2AYBDHL-1068Laptops

No幅： Laptops U蝇m响anual pl回曾同时ti回manualbefore using the n耐:ebook. START-UP GUIDE Imp。由nt回旬，vlnatruc目。m 布isde词。emust be used in an environment where the ambient幅mperatura Is behl嗣n5"C (41"F) and 35 ＂ 仰的 ． Do not expose the devi四”rainor humidity and k回pit away from liquids. If wa饱『oro甘、erllquld Is spilled on伽eunlt,田NllchO胃theun眈Immediatelyand wait until it is oomplelely dry before阳ming批backon. Do not倒阴阳thedevt田bsolar阳dlatlon. Do not u回strong四lvents.liquid de阳电entsoro甘冒町chem阳lsono『n回『 the sur徊。eof the device to prevant。。厅。sl。nor de阳”。raUonof the sur徊。e. Do not expose the devi睛”dustyenvironments. D。notu曲曲ad刷l国duringa gas leak Do not exp四athe device to strong magnetic or el目如ical币aids. You面npass the devt国throughairport X咽ydetectors. Ho嗣回忆ItIs 『F Command创thatyou d。notpa田yourdevi四throughthe magnetic 归国c­ 田。npor饱Isor expo四It to portable 甸甸ctors. Donotpla。eany objects on伽ede回国． D。nolpla四thedevl悟。n an u晒回nor unstable刷刷四 Ensure世1斟酌edevi回ispro幅c国d骨。mfalls oro伽町shocks协atmayda· mega It. Do not leave the device on or in cha咆aon your阳、eesor any ott回rpart of your body to avoid the r1sk of heat-related lnJurt国 Tum 。何甘、e unit before t用nap。而ngor covering it with materials that d。not 副lowfor。pUmumair drculaUon. Do not u回damagedpower cords，曲曲曲。riesor other peripherals with your device. We recommend the exclusive u嗣ofthe础剧目阳s(po-r supply, 面bles.. ) supplled with the devl西． Use only original bat恼ries.Replacing甜、ebattery with an inoo町’创b甜饱ry can lead to an axploelon r1s比 Do not dis嗣回mble,m。difyor repair the d脚iceyou帽elf,othe阳i锦伽egua­ ran wlll be voided Pie臼·跑回yourimpo幽ntoon国ntregularly to avoid da恒l锦＆ Our company disclaims all responsibility for any loss or suppre酬。nof elements c。n恼inedin the device due to improper use。f世，ehardwa帽。r soflv幅阻lackof maintenance or any other acciclen恒Ievant. ·�甜冒.A CAUTION: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK) OF THE UNIT. REFER SERVICING ONLY TO QUALIFIED SERVICE PERSONNEL. A A & The lightning啊幽hs归，b。lw性han arrow in an equi恼怡剧创angleis intend回toal回theuser to the p阴阳回ofan uninsula国《dange­ rous voltsge》insidethe product, which is of sufficient magnitude to oonstitu协a由k。fel目;tricshock In the d口四men恒目。n supplied with the d酣睡，the e回amationpoint In an aqulla饱rallrlangle Is Intended to alert the us町阳thepra回nee of Important ope帽由ngand main饱nan曲lns1ructlons. At full volume, prolonged lls饱nlngm伽·阴阳bleaudio devl帽臼n damage the u国内hearing. Legal Dlaclalmer and c。”yrlghtNotice 胃、is p『飞）ducthas bee n manufa饰」咱dand sold under廿，aresponsibility of Group SFIT Anyo由自pre拥duct,service, company, trade or product name and logo陪他阻n四d he帽ina帽nei伽erend。而adnor sponsored by Technicolor (S.A.) or i悔aIlia饱s. In恼I,lintel Atom and the Intel Inside logo are国demarksof Intel CorporaUon In 世田 U.S.and/or other countries. Allo伽ertrademarks and logos a咱pro阴rtyof their respective owne陪unless Indicated。lherwlse. @CEJ!－�§F@ Pack量”contents 1 x ultrabook 1xcha明er 1 x document set 己画�G FCC Caution： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC Software Configuration Control Declaration Rev1.1 Shenzhen Honlin Technology Co.,Ltd FCC Software Configuration Control Declaration Date: 2021/01/27 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: Regarding FCC Country Code Selection guidelines identified in KDB 594280 D01 Software Configuration Control v02r01. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Lala Fan Date: 2021/01/27 Title: Manager Signatureof applicant

Shenzhen Honlin Technology Co., Ltd Agent Authorization Company: Shenzhen Honlin Technology Co., Ltd Address: Floor4.Bldg.B, Bldg A.B.Shijie Sanwei Industrial Area, Gushu Community, Xixiang, Baoan, Shenzhen, China Product Name: Laptops Model Number(s): HL-1068, HL-1011, HL1012, HL1016, HL1018, HL1019, HL1068, HL1168, HL1252, HL1488, HL1568, HL1388, HL1162, HL-K701 Trademark: HBESTORE FCC ID: 2AYBDHL-1068 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2021/01/27 Name: Lala Fan Title: Manager Company: Shenzhen Honlin Technology Co., Ltd

Shenzhen Honlin Technology Co.,Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021/01/27 Subject; Request for Confidentiality FCC ID: 2AYBDHL-1068 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Lala Fan Title: Manager

Shenzhen Honlin Technology Co., Ltd Model Difference Product Name: Laptops Model Number(s): HL-1068, HL-1011, HL1012, HL1016, HL1018, HL1019, HL1068, HL1168, HL1252, HL1488, HL1568, HL1388, HL1162, HL-K701 Trademark: HBESTORE FCC ID: 2AYBDHL-1068 All the model are the same circuit and RF module, except model names. Regards Sincerely Client’s signature: Client’s name / title : Lala Fan / Manager Contact information / address: Floor4.Bldg.B, Bldg A.B.Shijie Sanwei Industrial Area, Gushu Community, Xixiang, Baoan, Shenzhen, China

External Photos

Size:50*20mm FCC ID: 2AYBDHL-1068 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interfer ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. Label Location

Internal Photos WIFI Antenna WIFI/BT Antenna

Shenzhen BCTC Testing Co., Ltd. FCC ID: 2AYBDHL-1068 Portable device According to §47 C.F.R. and §2.1093, systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB447498 D01 General RF Exposure Guidance V06 The 1-g SAR and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)]·[√f(GHz)/x] W/kg, for test separation distances ≤ 50 mm, Where x = 7.5 for 1-g SAR and x = 18.75 for 10-g SAR • f(GHZ) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison When the minimum test separation distance is < 5 mm, a distance of 5 mm and x = 7.5 for 1-g SAR is applied to determine SAR test exclusion. BT-EDR Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion GFSK2.480 0.93 1.240±10.001.00<50.041990.40YES Pi/4 DQPSK 2.441 1.286 1.341±12.001.58<50.066030.40YES 8DPSK2.441 1.229 1.331±12.001.58<50.066030.40YES 2.4G-WIFI Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion 2.4376.594.566±17.005.01<50.208640.40YES 802.11n20 5G-WIFI Modulation Channel Freq. (GHz) Conducte d power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distanc e (mm) Result calculation SAR Exclusion threshold SAR test exclusion 5.1806.934.936±17.005.01<50.304180.40YES 802.11n20 5.8G-WIFI Modulation Channel Freq. (GHz) Conducte d power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion 5.7456.704.686±17.005.01<50.320340.40YES 802.11n20 Shenzhen BCTC Testing Co., Ltd. For the Max simultaneous transmission Conclusion: For the max result : 0.38637＜0.4, the SAR testing is not required. Evaluation mode Result calculation Total Result calculation SAR Exclusion threshold Result 2.4G-WIFI 0.20864 0.27467 0.4 Pass BT 0.06603 Evaluation mode Result calculation Total Result calculation SAR Exclusion threshold Result 5G-WIFI 0.30418 0.37021 0.4 Pass BT 0.06603 Evaluation mode Result calculation Total Result calculation SAR Exclusion threshold Result 5.8G-WIFI 0.32034 0.38637 0.4 Pass BT 0.06603

No.：BCTC/RF-EMC-005 Page: 1 of 100 Edition：A.3 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2010001689-3E Applicant: Shenzhen Honlin Technology Co., Ltd Product Name: Laptops Model/Type Ref.: HL-1068 Tested Date: 2020-11-02 to 2021-01-15 Issued Date: 2021-01-18 Report No.: BCTC2010001689-3E No.：BCTC/RF-EMC-005 Page: 2 of 100 Edition：A.3 FCC ID: 2AYBDHL-1068 The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: Laptops Trademark: HBESTORE Model/Type Ref.: HL-1068 HL-1011, HL1012, HL1016, HL1018, HL1019, HL1068, HL1168, HL1252, HL1488, HL1568, HL1388, HL1162, HL-K701 Prepared For: Shenzhen Honlin Technology Co., Ltd Address: Floor4.Bldg.B, Bldg A.B.Shijie Sanwei Industrial Area, Gushu Community, Xixiang, Baoan, Shenzhen, China Manufacturer: Shenzhen Honlin Technology Co., Ltd Address: Floor4.Bldg.B, Bldg A.B.Shijie Sanwei Industrial Area, Gushu Community, Xixiang, Baoan, Shenzhen, China Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2020-11-02 Sample tested Date: 2020-11-02 to 2021-01-15 Issue Date: 2021-01-18 Report No.: BCTC2010001689-3E Test Standards FCC Part15 15.407 ANSI C63.10-2013 KDB 662911 D01 v02r01 KDB 789033 D02 v02r01 Test Results PASS Tested by: Approved by: Eric Yang/Project Handler Zero Zhou/Reviewer Report No.: BCTC2010001689-3E No.：BCTC/RF-EMC-005 Page: 3 of 100 Edition：A.3 TABLE OF CONTENT Test Report Declaration Page 1. VERSION ............................................................. 5 2. TEST SUMMARY ...................................................... 6 3. MEASUREMENT UNCERTAINTY ........................................ 7 4. PRODUCT INFORMATION AND TEST SETUP ............................ 8 4.1 Product Information ..................................................... 8 4.2 Test Setup Configuration ................................................ 9 4.3 Support Equipment ..................................................... 9 4.4 Channel List ........................................................... 9 4.5 Test Mode ............................................................ 11 4.6 Antenna .............................................................. 11 5. TEST FACILITY AND TEST INSTRUMENT USED ........................ 12 5.1 Test Facility ........................................................... 12 5.2 Test Instrument Used .................................................. 12 6. CONDUCTED EMISSIONS ............................................. 14 6.1 Block Diagram Of Test Setup ............................................ 14 6.2 Limit ................................................................. 14 6.3 Test procedure ........................................................ 14 6.4 EUT operating Conditions ............................................... 14 6.5 Test Result ........................................................... 15 7. RADIATED EMISSIONS ............................................... 17 7.1 Block Diagram Of Test Setup ............................................ 17 7.2 Limit ................................................................. 18 7.3 Test procedure ........................................................ 19 7.4 EUT operating Conditions ............................................... 20 7.5 Test Result ........................................................... 21 8. POWER SPECTRAL DENSITY TEST ................................... 34 8.1 Block Diagram Of Test Setup ............................................ 34 8.2 Limit ................................................................. 34 8.3 Test procedure ........................................................ 35 8.4 EUT operating Conditions ............................................... 35 8.5 Test Result ........................................................... 36 9. 26DB & 6DB & 99% EMISSION BANDWIDTH ............................ 44 9.1 Block Diagram Of Test Setup ............................................ 44 9.2 Limit ................................................................. 44 9.3 Test procedure ........................................................ 44 9.4 EUT operating Conditions ............................................... 45 9.5 Test Result ........................................................... 45 10. MAXIMUM CONDUCTED OUTPUT POWER ............................. 63 10.1 Block Diagram Of Test Setup .......................................... 63 Report No.: BCTC2010001689-3E No.：BCTC/RF-EMC-005 Page: 4 of 100 Edition：A.3 10.2 Limit ................................................................ 63 10.3 Test procedure ....................................................... 63 10.4 EUT operating Conditions ............................................. 64 10.5 Test Result .......................................................... 65 11. OUT OF BAND EMISSIONS ............................................ 67 11.1 Block Diagram Of Test Setup .......................................... 67 11.2 Limit ................................................................ 67 11.3 Test procedure ....................................................... 67 11.4 EUT operating Conditions ............................................. 67 11.5 Test Result .......................................................... 68 12. SPURIOUS RF CONDUCTED EMISSIONS ............................... 74 12.1 Block Diagram Of Test Setup .......................................... 74 12.2 Limit ................................................................ 74 12.3 Test procedure ..........................................…

Text truncated - open the document above for the full version.

Report No.: BCTC2010001689-3E No.：BCTC/RF-EMC-005 Page: 51 of 100 Edition：A.3 Mode Channel Frequency (MHz) 99% bandwidth (MHz) 6dB bandwidth (MHz) Limit MHz Result ANT B ANT B 802.11 n20 CH149 5745 17.790 17.01 ≥500 Pass CH157 5785 17.762 16.94 ≥500 Pass CH165 5825 17.721 17.59 ≥500 Pass 802.11 n40 CH151 5755 37.073 35.62 ≥500 Pass CH159 5795 36.860 35.98 ≥500 Pass 802.11 ac20 CH149 5745 17.729 17.07 ≥500 Pass CH157 5785 17.751 17.28 ≥500 Pass CH165 5825 17.758 17.27 ≥500 Pass 802.11 ac40 CH151 5755 36.951 35.73 ≥500 Pass CH159 5795 36.966 36.10 ≥500 Pass 802.11 AC80 CH155 5775 75.595 75.28 ≥500 Pass Report No.: BCTC2010001689-3E No.：BCTC/RF-EMC-005 Page: 52 of 100 Edition：A.3 Antenna A: 5725-5850MHz Mode: 802.11n-HT20 5745MHz 6dB bandwidth 5745MHz 99% bandwidth Report No.: BCTC2010001689-3E No.：BCTC/RF-EMC-005 Page: 53 of 100 Edition：A.3 5785MHz 6dB bandwidth 5785MHz 99% bandwidth 5825MHz 6dB bandwidth Report No.: BCTC2010001689-3E No.：BCTC/RF-EMC-005 Page: 54 of 100 Edition：A.3 5825MHz 99% bandwidth Report No.: BCTC2010001689-3E No.：BCTC/RF-EMC-005 Page: 55 of 100 Edition：A.3 Mode: 802.11n-HT40 5755 MHz 6dB bandwidth 5755 MHz 99% bandwidth Report No.: BCTC2010001689-3E No.：BCTC/RF-EMC-005 Page: 56 of 100 Edition：A.3 5795 MHz 6dB bandwidth 5795 MHz 99% bandwidth Report No.: BCTC2010001689-3E No.：BCTC/RF-EMC-005 Page: 57 of 100 Edition：A.3 Mode: 802.11ac-HT20 5745MHz 6dB bandwidth 5745MHz 99% bandwidth Report No.: BCTC2010001689-3E No.：BCTC/RF-EMC-005 Page: 58 of 100 Edition：A.3 5785MHz 6dB bandwidth 5785MHz 99% bandwidth 5825MHz 6dB bandwidth Report No.: BCTC2010001689-3E No.：BCTC/RF-EMC-005 Page: 59 of 100 Edition：A.3 5825MHz 99% bandwidth Report No.: BCTC2010001689-3E No.：BCTC/RF-EMC-005 Page: 60 of 100 Edition：A.3 Mode: 802.11ac-HT40 5755 MHz 6dB bandwidth 5755 MHz 99% bandwidth Report No.: BCTC2010001689-3E No.：BCTC/RF-EMC-005 Page: 61 of 100 Edition：A.3 5795 MHz 6dB bandwidth 5795 MHz 99% bandwidth Report No.: BCTC2010001689-3E No.：BCTC/RF-EMC-005 Page: 62 of 100 Edition：A.3 Mode: 802.11ac-HT80 5775 MHz 6dB bandwidth 5775 MHz 99% bandwidth Report No.: BCTC2010001689-3E No.：BCTC/RF-EMC-005 Page: 63 of 100 Edition：A.3 10. MAXIMUM CONDUCTED OUTPUT POWER 10.1 Block Diagram Of Test Setup 10.2 Limit According to FCC §15.407 The maximum conduced output power should not exceed: Frequenc y Band(MHz) Limit 5150~5250 0.25W 5725~5850 1W 10.3 Test procedure Maximum conducted output power may be measured using a spectrum analyzer/EMI receiver or an RF power meter. 1. Device Configuration If possible, configure or modify the operation of the EUT so that it transmits continuously at its maximum power control level (see section II.B.). a) The intent is to test at 100 percent duty cycle; however a small reduction in duty cycle (to no lower than 98 percent) is permitted if required by the EUT for amplitude control purposes. Manufacturers are expected to provide software to the test lab to permit such continuous operation. b) If continuous transmission (or at least 98 percent duty cycle) cannot be achieved due to hardware limitations (e.g., overheating), the EUT shall be operated at its maximum power control level with the transmit duration as long as possible and the duty cycle as high as possible. 2. Measurement using a Spectrum Analyzer or EMI Receiver (SA) Measurement of maximum conducted output power using a spectrum analyzer requires integrating the spectrum across a frequency span that encompasses, at a minimum, either the EBW or the 99-percent occupied bandwidth of the signal.1 However, the EBW must be used to determine bandwidth dependent limits on maximum conducted output power in accordance with § 15.407(a). a) The test method shall be selected as follows: (i) Method SA-1 or SA-1 Alternative (averaging with the EUT transmitting at full power throughout each sweep) shall be applied if either of the following conditions can be satisfied: • The EUT transmits continuously (or with a duty cycle ≥ 98 percent). Report No.: BCTC2010001689-3E No.：BCTC/RF-EMC-005 Page: 64 of 100 Edition：A.3 • Sweep triggering or gating can be implemented in a way that the device transmits at the maximum power control level throughout the duration of each of the instrument sweeps to be averaged. This condition can generally be achieved by triggering the instrument’s sweep if the duration of the sweep (with the analyzer configured as in Method SA-1, below) is equal to or shorter than the duration T of each transmission from the EUT and if those transmissions exhibit full power throughout their durations. (ii) Method SA-2 or SA-2 Alternative (averaging across on and off times of the EUT transmissions, followed by duty cycle correction) shall be applied if the conditions of (i) cannot be achieved and the transmissions exhibit a constant duty cycle during the measurement duration. Duty cycle will be considered to be constant if variations are less than ± 2 percent. (iii) Method SA-3 (RMS detection with max hold) or SA-3 Alternative (reduced VBW with max hold) shall be applied if the conditions of (i) and (ii) cannot be achieved. b) Method SA-1 (trace averaging with the EUT transmitting at full power throughout each sweep): (i) Set span to encompass the entire emission bandwidth (EBW) (or, alternatively, the entire 99% occupied bandwidth) of the signal. (ii) Set RBW = 1 MHz. (iii) Set VBW ≥ 3 MHz. (iv) Number of points in sweep ≥ 2 Span / RBW. (This ensures that bin-to-bin spacing is ≤ RBW/2, so that narrowband signals are not lost between frequency bins.) (v) Sweep time = auto. (vi) Detector = RMS (i.e., power averaging), if available. Otherwise, use sample detector mode. (vii) If transmit duty cycle < 98 percent, use a video trigger with the trigger level set to enable triggering only on full power pulses. Transmitter must operate at maximum power control level for the entire duration of every sweep. If the EUT transmits continuously (i.e., with no off intervals) or at duty cycle ≥ 98 percent, and if each transmission is…

Text truncated - open the document above for the full version.

Report No.: BCTC2010001689-3E No.：BCTC/RF-EMC-005 Page: 31 of 100 Edition：A.3 Test Mode ： TX (5.8G) --802.11ac-HT20 Polar (H/V) Frequency Meter Reading Cable loss Antenn a Factor Preamp Factor Emission Level Limits Margin Detector Type (MHz) (dBuV) (dB) dB/m (dB) (dBuV/m) (dBuV/m) (dB) Low Channel (5745 MHz)-Above 1G V 4679.197 62.89 5.94 35.40 44.00 60.23 74.00 -13.77 PK V 4679.197 43.89 5.94 35.40 44.00 41.23 54.00 -12.77 AV V 11490.171 62.45 8.46 39.75 44.50 66.16 68.20 -2.04 PK V 11490.171 43.78 8.46 39.75 44.50 47.49 54.00 -6.51 AV V 17235.157 63.07 10.12 38.80 44.10 67.89 74.00 -6.11 PK V 17235.157 43.56 10.12 38.80 42.70 49.78 54.00 -4.22 AV H 4679.038 61.53 5.94 35.18 44.00 58.65 74.00 -15.35 PK H 4679.038 43.52 5.94 35.18 44.00 40.64 54.00 -13.36 AV H 11490.151 54.88 8.46 38.71 44.50 57.55 68.20 -10.65 PK H 11490.151 41.21 8.46 38.71 44.50 43.88 54.00 -10.12 AV H 17235.121 51.88 10.12 38.38 44.10 56.28 74.00 -17.72 PK H 17235.121 40.34 10.12 38.38 44.10 44.74 54.00 -9.26 AV middle Channel (5785 MHz)-Above 1G V 4592.187 60.55 6.48 36.35 44.05 59.33 74.00 -14.67 PK V 4592.187 43.73 6.48 36.35 44.05 42.51 54.00 -11.49 AV V 11570.032 62.81 8.47 37.88 44.51 64.65 68.20 -3.55 PK V 11570.032 43.38 8.47 37.88 44.51 45.22 54.00 -8.78 AV V 17355.127 63.56 10.12 38.80 44.10 68.38 74.00 -5.62 PK V 17355.127 43.48 10.12 38.80 42.70 49.70 54.00 -4.30 AV H 4592.129 61.70 6.48 36.37 44.05 60.50 74.00 -13.50 PK H 4592.129 43.97 6.48 36.37 44.05 42.77 54.00 -11.23 AV H 11570.050 54.57 8.47 38.64 44.50 57.18 68.20 -11.02 PK H 11570.050 41.62 8.47 38.64 44.50 44.23 54.00 -9.77 AV H 17355.173 54.47 10.12 38.38 44.10 58.87 74.00 -15.13 PK H 17355.173 43.08 10.12 38.38 44.10 47.48 54.00 -6.52 AV High Channel (5825 MHz)-Above 1G V 6039.117 61.19 7.10 37.24 43.50 62.03 68.20 -6.17 PK V 6039.117 43.38 7.10 37.24 43.50 44.22 54.00 -9.78 AV V 11650.076 64.85 8.46 37.68 44.50 66.49 74.00 -7.51 PK V 11650.076 43.20 8.46 37.68 44.50 44.84 54.00 -9.16 AV V 17475.017 60.14 10.12 38.80 44.10 64.96 68.20 -3.24 PK V 17475.017 43.04 10.12 38.80 42.70 49.26 54.00 -4.74 AV H 6039.043 60.70 7.10 37.24 43.50 61.54 68.20 -6.66 PK H 6039.043 43.05 7.10 37.24 43.50 43.89 54.00 -10.11 AV H 11650.148 54.35 8.46 38.57 44.50 56.88 74.00 -17.12 PK H 11650.148 43.82 8.46 38.57 44.50 46.35 54.00 -7.65 AV H 17475.154 53.16 10.12 38.38 44.10 57.56 68.20 -10.64 PK H 17475.154 40.68 10.12 38.38 44.10 45.08 54.00 -8.92 AV Note: PK value is lower than the Average value limit, So average didn't record. The 26.5-40G amplitude of spurious emissions that are attenuated by more than 20dB below the permissible value has no need to be reported. Emission level (dBuV/m) = 20 log Emission level (uV/m). Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor = Level. Test Mode is MIMO Mode. Report No.: BCTC2010001689-3E No.：BCTC/RF-EMC-005 Page: 32 of 100 Edition：A.3 Test Mode ： TX (5.8G) -- 802.11ac-HT40 Polar (H/V) Frequency Meter Reading Cable loss Antenn a Factor Preamp Factor Emission Level Limits Margin Detector Type (MHz) (dBuV) (dB) dB/m (dB) (dBuV/m) (dBuV/m) (dB) Low Channel (5755 MHz)-Above 1G V 4679.046 63.40 5.94 35.40 44.00 60.74 74.00 -13.26 PK V 4679.046 43.38 5.94 35.40 44.00 40.72 54.00 -13.28 AV V 11510.155 61.02 8.46 39.75 44.50 64.73 68.20 -3.47 PK V 11510.155 43.94 8.46 39.75 44.50 47.65 54.00 -6.35 AV V 17265.166 64.39 10.12 38.80 44.10 69.21 74.00 -4.79 PK V 17265.166 43.92 10.12 38.80 42.70 50.14 54.00 -3.86 AV H 4679.138 62.21 5.94 35.18 44.00 59.33 74.00 -14.67 PK H 4679.138 43.16 5.94 35.18 44.00 40.28 54.00 -13.72 AV H 11510.066 52.01 8.46 38.71 44.50 54.68 68.20 -13.52 PK H 11510.066 43.62 8.46 38.71 44.50 46.29 54.00 -7.71 AV H 17265.194 52.87 10.12 38.38 44.10 57.27 74.00 -16.73 PK H 17265.194 44.39 10.12 38.38 44.10 48.79 54.00 -5.21 AV middle Channel (5795 MHz)-Above 1G V 6039.021 62.76 6.48 36.35 44.05 61.54 68.20 -6.66 PK V 6039.021 43.74 6.48 36.35 44.05 42.52 54.00 -11.48 AV V 11590.156 61.00 8.47 37.88 44.51 62.84 74.00 -11.16 PK V 11590.156 43.93 8.47 37.88 44.51 45.77 54.00 -8.23 AV V 17385.173 60.12 10.12 38.80 44.10 64.94 68.20 -3.26 PK V 17385.173 43.12 10.12 38.80 42.70 49.34 54.00 -4.66 AV H 6039.196 63.67 6.48 36.37 44.05 62.47 68.20 -5.73 PK H 6039.196 43.70 6.48 36.37 44.05 42.50 54.00 -11.50 AV H 11590.015 50.19 8.47 38.64 44.50 52.80 74.00 -21.20 PK H 11590.015 41.97 8.47 38.64 44.50 44.58 54.00 -9.42 AV H 17385.158 54.49 10.12 38.38 44.10 58.89 68.20 -9.31 PK H 17385.158 40.61 10.12 38.38 44.10 45.01 54.00 -8.99 AV Note: PK value is lower than the Average value limit, So average didn't record. The 26.5-40G amplitude of spurious emissions that are attenuated by more than 20dB below the permissible value has no need to be reported. Emission level (dBuV/m) = 20 log Emission level (uV/m). Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor = Level. The Worst mode is Antenna A. Report No.: BCTC2010001689-3E No.：BCTC/RF-EMC-005 Page: 33 of 100 Edition：A.3 Test Mode ： TX(5.8G) - 802.11 AC80 Polar (H/V) Frequency Meter Reading Cable loss Antenn a Factor Preamp Factor Emission Level Limits Margin Detector Type (MHz) (dBuV) (dB) dB/m (dB) (dBuV/m) (dBuV/m) (dB) (5775 MHz)-Above 1G V 4679.107 63.84 5.94 35.40 44.00 61.18 74.00 -12.82 PK V 4679.107 43.15 5.94 35.40 44.00 40.49 54.00 -13.51 AV V 11550.113 61.27 8.46 39.75 44.50 64.98 68.20 -3.22 PK V 11550.113 43.80 8.46 39.75 44.50 47.51 54.00 -6.49 AV V 17325.110 64.52 10.12 38.80 44.10 69.34 74.00 -4.66 PK V 17325.110 43.76 10.12 38.80 42.70 49.98 54.00 -4.02 AV H 4679.128 63.42 5.94 35.18 44.00 60.54 74.00 -13.46 PK H 4679.128 43.96 5.94 35.18 44.00 41.08 54.00 -12.92 AV H 11550.051 54.73 8.46 38.71 44.50 57.40 68.20 -10.80 PK H 11550.051 44.92 8.46 38.71 44.50 47.59 54.00 -6.41 AV H 17325.195 54.02 10.12 38.38 44.10 58.42 74.00 -15.58 PK H 17325.195 44.38 10.12 38.38 44.10 48.78 54.00 -5.22 AV Note: PK value is lower than the Average value limit, So average didn't record. The 26.5-40G amplitude o…

Text truncated - open the document above for the full version.