2AYBD-W1016Laptop

Shenzhen Honlin Technology Co.,Ltd 2026.9.04 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for 2AYBD-W1016 [Shenzhen Honlin Technology Co.,Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, (Applicant signature) (Applicant printed name) ： Lala Fan Shenzhen Honlin Technology Co.,Ltd 2026.9.04 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for2AYBD-W1016 [Shenzhen Honlin Technology Co.,Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) ： Lala Fan

Shenzhen Honlin Technology Co., Ltd Family models declaration letter. Date: September 18, 2026 We Shenzhen Honlin Technology Co., Ltd Of 401 & 4th Floor, Building 6, Phase II, Donghua Intelligent Manufacturing Park,Sanwei Community, Hangdheng Subdistrict, Bao'an District, Shenzhen,China Product: Laptop Model Name: W1016 Serial Model: A1016,W1095,A1095,W1401,A1401,W1501,W1601,W1703 Difference description of series models: All models have the same electrical design (i.e. circuit design, PCB layout, RF module/circuit, antenna type and position, components on PCB, etc.), mechanical structure and design are the same, only the model name and color are different Thanks Sincerely Signature Name: Lala Fan Date: Sep.18, 2026 Title: manager

Shenzhen Honlin Technology Co., Ltd 2026.9.04 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Laptop / W1016, A1016,W1095,A1095,W1401,A1401,W1501,W1601,W1703/FCC ID: 2AYBD- W1016 ) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (SCH，Block Diagram，Operational Description) required to be submitted with this application be permanently withheld from public review. the above documents are company proprietary information that could never get into the possession of your competition. Please contact me if there is any information you may need. Sincerely, Applicant’s Name: Lala Fan Title: Manager Signature:

Shenzhen Honlin Technology Co.,Ltd 2026.9.04 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen ETR Standard Technology Co., Ltd. Smith Chen to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Applicant’s Name: Lala Fan Title: Manager Signature:

Shenzhen Honlin Technology Co., Ltd 2026.9.04 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Short Term Confidentiality Request For(Laptop / W1016, A1016,W1095,A1095,W1401,A1401,W1501,W1601,W1703 /FCC ID: 2AYBD- W1016) To Whom It May Concern: In accordance with sections 0.457 and 0.459 of CFR 47, < Shenzhen Honlin Technology Co., Ltd >. requests short-term Confidentiality of following sections of this application for a period of 180 days after grant is issued. Test setup photos External photos Internal photos User’s manual These documents contain detailed system and equipment descriptions and related information about the product, which < Shenzhen Honlin Technology Co., Ltd > considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, < Shenzhen Honlin Technology Co., Ltd > feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Applicant’s Name: Lala Fan Title: Manager Signature:

Label and label location

According to KDB 447498 D01 General RF Exposure Guidance v06 2.1093. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune mm)] *[√f(GHz)] ≤ 3.0 for 1- RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Here, For BLE Frequency (MHz) Max power (dBm) 2440 3.86 For 2.4G WIFI Frequency (MHz) Max power (dBm) 2412 9.24 For 5.2G WIFI Frequency (MHz) Max power (dBm) 5200 7.58 For 5.8G WIFI Frequency (MHz) Max power (dBm) 5745 7.32 Operate simultaneously BLE: (2.43mW /5mm)*[√2.4 2.4GWIFI: (8.39mW /5mm)*[ 5.2GWIFI: (5.73mW /5mm)*[ 5.8GWIFI: (5.40mW /5mm)*[ If BLE+ 2.4G WIFIoperate simultaneously If BLE + 5.2G WIFI operate simultaneously If BLE+ 5.8G WIFI operate simultaneously So SAR test is not required FCC ID: 2AYBD-W1016 RF Exposure evaluation 447498 D01 General RF Exposure Guidance v06and 47CRF g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, -g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison power Maxpower (mW) Min.distance (mm) Calculation 2.43 5 0. Max power Maxpower (mW) Min.distance (mm) Calculation 8.39 5 2. Max power Maxpower (mW) Min.distance (mm) Calculation 5.73 5 2. Max power Maxpower (mW) Min.distance (mm) Calculation 5.40 5 2. 2.440(GHz)/7.5]=0.158 w/kg mW /5mm)*[√2.412(GHz)/7.5]=0.540w/kg mW /5mm)*[√5.200(GHz)/7.5]=0.795 w/kg mW /5mm)*[√5.745(GHz)/7.5]=0.827 w/kg operate simultaneously,then 0.158+0.540=0.698<1.6w/kg operate simultaneously, then0.158+0.795=0.953<1.6w/kg operate simultaneously, then0.158+0.827=0.985<1.6w/kg So SAR test is not required 47CRF part g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation up tolerance, mW)/(min. test separation distance, g extremity SAR, where f(GHz) is the Power and distance are rounded to the nearest mW and mm before calculation Calculation Value Threshold Value 0.76 3.0 Calculation Value Threshold Value 2.61 3.0 Calculation Value Threshold Value 2.61 3.0 Calculation Value Threshold Value 2.59 3.0 w/kg

Content 1.Company name 2.Antenna debugging requirements X19 Antenna Test Report 2.Antenna debugging requirements 3. Antenna Dimension Drawing 4.Passive efficiency of the main antenna 5.OTA test data 6.Antenna radiation pattern 2.Antenna debugging requirements Technical drafting WiFi Frequency band radio frequency Frequency band requirements WIFI-2.4G/WIFI-5.8G Number of communication antennas 2WIFI 3. Antenna Dimension Drawing 15mm 18mm 21mm 4.Passive efficiency of the main antenna WIF Antenna 4.Passive efficiency of the main antenna BT Antenna 5.OTA test data Entry Name X19 Antenna Label Tester Test statusFree SpaceAntenna Status Test Frequency WIFI-B(2.4G)WIFI-B(5.8G) CH 171336149157 TRP 5.66.36.8 TRP 5.66.36.8 TIS During OTA testing, the cable was disconnected and complete data could not be measured. The overall test result showed that the signal of the device was one grid weaker than that of the mobilephone, andthefull gridsignal was20 metersaway fromtherouter. 6.Antenna Radiation Pattern 6.Antenna Radiation Pattern 6.Antenna Radiation Pattern

Report No.: ET-26073656E03 This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen ETR Standard Technology Co., Ltd. TEST REPORT Applicant: Shenzhen Honlin Technology Co., Ltd Address of Applicant: 401 & 4th Floor, Building 6, Phase II, Donghua Intelligent Manufacturing Park,Sanwei Community, Hangdheng Subdistrict, Bao'an District, Shenzhen,China Manufacturer: Shenzhen Honlin Technology Co., Ltd Address of Manufacturer: 401 & 4th Floor, Building 6, Phase II, Donghua Intelligent Manufacturing Park,Sanwei Community, Hangdheng Subdistrict, Bao'an District, Shenzhen,China Product Name: Laptop Model No.: W1016, A1016,W1095,A1095,W1401,A1401,W1501,W1601,W1703 Trade Mark: N/A FCC ID: 2AYBD-W1016 Applicable standards: CFR Title 47 Part 15.407 Date of Test: Jul.25, 2026- Aug.12, 2026 Date of report issued: Sep.04, 2026 Remark: The results shown in this test report refer only to the sample(s) tested , this test report cannot be reproduced, except in full without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver Prepared By Shenzhen ETR Standard Technology Co., Ltd. Address: No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Compiled by: Reviewed by: Approved by: Project Engineer Project Manager Authorized Signature - Page 2 of 87 Report No.: ET-26073656E03 Tel:(86-0755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Report Revision History Report No. Description Issue Date ET-26073656E03 Original Sep.04, 2026 - Page 3 of 87 Report No.: ET-26073656E03 Tel:(86-0755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Contents Page 1 TEST SUMMARY ......................................................................................................................................4 1.1 MEASUREMENT UNCERTAINTY .............................................................................................................4 2 GENERAL INFORMATION .......................................................................................................................5 2.1 GENERAL DESCRIPTION OF EUT ..........................................................................................................5 2.2 TEST MODE .........................................................................................................................................7 2.3 DESCRIPTION OF SUPPORT UNITS ........................................................................................................8 2.4 TEST FACILITY ....................................................................................................................................8 2.5 ADDITIONAL INSTRUCTIONS ..................................................................................................................8 3 TEST INSTRUMENTS LIST ......................................................................................................................9 4 TEST RESULTS AND MEASUREMENT DATA .....................................................................................10 4.1 ANTENNA REQUIREMENT ....................................................................................................................10 4.2 CONDUCTED EMISSIONS ....................................................................................................................11 4.3 DUTY CYCLE ......................................................................................................................................14 4.4 CONDUCTED OUTPUT POWER ............................................................................................................18 4.5 OCCUPY BANDWIDTH ........................................................................................................................20 4.6 POWER SPECTRAL DENSITY ..............................................................................................................36 4.7 BAND EDGE .......................................................................................................................................53 4.7.1 Conducted test Method ...............................................................................................................53 4.7.2 Radiated test Method ..................................................................................................................66 4.8 SPURIOUS EMISSION .........................................................................................................................77 4.8.1 Radiated Emission Method .........................................................................................................77 5 TEST SETUP PHOTO .............................................................................................................................87 6 EUT CONSTRUCTIONAL DETAILS .......................................................................................................87 - Page 4 of 87 Report No.: ET-26073656E03 Tel:(86-0755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 1 Test Summary Test Item Section in CFR 47 Result Test by Antenna requirement 47CFR part 15.203 Pass / AC Power Line Conducted Emission 47CFR part 15.207 Pass Jason Huang Conducted Output Power 47CFR part 15.407 (a)(1)/(a)(3) Pass Oliver Wang 26dB Bandwidth 47CFR part 15.407 (a)(12) Pass Oliver Wang 6dB Bandwidth 47CFR part 15.407 (e) Pass Oliver Wang Power Spectral Density 47CFR part 15.407(a)(1)/(a)(3) Pass Oliver Wang …

Text truncated - open the document above for the full version.