2AYT3-AC200PLPortable Power Station

SHENZHEN POWEROAK NEWENER CO., LTD F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-05-2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AYT3-AC200PL Product Name: Portable Power Station Model Name: AC200P L [SHENZHEN POWEROAK NEWENER CO., LTD] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Cara Zou)

SHENZHEN POWEROAK NEWENER CO., LTD F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-05-2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AYT3-AC200PL Product Name: Portable Power Station Model Name: AC200P L [SHENZHEN POWEROAK NEWENER CO., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Cara Zou)

2.911 (d)(7)USA Agent v1.5 Section 2.911(d)(7) USA Agent for Service of Process Company name: SHENZHEN POWEROAK NEWENER CO., LTD Address: F19, BLD No.1, Kaidaer Tongs ha Rd No.168, Xili Street, Nanshan, Shenzhen, China Product Name: Portable Power Station FCC ID: 2AYT3-AC200PL Model(s): AC200P L 2.911(d)(7) USA Designated Agent for Service of Process We, [SHENZHEN POWEROAK NEWENER CO., LTD] (“the applicant”) designate [BLUETTI POWEROAK INC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: BLUETTI POWEROAK INC USA Address: 6185 S VALLEY VIEW BLVD STE D LAS VEGAS NEVADA 89118 United States FRN Number: 0033559824 Contact Name: Qiyao Li Telephone No: +1-512-966-1898 1 Email: [email protected] Applicant Company name: SHENZHEN POWEROAK NEWENER CO., LTD Address: F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Grantee FRN Number: 0030496780 Contact Name: Cara Zou Telephone No: +86-752-5192099 Email: [email protected] 2.911 (d)(7)USA Agent v1.5 Signature: Title: CEO Signature: Title: Manager Date: 2024-01-31 Date: 2024-01-31 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against- national-security-threats-to-the-communications-supply-chain-through-the

Letter of Authorization Company: SHENZHEN POWEROAK NEWENER CO., LTD Address: F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Product Name: Portable Power Station Model Number(s): AC200P L Product Description: Portable Power Station We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Mar. 01, 2024 Name: Cara Zou Title: Manager Company: SHENZHEN POWEROAK NEWENER CO., LTD

SHENZHEN POWEROAK NEWENER CO., LTD F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Mar. 05, 2024 Subject; Request for Confidentiality FCC ID: 2AYT3-AC200PL To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List Antenna Specification FCC_Confidential Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Cara Zou Title: Manager

AC200P L PPS011-6E06A1 17.0301.1346-01 23.10.21 279.6mm 7mm 119.6mm R8mm P/N: 17.0301.1346-01A1MADE IN CHINA FCC ID: 2AYT3-AC200PLIC: 29079-AC200PL Input: AC: 120V 50/60Hz, 20A Max. DC: 12V-30V 8A PV: 12V-145V 15A Max. Battery Expansion: 51.2V 60A Max. Discharging Temperature: -20°C-40°C/-4°F-104°F Charging Temperature: 0°C-40°C/32°F-104°F Working Humidity: 10%-90% AC: 120V 50/60Hz, 2400W Max. Aviation Sockets: 48V 8A USB-A: 5V 3A, 9V 2A, 12V 1.5A, 18W Each USB-C: 5/9/12/15/20V 3A, 20V 5A (100W for one, 150W for two) Cigarette Lighter Port: 12V 10A Wireless Charging: 5/7.5/10/15W AC and DC Output: 2500W Total Battery Expansion: 51.2V 60A Max. Portable Power Station Output: Model: AC200P LBattery Capacity: 2304Wh, 51.2V 45Ah SHENZHEN POWEROAK NEWENER CO., LTD. Address: F19, BLD No.1, Kaidaer, Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China CAUTION • Risk of Electric Shock. Do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel. • Risk of Electric Shock. Connect only to properly grounded outlets. • Risk of Injury To Persons. Do not use this product if the power cord or the battery cables are damaged in any way. • Risk of Electric Shock. Never use portable power pack to supply power tools to cut or access live parts or live wirings. • This device is not intended for use in a commercial repair facility. MISE EN GARDE • Risque de décharge électrique.Ne pas enlever le couvercle. Aucune des pièces à l'intérieur ne peut être réparée par l'utilisateur. L'entretien courant doit être effectué par un personnel d'entretien qualifié. • Risque de décharge électrique.Brancher l'unité uniquement à des prises de courant correctement mises à la masse. • Risque de blessure aux personnes. Ne pas utiliser ce produit si le cordon d'alimentation ou les câbles de batterie sont endommagés de quelque façon. • Risque de décharge électrique. N’utilisez jamais de bloc d’alimentation portable pour fournir des outils électriques pour couper ou accéder à des pièces sous tension ou à des câblages endirect. • Le dispositif n'est pas destiné à être utilisé dans un atelier de réparation commercial. DANGER • Pour éviter tout contact avec des liquides, n'utilisez pas ce produit sous la pluie. DANGER • To avoid contact with any liquids, do not use this product in the rain. C AN ICES-003 (B) / NMB-003 (B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CONFORMS TO ANSI/CAN/UL STD.2743 size：279.6*119.6mm

Page 1 of 10 RF Exposure Report Report No.: AGC01741231101FH02 FCC ID : 2AYT3-AC200PL APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Portable Power Station BRAND NAME : BLUETTI MODEL NAME : AC200P L APPLICANT : SHENZHEN POWEROAK NEWENER CO., LTD DATE OF ISSUE : Mar. 04, 2024 STANDARD(S) : FCC Part 2 Subpart J §2.1091 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC01741231101FH02 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Mar. 04, 2024 Valid Initial Release Report No.: AGC01741231101FH02 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Mobile Device Evaluation Method and Limit ................................................................................................ 9 6. Measurement Results ................................................................................................................................... 10 7. Measurement Evaluation .............................................................................................................................. 10 Report No.: AGC01741231101FH02 Page 4 of 10 1. General Information Applicant SHENZHEN POWEROAK NEWENER CO., LTD Address F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Manufacturer SHENZHEN POWEROAK NEWENER CO., LTD Address F19, BLD No.1, Kaidaer Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China Factory Huizhou PowerOak Innovation Co.,Ltd Address (No.1 Workshop)Longsheng 5th Road, Laoshe Village, Dayawan West Zone, Huizhou, Guangdong, China Product Designation Portable Power Station Brand Name BLUETTI Test Model AC200P L Series Model(s) N/A Difference Description N/A Date of receipt of test item Jan. 02, 2024 Date of Test Jan. 02, 2024 – Mar. 01, 2024 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report Prepared By Alan Duan (Project Engineer) Mar. 04, 2024 Reviewed By Calvin Liu (Reviewer) Mar. 04, 2024 Approved By Max Zhang (Authorized Officer) Mar. 04, 2024 Report No.: AGC01741231101FH02 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Bluetooth: 2.402GHz ~ 2.480GHz Other: (WPT: 110.5KHz-205KHz) Hardware Version V6.0 Software Version 2034 Modulation Type 2.4G WLAN: 802.11b:(DQPSK, DBPSK, CCK) DSSS 802.11g/n:(64-QAM,16-QAM, QPSK, BPSK) OFDM BT_BLE: GFSK BT_BR_EDR: GFSK, π /4-DQPSK, 8DPSK WPT:ASK Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation BT: PCB Antenna 2.4G WIFI: PCB Antenna WPT: Coil Antenna Antenna Gain BT: 3.42dBi 2.4G WIFI: 3.42dBi WPT: 0dBi Minimum Assessment Distance 20cm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC01741231101FH02 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from t…

Text truncated - open the document above for the full version.

Page 1 of 77 FCC Test Report Report No.: AGC01741231101FR02 FCC ID : 2AYT3-AC200PL APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Portable Power Station BRAND NAME : BLUETTI MODEL NAME : AC200P L APPLICANT : SHENZHEN POWEROAK NEWENER CO., LTD DATE OF ISSUE : Mar. 01, 2024 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC01741231101FR02 Page 2 of 77 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Mar. 01, 2024 Valid Initial Release Report No.: AGC01741231101FR02 Page 3 of 77 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 7 2.4 Test Methodology ...................................................................................................................................... 7 2.5 Receiver Input Bandwidth ......................................................................................................................... 7 2.6 Equally Average Use of Frequencies And Behaviour ............................................................................... 7 2.7 Pseudorandom Frequency Hopping Sequence ........................................................................................ 8 2.8 Special Accessories .................................................................................................................................. 9 2.9 Equipment Modifications ........................................................................................................................... 9 2.10 Antenna Requirement ............................................................................................................................. 9 3. Test Environment .......................................................................................................................................... 10 3.1 Address of The Test Laboratory .............................................................................................................. 10 3.2 Test Facility .............................................................................................................................................. 10 3.3 Environmental Conditions ....................................................................................................................... 11 3.4 Measurement Uncertainty ....................................................................................................................... 11 3.5 List of Equipment Used ........................................................................................................................... 12 4.System Test Configuration ............................................................................................................................ 14 4.1 EUT Configuration ................................................................................................................................... 14 4.2 EUT Exercise ........................................................................................................................................... 14 4.3 Configuration of Tested System .............................................................................................................. 14 4.4 Equipment Used In Tested System ........................................................................................................ 14 4.5 Summary of Test Results ........................................................................................................................ 14 5. Description of Test Modes ........................................................................................................................... 16 6. RF Output Power Measurement .................................................................................................................. 18 6.1 Provisions Applicable .............................................................................................................................. 18 6.2 Measurement Procedure ......................................................................................................................... 18 6.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 18 6.4 Measurement Result ............................................................................................................................... 19 7. 20db Bandwidth Measurement .................................................................................................................... 20 7.1 Provisions Applicable .............................................................................................................................. 25 7.2 Measurement Procedure ......................................................................................................................... 25 7.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 25 7.4 Measurement Results ............................................................................................................................. 26 8. Conducted Band Edge and Out-of-Band Em…

Text truncated - open the document above for the full version.

Report No.: AGC01741231101FR02 Page 71 of 77 12. Frequency Separation Measurement 12.1 Provisions Applicable When the power is less than 0.125W: The minimum permissible channel separation for this system is 2/3 the value of the 20dB BW. When the power is less than 1W: The minimum permissible channel separation for this system is 20dB BW. 12.2 Measurement Procedure The EUT shall have its hopping function enabled. Use the following spectrum analyzer settings: 1. Span: Wide enough to capture the peaks of two adjacent channels. 2. RBW: Start with the RBW set to approximately 30% of the channel spacing; adjust as necessary to best identify the center of each individual channel. 3. Video (or average) bandwidth (VBW) ≥ RBW. 4. Sweep: Auto. 5. Detector function: Peak. 6. Trace: Max hold. g) Allow the trace to stabilize. 7. Use the marker-delta function to determine the separation between the peaks of the adjacent channels. 12.3 Measurement Setup (Block Diagram of Configuration) 12.4 Measurement Result Test Data of Frequency Separation Test Mode Channel Separation (MHz) Limits(MHz) Pass or Fail 8DPSK Hopping 1.073 >=0.869 Pass Report No.: AGC01741231101FR02 Page 72 of 77 Test Graphs of Number of Hopping Frequency Test_Graph_BR_HOP_ANT1_NA_1Mbps_Hopping Separation Note: All mode rates are tested and evaluated, 8DPSK modulated 3DH5 mode is the worst case and documented in the report. Report No.: AGC01741231101FR02 Page 73 of 77 13. AC Power Line Conducted Emission Test 13.1 Measurement Limits Frequency Maximum RF Line Voltage Q.P. (dBμV) Average (dBμV) 150kHz~500kHz 66-56 56-46 500kHz~5MHz 56 46 5MHz~30MHz 60 50 Note: 1. The lower limit shall apply at the transition frequency. 2. The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.50 MHz. 13.2 Measurement Setup (Block Diagram of Configuration) Report No.: AGC01741231101FR02 Page 74 of 77 13.3 Preliminary Procedure of Line Conducted Emission Test 1. The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. When the EUT is a tabletop system, a wooden table with a height of 0.8 meters is used and is placed on the ground plane as per ANSI C63.10 (see Test Facility for the dimensions of the ground plane used). When the EUT is a floor-standing equipment, it is placed on the ground plane which has a 3-12 mm non-conductive covering to insulate the EUT from the ground plane. 2. Support equipment, if needed, was placed as per ANSI C63.10. 3. All I/O cables were positioned to simulate typical actual usage as per ANSI C63.10. 4. All support equipment received AC120V/60Hz power from a LISN, if any. 5. The EUT received DC 5V power from adapter which received AC120V/60Hz power from a LISN. 6. The test program was started. Emissions were measured on each current carrying line of the EUT using a spectrum Analyzer / Receiver connected to the LISN powering the EUT. The LISN has two monitoring points: Line 1 (Hot Side) and Line 2 (Neutral Side). Two scans were taken: one with Line 1 connected to Analyzer / Receiver and Line 2 connected to a 50 ohm load; the second scan had Line 1 connected to a 50 ohm load and Line 2 connected to the Analyzer / Receiver. 7. Analyzer / Receiver scanned from 150 kHz to 30MHz for emissions in each of the test modes. 8. During the above scans, the emissions were maximized by cable manipulation. 9. The test mode(s) were scanned during the preliminary test. Then, the EUT configuration and cable configuration of the above highest emission level were recorded for reference of final testing. 13.4 Final Procedure of Line Conducted Emission Test 1. EUT and support equipment was set up on the test bench as per step 2 of the preliminary test. 2. A scan was taken on both power lines, Line 1 and Line 2, recording at least the six highest emissions. Emission frequency and amplitude were recorded into a computer in which correction factors were used to calculate the emission level and compare reading to the applicable limit. If EUT emission level was less – 2dB to the A.V. limit in Peak mode, then the emission signal was re-checked using Q.P and Average detector. 3. The test data of the worst case condition(s) was reported on the Summary Data page. 13.5 Measurement Results Report No.: AGC01741231101FR02 Page 75 of 77 AC Power Line Conducted Emission Test Test Mode Mode 1 LISN line Hot Side Report No.: AGC01741231101FR02 Page 76 of 77 AC Power Line Conducted Emission Test Test Mode Mode 1 LISN line Neutral Side Report No.: AGC01741231101FR02 Page 77 of 77 Appendix I: Photographs of Test Setup Refer to the Report No.: AGC01741231101AP02 Appendix II: Photographs of Test EUT Refer to the Report No.: AGC01741231101AP03 -----End of Report----- Conditions of Issuance of Test Reports 1. All samples and goods are accepted by the Attestation of Global Compliance (Shenzhen) Co., Ltd (the “Company”) solely for testing and reporting in accordance with the following terms and conditions. The company provides its services on the basis that such terms and conditions constitute express agreement between the company and any person, firm or company requesting its services (the “Clients”). 2. Any report issued by Company as a result of this application for testing services (the “Report”) shall be issued in confidence to the Clients and the Report will be strictly treated as such by the Company. It may not be reproduced either in its entirety or in part and it may not be used for advertising or other unauthorized purposes without the written consent of the Company. The Clients to whom the Report is issued may, however, show or send it, or a certified copy thereof prepared by the Company to its customer, supplier or other persons directly concerned. The Company will not, without the consent of the Clients, enter into any discussion or correspondence with any third party concerning the contents of the Report, unless required by the relevant governmental authorities, laws or court or…

Text truncated - open the document above for the full version.

Prepared by: Xu Ying Approved by: Xu Kai TA Technology (Shanghai) Co., Ltd. Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 OTA TEST REPORT TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in ANSI/IEEE Std 149-2021. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Applicant Espressif Systems Product ESP ANT B Model ESP ANT B Report No. Y2302A0204-T1 Issue Date March 22, 2023 OTA Test Report Report No: Y2302A0204-T1 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 2 of 19 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENTS 1. Test Laboratory .............................................................................................................................. 3 1.1. Notes of the Test Report ................................................................................................... 3 1.2. Test Facility ....................................................................................................................... 3 1.3. Testing Location ................................................................................................................ 3 1.4. Laboratory Environment .................................................................................................... 3 2. General Description of Equipment Under Test .............................................................................. 4 2.1. Applicant and Manufacturer Information ............................................................................ 4 2.2. General Information ........................................................................................................... 4 2.3. Test Date ........................................................................................................................... 4 2.4. Received Date ................................................................................................................... 4 2.5. Applied Standards ............................................................................................................. 5 3. Test Conditions .............................................................................................................................. 6 3.1. Test Configuration ............................................................................................................. 6 3.2. Test Measurement ............................................................................................................. 6 4. Test R…

Text truncated - open the document above for the full version.