2AYI3-CG3221Value Stick

AXON PC STICK OPERATING SYSTEM RAM STORAGE WIFI BLUETOOTH MINI DISPLAY PORT HD OUTPUT USB PORTS TYPE-C MICRO SD CARD DEVICE DIMENSIONS WINDOWS 10 PRO 4 GB / 8 GB EMMC 64 GB / 128 GB AC3165/7265 ,SUPPORT DUAL BAND 2.4G&5G AC BLUETOOTH 4.0 DP 1.2 4K@60FPS (X1) 1.4 4K@30 FPS (APL) / (X1) 2.0 4K@60 FPS (GML) (X1) 3.1 (X2) 3.0 X1 512 GB 5.1 IN X 1.5 IN 2.PLUG-IN DEVICE TO TV OR MONITOR HD INPUT. 3.POWER ON YOUR DEVICE. 4. MAKE SURE YOUR MONITOR OR TV IS IN THE CORRECT INPUT MODE. 5-ENJOY YOUR FULL COMPUTER HOW TO SET UP 1.CONNECT THE POWER ADAPTER. AXON TECHNOLOGIES.COM FCC Statement ： This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1)this device may not cause harmful interference, and 2) this device must accept any interference received,including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures: - Reorient the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into and outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

DATE : 2021-01-13 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Jason Wu of Global United Technology Services Co., Ltd.and No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with QUANTUM GLOBAL CONSULTING LLC. and 2336 ne 172nd St. North Miami Beach, FL 33160 Signature: Name: Julia Motchalova Title: General manager Company: QUANTUM GLOBAL CONSULTING LLC.

Differences Declaration To whom concern, We company QUANTUM GLOBAL CONSULTING LLC. hereby declares: The product models CG3221, CG3222, CG3223, CG3224, CG3211, CG3212, CG3213, CG3214, CG3121, CG3122, CG3123, CG3124 are identical in the same PCB layout, interior structure and electrical circuits, The difference between different models is DDR capacity, EMMC capacity and OS and model name for commercial purpose. Differences are listed as bellow. Model DDR capacity eMMC capacity OS CG3221 4GHz 64GHz Windows 10 Pro CG3222 4GHz 64GHz Windows 10 IOT CG3223 4GHz 64GHz Linux CG3224 4GHz 64GHz Chrome CG3211 4GHz 32GHz Windows 10 Pro CG3212 4GHz 32GHz Windows IOT CG3213 4GHz 32GHz Linux CG3214 4GHz 32GHz Chrome CG3121 2GHz 64GHz Windows 10 Pro CG3122 2GHz 64GHz Windows IOT CG3123 2GHz 64GHz Linux CG3124 2GHz 64GHz Chrome Authorized signature: Date: 2021-01-13

Test Model No.: CG2221

CG3221 Model No: 2AYI3-CG3221

Size:45*10mm Lable location

Test Model No.: CG2221 WiFi Antenna 2 WiFi/BT Antenna 1

FCC ID: 2AYI3-CG3221 RF Exposure Evaluation Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Test Result of RF Exposure Evaluation Wireless function Output power to antenna (dBm) Antenna Gain(dBi) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result BT EDR 9.116 2.00 8.158 0.00257 1.000 PASS BT BLE 4.707 2.00 2.956 0.00093 1.000 PASS 2.4G WiFi 18.17 5.00(MIMO) 65.615 0.04128 1.000 PASS 5.1G WiFi 15.97 5.00(MIMO) 39.537 0.02487 1.000 PASS 5.8G SRD 15.04 5.00(MIMO) 31.915 0.02008 1.000 PASS Directional gain of MIMO = G ANT + 10 log(N ANT ) dBi=5.00dBi

Report No.: GTSL202101000066F03 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 26 of 64 Antenna 2: 802.11b 802.11g Lowest channel Middle channel Highest channel Report No.: GTSL202101000066F03 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 27 of 64 802.11n(HT20) 802.11n(HT40) Lowest channel Middle channel Highest channel Report No.: GTSL202101000066F03 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 28 of 64 7.6 Band edges 7.6.1 Conducted Emission Method Test Requirement: FCC Part15 C Section 15.247 (d) Test Method: KDB558074 D01 15.247 Meas Guidance v05r02 KDB 662911 D01 Multiple Transmitter Output v02r01 Limit: In any 100 kHz bandwidth outside the frequency band in which the spread spectrum intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement. Test setup: Test Instruments: Refer to section 6.0 for details Test mode: Refer to section 5.2 for details Test results: Pass Report No.: GTSL202101000066F03 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 29 of 64 Test plot as follows: Antenna 1: Test mode: 802.11b Lowest channel Highest channel Test mode: 802.11g Lowest channel Highest channel Report No.: GTSL202101000066F03 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 30 of 64 Test mode: 802.11n(HT20) Lowest channel Highest channel Test mode: 802.11n(HT40) Lowest channel Highest channel Report No.: GTSL202101000066F03 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 31 of 64 Antenna 2: Test mode: 802.11b Lowest channel Highest channel Test mode: 802.11g Lowest channel Highest channel Report No.: GTSL202101000066F03 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 32 of 64 Test mode: 802.11n(HT20) Lowest channel Highest channel Test mode: 802.11n(HT40) Lowest channel Highest channel Report No.: GTSL202101000066F03 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 33 of 64 7.6.2 Radiated Emission Method Test Requirement: FCC Part15 C Section 15.209 and 15.205 Test Method: ANSI C63.10: 2013 Test Frequency Range: All of the restrict bands were tested, only the worst band’s (2310MHz to 2500MHz) data was showed. Test site: Measurement Distance: 3m Receiver setup: Frequency Detector RBW VBW Value Above 1GHz Peak 1MHz 3MHz Peak Average 1MHz 3MHz Average Limit: Frequency Limit (dBuV/m @3m) Value Above 1GHz 54.00 Average 74.00 Peak Test setup: Test Procedure: 1. The EUT was placed on the top of a rotating table 1.5 meters above the ground at a 3 meter camber. The table was rotated 360 degrees to determine the position of the highest radiation. 2. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. 3. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. 4. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rota table was turned from 0 degrees to 360 degrees to find the maximum reading. 5. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. 6. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi- peak or average method as specified and then reported in a data sheet. 7. The radiation measurements are performed in X, Y, Z axis positioning. And found the Y axis positioning which it is worse case, only the test worst case mode is recorded in the report. Test Instruments: Refer to section 6.0 for details Test mode: Refer to section 5.2 for details Test results: Pass Report No.: GTSL202101000066F03 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 34 of 64 Measureme…

Text truncated - open the document above for the full version.

Global United Technology Services Co., Ltd. Report No.: GTSL202101000066F02 Authorized Signature: Robinson Lo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 34 TEST REPORT Applicant: QUANTUM GLOBAL CONSULTING LLC. Address of Applicant: 2336 ne 172nd St. North Miami Beach, FL 33160 Manufacturer/Factory: QUTHC Limited Address of Manufacturer/Factory: 7th Floor, Building C, Longsheng Industrial Park, Huiyang District, Huizhou City, Guangdong province (516211) P.R.China Equipment Under Test (EUT) Product Name: Value Stick Model No.: CG3221,CG3222,CG3223,CG3224,CG3211,CG3212, CG3213,CG3214, CG3121,CG3122,CG3123,CG3124 Trade Mark: AXON FCC ID: 2AYI3-CG3221 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of sample receipt: Oct. 20, 2020 Date of Test: Oct. 20 - Nov. 19, 2020 Date of report issued: Nov. 19, 2020 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTSL202101000066F02 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 34 2 Version Version No. Date Description 00 Nov. 19, 2020 Original Prepared By: Date: Nov. 19, 2020 Project Engineer Check By: Date: Nov. 19, 2020 Reviewer Report No.: GTSL202101000066F02 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 34 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE ........................................................................................................................................ 7 5.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 7 5.4 DEVIATION FROM STANDARDS ............................................................................................................. 7 5.5 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................... 7 5.6 TEST FACILITY .................................................................................................................................... 7 5.7 TEST LOCATION ................................................................................................................................. 7 5.8 ADDITIONAL INSTRUCTIONS ................................................................................................................. 7 6 TEST INSTRUMENTS LIST ..................................................................................................................... 8 7 TEST RESULTS AND MEASUREMENT DATA .................................................................................... 10 7.1 ANTENNA REQUIREMENT ................................................................................................................... 10 7.2 CONDUCTED EMISSIONS ................................................................................................................... 11 7.3 CONDUCTED OUTPUT POWER ........................................................................................................... 14 7.4 CHANNEL BANDWIDTH ...................................................................................................................... 16 7.5 POWER SPECTRAL DENSITY ............................................................................................................. 18 7.6 BAND EDGES .................................................................................................................................... 20 7.6.1 Conducted Emission Method ..................................................................................................... 20 7.6.2 Radiated Emission Method ........................................................................................................ 21 7.7 SPURIOUS EMISSION ......................................................................................................................... 24 7.7.1 Conducted Emission Method ..................................................................................................... 24 7.7.2 Radiated Emission Method ........................................................................................................ 26 8 TEST SETUP PHOTO ............................................................................................................................ 34 9 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 34 R…

Text truncated - open the document above for the full version.

Test Model No.: CG2221 Radiated Emission Conducted Emission