL *DLQ 0.5  018 0.26  5DGLDWLRQSDWWHUQ#*+= 7RWDOPeak*DLQ47GEL 3KL *DLQ  0.47  0.25  5DGLDWLRQSDWWHUQ#*+= 7RWDOPeak*DLQGEL 3KL *DLQ  0.237 

Appendix Test Data of the Report No.: TZ0289251101FRF02 Page 1 of 33 Appendix Test Data for BLE (Conducted Measurement) Product Name: bird feeder camera Trade Mark: / Test Model: V9-WNQ-03 FCC ID: 2AY58-V9-WNQ-03 Environmental Conditions Temperature: 23.5°C Relative Humidity: 58% ATM Pressure: 100.0 kPa Test Engineer: Allen Lai Supervised by: Max Zhang NOTE N/A Appendix A: DTS Bandwidth Test Result Test Mode Antenna Frequency [MHz] DTS BW [MHz] FL [MHz] FH [MHz] Limit [MHz] Verdict BLE_1M Ant1 2402 0.648 2401.672 2402.320 0.5 PASS BLE_1M Ant1 2440 0.648 2439.672 2440.320 0.5 PASS BLE_1M Ant1 2480 0.648 2479.676 2480.324 0.5 PASS BLE_2M Ant1 2402 1.092 2401.444 2402.536 0.5 PASS BLE_2M Ant1 2440 1.092 2439.420 2440.512 0.5 PASS BLE_2M Ant1 2480 1.144 2479.428 2480.572 0.5 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0289251101FRF02 Page 2 of 33 Test Graphs BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2440-PASS Appendix Test Data of the Report No.: TZ0289251101FRF02 Page 3 of 33 BLE_1M-Ant1-2480-PASS BLE_2M-Ant1-2402-PASS Appendix Test Data of the Report No.: TZ0289251101FRF02 Page 4 of 33 BLE_2M-Ant1-2440-PASS BLE_2M-Ant1-2480-PASS Appendix Test Data of the Report No.: TZ0289251101FRF02 Page 5 of 33 Appendix B: Occupied Channel Bandwidth Test Result Test Mode Antenna Frequency [MHz] OCB [MHz] FL [MHz] FH [MHz] Limit [MHz] Verdict BLE_1M Ant1 2402 1.0109 2401.5000 2402.5109 --- --- BLE_1M Ant1 2440 1.0096 2439.5053 2440.5149 --- --- BLE_1M Ant1 2480 1.0107 2479.5029 2480.5136 --- --- BLE_2M Ant1 2402 2.0249 2401.0067 2403.0316 --- --- BLE_2M Ant1 2440 2.0174 2439.0022 2441.0196 --- --- BLE_2M Ant1 2480 2.0104 2479.0125 2481.0229 --- --- Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0289251101FRF02 Page 6 of 33 Test Graphs BLE_1M-Ant1-2402 BLE_1M-Ant1-2440 Appendix Test Data of the Report No.: TZ0289251101FRF02 Page 7 of 33 BLE_1M-Ant1-2480 BLE_2M-Ant1-2402 Appendix Test Data of the Report No.: TZ0289251101FRF02 Page 8 of 33 BLE_2M-Ant1-2440 BLE_2M-Ant1-2480 Appendix Test Data of the Report No.: TZ0289251101FRF02 Page 9 of 33 Appendix C: Maximum peak conducted output power Test Result Peak Test Mode Antenna Frequency [MHz] Conducted Peak Power [dBm] Conducted Limit [dBm] Verdict BLE_1M Ant1 2402 1.83 ≤30 PASS BLE_1M Ant1 2440 2.46 ≤30 PASS BLE_1M Ant1 2480 2.31 ≤30 PASS BLE_2M Ant1 2402 1.76 ≤30 PASS BLE_2M Ant1 2440 2.42 ≤30 PASS BLE_2M Ant1 2480 2.25 ≤30 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0289251101FRF02 Page 10 of 33 Test Graphs Peak BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2440-PASS Appendix Test Data of the Report No.: TZ0289251101FRF02 Page 11 of 33 BLE_1M-Ant1-2480-PASS BLE_2M-Ant1-2402-PASS Appendix Test Data of the Report No.: TZ0289251101FRF02 Page 12 of 33 BLE_2M-Ant1-2440-PASS BLE_2M-Ant1-2480-PASS Appendix Test Data of the Report No.: TZ0289251101FRF02 Page 13 of 33 Appendix D: Maximum peak power spectral density Test Result Test Mode Antenna Frequency [MHz] Result [dBm/3kHz] Limit [dBm/3kHz] Verdict BLE_1M Ant1 2402 -13.78 ≤8.00 PASS BLE_1M Ant1 2440 -13.19 ≤8.00 PASS BLE_1M Ant1 2480 -13.20 ≤8.00 PASS BLE_2M Ant1 2402 -16.89 ≤8.00 PASS BLE_2M Ant1 2440 -16.35 ≤8.00 PASS BLE_2M Ant1 2480 -16.41 ≤8.00 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0289251101FRF02 Page 14 of 33 Test Graphs BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2440-PASS Appendix Test Data of the Report No.: TZ0289251101FRF02 Page 15 of 33 BLE_1M-Ant1-2480-PASS BLE_2M-Ant1-2402-PASS Appendix Test Data of the Report No.: TZ0289251101FRF02 Page 16 of 33 BLE_2M-Ant1-2440-PASS BLE_2M-Ant1-2480-PASS Appendix Test Data of the Report No.: TZ0289251101FRF02 Page 17 of 33 Appendix E: Band edge measurements Test Result Test Mode Antenna Ch. Name Frequency [MHz] Ref. Level [dBm] Result [dBm] Limit [dBm] Verdict BLE_1M Ant1 Low 2402 1.53 -43.02 ≤-18.47 PASS BLE_1M Ant1 High 2480 2.05 -48.3 ≤-17.96 PASS BLE_2M Ant1 Low 2402 1.33 -33.51 ≤-18.68 PASS BLE_2M Ant1 High 2480 1.27 -47.82 ≤-18.73 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0289251101FRF02 Page 18 of 33 Test Graphs BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2480-PASS Appendix Test Data of the Report No.: TZ0289251101FRF02 Page 19 of 33 BLE_2M-Ant1-2402-PASS BLE_2M-Ant1-2480-PASS Appendix Test Data of the Report No.: TZ0289251101FRF02 Page 20 of 33 Appendix F: Conducted Spurious Emission Test Result Test Mode Antenna Frequency [MHz] Freq. Range [MHz] Ref. Level [dBm] Result [dBm] Limit [dBm] Verdict BLE_1M Ant1 2402 0~Reference 1.35 1.35 --- PASS BLE_1M Ant1 2402 30~1000 1.35 -52.55 ≤-18.65 PASS BLE_1M Ant1 2402 1000~26500 1.35 -26.85 ≤-18.65 PASS BLE_1M Ant1 2440 0~Reference 1.91 1.91 --- PASS BLE_1M Ant1 2440 30~1000 1.91 -52.93 ≤-18.09 PASS BLE_1M Ant1 2440 1000~26500 1.91 -27.71 ≤-18.09 PASS BLE_1M Ant1 2480 0~Reference 1.84 1.84 --- PASS BLE_1M Ant1 2480 30~1000 1.84 -52.82 ≤-18.16 PASS BLE_1M Ant1 2480 1000~26500 1.84 -28.06 ≤-18.16 PASS BLE_2M Ant1 2402 0~Reference 1.30 1.30 --- PASS BLE_2M Ant1 2402 30~1000 1.30 -52.53 ≤-18.7 PASS BLE_2M Ant1 2402 1000~26500 1.30 -27.82 ≤-18.7 PASS BLE_2M Ant1 2440 0~Reference 1.91 1.91 --- PASS BLE_2M Ant1 2440 30~1000 1.91 -53.09 ≤-18.09 PASS BLE_2M Ant1 2440 1000~26500 1.91 -27.99 ≤-18.09 PASS BLE_2M Ant1 2480 0~Reference 1.80 1.80 --- PASS BLE_2M Ant1 2480 30~1000 1.80 -52.66 ≤-18.2 PASS BLE_2M Ant1 2480 1000~26500 1.80 -27.68 ≤-18.2 PASS Note: offset(dB) in Reference test plots = cable loss(dB) + attenuator factor(dB); For spurious emissions plots from 30MHz to 26.5GHz, the cable loss and attenuator factors have been set in the 'Input Correction' of the Spectrum Analyzer during the test. Appendix Test Data of the Report No.: TZ0289251101FRF02 Page 21 of 33 Test Graphs BLE_1M-Ant1-2402-0~Reference-PASS BLE_1M-Ant1-2402-30~1000-PASS Appendix Test Data of the Report N…

Text truncated - open the document above for the full version.

Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 1 of 44 Appendix Test Data for WLAN(2. 4G) (Conducted Measurement) Product Name: bird feeder camera Trade Mark: / Test Model: V9-WNQ-03 FCC ID: 2AY58-V9-WNQ-03 Environmental Conditions Temperature: 23.5°C Relative Humidity: 58% ATM Pressure: 100.0 kPa Test Engineer: Allen Lai Supervised by: Max Zhang NOTE N/A Appendix A: DTS Bandwidth Test Result Test Mode Antenna Frequency [MHz] DTS BW [MHz] FL [MHz] FH [MHz] Limit [MHz] Verdict 11B Ant1 2412 10.200 2406.920 2417.120 0.5 PASS 11B Ant1 2437 10.120 2431.960 2442.080 0.5 PASS 11B Ant1 2462 10.160 2456.960 2467.120 0.5 PASS 11G Ant1 2412 16.440 2403.800 2420.240 0.5 PASS 11G Ant1 2437 16.520 2428.680 2445.200 0.5 PASS 11G Ant1 2462 16.400 2453.840 2470.240 0.5 PASS 11N20SISO Ant1 2412 17.680 2403.200 2420.880 0.5 PASS 11N20SISO Ant1 2437 17.600 2428.200 2445.800 0.5 PASS 11N20SISO Ant1 2462 17.640 2453.200 2470.840 0.5 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 2 of 44 Test Graphs 11B-Ant1-2412-PASS 11B-Ant1-2437-PASS Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 3 of 44 11B-Ant1-2462-PASS 11G-Ant1-2412-PASS Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 4 of 44 11G-Ant1-2437-PASS 11G-Ant1-2462-PASS Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 5 of 44 11N20SISO-Ant1-2412-PASS 11N20SISO-Ant1-2437-PASS Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 6 of 44 11N20SISO-Ant1-2462-PASS Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 7 of 44 Appendix B: Occupied Channel Bandwidth Test Result Test Mode Antenna Channel Frequency [MHz] OCB [MHz] FL [MHz] FH [MHz] Limit [MHz] Verdict 11B Ant1 2412 13.311 2405.3779 2418.6889 --- --- 11B Ant1 2437 13.201 2430.3683 2443.5693 --- --- 11B Ant1 2462 13.308 2455.4092 2468.7172 --- --- 11G Ant1 2412 16.845 2403.5760 2420.4210 --- --- 11G Ant1 2437 16.756 2428.6006 2445.3566 --- --- 11G Ant1 2462 16.876 2453.6014 2470.4774 --- --- 11N20SISO Ant1 2412 17.824 2403.1055 2420.9295 --- --- 11N20SISO Ant1 2437 17.765 2428.1192 2445.8842 --- --- 11N20SISO Ant1 2462 17.820 2453.1293 2470.9493 --- --- Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 8 of 44 Test Graphs 11B-Ant1-2412 11B-Ant1-2437 Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 9 of 44 11B-Ant1-2462 11G-Ant1-2412 Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 10 of 44 11G-Ant1-2437 11G-Ant1-2462 Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 11 of 44 11N20SISO-Ant1-2412 11N20SISO-Ant1-2437 Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 12 of 44 11N20SISO-Ant1-2462 Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 13 of 44 Appendix C: Maximum Average conducted output power Test Result Test Mode Antenna Frequency [MHz] Conducted Power [dBm] Conducted Limit [dBm] Verdict 11B Ant1 2412 12.28 ≤30.00 PASS 11B Ant1 2437 13.42 ≤30.00 PASS 11B Ant1 2462 11.51 ≤30.00 PASS 11G Ant1 2412 11.68 ≤30.00 PASS 11G Ant1 2437 12.57 ≤30.00 PASS 11G Ant1 2462 11.30 ≤30.00 PASS 11N20SISO Ant1 2412 11.61 ≤30.00 PASS 11N20SISO Ant1 2437 13.08 ≤30.00 PASS 11N20SISO Ant1 2462 11.27 ≤30.00 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) + Duty Cycle Factor(dB) Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 14 of 44 Appendix D: Maximum Average power spectral density Test Result Test Mode Antenna Frequency [MHz] Raw. Data [dBm/3-100kHz] Dc. Factor Result [dBm/3-100kHz] Limit [dBm/3kHz] Verdict 11B Ant1 2412 -19.38 0.00 -19.38 ≤8.00 PASS 11B Ant1 2437 -16.83 0.01 -16.82 ≤8.00 PASS 11B Ant1 2462 -19.77 0.01 -19.76 ≤8.00 PASS 11G Ant1 2412 -21.31 0.06 -21.25 ≤8.00 PASS 11G Ant1 2437 -20.75 0.06 -20.69 ≤8.00 PASS 11G Ant1 2462 -22.15 0.06 -22.09 ≤8.00 PASS 11N20SISO Ant1 2412 -22.79 0.07 -22.72 ≤8.00 PASS 11N20SISO Ant1 2437 -18.70 0.07 -18.63 ≤8.00 PASS 11N20SISO Ant1 2462 -19.37 0.07 -19.30 ≤8.00 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) + Duty Cycle Factor(dB) Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 15 of 44 Test Graphs 11B-Ant1-2412-PASS 11B-Ant1-2437-PASS Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 16 of 44 11B-Ant1-2462-PASS 11G-Ant1-2412-PASS Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 17 of 44 11G-Ant1-2437-PASS 11G-Ant1-2462-PASS Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 18 of 44 11N20SISO-Ant1-2412-PASS 11N20SISO-Ant1-2437-PASS Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 19 of 44 11N20SISO-Ant1-2462-PASS Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 20 of 44 Appendix E: Band edge measurements Test Result Test Mode Antenna Ch. Name Frequency.[M Hz] Ref. Level [dBm] Result [dBm] Limit [dBm] Verdict 11B Ant1 Low 2412 2.89 -43.54 ≤-27.11 PASS 11B Ant1 High 2462 1.91 -47.54 ≤-28.09 PASS 11G Ant1 Low 2412 0.57 -44.02 ≤-29.43 PASS 11G Ant1 High 2462 -1.37 -47.07 ≤-31.37 PASS 11N20SIS O Ant1 Low 2412 0.08 -43.64 ≤-29.92 PASS 11N20SIS O Ant1 High 2462 -0.17 -46.2 ≤-30.17 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 21 of 44 Test Graphs 11B-Ant1-2412-PASS 11B-Ant1-2462-PASS Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 22 of 44 11G-Ant1-2412-PASS 11G-Ant1-2462-PASS Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 23 of 44 11N20SISO-Ant1-2412-PASS 11N20SISO-Ant1-2462-PASS Appendix Test Data of the Report No.: TZ0289251101FRF03 Page 24 of 44 Appendix F: Conducted Spurious Emission Test Result Test Mode Antenna Frequency [MHz] Freq. Range [Mhz] Ref. Level [dBm] Result [dBm] Limit [dBm] Verdict 11B Ant1 2412 0~Reference 1.53 1.53 --- PASS 11B Ant1 2412 30~1000 1.53 -62.74 ≤-28.47 PASS 11B Ant1 2412 1000~26500 1.53 -37.81 ≤-28.47 PASS 11B Ant1 2437 0~Reference 2.67 2.67 --- PASS 11B Ant1 243…

Text truncated - open the document above for the full version.

Report No.: TZ0289251101FRF02 Page 1 of 31 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Tongzhou Testing Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Tongzhou Testing Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. The test report apply only to the specific sample(s) tested under stated test conditions. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. TEST REPORT Report Number : TZ0289251101FRF02 Product Name : bird feeder camera Model/Type reference : V9-WNQ-03, V9-WNQ-02, V9-WNQ-01, V9-WNQ-05, V9-WNQ-06, V9-WNQ-07 FCC ID : 2AY58-V9-WNQ-03 Prepared for : Wisezec Intelligent Technology Co., Ltd Room 301, No. 75 Baonan Road, Nanlian Community, Longgang Sub-district, Longgang District, Shenzhen City, China Prepared By : Shenzhen Tongzhou Testing Co.,Ltd. 1st Floor, Building 1, Haomai High-tech Park, Huating Road 387, Dalang Street, Longhua, Shenzhen, China Standards : FCC CFR Title 47 Part 15C, ANSI C63.10-2020 Date of Test : 2025-11-17 ~ 2025-12-01 Date of Issue : 2025-12-02 Prepared by : Nancy Li Reviewed by : Allen Lai Approved by : Max Zhang (Authorized Officer) Report No.: TZ0289251101FRF02 Page 2 of 31 ** Report Revise Record ** Report Version Revise Time Issued Date Valid Version Notes V1.0 / 2025-12-02 Valid Initial release Report No.: TZ0289251101FRF02 Page 3 of 31 TABLE OF CONTENTS 1. G E N E R A L I N F O R M A T I O N ........................................................ 4 1.1. Client Information ................................................................................................................... 4 1.2. Description of Device (EUT) ................................................................................................... 4 1.3. Wireless Function Tested in this Report .............................................................................. 4 1.4. EUT configuration ................................................................................................................... 5 1.5. Description of Test Facility .................................................................................................... 5 1.6. Statement of the Measurement Uncertainty ......................................................................... 6 1.7. Measurement Uncertainty ...................................................................................................... 6 1.8. Description of Test Modes ..................................................................................................... 6 1.9. Frequency of Channels .......................................................................................................... 6 2. T E S T M E T H O D O L O G Y ............................................................ 7 2.1. EUT Configuration .................................................................................................................. 7 2.2. EUT Exercise ........................................................................................................................... 7 2.3. Test Sample ............................................................................................................................. 7 3. S Y S T E M T E S T C O N F I G U R A T I O N .............................................. 8 3.1. Justification ............................................................................................................................. 8 3.2. EUT Exercise Software ........................................................................................................... 8 3.3. Special Accessories ............................................................................................................... 8 3.4. Block Diagram/Schematics .................................................................................................... 8 3.5. Equipm…

Text truncated - open the document above for the full version.