2AYHY-IPCSP112IP camera

SP111/SP112 QUICK STARTGUIDE Milesight IoT Co., Ltd. www.milesight.com/security User Manual Security ANPR (Parking) ANPR (Road Traffic) Table of Contents 1. Package Contents.............................................................................................................2. Hardware Overview................................................................................. 3. Dimensions..................................................................................................................... 4. Installa tion....................................................................................................................... 5. Configuration.................................................................................................................. 6. FCC Statement...................................................................................................... 24681517 www.milesight.com/security Limited Warranty Protection 36 months (for Camera) and 24 months (for Solar-powered Accessories) from the original purchase date against all manufacturing defects.: Loss or damage to the equipment due to improper maintenance, or failure tofollow operating instructions. If defects or damages are caused by the use of unauthorized parts or byservice by other than our authorized agent. Model:Date of Purchase:Serial Number:MAC Address: For details, please visit our website: www.milesight.com/security Dealer Stamp 12 13 1 2 1 3 1. Package Contents Camera Quick Start Guide x 1 Screwdriver x 1 DC cable x 1 Terminal x 3 Camera Safety Strap x 1 Waterproof Connector x 1 Optional SA02 Bracket A43 Junction Box A02 V2 Bracket BJ-N Bracket S100 Expansion Module Outdoor Wireless CPE Solar Panel Solar Kit (S100B55/S100B96) U type hoop x 2 Bracket Fasteners x 2 Dual Device Power Splitter DC+RS485 Cable Camera Power Cable Nuts × 4 Washers × 4 Spring washers × 4 M6 screws × 6 Hex Wrench x 1 Solar Panel Quick Start Guide www.milesight.com/security www.milesight.com/security 4G Solar-powered Camera x 1 1 4 1 5 Camera (SP111)Camera (SP112) ON/OFF V1 SW1 SW2 LED WIFIRST Reset WiFi SIM Card SlotSD Card Slot V1 U31 SW1 SW2 J1 EN NET2 NET1 R27 micro SD SIM ONOFF LED TF WIFIRST SIM micro SD SIM TF SIM 2. Hardware Overview Solar Panel Output Power Supply (M14-5) Solar Power Input www.milesight.com/security www.milesight.com/security MountingInterface Audio In *1 & Audio Out *1Green & Brown & Pink & Sky BlueAlarm In *1 & Alarm Out *1Yellow & Pure Blue & Purple & WhiteRS485Orange & Orange/WhiteEthernet PortPower Supply (M14-5)(used for power supply and RS485battery information communicationwith the battery system) LensIR LEDS MountingInterface Audio In *1 & Audio Out *1Green & Brown & Pink & Sky BlueWie gand Data 0/1Cyan & SepiaAlarm In *1 & Alarm Out *1Yellow & Pure Blue & Purple & WhiteRS485Orange & Orange/WhitePower Supply (M14-5)(used for power supply and RS485battery information communicationwith the battery system)Ethernet Port LensIR LEDSLight Sensor 1 6 1 7 3.Dimensions 1. Camera SP111 / SP112 SP111 260 120 120 120 394834 120 394834 SA02Units: mm 4* ƶ 7 96 78.5 400 260 150 100 96 4* ƶ 5 S100B55 765 25 150 230 597 207 630 397 60 S100B96 765 25 150 230 597 207 630 397 84 www.milesight.com/security www.milesight.com/security SP112 1 8 9 4. Installation Step 2: Place the solar panel kit horizontally www.milesight.com/security www.milesight.com/security Step 1: Use a screwdriver to open the back cover at the bottom of the camera. Insert the SD card and SIM card. V1 SW1 SW2 LED WIFIRST CAUTION The best installation direction for solar panels is due southinthe northern hemisphere and due north in thesouthernhemisphere.A compass must be used for positioningSolar panels should be installed in an openunobstructedplacedirectly facing towards the sun for better pawer efficiency.Lithium-ion battery should be put through at least onecharge-discharge cycle every 3 to 6 months to ensureproperoperation. 1 10 1 11 Step 3: Lift the two brackets Step 4: Fasten the brackets on both sides. Make sure the screw holes on the top plate line up with the bracket's inner holes. www.milesight.com/security www.milesight.com/security Step 5: Connect the Solar Panel Output to the Solar Power Input on the battery. Step 6: Secure the equipment onto a vertical pole (diameter 80mm–114mm) using U-type hoops and the provided fastener sets (including nuts, washers, and spring washers). Spring Plate Nuts Washer 1 12 1 13 ON: Solar energy is charging the battery OFF: Solar energy did not charge the battery Flashing: Battery capacity exceeds 95% and the battery is fully chargedON: Battery voltage is normal Slow Flashing: Battery voltage is insufficient and it flickersonce every 4 secondsQuick Flashing: Battery low voltage protection flashes onceevery 1 secondON: There is voltage output at the output terminal OFF: There is no voltage output at the output terminal Solar panel indicator Battery indicator Load indicator Colour Indicator Status www.milesight.com/security www.milesight.com/security Pole Installation A02 V2 SA02 Wall Installation Indicator Light Status: SA02 Bracket A43 GreenGreen Red Step8 : Connect the power output interface of the solar panel to the Camera Power Cable, and then connect the other end of the cable to the camera. After installingand securing the camera, check the status of the indicator lights. Camera Power Cable 1 14 1 15 Cable Connection1.Dual Device Power SplitterA 1-to-2 power cable. Used to simultaneously power two devices (e.g., a network bridgeand a camera) from a single solar output. Dual Device Power Splitter 2. Bridge Data & Power CableSupports various DC-powered devices (cameras, network bridges, etc.). Features RS485data transmission for solar system status monitoring. DC+RS485 Cable CPE www.milesight.com/security www.milesight.com/security 5. Configuration Step 1: Press the camera's WiFi button to turn on the WiFi. Step 2: Step 2: Use mobile devices or laptop to connect to the device's Wi-Fi. T…

Text truncated - open the document above for the full version.

Xiamen Milesight IoT Co., Ltd. Add: Building C09, Software Park Phase III, Xiamen 361024, Fujian, China Tel: +86 0592-5023060 Fax: +86 0592-5023065 Email: [email protected] Attestation Letter Date: 2026-07-17 To: FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: Our product IP camera, model: SP112, NW112, FCC ID: 2AYHY-IPCSP112, for marketing purpose, this product supports 2.4GWifi: 2412-2462MHz (802.11b/g/n ht20), 2422-2452MHz (802.11n ht40), GPS, GLONASS, Galileo, Bei Dou: 1559-1610MHz, 2G: GSM850, PCS 1900, 3G: Band II/IV/V, 4G: Band 2/4/5/7/12/13/25/26/38/41/66. The other functions, bands and modes was disabled to use by manufacturer in the software, the end user has no capability to activate it. Sincerely, Printed name:Zhenlong Tong Title:Manager

Xiamen Milesight IoT Co., Ltd. Add: Building C09, Software Park Phase III, Xiamen 361024, Fujian, China Tel: +86 0592-5023060 Fax: +86 0592-5023065 Email:[email protected] CFR 47 §2.911(d)(5)(i)(ii) Attestation Letter Attestation Letter Date: 2026-7-17 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i)(ii) Filing FCC ID: 2AYHY-IPCSP112 Xiamen Milesight IoT Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Xiamen Milesight IoT Co., Ltd. (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Xiamen Milesight IoT Co., Ltd. certifies that the equipment does not use Kaspersky's software information. Sincerely, Signature Printed Name: Zhenlong Tong Title: Manager

U.S. AGENT LETTER OF ATTESTATION Date: 2026-07-17 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2AYHY-IPCSP112 Xiamen Milesight IoT Co., Ltd. (“the Applicant”) certifies that, as of the date of the filing of the application, MS Video Technology USA (U.S. agent). is our designated U.S. agent for service of process for the above referenced FCC ID. Xiamen Milesight IoT Co., Ltd. (“the Applicant”) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. MS Video Technology USA (U.S. agent) accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: MS Video Technology USA Address:220 NE 51ST ST OAKLAND PARK, FL 33334 United States FRN: 0033456815 Tel.: (185) 522-2460 1 Email: [email protected] Signed by (printed name): Michael Slack Signature: Xiamen Milesight IoT Co., Ltd. Add: Building C09, Software Park Phase III, Xiamen 361024, Fujian, China FRN: 0030310346 Tel: +86 0592-5023060 Fax: +86 0592-5023065 Email:[email protected] Signature Printed Name: Zhenlong Tong Title: Manager

QA-FR-170-B Xiamen Milesight IoT Co., Ltd. Add: Building C09, Software Park Phase III, Xiamen 361024, Fujian, China Tel: +86 0592-5023060 Fax: +86 0592-5023065 Email:[email protected] FCC Authorization Date: 2026-07-17 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , Xiamen Milesight IoT Co., Ltd., hereby authorizes Bay Area Compliance Laboratories Corp.( Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp.(Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature: Printed name: Zhenlong Tong Title: Manager

QA-FR-171-A Xiamen Milesight IoT Co., Ltd. Add: Building C09, Software Park Phase III, Xiamen 361024, Fujian, China Tel: +86 0592-5023060 Fax: +86 0592-5023065 Email:[email protected] FCC Confidential Authorization Date: 2026-07-17 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AYHY-IPCSP112 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Xiamen Milesight IoT Co., Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Printed Name: Zhenlong Tong Title: Manager

Xiamen Milesight IoT Co., Ltd. Add: Building C09, Software Park Phase III, Xiamen 361024, Fujian, China Tel: +86 0592-5023060 Fax: +86 0592-5023065 Email: [email protected] DECLARATION OF SIMILARITY Date:2026-4-21 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: We, Xiamen Milesight IoT Co., Ltd., hereby declare that the product: IP camera, FCC ID：2AYHY-IPCSP112, model: NW112 is electrically identical with the model: SP112 which was tested by Bay Area Compliance Laboratories Corp.(Dongguan) with the same electromagnetic emissions and electromagnetic compatibility characteristics. The above models only differ in model name and appearance logo. Please contact me should there be need for any additional clarification or information. Best Regards, Signature: Printed Name: Zhenlong Tong Title: Manager

Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-EXP Page 1 / 14 EUT EXTERNAL PHOTOS Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-EXP Page 2 / 14 Model: SP112 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-EXP Page 3 / 14 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-EXP Page 4 / 14 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-EXP Page 5 / 14 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-EXP Page 6 / 14 Model: NW112 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-EXP Page 7 / 14 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-EXP Page 8 / 14 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-EXP Page 9 / 14 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-EXP Page 10 / 14 Solar Panel Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-EXP Page 11 / 14 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-EXP Page 12 / 14 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-EXP Page 13 / 14 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-EXP Page 14 / 14 *****END *****

Label location

Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-INP Page 1 / 18 EUT INTERNAL PHOTOS Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-INP Page 2 / 18 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-INP Page 3 / 18 WWAN Antenna(LTE 2): only receive Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-INP Page 4 / 18 Wifi Antenna 2(Chain 1) GPS Antenna Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-INP Page 5 / 18 Wifi Antenna 1(Chain 0) WWAN Antenna(LTE 1) Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-INP Page 6 / 18 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-INP Page 7 / 18 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-INP Page 8 / 18 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-INP Page 9 / 18 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-INP Page 10 / 18 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-INP Page 11 / 18 Contain FCC ID: XMR202212EG25GL Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-INP Page 12 / 18 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-INP Page 13 / 18 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-INP Page 14 / 18 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-INP Page 15 / 18 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-INP Page 16 / 18 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-INP Page 17 / 18 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2602S56454E-RF-INP Page 18 / 18 *****END *****

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2602S56454E-RF-00A Report Template Version: FCC-Wi-Fi-V2.4 Page 96 of 97 EXHIBIT C - RF EXPOSURE EVALUATION Maximum Permissible Exposure (MPE) Applicable Standard According to subpart §1.1310,15.247(i) systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1500 / / f/1500 30 1500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According to §1.1310 and §2.1091 RF exposure is calculated. Calculation formula: Prediction of power density at the distance of the applicable MPE limit S = PG/4R² = power density (in appropriate units, e.g. mW/cm 2 ); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); For simultaneously transmit system, the calculated power density should comply with: Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2602S56454E-RF-00A Report Template Version: FCC-Wi-Fi-V2.4 Page 97 of 97 Calculated Data: Mode Frequency Band (MHz) Antenna Gain ▲ Conducted output power including Tune- up Tolerance ▲ Evaluation Distance (cm) Power Density (mW/cm 2 ) MPE Limit (mW/cm 2 ) (dBi) (numeric)(dBm)(mW) 2.4G WiFi 2412-2462 3.64 2.31 21.0 125.8920.00 0.0579 1.0 GSM 850 824-849 0.8 1.20 26.0 398.1120.00 0.0953 0.5 PCS 1900 1850-19101.76 1.50 23.0 199.5320.00 0.0596 1.0 WCDMA B2 1850-19101.76 1.50 25.0 316.2320.00 0.0944 1.0 WCDMA B4 1710-17551.76 1.50 25.0 316.2320.00 0.0944 1.0 WCDMA B5 824-849 0.8 1.20 25.0 316.23 20.00 0.0757 0.5 LTE B2 1850-19101.76 1.50 25.0 316.23 20.00 0.0944 1.0 LTE B4 1710-17551.76 1.50 25.0 316.23 20.00 0.0944 1.0 LTE B5 824-849 0.8 1.20 25.0 316.23 20.00 0.0757 0.5 LTE B7 2500-25701.7 1.48 25.0 316.23 20.00 0.0931 1.0 LTE B12 699-716 0.24 1.06 25.0 316.23 20.00 0.0665 0.5 LTE B13 777-787 0.4 1.10 25.0 316.23 20.00 0.0690 0.5 LTE B25 1850-19151.76 1.50 25.0 316.23 20.00 0.0944 1.0 LTE B26 814-849 0.8 1.20 25.0 316.23 20.00 0.0757 0.5 LTE B38 2570-26201.7 1.48 25.0 316.23 20.00 0.0931 1.0 LTE B41 2496-26901.7 1.48 25.0 316.23 20.00 0.0931 1.0 LTE B66 1710-17801.76 1.50 25.0 316.23 20.00 0.0944 1.0 Note: 1. The Antenna Gain and Conducted output power including Tune-up Tolerance provided by manufacturer. 2. The device built in a certified WWAN Module, FCC ID: XMR202212EG25GL, certified on 2023/03/01. 2.4G Wifi can transmit simultaneously with WWAN: = S 2.4G Wifi / S limit-2.4G Wifi + S WWAN /S limit- WWAN =0.0579/1.0+0.069/0.5 =0.196 <1 Result: The device meet FCC MPE at 20 cm distance ***** END OF REPORT *****

Report Template Version: FCC-Wi-Fi-V2.4 Page 1 of 97 TEST REPORT Applicant: Xiamen Milesight IoT Co., Ltd. Address: Building C09, Software Park Phase III, Xiamen 361024, Fujian, China P r o d u c t N a m e : IP camera F C C I D : 2AYHY-IPCSP112 Standard(s): 47 CFR Part 15, Subpart C(15.247) ANSI C63.10-2020 KDB 558074 D01 15.247 Meas Guidance v05r02 Report Number: 2602S56454E-RF-00A Report Date: 2026/7/22 The above device has been tested and found compliant with the requirement of the relevant standards by Bay Area Compliance Laboratories Corp. (Dongguan). Reviewed By: Alice Tan Approved By: Pedro Yun Title: RF Supervisor Title: RF Supervisor Bay Area Compliance Laboratories Corp. (Dongguan) No.12, Pulong East 1 st Road, Tangxia Town, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: The information marked ▲ is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with ★.This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Each test item follows the test standard(s) without deviation. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2602S56454E-RF-00A Report Template Version: FCC-Wi-Fi-V2.4 Page 2 of 97 CONTENTS DOCUMENT REVISION HISTORY ······································································· 4 1. GENERAL INFORMATION ·············································································· 5 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ·············································· 5 1.2 ACCESSORY INFORMATION·························································································· 5 1.3 ANTENNA INFORMATION DETAIL▲ ··············································································· 5 1.4 EQUIPMENT MODIFICATIONS ······················································································· 5 2. SUMMARY OF TEST RESULTS ········································································ 6 3. DESCRIPTION OF TEST CONFIGURATION ······················································· 7 3.1 OPERATION FREQUENCY DETAIL ·················································································· 7 3.2 EUT OPERATION CONDITION ······················································································· 7 3.3 SUPPORT EQUIPMENT LIST AND DETAILS ········································································ 8 3.4 SUPPORT CABLE LIST AND DETAILS ··············································································· 8 3.5 BLOCK DIAGRAM OF TEST SETUP ················································································· 9 3.6 TEST FACILITY ······································································································· 11 3.7 MEASUREMENT UNCERTAINTY ··················································································· 11 4. REQUIREMENTS AND TEST PROCEDURES ····················································· 12 4.1 AC LINE CONDUCTED EMISSIONS ··············································································· 12 4.1.1 Applicable Standard ········································································································ 12 4.1.2 EUT Setup ··················································································································· 13 4.1.3 EMI Test Receiver Setup ·································································································· 13 4.1.4 Test Procedure ·············································································································· 14 4.1.5 Corrected Amplitude & Margin Calculation ············································································ 14 4.1.6 Test Result ··················································································································· 14 4.2 RADIATION SPURIOUS EMISSIONS ··············································································· 15 4.2.1 Applicable Standard ········································································································ 15 4.2.2 EUT Setup ··················································································································· 15 4.2.3 EMI Test Receiver & Spectrum Analyzer Setup ······································································· 17 4.2.4 Test Procedure ·············································································································· 17 4.2.5 Corrected Result& Margin Calculation ·················································································· 17 4.2.6 Test Result ··················································································································· 18 4.3 MINIMUM 6 DB EMISSION BANDWIDTH ········································································· 19 4.3.1 Applicable Standard ········································································································ 19 4.3.2 EUT Setup ··················································································································· 19 4.3.3 Test Procedure ·············································································································· 19 4.3.4 Test Result ···································…

Text truncated - open the document above for the full version.

深圳市英佳创电子科技有限公司 ShenzhenYingjichuangElectronicTechnologyCo.,Ltd. http://www.szsyjc.com 1 总部地址：深圳市光明区马田街道油麻岗路11号宏域光明谷C栋 HeadquartersAddress:BuildingC,HongyuGuangmingValley,No.11YoumaigangRoad, MaTianSubdistrict,GuangmingDistrict,ShenzhenCity 东莞分厂：东莞市桥头镇石水口银河三路2号英佳创产业园 DongguanBranchFactory:No.2,HegangThirdRoad,ShishuiKou,QiaotouTown,Dongguan City,GuangdongProvince,China,YingjiaChuangIndustrialPark 杭州办事处：杭州滨江区浦沿街道至仁街5号滨润科创园1栋509 CUSTOMERNAME 客户名称 CUSTOMERP/N 客户料号 23.001.000007 PARTNAME 品名 WIFI-1黑色FPC内置天线TOSMB公针L=90MM WIFI-1blackFPCbuilt-inantennaTOSMB standardpinL=90MM P/N 料号 YJC-6N090-S02 APPROVALREV. 版次 A0 DELIVERYDATE 送样日期 2024年06月17日June17th,2024 PREPAREDBY 承办 殷飞杰YinFeijie CHECKEDBY 审核 方文锋FangWenfeng APPROVEDBY 核准 肖汉XiaoHan CustomerApproved 客户承认 PreparedBy 承办 CheckedBy 审核 ApprovedBy 核准 Xiamen Milesight IoT Co., Ltd. 深圳市英佳创电子科技有限公司 ShenzhenYingjichuangElectronicTechnologyCo.,Ltd. http://www.szsyjc.com 2 HangzhouOffice:No.5,ZhirongStreet,Pu'anSubdistrict,BinjiangDistrict,Hangzhou. Building1,BinrunScienceandTechnologyPark,Room509 绵阳办事处：四川省绵阳市高新区绵兴东路35号万向高新国际4F-34号 MianyangOffice:No.34,4thFloor,WanxiangHigh-techInternationalBuilding,35th AvenueofMianxingRoad,High-techZone,MianyangCity,SichuanProvince 电话Telephone：0755-27810060传真Fax：0755-27810057网址Website：http://www.szsyjc.com 目录TableofContents 1、封面Cover。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。1 2、目录TableofContents。。。。。。。。。。。。。。。。。。。。。。。。。。。2 3、履历表CurriculumVitae。。。。。。。。。。。。。。。。。。。。。。。。。。。3 4、天线平面图Antennaplanview。。。。。。。。。。。。。。。。。。。。。。。。4 5、天线技术参数及环境性能测试Antennatechnicalparametersandenvironmental performancetesting 。。。。。。。。。。。。。。。。。。。。。。。。。。。。。 5-6 6、天线实物图Antennaphysicaldiagram。。。。。。。。。。。。。。。。。。。。。7 7、天线性能测试图Antennaperformancetestchart。。。。。。。。。。。。。。。。。7 8、2D.3D（2.4G/5G）测试数据2D.3D(2.4G/5G)TestData。。。。。。。。。。。。8-10 9、ROHS物料控制报告ROHSMaterialControlReport。。。。。。。。。。。。。。11-12 深圳市英佳创电子科技有限公司 ShenzhenYingjichuangElectronicTechnologyCo.,Ltd. http://www.szsyjc.com 3 履历表CurriculumVitae： 版本 Version 变更内容及更改原因 Changecontentandreasonsforthe change 日期 Date 发行 Release A/0 初版发行 Firsteditionrelease 2024 年 06 月 17 日 June17,2024 深圳市英佳创电子科技有限公司 ShenzhenYingjichuangElectronicTechnologyCo.,Ltd. http://www.szsyjc.com 4 天线平面图Antennaplanview： 深圳市英佳创电子科技有限公司 ShenzhenYingjichuangElectronicTechnologyCo.,Ltd. http://www.szsyjc.com 5 天线技术参数及环境测试Antennatechnicalparametersandenvironmentaltesting： 电气技术参数Electricaltechnicalparameters 电性能指标ElectricalSpecifications 频率范围2400-2500/5150-5850MHzFrequencyRange2400-2500/5150-5850MHz 电压驻波比＜1.92VSWR＜1.92 输入阻抗50ΩInputImpedance50Ω 方向全向DirectionAll 增益3.0±1dBiGain3.0±1dBi 机械指标MechanicalSpecifications 线材颜色 棕色 Wirecolorbrown 接口形式SMBInputconnectorSMB 线材长度90mmWirelength90mm 工作温度-20°C~+70°C Working Temperature -20°C~+70°C 工作湿度20%~80% Working Humidity 20%~80% 深圳市英佳创电子科技有限公司 ShenzhenYingjichuangElectronicTechnologyCo.,Ltd. http://www.szsyjc.com 6 环境性能测试 (Environmentalperformancetesting) : 项目(Project)测试条件(Testcondition)规格 (Specification) 储存环境 Storage Conditions Intheabsenceofspecifiedtesttemperature, humidity,airpressureisasfollows: 在没有指定的情况下测试温度、湿度、气压如下： 1.Temperatureis-45°C~+85°C 1.温度为-45°C~+85°C 2.Relativehumidityof20~80% 2.相对湿度为20~80% 3.Airpressureis86kpato106kpa 3.气压为86kpa-106kpa Electricaland mechanicalproperties isnormal 电气机械性能正常 高低温试验 highandlow temperaturetest Between85°Cand-45°Cfor5loops,then1-2 hundernormalconditions,checktheappearance quality. 在85°C与-45°C之间进行5次循环，然后在正常条件 下1-2H，检查外观质量。 Sizeshouldmeetthe requirementsand shouldsatisfythe contentwiththe electricaland mechanicalproperties 尺寸应满足规定并应满 足于机械、电气性能 耐恒定 湿热试验 Constantdampand hotresistance test 80+/-3%relativehumidity,temperaturetest: 40°C.Lasts2hafter,trytotakeoutthe determinationofelectricalproperties,within 5minaftertry1-2hunderarticlenormalthing, checktheappearancequality 相对湿度80±3%，试验温度：40°C.持续2H作用后， 试品取出后5min之内测定电气性能，试品在正常条 件下1-2H，检查外观质量 Sizeshouldmeetthe requirementsand shouldsatisfythe contentwiththe electricaland mechanicalproperties 尺寸应满足规定并应满 足于机械、电气性能 振动试验 vibrationtest 10-55hz,vibrationfrequencyrangeof displacementamplitude:0.35MM,acceleration amplitude:50.0M/S,sweepcycles:30times 振频范围10-55HZ，位移幅值：0.35MM， 加速度幅值：50.0M/S，扫频循环次数：30次 Electricaland mechanicalproperties isnormal 电气机械性能正常 跌落试验 falldowntest 1mhighaltitudeinaccordancewiththe perpendicularaxisfreedrop3times 1M高空按照互相垂直的轴方向自由跌落3次 Electricaland mechanicalproperties isnormal 电气机械性能正常 深圳市英佳创电子科技有限公司 ShenzhenYingjichuangElectronicTechnologyCo.,Ltd. http://www.szsyjc.com 7 天线实物图Antennaphysicaldiagram： 天线性能测试图Antennaperformancetestchart： 深圳市英佳创电子科技有限公司 ShenzhenYingjichuangElectronicTechnologyCo.,Ltd. http://www.szsyjc.com 8 2D、3D测试数据(2.4G/5G)2Dand3Dtestdata(2.4G/5G)： FrequencyEfficiency(%)Gain.(dBi) 2400MHz 45.393.64 2410MHz 47.322.98 2420MHz 48.423.26 2430MHz 48.533.22 2440MHz 50.933.14 2450MHz 49.552.92 2460MHz 50.472.95 2470MHz 50.932.79 2480MHz 49.092.60 2490MHz 49.772.50 2500MHz 44.162.55 5150MHz 51.642.83 5250MHz 58.212.72 5350MHz 59.023.17 5450MHz 59.022.75 5550MHz 62.092.46 5650MHz 56.492.80 5750MHz 56.362.22 5850MHz 55.722.02 Phi02D:Phi902DTheta902D 3D2400： 深圳市英佳创电子科技有限公司 ShenzhenYingjichuangElectronicTechnologyCo.,Ltd. http://www.szsyjc.com 9 3D2450： 3D2500： 3D5150： 3D5550： 深圳市英佳创电子科技有限公司 ShenzhenYi…

Text truncated - open the document above for the full version.