2AYT3-AC200LPortable Power Station

AC200L Portable Power Station User Manual V2.0 Please read this manual carefully before use and keep it for future reference. Warning 1. Charge the unit before first use. 2. Do not use solar panels with open circuit voltage higher than 145VDC. Solar input voltage range for the unit is 12V-145VDC. 3. Charge the unit immediately when the SoC drops below 5%. If the SoC drops to 0, power off the unit and charge it for at least 30 minutes before restarting. 4. The unit is for off-grid use only. Do not connect its AC output to the grid. 5. If not used for more than 3 months, charge the unit to 40%-60% SoC and store it with the power off. For optimum battery life, discharge and charge the unit every 3 months. Notice BLUETTI's products, services, and features are subject to the agreed-upon terms and conditions during purchase. Please note that some products, services, or features described in this manual may not be available under your purchase contract. Unless otherwise specified in the contract, BLUETTI makes no representations or warranties of any kind, express or implied, with respect to the contents of this manual. The contents of this manual are subject to change without notice. Please get the latest version f rom official BLUETTI website. If you have any questions or concerns about this manual, please contact BLUETTI support for further assistance. Thank You! Thank you for making BLUETTI a part of your family. From the very beginning, BLUETTI has tried to stay true to a sustainable future through green energy storage solutions while delivering an exceptional eco-f riendly experience for our homes and our world. That's why BLUETTI makes its presence in 100+ countries and is trusted by millions of customers across the globe. Copyright © Shenzhen PowerOak Newener Co., Ltd. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without the prior written consent of Shenzhen PowerOak Newener Co., Ltd. France Germany Netherlands Safety Instructions Packing List Product Introduction Product Overview Power ON / OFF LED Screen Charging Discharging Settings Connect to Expansion Battery BLUETTI App Specifications Button Operation Instructions Troubleshooting Contents 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Appx. 1 Estimating Operation Time Appx. 2 FAQ Appx. 3 FCC Statement Appx. 4 IC Caution Appx. 5 Consignes de sécurité 05 09 11 12 13 14 16 19 20 24 25 25 27 28 30 31 32 33 34 1. Safety Instructions Read this manual for instructions on the proper use and safety information for the product. The safety instructions provided herein are for illustrative purposes that include but are not limited to those listed in this manual. Actual operation shall comply with all applicable safety standards. If you have any questions, feel f ree to contact BLUETTI support or your local BLUETTI dealers. 1.1 Statement To ensure a safe operation, it's crucial to observe and adhere to the following conditions: • Always operate or store the product in the conditions specified in this manual. • Avoid unauthorized disassembly, component replacement, or modification of software codes. BLUETTI shall not be liable for damages resulting f rom the following circumstances • Force majeure events such as earthquakes, fires, storms, floods, or mudslides. • Damage caused by the customer's own transportation. • Damage resulting f rom inadequate storage conditions as specified in the manual. • Damage caused by customer negligence, improper operation, or intentional actions. • System or hardware damage caused by third parties or customers, including but not limited to improper handling and installation not in accordance with the instructions in this manual. • Usage of the product with devices that require a high-performance Uninterruptible Power Supply (UPS), including but not limited to data servers, workstations, medical equipment, and other similar devices. 1.2 General Requirements INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS IMPORTANT SAFETY INSTRUCTIONS WARNING When using this product, basic precautions should always be followed, including the following: • Read all the instructions before using the product. • To reduce the risk of injury, close supervision is necessary when the product is used near children. • Do not put fingers or hands into the product. And do not insert foreign objects into any JUST POWER ON05 ports of the product. • Use of an attachment not recommended or sold by the manufacturer may result in a risk of fire, electric shock, or injury to persons. • To reduce the risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the product. • Do not use a battery pack or appliance that is damaged or modified, as they may exhibit unpredictable behavior resulting in fire, explosion, or personal injury. • Do not operate the product with a damaged cord or plug, or a damaged output cable. • Do not attempt to replace the internal battery or any other component of the product by anyone other than authorized personnel. There are no end-user serviceable components. Do not disassemble the product, take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or electric shock. • To reduce the risk of electric shock, unplug the product f rom the outlet before attempting any instructed servicing. • WARNING - RISK OF EXPLOSIVE GASES. To reduce the risk of battery explosion, follow these instructions and those published by the battery manufacturer and manufacturer of any equipment you intend to use in the vicinity of the battery. Review cautionary markings on these products and engines. • PERSONAL PRECAUTIONS a. Wear complete eye protection and clothing protection. Avoid touching eyes while work- ing near the battery. b. Never smoke or allow a spark or flame in the vicinity of the battery or engine. c. Be extra cautious to reduce the risk of dropping a meta…

Text truncated - open the document above for the full version.

SHENZHEN POWEROAK NEWENER CO., LTD F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 11-20-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AYT3-AC200L Product Name: Portable Power Station Model Name: AC200L [SHENZHEN POWEROAK NEWENER CO., LTD] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Cara Zou)

SHENZHEN POWEROAK NEWENER CO., LTD F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 11-20-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AYT3-AC200L Product Name: Portable Power Station Model Name: AC200L [SHENZHEN POWEROAK NEWENER CO., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Cara Zou)

2.911 (d)(7)USA Agent v1.5 Section 2.911(d)(7) USA Agent for Service of Process Company name: SHENZHEN POWEROAK NEWENER CO., LTD Address: F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Product Name: Portable Power Station FCC ID: 2AYT3-AC200L Model(s): AC200L 2.911(d)(7) USA Designated Agent for Service of Process We, [SHENZHEN POWEROAK NEWENER CO., LTD] (“the applicant”) designate [BLUETTI POWEROAK INC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: BLUETTI POWEROAK INC USA Address: 6185 S VALLEY VIEW BLVD STE D LAS VEGAS NEVADA 89118 United States FRN Number: 0033559824 Contact Name: Qiyao Li Telephone No: +1-512-966-1898 1 Email: [email protected] Applicant Company name: SHENZHEN POWEROAK NEWENER CO., LTD Address: F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Grantee FRN Number: 0030496780 Contact Name: Cara Zou Telephone No: +86-752-5192099 Email: [email protected] 2.911 (d)(7)USA Agent v1.5 Signature: Title: CEO Signature: Title: Manager Date: 2023-10-19 Date: 2023-10-19 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against- national-security-threats-to-the-communications-supply-chain-through-the

SHENZHEN POWEROAK NEWENER CO., LTD F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Nov. 20, 2023 Subject; Request for Confidentiality FCC ID: 2AYT3-AC200L To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List Antenna Specification FCC_Confidential Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Cara Zou Title: Manager

Letter of Authorization Company: SHENZHEN POWEROAK NEWENER CO., LTD Address: F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Product Name: Portable Power Station Model Number(s): AC200L Product Description: Portable Power Station We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Nov. 20, 2023 Name: Cara Zou Title: Manager Company: SHENZHEN POWEROAK NEWENER CO., LTD

Report No.: AGC01741230905AP02 Page 1 of 5 EXTERNAL PHOTOS TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: AGC01741230905AP02 Page 2 of 5 FRONT VIEW OF EUT BACK VIEW OF EUT Report No.: AGC01741230905AP02 Page 3 of 5 LEFT VIEW OF EUT RIGHT VIEW OF EUT Report No.: AGC01741230905AP02 Page 4 of 5 PORT VIEW-1 OF EUT PORT VIEW-2 OF EUT Report No.: AGC01741230905AP02 Page 5 of 5 PORT VIEW-3 OF EUT PORT VIEW-4 OF EUT ****************************************End of Report*************************************

279.6mm 7mm 119.6mm R8mm P/N: 17.0301.1280-01A1MADE IN CHINA FCC ID: 2AYT3-AC200LIC: 29079-AC200L CONFORMS TO ANSI/CAN/UL STD.2743 Input: AC: 120V 50/60Hz, 20A Max. DC: 12V-30V 8A PV: 12V-145V 15A Max. Battery Expansion: 51.2V 60A Max. Discharging Temperature: -20°C-40°C/-4°F-104°F Charging Temperature: 0°C-40°C/32°F-104°F Working Humidity: 10%-90% AC: 120V 50/60Hz, 2400W Max. Aviation Sockets: 48V 8A USB-A: 5V 3A, 9V 2A, 12V 1.5A, 18W Each USB-C: 5/9/12/15/20V 3A, 20V 5A (100W for one, 150W for two) Cigarette Lighter Port: 12V 10A AC and DC output: 2500W Total Battery Expansion: 51.2V 60A Max. Portable Power Station Output: Model: AC200LBattery Capacity: 2048Wh, 51.2V 40Ah SHENZHEN POWEROAK NEWENER CO., LTD. Address: F19, BLD No.1, Kaidaer, Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China CAUTION • Risk of Electric Shock. Do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel. • Risk of Electric Shock. Connect only to properly grounded outlets. • Risk of Injury To Persons. Do not use this product if the power cord or the battery cables are damaged in any way. • Risk of Electric Shock. Never use portable power pack to supply power tools to cut or access live parts or live wirings. • This device is not intended for use in a commercial repair facility. MISE EN GARDE • Risque de décharge électrique.Ne pas enlever le couvercle. Aucune des pièces à l'intérieur ne peut être réparée par l'utilisateur. L'entretien courant doit être effectué par un personnel d'entretien qualifié. • Risque de décharge électrique.Brancher l'unité uniquement à des prises de courant correctement mises à la masse. • Risque de blessure aux personnes. Ne pas utiliser ce produit si le cordon d'alimentation ou les câbles de batterie sont endommagés de quelque façon. • Risque de décharge électrique. N’utilisez jamais de bloc d’alimentation portable pour fournir des outils électriques pour couper ou accéder à des pièces sous tension ou à des câblages endirect. • Le dispositif n'est pas destiné à être utilisé dans un atelier de réparation commercial. DANGER • Pour éviter tout contact avec des liquides, n'utilisez pas ce produit sous la pluie. DANGER • To avoid contact with any liquids, do not use this product in the rain. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Report No.: AGC01741230905AP02 Page 1 of 14 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC01741230905AP02 Page 2 of 14 OPEN VIEW OF EUT (FIGURE 3) OPEN VIEW OF EUT (FIGURE 4) Report No.: AGC01741230905AP02 Page 3 of 14 OPEN VIEW OF EUT (FIGURE 5) INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC01741230905AP02 Page 4 of 14 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC01741230905AP02 Page 5 of 14 INTERNAL VIEW OF EUT (FIGURE 4) INTERNAL VIEW OF EUT (FIGURE 5) Report No.: AGC01741230905AP02 Page 6 of 14 INTERNAL VIEW OF EUT (FIGURE 6) INTERNAL VIEW OF EUT (FIGURE 7) Report No.: AGC01741230905AP02 Page 7 of 14 INTERNAL VIEW OF EUT (FIGURE 8) INTERNAL VIEW OF EUT (FIGURE 9) Report No.: AGC01741230905AP02 Page 8 of 14 INTERNAL VIEW OF EUT (FIGURE 10) INTERNAL VIEW OF EUT (FIGURE 11) Report No.: AGC01741230905AP02 Page 9 of 14 INTERNAL VIEW OF EUT (FIGURE 12) INTERNAL VIEW OF EUT (FIGURE 13) Report No.: AGC01741230905AP02 Page 10 of 14 INTERNAL VIEW OF EUT (FIGURE 14) INTERNAL VIEW OF EUT (FIGURE 15) BT/WIFI Antenna Report No.: AGC01741230905AP02 Page 11 of 14 INTERNAL VIEW OF EUT (FIGURE 16) INTERNAL VIEW OF EUT (FIGURE 17) Report No.: AGC01741230905AP02 Page 12 of 14 INTERNAL VIEW OF EUT (FIGURE 18) INTERNAL VIEW OF EUT (FIGURE 19) Report No.: AGC01741230905AP02 Page 13 of 14 INTERNAL VIEW OF EUT (FIGURE 20) INTERNAL VIEW OF EUT (FIGURE 21) Report No.: AGC01741230905AP02 Page 14 of 14 INTERNAL VIEW OF EUT (FIGURE 22) INTERNAL VIEW OF EUT (FIGURE 23) ****************************************End of Report*************************************

Page 1 of 10 RF Exposure Report Report No.: AGC01741230905FH01 FCC ID : 2AYT3-AC200L APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Portable Power Station BRAND NAME : BLUETTI MODEL NAME : AC200L APPLICANT : SHENZHEN POWEROAK NEWENER CO., LTD DATE OF ISSUE : Nov. 27, 2023 STANDARD(S) : FCC Part 2 Subpart J §2.1091 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC01741230905FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Nov. 27, 2023 Valid Initial Release Report No.: AGC01741230905FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Mobile Device Evaluation Method and Limit ................................................................................................ 9 6. Measurement Results ................................................................................................................................... 10 7. Measurement Evaluation .............................................................................................................................. 10 Report No.: AGC01741230905FH01 Page 4 of 10 1. General Information Applicant SHENZHEN POWEROAK NEWENER CO., LTD Address F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Manufacturer SHENZHEN POWEROAK NEWENER CO., LTD Address F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Factory Huizhou PowerOak Innovation Co., Ltd Address (No.1 Workshop)Longsheng 5th Road, Laoshe Village, Dayawan West Zone, Huizhou, Guangdong, China Product Designation Portable Power Station Brand Name BLUETTI Test Model AC200L Series Model(s) N/A Difference Description N/A Date of receipt of test item Oct. 09, 2023 Date of Test Oct. 09, 2023 –Nov. 27, 2023 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report Prepared By Alan Duan (Project Engineer) Nov. 27, 2023 Reviewed By Calvin Liu (Reviewer) Nov. 27, 2023 Approved By Max Zhang (Authorized Officer) Nov. 27, 2023 Report No.: AGC01741230905FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Bluetooth: 2.402GHz ~ 2.480GHz Other: Hardware Version V6.0 Software Version 2034 Modulation Type 2.4G WLAN: 802.11b:(DQPSK, DBPSK, CCK) DSSS 802.11g/n:(64-QAM,16-QAM, QPSK, BPSK) OFDM BT_BLE: GFSK BT_BR_EDR: GFSK, π /4-DQPSK, 8DPSK Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation PCB Antenna Antenna Gain BT: 3.42dBi 2.4G WIFI: 3.42dBi Minimum Assessment Distance 20cm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC01741230905FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC01741230905FH01 Pa…

Text truncated - open the document above for the full version.

Page 1 of 77 FCC Test Report Report No.: AGC01741230905FR02 FCC ID : 2AYT3-AC200L APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Portable Power Station BRAND NAME : BLUETTI MODEL NAME : AC200L APPLICANT : SHENZHEN POWEROAK NEWENER CO., LTD DATE OF ISSUE : Nov. 17, 2023 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC01741230905FR02 Page 2 of 77 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Nov. 17, 2023 Valid Initial Release Report No.: AGC01741230905FR02 Page 3 of 77 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 7 2.4 Test Methodology ...................................................................................................................................... 7 2.5 Receiver Input Bandwidth ......................................................................................................................... 7 2.6 Equally Average Use of Frequencies And Behaviour ............................................................................... 7 2.7 Pseudorandom Frequency Hopping Sequence ........................................................................................ 8 2.8 Special Accessories .................................................................................................................................. 9 2.9 Equipment Modifications ........................................................................................................................... 9 2.10 Antenna Requirement ............................................................................................................................. 9 3. Test Environment .......................................................................................................................................... 10 3.1 Address of The Test Laboratory .............................................................................................................. 10 3.2 Test Facility .............................................................................................................................................. 10 3.3 Environmental Conditions ....................................................................................................................... 11 3.4 Measurement Uncertainty ....................................................................................................................... 11 3.5 List of Equipment Used ........................................................................................................................... 12 4.System Test Configuration ............................................................................................................................ 14 4.1 EUT Configuration ................................................................................................................................... 14 4.2 EUT Exercise ........................................................................................................................................... 14 4.3 Configuration of Tested System .............................................................................................................. 14 4.4 Equipment Used In Tested System ........................................................................................................ 14 4.5 Summary of Test Results ........................................................................................................................ 14 5. Description of Test Modes ........................................................................................................................... 16 6. RF Output Power Measurement .................................................................................................................. 18 6.1 Provisions Applicable .............................................................................................................................. 18 6.2 Measurement Procedure ......................................................................................................................... 18 6.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 18 6.4 Measurement Result ............................................................................................................................... 19 7. 20db Bandwidth Measurement .................................................................................................................... 25 7.1 Provisions Applicable .............................................................................................................................. 25 7.2 Measurement Procedure ......................................................................................................................... 25 7.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 25 7.4 Measurement Results ............................................................................................................................. 26 8. Conducted Band Edge and Out-of-Band Emiss…

Text truncated - open the document above for the full version.

Report No.: AGC01741230905FR02 Page 71 of 77 12. Frequency Separation Measurement 12.1 Provisions Applicable When the power is less than 0.125W: The minimum permissible channel separation for this system is 2/3 the value of the 20dB BW. When the power is less than 1W: The minimum permissible channel separation for this system is 20dB BW. 12.2 Measurement Procedure The EUT shall have its hopping function enabled. Use the following spectrum analyzer settings: 1. Span: Wide enough to capture the peaks of two adjacent channels. 2. RBW: Start with the RBW set to approximately 30% of the channel spacing; adjust as necessary to best identify the center of each individual channel. 3. Video (or average) bandwidth (VBW) ≥ RBW. 4. Sweep: Auto. 5. Detector…

Text truncated - open the document above for the full version.