2AYHJ-T1Wireless Controller

T-1 wireless controller is a wireless handle based on P4 host. At the same time, it is compatible with P5 host to play P4 games, P3 , PC, NB, Android and IOS.And equipped with the function to somatosensory, touch, dual-motor, 12 adjustable LED lights, and 3.5 wired earphone interface. The front and back of the handle picture (including content) I： Product introduction Manual of T-1 wireless controller 1: This product is suitable for P4 host, P5 play P4 games, P3, PC, NB, Android and IOS. 2: This product has a unique design, a sense of science and technology, and a comfortable feeling of holding hands and pressing buttons. 3: This product is equipped with double motor vibration function. 4: This product has six-axis somatosensory function and touch function. 5: This product is equipped with 12 adjustable LED atmosphere lights, 4 LED grips, 4 LED 3D, and 4 LED touch pads. It looks more scientific and technological when in use. You can adjust the required atmosphere lights according to your own preferences. 6: This product is equipped with external speaker and audio interface function of wired 3.5 headphones, which can be connected with wired headphones. 7: This product can wake up P4/P5 host with one key by pressing the HOME key. 8: This product has a built-in 600MHA polymer battery, with a normal use time of 8H and an extra-long standby time of 30 days. 9: The Bluetooth version of this product: 2.1+EDR II Product features 1: Connection with P4/P5 host When it is the first time to connect, you need to plug in the cable to register the pairing when the host is turned on. After pairing, you can unplug the cable by pressing the HOME button to realize wireless Bluetooth connection. For the second connection, just press the HOME button to realize Bluetooth connection. Once the host is dormant, directly press the HOME button of the handle to wake it up. 2: Connect with P3 host Connect with P3 host, only support wired mode, directly insert USB cable for connection operation, plug and play. Note：P3 host does not support the function to touch and audio output. III. Connection instructions 3: Connect with NB and PC 3.1 Wired mode, the computer does not have Bluetooth function. You can directly plug into the USB cable for connection The computer operating system is different. Some WIN7 computers need to be equipped with equipment, and WIN8 and above systems are plug and play. 3.2 Wireless mode Turn on computer Bluetooth-Bluetooth settings-Add Bluetooth devices-The computer starts searching for Bluetooth-the light flashes quickly when the handle is in standby state and the SHARE+HOME key is pressed, and Bluetooth pairing starts. At this time, the words "Wireless Controller" will appear on the computer-"Click to pair". After the pairing is successful, the handle channel light will be on. The pairing is unsuccessful, and the handle light goes out. Note: You can't play games with any handles on your computer, so you need to download a game platform like STEAM to the handles. The output of external headphones is only in wired mode on the computer. 4: Connect with Android and IOS Turn on Bluetooth-Bluetooth Settings-Start Bluetooth Search-Press the handle SHARE+HOME key at the same time when the handle is in standby state. The channel light flashes quickly, and Bluetooth pairing starts. At this time, the words "Wireless Controller" will appear on the phone-after the pairing of "Click to Pair", the handle channel light will be on continuously.The pairing is unsuccessful, and the handle light goes out. Note: Mobile phones are not compatible with any handles to play games, so you need to download a game platform such as Chicken Simulator and skylin Simulator to support handles. 5: Turning off the handle. When connected, press and hold the HOME key for 10 seconds, and the handle will be turned off. operation. channel support supported successful 6: Led regulating switch, regulating the atmosphere lamp in three levels. The default setting of the handle is that the first gear ambient light is on, the second gear is that the motor vibration ambient light is flashing, and the third gear is that the ambient light is all off. 1:HOME KEY 2:SHARE KEY 3:OPTION KEY 4:ACTION KEY 5:Direction key 6:lett joystick/L3 key 7:Right joystick/R3 key 8:L1 KEY 9:R1 KEY 10:TYPE C 11:led adjustment key 12:R2 key 13:L2 KEY 14:Reset key 15:Speaker 16:headphone 17:Touch 18:TP key FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolle…

Text truncated - open the document above for the full version.

FCC ID: 2AYHJ-T1 External Photos of the EUT Photo 1 Photo 2 Photo 3 FCC ID: 2AYHJ-T1 Photo 4 Photo 5 Photo 6 FCC ID: 2AYHJ-T1 Photo 7

Label and Location Size: L: 2.0cm*W: 1.0cm Label and Location Model No.: T1 FCC ID : 2AYHJ-T1

FCC ID: 2AYHJ-T1 Internal Photos of the EUT Photo 1 Photo 2 Photo 3 FCC ID: 2AYHJ-T1 Photo 4 Photo 5 Photo 6 FCC ID: 2AYHJ-T1 Photo 7 Photo 8 Photo 9 FCC ID: 2AYHJ-T1 Photo 10 Photo 11 Photo 12 BT Antenna FCC ID: 2AYHJ-T1 Photo 13

RF Exposure evaluation FCC ID: 2AYHJ-T1 1.1. Applicable Standard According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1093 RF exposure requirement KDB447498 v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies 1.2. Requirement According to KDB447498 D01 General RF Exposure Guidance v06 Section 4.3.1 Standalone SAR test exclusion considerations: “Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.23 “ [(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)] · [√f (GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 1.3. Manufacturing tolerance GFSK (Peak) Channel Channel 0 Channel 39 Channel 78 Target (dBm) -7.0 -7.0 -7.0 Tolerance ±(dB) 1.0 1.0 1.0 π/4DQPSK (Peak) Channel Channel 0 Channel 39 Channel 78 Target (dBm) -7.0 -7.0 -7.0 Tolerance ±(dB) 1.0 1.0 1.0 8-DPSK (Peak) Channel Channel 0 Channel 39 Channel 78 Target (dBm) -7.0 -7.0 -7.0 Tolerance ±(dB) 1.0 1.0 1.0 Page 2 of 2 2. E v a l u a t i o n R e s u l t Evaluation Results Band/Mode f (GHz) Antenna Distance (mm) RF output power (including tune-up tolerance) SAR Test Exclusion Threshold SAR Test Exclusion dBm mW BT 2.450 5 -6.0 0.2512 0.0786<3.0 Yes 3. C o n c l u s i o n The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06 .....................End of Report.........................

Compliance Certification Services Inc. Report No: T1411126D01 Date of Is s ue:2014/12/5 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Pa ge 1 Tota l Page: 19 Re v. 00 O O T T A A P P e e r r f f o o r r m m a a n n c c e e M M e e a a s s u u r r e e m m e e n n t t R R e e p p o o r r t t Report Ref. No. T141126D01 Applicant: Zeroplus Technology Co.,Ltd Date of Application: 2014/11/26 Test Period: 2014/12/1 Date of Issue:2014/12/5 Test Lab Info: Compliance Certification Services Inc. No.11, Wugong 6 th Rd., Wugu Industrial Park. Taipei Hsien 248, Taiwan, R.O.C. Test Item Name of Product: Anteena Gain Brand Name: ZEROPLUS Model/ Ref. No: RDA5875Y Name and Address of Manufacturer: 2F., No. 123, Jian 8th Rd., Zhonghe Dist., New Taipei City 23585, Taiwan Remarks: 2402MHz~2480MHz 3D Gain Measurement Results Confirmation Approved by Tested by Compliance Certification Services Inc. Report No: T141126D01 Date of Is s ue: 2014/12/5 Pa ge 2 Re v. 00 Revision History Rev. Is s ue Date Revi s i ons Effect Page Revi s ed By 00 2014/12/5 Ini ti al Is sue ALL Eas on.k.l i u Compliance Certification Services Inc. Report No: T141126D01 Date of Is s ue: 2014/12/5 Pa ge 3 Re v. 00 Table Of Contents 1 GENERAL INFORMATION .................................................................................................... 4 1.1 DESCRIPTION OF DEVICE UND ER TES T (D UT) ................................................................................................. 4 1.2 PRODUCT P HOTO................................................................................................................................................. 4 2 SUMMARY OF TEST RESULT ............................................................................................... 2.1 AMBIENT CO NDITION ......................................................................................................................................... 3 DESCRIPTION FOR DUT TESTING POSITION ....................................................................... 7 4 2D TEST PLOTTING .............................................................................................................. 8 5 3D TEST PLOTTING .....................................................................................................17 5 6 Compliance Certification Services Inc. Report No: T141126D01 Date of Is s ue: 2014/12/5 Pa ge 4 Re v. 00 1 General Information 1.1 Description of Device Under Test (DUT) Brand Name ZEROPLUS Model Name RDA5875Y Frequency 2402MHz~2480MHz Product Feature & Specification 1.2 Product Photo Compliance Certification Services Inc. Report No: T141126D01 Date of Is s ue: 2014/12/5 Pa ge 5 Re v. 00 1.3 Equipment Photo Compliance Certification Services Inc. Report No: T141126D01 Date of Is s ue: 2014/12/5 Pa ge Re v. 00 2 Summary of Test Result 2.1 Ambient Condition 22.4°C54% 240024502500 000 -11.8149-11.5297-11.8761 -7.36321-6.72032-6.81552 4.451664.809415.06058 -11.8149-11.5297-11.8761 6.584357.031176.49218 -7.36321-6.72032-6.81552 -13.4689-13.3-13.7452 -14.8995-14.8444-15.4325 -11.8149-11.5297-11.8761 Directivity (dBi) Efficiency (dB) Efficiency (%) Gain (dBi) Test / Position Temperature(°C)Humidity(°C) NHPRP ±Pi/4 (dBm) NHPRP ±Pi/6 (dBm) Average Gain (dB) Gain / Free Space Frequency Ant. Port Input Pwr. (dBm) Tot. Rad. Pwr. (dBm) Peak EIRP (dBm) Test result RDA5875Y 6 Compliance Certification Services Inc. Report No: T141126D01 Date of Is s ue: 2014/12/5 Pa ge Re v. 00 4 2D Test Plotting The tes t pl otti ng was s hown as bel ow Theta Po wer (d Bm ) Angl e (? Scal e: 5/di v Mi n: -40 Max : 10 0 180 30 210 60 240 90270 120 300 150 330 2402 Phi Po wer (d Bm ) Angl e (? Scal e: 5/di v Mi n: -40 Max : 10 0 180 30 210 60 240 90270 120 300 150 330 2402 Total Po wer (d Bm ) Angl e (? Scal e: 5/di v Mi n: -40 Max : 10 0 180 30 210 60 240 90270 120 300 150 330 2402 2D(X-Y Plane) RDA5875Y Antenna Gain Free Space-2402MHz 7 Compliance Certification Services Inc. Report No: T141126D01 Date of Is s ue: 2014/12/5 Pa ge Re v. 00 Theta Po wer (d Bm ) Angl e (? Scal e: 5/di v Mi n: -40 Max : 10 0 180 30 210 60 240 90270 120 300 150 330 2441 Phi Po wer (d Bm ) Angl e (? Scal e: 5/di v Mi n: -40 Max : 10 0 180 30 210 60 240 90270 120 300 150 330 2441 Total Po wer (d Bm ) Angl e (? Scal e: 5/di v Mi n: -40 Max : 10 0 180 30 210 60 240 90270 120 300 150 330 2441 2D(X-Y Plane) RDA5875Y Antenna Gain Free Space-2441MHz 8 Compliance Certification Services Inc. Report No: T141126D01 Date of Is s ue: 2014/12/5 Pa ge Re v. 00 Theta Po wer (d Bm ) Angl e (? Scal e: 5/di v Mi n: -40 Max : 10 0 180 30 210 60 240 90270 120 300 150 330 2480 Phi Po wer (d Bm ) Angl e (? Scal e: 5/di v Mi n: -40 Max : 10 0 180 30 210 60 240 90270 120 300 150 330 2480 Total Po wer (d Bm ) Angl e (? Scal e: 5/di v Mi n: -40 Max : 10 0 180 30 210 60 240 90270 120 300 150 330 2480 2D(X-Y Plane) RDA5875Y Antenna Gain Free Space-2480MHz 9 Compliance Certification Services Inc. Report No: T141126D01 Date of Is s ue: 2014/12/5 Pa ge Re v. 00 Theta Po wer (d Bm ) Angl e (? Scal e: 5/di v Mi n: -40 Max : 10 0 180 30 210 60 240 90270 120 300 150 330 2402 Phi Po wer (d Bm ) Angl e (? Scal e: 5/di v Mi n: -40 Max : 10 0 180 30 210 60 240 90270 120 300 150 330 2402 Total Po wer (d Bm ) Angl e (? Scal e: 5/di v Mi n: -40 Max : 10 0 180 30 210 60 240 90270 120 300 150 330 2402 2D(X-Z Plane) RDA5875Y Antenna Gain Free Space-2402MHz 10 Compliance Certification Services Inc. Report No: T141126D01 Date of Is s ue: 2014/12/5 Pa ge Re v. 00 Theta Po wer (d Bm ) Angl e (? Scal e: 5/di v Mi n: -40 Max : 10 0 180 30 210 60 240 90270 120 300 150 330 2441 Phi Po wer (d Bm ) Angl e (? Scal e: 5/di v Mi n: -40 Max : 10 0 180 30 210 60 240 90270 120 300 150 330 2441 Total Po wer (d Bm ) Angl e …

Text truncated - open the document above for the full version.

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. .................... : FCC ID. ........................................... : CTA22091401001 2AYHJ-T1 Compiled by ( position+printed name+signature) . : File administrators Zoey Cao Supervised by ( position+printed name+signature) . : Project Engineer Amy Wen Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Sep. 22, 2022 Testing Laboratory Name ............. : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ........................... : Dongguan Nuoyifan Technology Co.,Ltd. Address ............................................ : Room 401, No.22, 3th Street, Jinqianling, Huangjiang Town, Dongguan, Guangdong, China Test specification ........................... : Standard .......................................... : FCC Part 15.247 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : Wireless Controller Trade Mark ....................................... : N/A Manufacturer .................................... : Dongguan Nuoyifan Technology Co.,Ltd. Model/Type reference ...................... : T1 Listed Models .................................. : N/A Modulation ...................................... : GFSK, Π/4DQPSK, 8DPSK Frequency ......................................... From 2402MHz to 2480MHz Rating ............................................... : DC 3.7V From Battery and DC 5.0V From external circuit Result ............................................... : PASS Report No.: CTA22091401001 Page 2 of 50 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : Wireless Controller Model /Type : T1 Listed Models : N/A Applicant : Dongguan Nuoyifan Technology Co.,Ltd. Address : Room 401, No.22, 3th Street, Jinqianling, Huangjiang Town, Dongguan, Guangdong, China Manufacturer : Dongguan Nuoyifan Technology Co.,Ltd. Address : Room 401, No.22, 3th Street, Jinqianling, Huangjiang Town, Dongguan, Guangdong, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA22091401001 Page 3 of 50 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 T E S T S T A N D A R D S ................................................................. 4 2 S U M M A R Y ............................................................................ 5 2.1 General Remarks 5 2.2 Product Description 5 2.3 Equipment Under Test 5 2.4 Short description of the Equipment under Test (EUT) 5 2.5 EUT operation mode 6 2.6 Block Diagram of Test Setup 6 2.7 Related Submittal(s) / Grant (s) 6 2.8 Modifications 6 3 T E S T E N V I R O N M E N T .............................................................. 7 3.1 Address of the test laboratory 7 3.2 Test Facility 7 3.3 Environmental conditions 7 3.4 Summary of measurement results 8 3.5 Statement of the measurement uncertainty 8 3.6 Equipments Used during the Test 9 4 T E S T C O N D I T I O N S A N D R E S U L T S ........................................... 10 4.1 AC Power Conducted Emission 10 4.2 Radiated Emission 13 4.3 Maximum Peak Output Power 19 4.4 20dB Bandwidth 20 4.5 Frequency Separation 24 4.6 Number of hopping frequency 26 4.7 Time of Occupancy (Dwell Time) 28 4.8 Out-of-band Emissions 32 4.9 Pseudorandom Frequency Hopping Sequence 41 4.10 Antenna Requirement 42 5 T E S T S E T U P P H O T O S O F T H E E U T ......................................... 43 6 P H O T O S O F T H E E U T ........................................................... 44 Report No.: CTA22091401001 Page 4 of 50 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz. ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices Report No.: CTA22091401001 Page 5 of 50 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 2 S U M M A R Y 2.1 General Remarks Date of receipt of test sample …

Text truncated - open the document above for the full version.

Report No.: CTA22091401001 Page 35 of 50 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn π/4DQPSK (CH39) π/4DQPSK (CH78) reference reference 30MHz-1G 30MHz-1G 1G-25G 1G-25G Report No.: CTA22091401001 Page 36 of 50 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 8DPSK (CH00) 8DPSK (CH39) reference reference 30MHz-1G 30MHz-1G 1G-25G 1G-25G Report No.: CTA22091401001 Page 37 of 50 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 8DPSK (CH78) reference 30MHz-1G 3G-25G Report No.: CTA22091401001 Page 38 of 50 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Band-edge Measurements for RF Conducted Emissions: GFSK Left Band edge hoping off Right Band edge hoping off Left Band edge hoping on Right Band edge hoping on Report No.: CTA22091401001 Page 39 of 50 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn π/4DQPSK Left Band edge hoping off Right Band edge hoping off Left Band edge hoping on Right Band edge hoping on Report No.: CTA22091401001 Page 40 of 50 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 8DPSK Left Band edge hoping off Right Band edge hoping off Left Band edge hoping on Right Band edge hoping on Report No.: CTA22091401001 Page 41 of 50 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 4.9 Pseudorandom Frequency Hopping Sequence TEST APPLICABLE For 47 CFR Part 15C section 15.247 (a) (1) requirement: Frequency hopping systems shall have hopping channel carrier frequencies separated by a minimum of 25 kHz or the 20 dB bandwidth of the hop-ping channel, whichever is greater. Alternatively, frequency hopping systems operating in the 2400–2483.5 MHz band may have hopping channel carrier frequencies that are separated by 25 kHz or two-thirds of the 20 dB bandwidth of the hopping channel, whichever is greater, provided the systems operate with an output power no greater than 125 mW. The system shall hop to channel frequencies that are selected at the system hopping rate from a pseudo randomly ordered list of hopping frequencies. Each frequency must be used equally on the average by each transmitter. The system receivers shall have input bandwidths that match the hop-ping channel bandwidths of their corresponding transmitters and shall shift frequencies in synchronization with the transmitted signals. EUT Pseudorandom Frequency Hopping Sequence Requirement The pseudorandom frequency hopping sequence may be generated in a nice-stage shift register whose 5 th and 9 th stage outputs are added in a modulo-two addition stage. And the result is fed back to the input of the first stage. The sequence begins with the first one of 9 consecutive ones, for example: the shift register is initialized with nine ones. ● Number of shift register stages:9 ● Length of pseudo-random sequence:29-1=511 bits ● Longest sequence of zeros:8(non-inverted signal) An example of pseudorandom frequency hopping sequence as follows: Each frequency used equally one the average by each transmitter. The system receiver have input bandwidths that match the hopping channel bandwidths of their corresponding transmitter and shift frequencies in synchronization with the transmitted signals. Report No.: CTA22091401001 Page 42 of 50 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 4.10 Antenna Requirement Standard Applicable For intentional device, according to FCC 47 CFR Section 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. And according to FCC 47 CFR Section 15.247 (c), if transmitting antennas of directional gain greater than 6dBi are used, the power shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6dBi. Refer to statement below for compliance The manufacturer may design the unit so that the user can replace a broken antenna, but the use of a standard antenna jack or electrical connector is prohibited. Further, this requirement does not apply to intentional radiators that must be professionally installed. Antenna Connected Construction The maximum gain of antenna was -6.72032 dBi. Remark:The antenna gain is provided by the customer , if the data provided by the customer is not accurate, Shenzhen CTA Testing Technology Co., Ltd. does not assume any responsibility. Report No.: CTA22091401001 Page 43 of 50 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 5 T e s t S e t u p P h o t o s o f t h e E U T R…

Text truncated - open the document above for the full version.

FCC ID: 2AYHJ-T1 Test Setup Photos of the EUT