2AYFQ-ST30Handheld Two way Radio

IMPORTANT:Changes or modifications to this unit not expressly approved by SFE ST30 two way radio.could void your right to operate this unit. Your radio is set up to transmit a regulated signal on an assigned frequency. It is against the law to alter or adjust the settings inside the COMMUNICATOR to exceed those limitations. Any adjustment to your radio must be made by qualified technicians. ANY IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED AS SET FORTH HEREIN AND TO THE DURATION OF THE LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MIDLAND BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE, GROSS NEGLIGENCE, BODILY INJURY, PROPERTY DAMAGE AND DEATH) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. LIMITED WARRANTY To obtain a license or ask questions about the license application, contact the FCC at 1-888-CALL FCC or go to the FCC's website: http://www.fcc.govand request form 605.

Quanzhou SFE Electronic Technology Co.,Ltd Agent Authorization Company: Quanzhou SFE Electronic Technology Co.,Ltd Address: No.35, Yangming Street, Shuangyang,Luojiang District,Quanzhou City,Fujian Province 362012,China Product Name: Handheld Two way Radio Model Number(s): ST30 Product Description: Handheld Two way Radio We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2021-01-06 Name: Leo Lee Company: Quanzhou SFE Electronic Technology Co.,Ltd

Quanzhou SFE Electronic Technology Co.,Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021-01-05 Subject; Request for Confidentiality FCC ID: 2AYFQ-ST30 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Leo Lee Quanzhou SFE Electronic Technology Co.,Ltd

External Photos WHOLE VIEW OF EUT TOP VIEW OF EUT BOTTOM VIEW OF EUT FRONT VIEW OF EUT BACK VIEW OF EUT LEFT VIEW OF EUT RIGHT VIEW OF EUT

FCC ID Label Location FCC ID: 2AYFQ-ST30

Internal Photos OPEN VIEW-1 OF EUT OPEN VIEW-2 OF EUT OPEN VIEW-3 OF EUT INTERNAL VIEW-1 OF EUT Antenna INTERNAL VIEW-2 OF EUT INTERNAL VIEW-3 OF EUT INTERNAL VIEW-4 OF EUT INTERNAL VIEW-5 OF EUT

Ref : ACR.262.3.20.MVGB.A SHENZHEN STS TEST SERVICES CO., LTD. 1/F, BUILDING 2, ZHUOKE SCIENCE PARK,No.190, CHONGQING ROAD, FUYONG STREET, BAO’ AN DISTRICT, SHENZHEN,GUANGDONGCHINA MVG COMOSAR REFERENCE DIPOLE FREQUENCY: 450 MHZ SERIAL NO.: SN 30/14 DIP0G450-330 07/14/2020 Summary: This document presents the method and results from an accredited SAR reference dipole calibration performed in MVG. using the CALIPROBE test bench. for use with a MVG COMOSAR system only. The test results covered by accreditation are traceable to the International System of Units(SI). SAR Reference Dipole Calibration Report Calibrated at MVG Z.I. de la pointe du diable Technopôle Brest Iroise - 295 avenue Alexis de Rochon 29280 PLOUZANE - FRANCE Calibretion date: 07/14/2020 Page: 1/11 SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.262.3.20.MVGB.A Name Function Date Signature Prepared by : Jérôme LUC Technical Manager 7/28/2020 Checked by : Jérôme LUC Technical Manager 7/28/2020 Approved by : Yann Toutain Laboratory Director 7/28/2020 Customer Name Distribution : Shenzhen STS Test Services Co., Ltd. Issue Date Modifications A 7/28/2020Initial release Page: 2/11 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vH This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. Name Jérôme LUC SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.262.3.20.MVGB.A TABLE OF CONTENTS 1 Introduction ................................................................................................................ 4 2 Device Under Test ..................................................................................................... 4 3 Product Description ................................................................................................... 4 3.1 General Information _______________________________________________________ 4 4 Measurement Method ................................................................................................ 5 4.1 Return Loss Requirements __________________________________________________ 5 4.2 Mechanical Requirements ___________________________________________________ 5 5 Measurement Uncertainty .......................................................................................... 5 5.1 Return Loss ______________________________________________________________ 5 5.2 Dimension Measurement ___________________________________________________ 5 5.3 Validation Measurement ____________________________________________________ 5 6 Calibration Measurement Results .............................................................................. 6 6.1 Return Loss and Impedance In Head Liquid ____________________________________ 6 6.2 Return Loss and Impedance In Body Liquid ____________________________________ 6 6.3 Mechanical Dimensions ____________________________________________________ 6 7 Validation measurement ............................................................................................ 7 7.1 Head Liquid Measurement __________________________________________________ 7 7.2 SAR Measurement Result With Head Liquid ____________________________________ 8 7.3 Body Liquid Measurement __________________________________________________ 9 7.4 SAR Measurement Result With Body Liquid __________________________________ 10 8 List of Equipment .................................................................................................... 11 Page: 2/11 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vH T his document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. Page: 3/11 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vH This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.262.3.20.MVGB.A 1 INTRODUCTION This document contains a summary of the requirements set forth by the IEEE 1528, OET 65 Bulletin C and CEI/IEC 62209 standards for reference dipoles used for SAR measurement system validations and the measurements that were performed to verify that the product complies with the fore mentioned standards. 2 DEVICE UNDER TEST Device Under Test Device Type COMOSAR 450 MHz REFERENCE DIPOLE Manufacturer MVG Model SID450 Serial Number SN 30/14 DIP0G450-330 Product Condition (new / used) New A yearly calibration interval is recommended. 3 PRODUCT DESCRIPTION 3.1 GENERAL INFORMATION MVG’s COMOSAR Validation Dipoles are built in accordance to the IEEE 1528, OET 65 Bulletin C and CEI/IEC 62209 standards. The product is designed for use with the COMOSAR test bench only. Figure 1 – MVG COMOSAR Validation Dipole Page: 4/11 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vH This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.262.3.20.MVGB.A 4 MEASUREMENT METHOD The IEEE 1528, OET 65 Bulletin C and CEI/IEC 62209 standards provide requirements for reference dipoles used for system validation measurements. The following measurements were performed to verify that the product complies with the fore mentioned standards. 4.1 RETURN LOSS REQUIREMENTS The dipole used for SAR system validation measurements and checks must have a return loss of -20 dB or better. Th…

Text truncated - open the document above for the full version.

Any reproduction of this document must be done in full. No single part of this document may be reproduced without permission from STS, All Test Data Presented in this report is only applicable to presented Test sample. ShenZhen STS Test Services Co.,Ltd. A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District, Bao’an District, Shenzhen, Guang Dong, China TEL: +86-755 3688 6288 FAX: +86-755 3688 6277 E-mail:[email protected] FCC SAR TEST REPORT Report No.: STS2011161H01 Issued for Quanzhou SFE Electronic Technology Co.,Ltd No.35, Yangming Street, Shuangyang, Luojiang District, Quanzhou City, Fujian Province 362012, China Product Name: Handheld Two way Radio Brand Name: N/A Model Name: ST30 Series Model: N/A FCC ID: 2AYFQ-ST30 Test Standard: ANSI/IEEE Std. C95.1 FCC 47 CFR Part 2 ( 2.1093) IEEE 1528: 2013 Max. Report SAR (1g): Face up : 0.582 W/kg Back side: 1.465 W/kg Max. Report SAR (10g): Front Side: 2.332 W/kg S T L A B S Page 2 of 35 Report No.: STS2011161H01 Test Report Certification Applicant’s name ................. : Quanzhou SFE Electronic Technology Co.,Ltd Address ................................. : No.35, Yangming Street, Shuangyang, Luojiang District, Quanzhou City, Fujian Province 362012, China Manufacture's Name ............ : Quanzhou SFE Electronic Technology Co.,Ltd Address ................................. : No.35, Yangming Street, Shuangyang, Luojiang District, Quanzhou City, Fujian Province 362012, China Product description Product name ........................ : Handheld Two way Radio Brand Name ........................... : N/A Model name ......................... : ST30 Series Model .......................... : N/A Standards ............................. : ANSI/IEEE Std. C95.1 IEEE 1528:2013 FCC 47 CFR Part 2 ( 2.1093) The device was tested by Shenzhen STS Test Services Co., Ltd. in accordance with the measurement methods and procedures specified in KDB 865664 The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Date of Test ........................................... : Date (s) of performance of tests ............. : 26 Nov. 2020 Date of Issue .......................................... : 27 Nov. 2020 Test Result .............................................. : Pass Testing Engineer : ( Lemon Li) Technical Manager : (Sean She) Authorized Signatory : (Vita Li) Page 3 of 35 Report No.: STS2011161H01 Table of Contents 1. General Information 5 1.1 EUT Description 5 1.2 Test Environment 6 1.3 Test Factory 6 2. Test Standards and Limits 7 3. SAR Measurement System 8 3.1 Definition of Specific Absorption Rate (SAR) 8 3.2 SAR System 8 4. Tissue Simulating Liquids 11 4.1 Simulating Liquids Parameter Check 11 5. SAR System Validation 13 5.1 Validation System 13 5.2 Validation Result 13 6. SAR Evaluation Procedures 14 7. EUT Test Position 15 8. Uncertainty 16 8.1 Measurement Uncertainty 16 8.2 System validation Uncertainty 17 9. Conducted Power Measurement 18 10. EUT And Test Setup Photo 19 10.1 EUT Photo 19 10.2 Setup Photo 23 11. SAR Result Summary 27 12. Equipment List 29 Appendix A. System Validation Plots 30 Appendix B. SAR Test Plots 32 Appendix C. Probe Calibration and Dipole Calibration Report 35 Page 4 of 35 Report No.: STS2011161H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 27 Nov. 2020 STS2011161H01 ALL Initial Issue Note: Format version of the report -V01 Page 5 of 35 Report No.: STS2011161H01 1. General Information 1.1 EUT Description Equipment Handheld Two way Radio Brand Name N/A Model name ST30 Series Model N/A Model Difference N/A Device Category Portable Product stage Production unit RF Exposure Environment Population/Uncontrolled Hardware Version ST30-C .PCB 2020.08.31 Ver4.0 Software Version ST30 CPS V1.1.8 Frequency Range Channel 1-7: 462.5625~462.7125 MHz Channel 8-14: 467.5625~467.7125 MHz Channel 15-22: 462.5500~462.7250 MHz Channel Spacing 12.5KHz Max. Reported SAR With 50% duty cycle Frequency(MHz) Face up (1g)(W/kg) Back Side (1g)(W/kg) Limbs SAR (10g)(W/kg) 462.6375 0.582 1.465 2.332 467.6375 0.190 0.259 0.782 462.6500 0.546 1.289 1.984 Limit 1.6 W/kg 4.0 W/kg Modulation Type: FM Antenna Specification: Inseparable Antenna Note: 1. The EUT battery must be fully charged and checked periodically during the test to ascertain uniform power Page 6 of 35 Report No.: STS2011161H01 1.2 Test Environment Ambient conditions in the SAR laboratory: Items Required Temperature (°C) 18-25 Humidity (%RH) 30-70 1.3 Test Factory ShenZhen STS Test Services Co.,Ltd. A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC Registration No.: 625569 A2LA Certificate No.: 4338.01 IC Registration No.: 12108A Page 7 of 35 Report No.: STS2011161H01 2. Test Standards and Limits No. Identity Document Title 1 47 CFR Part 2 Frequency Allocations and Radio Treaty Matters; General Rules and Regulations 2 ANSI/IEEE Std. C95.1-1992 IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz 3 IEEE Std. 1528-2013 Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques 4 FCC KDB 447498 D01 v06 Mobile and Portable Device RF Exposure Procedures and Equipment Authorization Policies 5 FCC KDB 865664 D01 v01r04 SAR Measurement 100 MHz to 6 GHz 6 FCC KDB 865664 D02 v01r02 RF Exposure Reporting 7 FCC KDB 643646 D001 SAR Test Reduction Considerations for Occupational PTT Radios (A). Limits for Occupational/Controlled Exposure (W/kg) Whole-Body Partial-Body Hands, Wrists, Feet and Ankles 0.4 8.0 20.0 (B). Limits for General Population/Uncontrolled Exposure (W/kg) Whole-Body Partial-Body Hands, W…

Text truncated - open the document above for the full version.

Page 1 of 50 FCC Test Report Report No.:AGC03535201102FE10 FCC ID : 2AYFQ-ST30 PRODUCT DESIGNATION : Handheld Two way Radio BRAND NAME : SFE MODEL NAME : ST30 APPLICANT : Quanzhou SFE Electronic Technology Co.,Ltd DATE OF ISSUE : Dec. 02, 2020 STANDARD(S) : FCC Part 95 Rules REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC03535201102FE10 Page 2 of 50 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Dec. 02, 2020 Valid Initial release Report No.: AGC03535201102FE10 Page 3 of 50 VERIFICATION OF COMPLIANCE Applicant Quanzhou SFE Electronic Technology Co.,Ltd Address No.35, Yangming Street, Shuangyang,Luojiang District,Quanzhou City,Fujian Provinc e 362012,China manufacturer Quanzhou SFE Electronic Technology Co.,Ltd Address No.35, Yangming Street, Shuangyang,Luojiang District,Quanzhou City,Fujian Provinc e 362012,China Factory Quanzhou SFE Electronic Technology Co.,Ltd Address No.35, Yangming Street, Shuangyang,Luojiang District,Quanzhou City,Fujian Provinc e 362012,China Product Designation: Handheld Two way Radio Brand Name: SFE Test Model ST30 Deviation No any deviation from the test method Condition of Test Sample Normal Date of Test: Nov. 17, 2020~Dec. 02, 2020 Test Result PASS Report Template AGCRT-US-PTT/RF WE HEREBY CERTIFY THAT: The above equipment was tested by Attestation of Global Compliance (Shenzhen) Co., Ltd. The data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in TIA/EIA 603. The sample tested as described in this report is in compliance with the FCC Rules Part 95 requirements. The test results of this report relate only to the tested sample identified in this report. Prepared By Donjon Huang (Project Engineer) Dec. 02, 2020 Reviewed By Calvin Liu (Reviewer) Dec. 02, 2020 Approved By Forrest Lei Authorized Officer Dec. 02, 2020 Report No.: AGC03535201102FE10 Page 4 of 50 TABLE OF CONTENTS 1. GENERAL INFORMATION .......................................................................................................................... 6 1.1 PRODUCT DESCRIPTION ....................................................................................................................... 6 1.2 RELATED SUBMITTAL(S)/GRANT(S) .................................................................................................... 8 1.3 TEST METHODOLOGY ........................................................................................................................... 8 1.4 ADDRESS OF THE TEST LABORATORY ............................................................................................... 8 1.5 TEST FACILITY ........................................................................................................................................ 8 1.6 SPECIAL ACCESSORIES ........................................................................................................................ 9 1.7 EQUIPMENT MODIFICATIONS ............................................................................................................... 9 1.8 ANTENNA REQUIREMENT ..................................................................................................................... 9 2. SYSTEM TEST CONFIGURATION ............................................................................................................. 10 2.1 EUT CONFIGURATION .......................................................................................................................... 10 2.2 EUT EXERCISE ..................................................................................................................................... 10 2.3 CONFIGURATION OF TESTED SYSTEM ............................................................................................ 10 2.4 MEASUREMENT UNCERTAINTY ........................................................................................................... 11 3. SUMMARY OF TEST RESULTS ................................................................................................................. 12 4. DESCRIPTION OF TEST MODES ............................................................................................................... 14 5. FREQUENCY TOLERANCE ........................................................................................................................ 15 5.1 PROVISIONS APPLICABLE ................................................................................................................... 15 5.2 MEASUREMENT PROCEDURE ............................................................................................................ 15 5.3 TEST SETUP BLOCK DIAGRAM ........................................................................................................... 16 5.4 TEST RESULT ........................................................................................................................................ 17 6. EMISSION BANDWIDTH ............................................................................................................................. 18 6.1 PROVISIONS APPLICABLE ................................................................................................................... 18 6.2 MEASUREMENT PROCEDURE ............................................................................................................ 18 6.3 TEST SETUP BLOCK DIAGRAM ........................................................................................................... 18 6.4 MEASUREMENT RESULT ..................................................................................................................... 20 7. UNWANTED RADIATION ............................................................................................................................ 22 7.1 PROVISIONS APPLICABLE ..............................................................................…

Text truncated - open the document above for the full version.

Page 1 of 50 FCC Test Report Report No.:AGC03535201102FE10 FCC ID : 2AYFQ-ST30 PRODUCT DESIGNATION : Handheld Two way Radio BRAND NAME : SFE MODEL NAME : ST30 APPLICANT : Quanzhou SFE Electronic Technology Co.,Ltd DATE OF ISSUE : Dec. 02, 2020 STANDARD(S) : FCC Part 95 Rules REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC03535201102FE10 Page 2 of 50 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Dec. 02, 2020 Valid Initial release Report No.: AGC03535201102FE10 Page 3 of 50 VERIFICATION OF COMPLIANCE Applicant Quanzhou SFE Electronic Technology Co.,Ltd Address No.35, Yangming Street, Shuangyang,Luojiang District,Quanzhou City,Fujian Provinc e 362012,China manufacturer Quanzhou SFE Electronic Technology Co.,Ltd Address No.35, Yangming Street, Shuangyang,Luojiang District,Quanzhou City,Fujian Provinc e 362012,China Factory Quanzhou SFE Electronic Technology Co.,Ltd Address No.35, Yangming Street, Shuangyang,Luojiang District,Quanzhou City,Fujian Provinc e 362012,China Product Designation: Handheld Two way Radio Brand Name: SFE Test Model ST30 Deviation No any deviation from the test method Condition of Test Sample Normal Date of Test: Nov. 17, 2020~Dec. 02, 2020 Test Result PASS Report Template AGCRT-US-PTT/RF WE HEREBY CERTIFY THAT: The above equipment was tested by Attestation of Global Compliance (Shenzhen) Co., Ltd. The data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in TIA/EIA 603. The sample tested as described in this report is in compliance with the FCC Rules Part 95 requirements. The test results of this report relate only to the tested sample identified in this report. Prepared By Donjon Huang (Project Engineer) Dec. 02, 2020 Reviewed By Calvin Liu (Reviewer) Dec. 02, 2020 Approved By Forrest Lei Authorized Officer Dec. 02, 2020 Report No.: AGC03535201102FE10 Page 4 of 50 TABLE OF CONTENTS 1. GENERAL INFORMATION .......................................................................................................................... 6 1.1 PRODUCT DESCRIPTION ....................................................................................................................... 6 1.2 RELATED SUBMITTAL(S)/GRANT(S) .................................................................................................... 8 1.3 TEST METHODOLOGY ........................................................................................................................... 8 1.4 ADDRESS OF THE TEST LABORATORY ............................................................................................... 8 1.5 TEST FACILITY ........................................................................................................................................ 8 1.6 SPECIAL ACCESSORIES ........................................................................................................................ 9 1.7 EQUIPMENT MODIFICATIONS ............................................................................................................... 9 1.8 ANTENNA REQUIREMENT ..................................................................................................................... 9 2. SYSTEM TEST CONFIGURATION ............................................................................................................. 10 2.1 EUT CONFIGURATION .......................................................................................................................... 10 2.2 EUT EXERCISE ..................................................................................................................................... 10 2.3 CONFIGURATION OF TESTED SYSTEM ............................................................................................ 10 2.4 MEASUREMENT UNCERTAINTY ........................................................................................................... 11 3. SUMMARY OF TEST RESULTS ................................................................................................................. 12 4. DESCRIPTION OF TEST MODES ............................................................................................................... 14 5. FREQUENCY TOLERANCE ........................................................................................................................ 15 5.1 PROVISIONS APPLICABLE ................................................................................................................... 15 5.2 MEASUREMENT PROCEDURE ............................................................................................................ 15 5.3 TEST SETUP BLOCK DIAGRAM ........................................................................................................... 16 5.4 TEST RESULT ........................................................................................................................................ 17 6. EMISSION BANDWIDTH ............................................................................................................................. 18 6.1 PROVISIONS APPLICABLE ................................................................................................................... 18 6.2 MEASUREMENT PROCEDURE ............................................................................................................ 18 6.3 TEST SETUP BLOCK DIAGRAM ........................................................................................................... 18 6.4 MEASUREMENT RESULT ..................................................................................................................... 20 7. UNWANTED RADIATION ............................................................................................................................ 22 7.1 PROVISIONS APPLICABLE ..............................................................................…

Text truncated - open the document above for the full version.

Test Setup Photos RADIATED EMISSION BELOW 1G TEST SETUP RADIATED EMISSION ABOVE 1G TEST SETUP

2AYFQ-ST30_SAR Setup photo Face up (separation distance is 25mm) Body Back side (separation distance is 0mm) Front Side (separation distance is 0mm) Left Edge(separation distance is 0mm) Right Edge(separation distance is 0mm) Top Edge(separation distance is 0mm) Bottom Edge(separation distance is 0mm)