2AYT3-EB3A01Portable Power Station

2.911 (d)(7)USA Agent v1.5 Section 2.911(d)(7) USA Agent for Service of Process Company name: SHENZHEN POWEROAK NEWENER CO., LTD Address: F19, BLD No.1, Kaidaer Tongs ha Rd No.168, Xili Street, Nanshan, Shenzhen, China Product Name: Portable Power Station FCC ID: 2AYT3-EB3A01 Model(s): EB3A 2.911(d)(7) USA Designated Agent for Service of Process We, [SHENZHEN POWEROAK NEWENER CO., LTD] (“the applicant”) designate [BLUETTI POWEROAK INC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: BLUETTI POWEROAK INC USA Address: 6185 S VALLEY VIEW BLVD STE D LAS VEGAS NEVADA 89118 United States FRN Number: 0033559824 Contact Name: Qiyao Li Telephone No: +1-512-966-1898 1 Email: [email protected] Applicant Company name: SHENZHEN POWEROAK NEWENER CO., LTD Address: F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Grantee FRN Number: 0030496780 Contact Name: Cara Zou Telephone No: +86-752-5192099 Email: [email protected] 2.911 (d)(7)USA Agent v1.5 Signature: Title: CEO Signature: Title: Manager Date: 2024-01-15 Date: 2024-01-15 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against- national-security-threats-to-the-communications-supply-chain-through-the

SHENZHEN POWEROAK NEWENER CO., LTD F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Mar. 06, 2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AYT3-EB3A01 Product Name: Portable Power Station Model Name: EB3A FRN Number: 0030496780 [SHENZHEN POWEROAK NEWENER CO., LTD] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Cara Zou)

SHENZHEN POWEROAK NEWENER CO., LTD F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Mar. 06, 2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AYT3-EB3A01 Product Name: Portable Power Station Model Name: EB3A FRN Number: 0030496780 [SHENZHEN POWEROAK NEWENER CO., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Cara Zou)

SHENZHEN POWEROAK NEWENER CO., LTD F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Declaration Letter FCC ID: 2AYT3-EB3A01 Pursuant to KDB 680106 of the SHENZHEN POWEROAK NEWENER CO., LTD Hereby declare our product which is an inductive wireless power transfer applications that meet all of the following requirements are not required to submit a KDB inquiry for devices approved using a PAG for equipment approved using certification to address RF exposure compliance. The EUT does comply with item 5.2 of KDB 680106 D01v04 as follows table: Requirements of KDB 680106 Description (1) The power transfer frequency is below 1MHz. The device operate in the frequency range 110.5KHz-205KHz. (2) The output power from each transmitting element (e.g., coil) is less than or equal to 15 watts. The maximum output power of the primary coil is 15W. (3) A client device providing the maximum permitted load is placed in physical contact with the transmitter (i.e., the surfaces of the transmitter and client device enclosures need to be in physical contact) Client device is placed directly in contact with the transmitter. (4) Only $2.1091-Mobile exposure conditions apply (i.e., this provision does not cover $ 2.1093-Portable exposure conditions). Device can be used in Mobile conditions. (5) The E-field and H-field strengths, at and beyond 20 cm surrounding the device surface, are demonstrated to be less than 50% of the applicable MPE limit, per KDB 447498, Table 1. These measurements shall be taken along the principal axes of the device, with one axis oriented along the direction of the estimated maximum field strength, and for three points per axis or until a l/d (inverse distance from the emitter structure) field strength decay is observed. Symmetry considerations may be used for test reduction purposes. The device shall be operated in documented worst-case compliance scenarios (i.e., the ones that lead to the maximum field components), and while all the radiating structures (e.g., coils or antennas) that by design can simultaneously transmit are energized at their nominal maximum power. The EUT H-field strengths at 20cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. (6) For systems with more than one radiating structure, the conditions specified in (5) must be met when the system is fully loaded (i.e., clients absorbing maximum power available), and with all the radiating structures operating at maximum power at the same time, as per design conditions. If the design allows one or more radiating structures to be powered at a higher level while other radiating structures are not powered, then those cases must be tested as well. For instance, a device may use three RF coils powered at 5 W, or one coil powered at 15 W: in this case, both scenarios shall be tested. The transfer system includes single coil that is able to detect receiver device. Yours sincerely, SHENZHEN POWEROAK NEWENER CO., LTD F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Name: Cara Zou Title: Manager Date: Mar. 06, 2024

C5266091_X8_Ed.1 1/1 Letter of Authorization SHENZHEN POWEROAK NEWENER CO., LTD F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Company: SHENZHEN POWEROAK NEWENER CO., LTD Address: F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Product Name: Portable Power Station Model Number: EB3A FCC Identifier: 2AYT3-EB3A01 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Cara Zou Date: Mar. 06, 2024 Title: Manager Signature of applicant:

SHENZHEN POWEROAK NEWENER CO., LTD F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Mar. 06, 2024 Subject; Request for Confidentiality FCC ID: 2AYT3-EB3A01 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List Antenna Specification FCC_Confidential Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Cara Zou Title: Manager

深圳市德兰明海科技有限公司 Shenzhen PowerOak Newener Co.,ltd 24.03.15 A1 A2 PPS004-6e01A4 17.0301.1033-04 EB3A size: 99.5X49.5mm + 0/-0.3mm +0/-0.3mm SHENZHEN POWEROAK NEWENER CO.,LTD 22.01.12 22.02.23 22.04.08 22.05.26 24.03.15 A3 A4 A5 A6 Output: AC × 2: 120V 50/60Hz, 600W Total USB-A × 2: 5V 3A Total USB-C × 1: 5/9/12/15/20V 3A; 20V 5A (E-Marker chip built-in) DC 5521 × 2: 12V 10A Total Cigarette Lighter × 1: 12V 10A (DC 5521 and Cigarette Lighter 10A Total) Wireless Charge × 1: 5W/7.5W/10W/15W AC and DC output : 600W Total Portable Power Station Model No.: EB3A Battery Capacity: 268.8Wh, 22.4V 12Ah Input: AC: 120V 50/60Hz, 9A MAX DC: 12-28V 8.5A, 200W MAX Discharge Temperature: -20 o C-40 o C Charging Temperature: 0 o C-40 o C Working Humidity: 10%-90% 99.5mm 5 R3mm 49.5mm MADE IN CHINAP/N:17.0301.1033-04A4 FCC ID: 2AYT3-EB3A01IC: 29079-EB3A01 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-003 (B) / NMB-003 (B)

Page 1 of 10 RF Exposure Report Report No.: AGC01741231203FH02 FCC ID : 2AYT3-EB3A01 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Portable Power Station BRAND NAME : BLUETTI MODEL NAME : EB3A APPLICANT : SHENZHEN POWEROAK NEWENER CO., LTD DATE OF ISSUE : Mar. 05, 2024 STANDARD(S) : FCC Part 2 Subpart J §2.1091 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC01741231203FH02 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Mar. 05, 2024 Valid Initial Release Report No.: AGC01741231203FH02 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Mobile Device Evaluation Method and Limit ................................................................................................ 9 6. Measurement Results ................................................................................................................................... 10 7. Measurement Evaluation .............................................................................................................................. 10 Report No.: AGC01741231203FH02 Page 4 of 10 1. General Information Applicant SHENZHEN POWEROAK NEWENER CO., LTD Address F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Manufacturer SHENZHEN POWEROAK NEWENER CO., LTD Address F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Factory Huizhou PowerOak Innovation Co.,Ltd Address (No.1 Workshop)Longsheng 5th Road, Laoshe Village, Dayawan West Zone, Huizhou, Guangdong, China Product Designation Portable Power Station Brand Name BLUETTI Test Model EB3A Series Model(s) N/A Difference Description N/A Date of receipt of test item Dec. 22, 2023 Date of Test Dec. 22, 2023 – Mar. 01, 2024 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report Prepared By Alan Duan (Project Engineer) Mar. 05, 2024 Reviewed By Calvin Liu (Reviewer) Mar. 05, 2024 Approved By Max Zhang (Authorized Officer) Mar. 05, 2024 Report No.: AGC01741231203FH02 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Bluetooth: 2.402GHz ~ 2.480GHz Other: Hardware Version EB3A_U3 V6.0 Software Version 25.0301.2114-01 Modulation Type BT_BLE: GFSK WPT:ASK Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation BT: PCB Antenna Antenna Gain BT: -2.31dBi Minimum Assessment Distance 20cm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC01741231203FH02 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC01741231203FH02 Page 7 of 10 3.3 Environmental Conditions NORMAL CONDITIONS Temperature range (°C) 15 - 35 Relative humidity range …

Text truncated - open the document above for the full version.

Page 1 of 18 Test Report Verified code: Report No.: E20230306359801-1-G1 Customer: Guangdong Bestcore Internet of Things Technology CO., Ltd. Address: Room1501,15F,ShuMao Building,6 Xiangxing Road, Torch Development District,Zhong shan Sample Name: LE ANT A Sample Model: LE ANT A Receive Sample Date: Mar.07,2023 Test Date: Mar.07,2023 ~ Mar.07,2023 Reference Document: ANSI IEEE 149-2021 Part 7, Part 8, Part 10 Test Result: Not make judgment Prepared by: Reviewed by: Approved by: GRG METROLOGY & TEST GROUP CO., LTD. Issued Date: GRG METROLOGY & TEST GROUP CO., LTD. Address: No.163,Pingyun Road, West of Huangpu Avenue, Guangzhou, Guangdong, China Tel：（+86）400-602-0999 FAX：（+86）020-38698685 Web：http://www.grgtest.com 348480 2023-03-17 Report No.: E20230306359801-1-G1 Page 2 of 18 Statement 1. The report is invalid without "special seal for inspection and testing"; some copies are invalid; The report is invalid if it is altered or missing; The report is invalid without the signature of the person who prepared, reviewed and approved it. 2. The sample information is provided by the client and responsible for its authenticity; The content of the report is only valid for the samples sent this time. 3. When there are reports in both Chinese and English, the Chinese version will prevail when the language problems are inconsistent. 4. If there is any objection concerning the report, please inform us within 15 days from the date of receiving the report. 5. Without the agreement of the laboratory, the client is not authorized to use the test results for unapproved propaganda. ------------ The following blanks ------------ Report No.: E20230306359801-1-G1 Page 3 of 18 TABLE OF CONTENTS 1. TEST RESULT SUMMARY ...................................................................................................................... 5 2. GENERAL DESCRIPTION OF EUT ......................................................................................................... 6 2.1 APPLICANT INFORMATION ...................................................................................................................... 6 2.2 MANUFACTURER ........................................................................................................................................ 6 2.3 FACTORY ...................................................................................................................................................... 6 2.4 BASIC DESCRIPTION OF EUT ................................................................................................................... 6 2.5 TEST SCENE .................................................................................................................................................. 6 2.6 SAMPLE WORK DESCRIPTION ................................................................................................................. 6 2.7 ASSISTIVE DEVICE INFORMATION......................................................................................................... 7 2.8 SAMPLE CONNECTION DIAGRAM .......................................................................................................... 7 3. LABORATORY .......................................................................................................................................... 8 4. MEASUREMENT UNCERTAINTY .......................................................................................................... 9 5. EQUIPMENT AND TOOLS USED DURING TEST .............................................................................. 10 6. ANTENNA RADIATION PERFORMANCE MEASUREMENT ........................................................... 11 6.1 LIMITS ......................................................................................................................................................... 11 6.2 TEST PROCEDURE ..................................................................................................................................... 11 6.3 CONFIGURATION OF SYSTEM UNDER TEST ...................................................................................... 12 6.4 TEST PHOTOS ............................................................................................................................................. 12 6.5 TEST RESULTS ........................................................................................................................................... 13 7. PHOTOGRAPH OF THE EUT ................................................................................................................. 17 ------------ The following blanks ------------ Report No.: E20230306359801-1-G1 Page 4 of 18 REPORT ISSUED HISTORY Report Version Report No. Description Compile Date 1.0 E20230306359801-1 Original Issue 2023-03-07 2.0 E20230306359801-1-G1 Update 2023-03-17 Note 1: This report E20230306359801-1-G1 is the modification of report E20230306359801-1. On the basis of the original report, Update Product Name Bluetooth Module to LE ANT A, Product Model BC204 to LE ANT A on page 1,6,13 of the report, and add Product Size: Antenna Size: 8.5mm*5.51mm*0.03mm, add Antenna Type: PCB Antenna, add Software Version: /, Hardware Version: /, add Manufacturer: Guangdong Bestcore Internet of Things Technology CO., Ltd. on page 6 of the report, and the original report E20230306359801-1 is invalid. ------------ The following blanks ------------ Report No.: E20230306359801-1-G1 Page 5 of 18 1. TEST RESULT SUMMARY Test Item Test Frequency Test Method Test Scene Test Result Gain 2400 MHz ~2500MHz ANSI IEEE 149-2021 Part 8 scene 1 / 1) Radiation efficiency 2400 MHz ~2500MHz ANSI IEEE 149-2021 Part 10 scene 1 / 1) Radiation pattern 2400 MHz ~2500MHz ANSI IEEE 149-2021 Part 7 scene 1 / 1) Note 1)：Customer-defined test, test results do not make judgment. ------------ The following blanks ------------ . Report No.: E20230306359801-1-G1 Page 6 of 18 2. GENERAL DESCRIPTION OF EUT 2.1 APPLI…

Text truncated - open the document above for the full version.

Page 1 of 71 FCC Test Report Report No.: AGC01741231203FR01 FCC ID : 2AYT3-EB3A01 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Portable Power Station BRAND NAME : BLUETTI MODEL NAME : EB3A APPLICANT : SHENZHEN POWEROAK NEWENER CO., LTD DATE OF ISSUE : Mar. 05, 2024 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation Of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC01741231203FR01 Page 2 of 71 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Mar. 05, 2024 Valid Initial Release Report No.: AGC01741231203FR01 Page 3 of 71 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ..................................................................................................................... 6 2.2 Test Frequency List ..................................................................................................................................... 7 2.3 Related Submittal(S) / Grant (S) ................................................................................................................. 8 2.4 Test Methodology......................................................................................................................................... 8 2.5 Special Accessories ..................................................................................................................................... 8 2.6 Equipment Modifications ............................................................................................................................. 8 2.7 Antenna Requirement .................................................................................................................................. 8 3. Test Environment ............................................................................................................................................ 9 3.1 Address of the Test Laboratory .................................................................................................................... 9 3.2 Test Facility .................................................................................................................................................. 9 3.3 Environmental Conditions ......................................................................................................................... 10 3.4 Measurement Uncertainty ......................................................................................................................... 10 3.5 List of Equipment Use ............................................................................................................................... 11 4.System Test Configuration ............................................................................................................................ 13 4.1 EUT Configuration ..................................................................................................................................... 13 4.2 EUT Exercise ............................................................................................................................................. 13 4.3 Configuration of Tested System ................................................................................................................ 13 4.4 Equipment Used In Tested System ........................................................................................................... 13 4.5 Summary of Test Results ........................................................................................................................... 14 5. Description of Test Modes ........................................................................................................................... 15 6. Duty Cycle Measurement ............................................................................................................................. 16 7. RF Output Power Measurement .................................................................................................................. 17 7.1 Provisions Applicable ................................................................................................................................. 17 7.2 Measurement Procedure ........................................................................................................................... 17 7.3 Measurement Setup (Block Diagram of Configuration) ............................................................................ 17 7.4 Measurement Result ................................................................................................................................. 18 8. 6dB Bandwidth Measurement ...................................................................................................................... 22 8.1 Provisions Applicable ................................................................................................................................. 22 8.2 Measurement Procedure ........................................................................................................................... 22 8.3 Measurement Setup (Block Diagram of Configuration) ............................................................................ 22 8.4 Measurement Results ................................................................................................................................ 23 9. Power Spectral Density Measurement ........................................................................................................ 27 9.1 Provisions Applicable .............................................................................…

Text truncated - open the document above for the full version.