2AYPE-VWFC16INCHLAPTOP

IRX-8970_8980 Start Guide 4-V02-029-11(1) 4-V02-029-11(1) VJF141 / VJF161 Printed in China © 2023 VAIO Corporation              Security lock slot  DC IN port  Charge indicator  Air exhaust vent  USB port (USB 3.0) 2. Locating Parts and Controls1. Supplied Items  Camera or Face recognition compatible camera* 1  Camera privacy shutter ! Note Open the shutter before using the camera. To close the shutter, slide it to the left. To open the shutter, slide it to the right.  Camera indicator  IR LED* 2  Dual microphones ̨A C adapter ̨P ower cord ̨User ’s manuals (See Supplied User’s manuals.) ! Notes • Keep the shipping box of your VAIO computer until you make sure that you have all the supplied items. If you find anything missing or damaged, contact our Support experts via the website or your dealer before you dispose of the box. • The supplied accessories were tested and found functional solely with your VAIO computer. • Your VAIO computer can be recovered with the built-in hard disk or SSD and does not come with any recovery media. In case you could not recover the computer using the built-in hard disk or SSD, however, be sure to create your own recovery media with a USB flash drive before you first use your VAIO computer following your purchase. For detailed instructions on creating your own recovery media or recovering the computer, refer to Computer Recovery in the Safety Regulations/Recovery and Troubleshooting Guide. See the back side.  Touch pad  LCD screen  Air intake vent   Power button/  Power indicator/ Fingerprint sensor* 3  Keyboard* 4 * 5 * 1 Depends on the specifications of the product you purchased. * 2 On models with the Face recognition compatible camera. * 3 On models with the Fingerprint sensor. * 4 The keyboard with a numeric keypad and the Num Lock key is available on VJF161. * 5 Y our VAIO computer is not equipped with the Caps Lock indicator and the Num Lock indicator. You can identify if the Caps Lock and the Num Lock are on or off by the icon in the notification area at the lower right of the computer. (The icon image may change depending on the timing of shipment.)  Headset compatible headphone jack  microSD card slot Personal Computer Startup Guide User’s Manual The following information is applicable to ENERGY STAR qualified/certified products only. ENERGY STAR logos are attached or electronically displayed on the following locations of ENERGY STAR qualified/ certified products. - The pr oduct - The product packaging As an ENERGY STAR Partner, VAIO confirmed that this product meets the ENERGY STAR requirements for energy efficiency. The International ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of energy efficient computers and office equipment. The program supports the development and dissemination of products with functions that effectively reduce energy consumption to contribute to cost savings and reduction of environmental burdens. For detailed information on the ENERGY STAR Program, visit the following websites: https://www.energystar.gov/ This computer is designed in compliance with the ENERGY STAR standards and delivered with the following power saving settings that apply to the computer running on AC power: - The L CD backlight is turned off automatically after no more than 15 minutes of inactivity. - The computer enters Sleep mode automatically after no more than 30 minutes of inactivity. Press the  Power button to bring the computer back into Normal mode. Supplied User’s Manuals Congratulations on purchasing your VAIO computer! Your VAIO computer comes with the following user’s manuals: • Startup Guide (this user ’s manual) Please read this user’s manual first. You can find basic information, including connecting accessories to your VAIO computer, setting up Windows, and connecting your VAIO computer to the Internet. • Saf ety Regulations/Recovery and Troubleshooting Guide Please be sure to read this user’s manual. You can find information that helps you use your VAIO computer safely, including troubleshooting FAQs as well as instructions on recovering your VAIO computer and creating recovery media. ! Notes • Features and apps mentioned in these user’s manuals may not be available or preinstalled, depending on the model of your VAIO computer. • With the latest Windows updates applied to your VAIO computer, the operation procedures described in the user's manuals may vary from the actual ones. • The visual contents, such as illustrations, photos, and screenshots, used in the manuals may look different from what you actually see on your VAIO computer. VAIO Support Website You can find the latest VAIO support information. When you need any help for using your VAIO computer, visit our VAIO support website first. https://support.us.vaio.com/ About the INTEL END USER SOFTWARE LICENSE AGREEMENT Your VAIO computer includes software produced by Intel Corporation. The End User Software License Agreement for this software is available at the following web site, please read it before using your VAIO computer. https://us.vaio.com/pages/intel-eula About the ENERGY STAR® International Program FCC Information Supplier’s Declaration of Conformity Trade Name: VAIO Model No.: PC8970C11L, PC8980C11L Manufacturer: VAIO CORPORATION Responsible Party: E&S International Enterprises, Inc. Address: 7801 Hayvenhurst Avenue Van Nuys, California 91406 Telephone No.: 818-887-0700 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Operating Environment Conditions The operating environment conditions of your VAIO computer are as follows. Operating: temperature 5 °C to 35 °C (41 °F to 95 °F), humidity 20% to 80% (provided that no condensation is formed and the humi…

Text truncated - open the document above for the full version.

Rev 1/26/2023 E&S International Enterprises, Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 31 March 2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AYPE-VWFC16INCH E&S International Enterprises, Inc. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Ting Liu Rev 1/26/2023 E&S International Enterprises, Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 31 March 2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AYPE-VWFC16INCH E&S International Enterprises, Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Ting Liu

31 March 2023 Declaration Of Identity To Whom It May Concern: With regards to the application for Model: PC8980C11L, According to the designer, E&S International Enterprises, Inc. we hereby declare the difference between Model: PC8980C11L, and Model: PC898xxxxx (x can be 0-9, A-Z, a-z, dash or blank) as; Basic Model Number: PC8980C11L Basic Brand Name: VAIO Basic Product Name: LAPTOP Basic Certificate Number: ☐New/☒Additional Model Number(s): PC898xxxxx (x can be 0-9, A-Z, a-z, dash or blank) Declare the Circuit, PCB Layout, Electrical Parts, and appearance of the following product(s) are identical to the basic model: Except the following(s): Only model name are different. Yours Sincerely, ------------------------------- E&S International Enterprises, Inc. Charge Person Printed Name: Ting Liu

Date: 31 March 2023 E&S International Enterprises, Inc. To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: E&S International Enterprises, Inc. FCC ID: 2AYPE-VWFC16INCH FCC Certification Confidentiality Request Gentlemen: This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. E&S International Enterprises, Inc. requests that the following documents regarding this submission for FCC ID: 2AYPE-VWFC16INCH be kept confidential: Exhibit Type File Name Block Diagram Block Diagram.pdf Schematics Schematics.pdf Operational Description Operational Description.pdf General Description for UNII Devices General Description for UNII Devices. pdf And below exhibit kept short-term confidential (180 days): External photos External photos.pdf Test setup photos test photo.pdf Internal photos Internal photos.pdf User manual User manual.pdf Those documents contain detailed system and equipment description and related information about the product which E&S International Enterprises, Inc. considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, E&S International Enterprises, Inc. considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Yours Sincerely, Ting Liu

Date: 31 March 2023 E&S International Enterprises, Inc. To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The E&S International Enterprises, Inc., the undersigned, hereby authorizes Mr. Wu Xuewen from Shenzhen BALUN Technology Co., Ltd., to act on the behalf of the E&S International Enterprises, Inc. solely in matters relating to the application for an FCC equipment authorization for FCC ID: 2AYPE-VWFC16INCH including the signing of documents in connection with this Application. Necessary acts carried out by Shenzhen BALUN Technology Co., Ltd. in connection with the Application shall have the same effect as acts of the E&S International Enterprises, Inc.. The E&S International Enterprises, Inc. also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. Section 862. Yours Sincerely, Ting Liu

Report No.: BL-SZ2330183-AW 1 / 6 EUT EXTERNAL PHOTOS FRONT VIEW OF EUT REAR VIEW OF EUT Report No.: BL-SZ2330183-AW 2 / 6 LEFT VIEW OF EUT CLOSE-UP Report No.: BL-SZ2330183-AW 3 / 6 RIGHT VIEW OF EUT CLOSE-UP Report No.: BL-SZ2330183-AW 4 / 6 TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: BL-SZ2330183-AW 5 / 6 OPEN Accessory-Adapter Report No.: BL-SZ2330183-AW 6 / 6 CLOSE-UP --BLANK BELOW--

Label: Location：

Report No.: BL-SZ2330183-AI 1 / 7 EUT INTERNAL PHOTOS EUT UNCOVER VIEW 1 EUT UNCOVER VIEW 2 Report No.: BL-SZ2330183-AI 2 / 7 EUT UNCOVER VIEW 3 EUT UNCOVER VIEW 4 Aux Antenna Main Antenna Report No.: BL-SZ2330183-AI 3 / 7 MAIN BOARD TOP VIEW (WITH SHIELDING) MAIN BOARD TOP VIEW (WITHOUT SHIELDING) RF Chip Report No.: BL-SZ2330183-AI 4 / 7 MAIN BOARD REAR VIEW MAIN BOARD TOP VIEW Report No.: BL-SZ2330183-AI 5 / 7 MAIN BOARD REAR VIEW MAIN BOARD TOP VIEW Report No.: BL-SZ2330183-AI 6 / 7 MAIN BOARD REAR VIEW BATTERY (FRONT) Report No.: BL-SZ2330183-AI 7 / 7 BATTERY (REAR) --BLANK BELOW--

Report No.: BL-SZ2330183-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 11 Web: www.titcgroup.com Template No.: TRP-FCC-Portable-2 (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: E&S International Enterprises, Inc. Address: 7801 Hayvenhurst Avenue, Van Nuys, California 91406, United States. Equipment Type: LAPTOP Model Name: PC8980C11L (refer section 2.4) Brand Name: VAIO FCC ID: 2AYPE-VWFC16INCH Test Standard: 47 CFR Part 2.1093 KDB 447498 D04 v01 Sample Arrival Date: Mar. 01, 2023 Test Date: Mar. 07, 2023 - Apr. 01, 2023 Date of Issue: Apr. 03, 2023 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Julie zhu Checked by: Xiong Lining Approved by: Tolan Tu (Testing Director) _______________ _______________ _______________ Report No.: BL-SZ2330183-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 11 Web: www.titcgroup.com Template No.: TRP-FCC-Portable-2 (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Content Rev. 01 Apr. 03, 2023 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 3 1.1 Test Laboratory .............................................................................................................. 3 1.2 Test Location .................................................................................................................. 3 2 PRODUCT INFORMATION ......................................................................................................... 4 2.1 Applicant Information ...................................................................................................... 4 2.2 Manufacturer Information ............................................................................................... 4 2.3 Factory Information ........................................................................................................ 4 2.4 General Description for Equipment under Test (EUT) ................................................... 4 2.5 Ancillary Equipment ........................................................................................................ 4 2.6 Technical Information ..................................................................................................... 5 3 SUMMARY OF TEST RESULT ................................................................................................... 6 3.1 Test Standards ............................................................................................................... 6 4 DEVICE CATEGORY AND LEVELS LIMITS .............................................................................. 7 5 ASSESSMENT RESULT ............................................................................................................. 9 5.1 Output Power ................................................................................................................. 9 5.2 Tune-up power ............................................................................................................... 9 5.3 RF Exposure Evaluation Result ..................................................................................... 9 5.4 Conclusion .................................................................................................................... 10 Report No.: BL-SZ2330183-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 11 Web: www.titcgroup.com Template No.: TRP-FCC-Portable-2 (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1/F, Building B, Ganghongji High-tech Intelligent Industrial Park, No. 1008, Songbai Road, Yangguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong Province, P. R. China Accreditation Certificate The laboratory is a testing organization accredited by FCC as a accredited testing laboratory. The designation number is CN1196. Report No.: BL-SZ2330183-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 11 Web: www.titcgroup.com Template No.: TRP-FCC-Portable-2 (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant E&S International Enterprises, Inc. Address 7801 Hayvenhurst Avenue, Van Nuys, California 91406, United States. 2.2 Manufacturer Information Manufacturer E&S International Enterprises, Inc. Address 7801 Hayvenhurst Avenue, Van Nuys, California 91406, United States. 2.3 Factory Information Factory E&S International Enterprises, Inc. Address 7801 Hayvenhurst Avenue, Van Nuys, California 91406, United States. 2.4 General Description for Equipment under Test (EUT) EUT Name LAPTOP Model Name Under Test PC8980C11L Series Model Name PC898xxxxx (x can be 0-9, A-Z, a-z, dash or blank) Description of Model name differentiation All models are same with electrical parameters and internal circuit structure, but only differ in model name (this information provided by the customer). Hardware Version N/A Software Version N/A Dimensions (Approx.) N/A Weight (Approx.) N/A 2.5 Ancillary Equipment Ancillary Equipment 1 Battery Brand Name VAIO Model No. VJ8BPS61 Serial No. N/A Capacity 6644 m…

Text truncated - open the document above for the full version.

Doc.No.:3.8.05 Rev – 10.3 Regulatory WLAN Antenna Information 1/20 Regulatory WLAN Antenna Information (Template) English Language Required for Intel Regulatory Review / Approval (OEM/ODM or antenna vendor is required to complete this document with platform antenna information. Remove Intel references and make this your own document) Platform information Brand ODM ****End product model name Intel platform (ex: Yes, No or NA) Platform type (ex: regular NB, convertible PC, AIO...etc) *SAR minimum separation (mm) VAIO Quanta Corporation PC8980C11 Yes NB 249.8 *****Please fill in exact product model name and make sure the model name is visible on product cover or any parts for end users recognize for authority inspection. Antenna information Vendor Type Antenna Part number (Main) Antenna Part number (Aux) Pulse Electronics Corporation PIFA TQ23660 TQ23660 Peak gain w/ cable loss (dBi)* 2.4GHz 2400-2483.5 MHz 5.2GHz 5150-5250MHz 5.3GHz 5250-5350MHz 5.6GHz 5470-5725MHz 5.8GHz 5725-5850MHz 6.2GHz 5925-6425MHz 6.5GHz 6425-6525MHz 6.7GHz 6525-6875MHz 7.0 GHz 6875-7125MHz Main 1.78 1.29 1.29 1.52 1.52 2.26 0.49 0.58 -0.05 Aux 2.70 -1.72 -0.71 1.51 1.51 0.96 -0.41 2.05 1.72 Intel Reference Gain/Type/ Separation distance Antenna Type Antenna Peak gain (In dBi)* Distance to the end user (mm) 2.4GHz 2400-2483.5 MHz 5.2GHz 5150-5250MHz 5.3GHz 5250-5350MHz 5.6GHz 5470-5725MHz 5.8GHz 5725-5850MHz 6.2GHz 5925-6425MHz 6.5GHz 6425-6525MHz 6.7GHz 6525-6875MHz 7.0GHz 6875-7125MHz Generic: refer to modular FCC SAR report Mid-power: ≥ 8 mm Low power: ≥ 5 mm Design 3.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 PIFA 3.24 3.64 3.73 4.77 4.97 4.83 4.30 5.37 5.59 Dipole 2.89 2.92 3.19 4.41 4.22 4.83 4.30 4.49 5.34 Notes (marked with *) * SAR minimum separation (mm) - Regular NB: Minimum antenna-to-body (from antenna bottom to the bottom of the device) - Tablet / Convertible PC: Minimum antenna-to-edge (5 sides of the device) - Mini-tablet: Minimum antenna-to-edge (6 sides of the device) * 3D Peak Antenna gain should be equal or greater than -2 dBi - If a host integrator plans to use a lower gain antenna of the same type, additional CBP(FCC)/EDT(EU) testing need to be performed while the module is installed in the host. Doc.No.:3.8.05 Rev – 10.3 Regulatory WLAN Antenna Information 2/20 Table of contents 1. Applicable test method 2. Test & System Description a. Test setup b. Equipment list 3. Setup photo Section 1. Antenna Assembly Specifications Section 2. Dimensioned Photos or Drawings of Antennas Section 3. Radiation characteristics of antenna loaded in Host Platform Section 4. Antenna Host Platform Location Information Section 5. Antenna dimensional information for SAR evaluation Section 6. Diagram Example of Co-Location Antenna Separation Doc.No.:3.8.05 Rev – 10.3 Regulatory WLAN Antenna Information 3/20 1. Applicable test methods This test report is prepared for host antenna testing under a Full Anechoic Chamber. 2. Test & System Description a. Test setup Doc.No.:3.8.05 Rev – 10.3 Regulatory WLAN Antenna Information 4/20 b. Equipment list 3. Setup photo ID#DeviceType/ModelSerial#ManufactuterCal. DateCal. Due Date 1Anechoic ChamberAMS8500ETS-Lindgren2022-07-132023-07-13 2Turn TableETSETS-Lindgren2022-07-132023-07-13 3Switch & Positioning system2090ETS-Lindgren2022-07-132023-07-13 4Horn Antenna3164-0899210ETS-Lindgren2022-07-132023-07-13 5Network AnalyzerE5071CMY46103999Agilient2022-07-132023-07-13 6Open Boundary Quad-Ridged Horn3164-10240436ETS-Lindgren2022-07-132023-07-13 7cable 80 IN(Table01) 600MHz-18GHzRFC-SMS-100-SMSETS-Lindgren2022-07-132023-07-13 8cable 80 IN(Table02) 600MHz-18GHzRFC-SMS-100-SMSETS-Lindgren2022-07-132023-07-13 9cable 150cm---600MHz-18GHzSMAP-SMAP SF316D ETS-Lindgren2022-07-132023-07-13 10cable 85cm---600MHz-18GHzSMAP-SMAP SF316DETS-Lindgren2022-07-132023-07-13 11cable 80 IN 600MHz-18GHzRFC-SMS-100-SMSETS-Lindgren2022-07-132023-07-13 12cable 80 IN 600MHz-18GHzRFC-SMS-100-SMSETS-Lindgren2022-07-132023-07-13 13cable 80 IN 600MHz-18GHzRFC-SMS-100-SMSETS-Lindgren2022-07-132023-07-13 14cable 400 IN(Panel-Table)RFC-SMS-100-SMSETS-Lindgren2022-07-132023-07-13 15cable 400 IN(3102)RFC-SMS-100-SMSETS-Lindgren2022-07-132023-07-13 16cable 400 IN(3164-10 -V)RFC-SMS-100-SMSETS-Lindgren2022-07-132023-07-13 17cable 400 IN(3164-10 -H)RFC-SMS-100-SMSETS-Lindgren2022-07-132023-07-13 Doc.No.:3.8.05 Rev – 10.3 Regulatory WLAN Antenna Information 5/20 Antenna Information Section 1. Antenna Assembly Specifications 1A 1B 1C 1D 1E 1F 1G 1H Antenna Part Number Manufacturer Antenna Type Cable Assembly Part Number and Information Freq Range MHz * Peak Gain W/ Cable loss (dBi) Peak Gain w/o Cable Loss (dBi) Max VSWR Cable Loss (dB) Pulse P/N: TQ23660 Main Antenna Pulse PIFA Connector: 958-C413-W-B-Hu-A0 or compatible. Cable: SY113L/50-001 or compatible.50 ohm Coaxial length: 440mm diameter: 1.13LLSmm 2400-2483.5 1.78 3.13 3.00 max 1.35 5150-5250 1.29 3.08 3.00 max 1.79 5250-5350 1.29 3.10 3.00 max 1.81 5470-5725 1.52 3.40 3.00 max 1.88 5725-5850 1.52 3.41 3.00 max 1.89 5925-6425 2.26 4.26 3.00 max 2.00 6425-6525 0.49 2.50 3.00 max 2.01 6525-6875 0.58 2.65 3.00 max 2.07 6875-7125 -0.05 2.05 3.00 max 2.10 Pulse P/N: TQ23660 Aux Antenna Pulse PIFA Connector: 958-C413-W-B-Hu-A0 or compatible. Cable: SY113L/50-001 or compatible.50 ohm Coaxial length: 629mm diameter: 1.13LLSmm 2400-2483.5 2.70 4.61 3.00 max 1.91 5150-5250 -1.72 0.82 3.00 max 2.54 5250-5350 -0.71 1.86 3.00 max 2.57 5470-5725 1.51 4.18 3.00 max 2.67 5725-5850 1.51 4.19 3.00 max 2.68 5925-6425 0.96 3.79 3.00 max 2.83 6425-6525 -0.41 2.44 3.00 max 2.85 6525-6875 2.05 4.99 3.00 max 2.94 6875-7125 1.72 4.69 3.00 max 2.97  3D Antenna Peak Gain required being test in system basis. Doc.No.:3.8.05 Rev – 10.3 Regulatory WLAN Antenna Information 6/20 Section 2. Dimensioned Photos and Drawings of Antennas Include the dimensioned photo and drawing of Main antenna here. Main Antenna Drawing: Main Antenna Photo (Front/Back): Note: antenna photo should include L type ruler D…

Text truncated - open the document above for the full version.

Report No.: BL-SZ2330183-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 69 Web: www.titcgroup.com Template No.: TRP-FCC Part 15.247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: E&S International Enterprises, Inc. Address: 7801 Hayvenhurst Avenue, Van Nuys, California 91406, United States. Equipment Type: LAPTOP Model Name: PC8980C11L (refer section 2.4) Brand Name: VAIO FCC ID: 2AYPE-VWFC16INCH Test Standard: 47 CFR Part 15 Subpart C (refer section 3.1) Sample Arrival Date: Mar. 01, 2023 Test Date: Mar. 07, 2023 - Mar. 09, 2023 Date of Issue: Mar. 30, 2023 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Julie Zhu Checked by: Ye Hongji Approved by: Liao Jianming (Technical Director) _______________ _______________ _______________ Report No.: BL-SZ2330183-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 69 Web: www.titcgroup.com Template No.: TRP-FCC Part 15.247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Mar. 30, 2023 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 4 1.1 Test Laboratory .............................................................................................................. 4 1.2 Test Location .................................................................................................................. 4 2 PRODUCT INFORMATION ......................................................................................................... 5 2.1 Applicant Information ...................................................................................................... 5 2.2 Manufacturer Information ............................................................................................... 5 2.3 Factory Information ........................................................................................................ 5 2.4 General Description for Equipment under Test (EUT) ................................................... 5 2.5 Technical Information ..................................................................................................... 6 3 SUMMARY OF TEST RESULTS ................................................................................................. 8 3.1 Test Standards ............................................................................................................... 8 3.2 Test Verdict .................................................................................................................... 8 4 GENERAL TEST CONFIGURATIONS ........................................................................................ 9 4.1 Test Environments ......................................................................................................... 9 4.2 Test Equipment List ........................................................................................................ 9 4.3 Test Software List ........................................................................................................... 9 4.4 Measurement Uncertainty ............................................................................................ 10 4.5 Description of Test Setup ............................................................................................. 10 4.6 Measurement Results Explanation Example ................................................................ 13 5 TEST ITEMS .............................................................................................................................. 14 5.1 Antenna Requirements ................................................................................................. 14 5.2 Frequency Hopping Systems ....................................................................................... 15 5.3 Number of Hopping Frequencies ................................................................................. 17 5.4 Peak Output Power ...................................................................................................... 18 Report No.: BL-SZ2330183-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 69 Web: www.titcgroup.com Template No.: TRP-FCC Part 15.247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 5.5 Occupied Bandwidth .................................................................................................... 19 5.6 Carrier Frequency Separation ...................................................................................... 20 5.7 Time of Occupancy (Dwell time) .................................................................................. 21 5.8 Conducted Spurious Emission & Authorized-band band-edge .................................... 23 5.9 Conducted Emission .................................................................................................... 24 5.10 Radiated Spurious Emission ........................................................................................ 25 5.11 Band Edge (Restricted-band band-edge) ..................................................................... 27 ANNEX A TEST RESULT ............................................................................................................. 28 A.1 Number of Hopping Frequency .................................................................................... 28 A.2 Peak Output Power ...................................................................................................... 29 A.3 20 dB and 99% bandwidth ........................................................................................... 32 A.4 Hopping Frequency Se…

Text truncated - open the document above for the full version.

Report No.: BL-SZ2330183-AR 1 / 6 TEST SETUP PHOTOS 1 Radiated Test Photo Below 30MHz 30MHz-1GHz Report No.: BL-SZ2330183-AR 2 / 6 Close-up Above 1GHz Report No.: BL-SZ2330183-AR 3 / 6 Close-up 2 Conducted Test Photo Conducted Test-BT Report No.: BL-SZ2330183-AR 4 / 6 Conducted Test-2.4G WIFI Conducted Test-5G WIFI Report No.: BL-SZ2330183-AR 5 / 6 DFS Test 3 Conducted Emissions Test Photo 1 Report No.: BL-SZ2330183-AR 6 / 6 Test Photo 2 --BLANK BELOW--