2AYARAB30Smart Key

User Manual 1 Introduction ....................................................................................................... 2 2 Product Overview ............................................................................................... 2 3 Feature/Function Requirements ........................................................................ 3 3.1 Feature/Function Requirements ........................................................................... 3 3.1.1 RKE Lock Key Fob Control ............................................................................................... 3 3.1.2 RKE Unlock Key Fob Control ............................................................................................ 3 3.1.3 RKE Searching vehicle Control .......................................................................................... 3 3.1.4 Passive Entry ...................................................................................................................... 3 3.1.5 Passive Lock ...................................................................................................................... 3 3.1.6 Passive Start ....................................................................................................................... 3 3.1.7 Backup Start ....................................................................................................................... 4 3.1.8 Emergent mechanical Key .................................................................................................. 4 3.2 Feature requirement ............................................................................................. 4 3.2.1 Switch Long Pressed Protection .......................................................................................... 4 3.2.2 High Communication Security ............................................................................................ 4 3.2.3 Unique Wake Up Pattern .................................................................................................... 4 3.2.4 Battery reversed installation protection ............................................................................... 4 1 Introduction This document defines requirements that apply to the GWM AB30 smart key. Requirements stated comprehensively in other existing documents will be referenced herein. 2 Product Overview The smart key is a NXP NCF29A1 active tag IC based device that receives the 125kHz low frequency wireless signal from Immobilizer station and KBCM ECU, and transmits radio frequency wireless signals to the KBCM ECU receiver. The general functions as follows: 1) Remote Keyless Entry - door lock, door unlock, using wireless RF fob messages. 2) Search - turn on the audible siren using wireless RF fob messages. 3) Passive Entry – open the door without press the RKE button or use the mechanical key. 4) Passive Start –ignition the engine without use the mechanical key. 5) Backup Start –ignition the engine when the smart key exhausting the battery. The diagram below shows the smart key schematic drawing. 3 Feature/Function Requirements 3.1 Feature/Function Requirements The GWM A/B30 KBCM system is designed to allow the driver to lock and unlock the vehicle door(s), and search the vehicle through RF channel, passive entry and passive start via the LF-RF channel. The system consists of PEPS, BCM, Smart Key and Immobilizer base station. The Smart Key shall perform the following functions: 1) Remote all doors unlock 2) Remote all doors lock 3) Remote search alarm 4) Passive Entry 5) Passive Lock 6) Passive Start 7) Backup Start 8) Emergent mechanical Key 3.1.1 RKE Lock Key Fob Control The RKE Lock command shall command the RKE_Lock_Request through a RF message to lock all the vehicle doors, by pressing the Lock Button. 3.1.2 RKE Unlock Key Fob Control The RKE Unlock command shall command the RKE_Unlock_Request through a RF message to unlock all the vehicle doors, by pressing the Unlock Button. 3.1.3 RKE Searching vehicle Control The RKE Searching vehicle command shall command the RKE_Search_Request through a RF message to start panic or stop searching the vehicle, by pressing the searching Button. 3.1.4 Passive Entry The driver wants to entry the vehicle to press the door handle switch, and the KBCM ECU will send an authorization command to Smart Key via LF channel. And the Smart Key will give a response via RF channel. If the authorization is passed, and the smart key is not inside the vehicle, the KBCM ECU will open the door. 3.1.5 Passive Lock The driver wants to leave the vehicle to press the door handle switch, and the KBCM ECU will send an authorization command to Smart Key via LF channel. And the Smart Key will give a response via RF channel. If the authorization is passed, and the smart key is not inside the vehicle, the KBCM ECU will lock the door. 3.1.6 Passive Start The driver wants to start the vehicle to press the SSB switch, and the KBCM ECU will send an authorization command to Smart Key via LF channel. And the Smart Key will give a response via RF channel. If the authorization is passed, and the smart key is inside the vehicle, the KBCM ECU will ask immobilizer base station to start engine. 3.1.7 Backup Start When the Smart Key exhausted the battery, the Passive Start function will be disabled. If the driver wants to start the vehicle, he shall take the smart Key close to the SSB to press the SSB. And the immobilizer transponder function of Smart Key will communicate with immobilizer base station to start the engine. 3.1.8 Emergent mechanical Key When the Smart Key exhausted the battery, the Passive Entry function will be disabled. If the driver wants to open the vehicle’ door, he shall take out the Emergent mechanical Key from smart key housing to open the door. 3.2 Feature requirement The Smart Key shall meet the following feature requirement: 1) Switch long pressed protection 2) High Communication security 3) Unique wake up pattern 4) Bat…

Text truncated - open the document above for the full version.

Kostal (Shanghai) Management Co., Ltd. 053019 – 12 Authority to Act as Agent Date: December 21, 2020 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: ______ DEKRA Testing and Certification (Suzhou) Co., Ltd.______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: _____(Typically 8 – 12 months)_____ By: __________________________ ____ Dongliang Xu ___ (Signature 1 ) (Print name) Title: ___ Project Leader ____ On behalf of: _____ Kostal (Shanghai) Management Co., Ltd. ____ (Company Name) Telephone: ____ +86-21-59570077-6221_____ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. Kostal (Shanghai) Management Co., Ltd. 053019 – 12 Request for Confidentiality Date: December 21, 2020 Subject: Confidentiality Request for: ______FCC ID：2AYARAB30 Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 9.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit ☐ Short Term ☒ Permanent Block Diagrams ☐ Short Term External Photos ☐ Short Term ☐ Permanent * 2 Internal Photos ☐ Short Term ☒ Permanent Operation Description/Theory of Operation ☐ Short Term ☐ Permanent Parts List & Placement/BOM ☐ Short Term ☐ Permanent Tune-Up Procedure ☐ Short Term ☒ Permanent Schematics ☐ Short Term Test Setup Photos ☐ Short Term ☐ Permanent * 3 User’s Manual ______ Kostal (Shanghai) Management Co., Ltd. ______ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180) 3 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By: _____ Project Leader _ ______ Dongliang Xu ______ (Signature/Title 4 ) (Print name) 2 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 3 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 4 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate Kostal (Shanghai) Management Co., Ltd. 053019 – 12 authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 20B0794R-RF-External Photo Page 1 / 3 External Photographs EUT Photo(1) EUT Photo(2) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 20B0794R-RF-External Photo Page 2 / 3 EUT Photo(3) EUT Photo(4) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 20B0794R-RF-External Photo Page 3 / 3 EUT Photo(5) EUT Photo(6)

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 20B0794R-RF-Internal Photo Page 1 / 3 Internal Photographs EUT Photo(1) EUT Photo(2) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 20B0794R-RF-Internal Photo Page 2 / 3 EUT Photo(3) EUT Photo(4) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 20B0794R-RF-Internal Photo Page 3 / 3 EUT Photo(5)

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 20B0794R-RF-US-P20V01 TEST REPORT C Rules&Requlations FCC Exposure Evaluation Declaration Product Name Smart Key Trademark , Model and /or type reference AB30 FCC ID 2AYARAB30 Applicant ́s name / address Kostal (Shanghai) Management Co., Ltd. Room 201-202 3# Building, 77 Yuan Gao Road, Jiading District Shanghai China Test method requested, standard KDB 447498D01V06 FCC Part1.1310 Verdict Summary IN COMPLIANCE Documented by (name / position & signature) Kitty Li/ Project Assistant Reviewed by (name / position & signature) Frank He/ Technical Supervisor Approved by (name / position & signature) Jack Zhang/ Supervisor Date of issue 2020-12-17 Report template No Template_FCC MPE-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 20B0794R-RF-US-P20V01 Page 2 / 8 INDEX page Competences and Guarantees ................................................................................................................................... 3 General conditions ...................................................................................................................................................... 3 Environmental conditions............................................................................................................................................ 3 Possible test case verdicts ......................................................................................................................................... 4 Abbreviations .............................................................................................................................................................. 4 Document History ....................................................................................................................................................... 5 Remarks and Comments ............................................................................................................................................ 5 1. RF Exposure Evaluation .................................................................................................................................... 6 1.1. Limits ................................................................................................................................................................. 6 1.2. Test Procedure .................................................................................................................................................. 8 1.3. Test Result of RF Exposure Evaluation ............................................................................................................ 8 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 20B0794R-RF-US-P20V01 Page 3 / 8 COMPETENCES AND GUARANTEES DEKRA is a testing laboratory competent to carry out the tests described in this report. In order to assure the traceability to other national and international laboratories, DEKRA has a calibration and maintenance program for its measurement equipment. DEKRA guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated in the report and it is based on the knowledge and technical facilities available at DEKRA at the time of performance of the test. DEKRA is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA. GENERAL CONDITIONS Test Location No. 99, Hongye Road, Suzhou Industrial Park Suzhou, 215006, P.R. China Date(receive sample) Nov. 23, 2020 Date (start test) Nov. 23, 2020 Date (finish test) Dec. 16, 2020 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or Competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA. ENVIRONMENTAL CONDITIONS The climatic conditions during the tests are within the limits specified by the manufacturer for the operation of the EUT and the test equipment. The climatic conditions during the tests were within the following limits: Ambient temperature 15 °C – 35 °C Relative Humidity air 30% - 60% If explicitly required in the basic standard or applied product / product family standard the climatic values are recorded and documented separately in this test report. DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 20B0794R-RF-US-P20V01 Page 4 / 8 POSSIBLE TEST CASE VERDICTS Test case does not apply to test object N/A Test object does meet requirement P (Pass) / PASS Test object does not meet requirement F (Fail) / FAIL Not measured N/M ABBREVIATIONS For the purposes of the present document, the following abbreviations apply: EUT : Equipment Under Test QP : Quasi-Peak CAV : CISPR Average AV : Average CDN : Coupling Decoupling Network SAC …

Text truncated - open the document above for the full version.

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 20B0794R-RF-US-P06V01 TEST REPORT FCC Rules&Requlations 47 CFR Chapter I - Part 15C Product Name Smart Key Trademark , Model and /or type reference AB30 FCC ID 2AYARAB30 Applicant’s name / address Kostal (Shanghai) Management Co., Ltd. Room 201-202 3# Building, 77 Yuan Gao Road, Jiading District Shanghai China Test method requested, standard FCC CFR Title 47 Part 15 Subpart C Verdict Summary IN COMPLIANCE Documented by (name / position & signature) Kitty Li/Project Assistant Reviewed by (name / position & signature) Frank He/ Technical Supervisor Approved by (name / position & signature) Jack Zhang/ Supervisor Date of issue 2020-12-29 Report template No Template_FCC Part 15C-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 20B0794R-RF-US-P06V01 Page 2 / 32 INDEX page Competences and Guarantees ................................................................................................................................... 4 General conditions ...................................................................................................................................................... 4 Environmental conditions............................................................................................................................................ 4 Possible test case verdicts ......................................................................................................................................... 5 Abbreviations .............................................................................................................................................................. 5 Document History ....................................................................................................................................................... 6 Remarks and Comments ............................................................................................................................................ 6 Used Equipment ......................................................................................................................................................... 7 Uncertainty .................................................................................................................................................................. 9 1 General Information ......................................................................................................................................... 10 1.1 General Description of the Item(s) ........................................................................................................ 10 1.2 Antenna Information .............................................................................................................................. 11 2 Description of Test Setup ................................................................................................................................ 12 2.1 Operating mode(s) used for tests.......................................................................................................... 12 2.2 Support / Auxiliary equipment / unit / Test software for the EUT .......................................................... 12 2.3 Test Configuration / Block diagram used for tests ................................................................................ 13 2.4 Testing process ..................................................................................................................................... 14 3 Verdict summary section ................................................................................................................................. 15 3.1 Standards .............................................................................................................................................. 15 3.2 Overview of results ................................................................................................................................ 15 3.3 Test Facility ........................................................................................................................................... 16 4 Test Results ..................................................................................................................................................... 17 4.1 AC Power Line Conducted Emission .................................................................................................... 17 4.1.1 Limit ............................................................................................................................................. 17 4.1.2 Test Setup ................................................................................................................................... 17 4.1.3 Test Procedure ........................................................................................................................... 17 4.1.4 Test Data..................................................................................................................................... 18 4.2 Radiated Emissions .............................................................................................................................. 19 4.2.1 Limit ............................................................................................................................................. 19 4.2.2 Test Setup ................................................................................................................................... 20 4.2.3 Test Procedure ........................................................................................................................... 21 4.2.4…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 20B0794R-RF-FCC-Setup Photo Page 1 / 1 Setup Photographs Description: Radiated emission(Below 1G) Description: Radiated emission(Above 1G) 9.