2AZMH-FQ10148Vertical Blinds Motor

FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the follow ing two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, inc luding interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentia l installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televis ion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technic ian for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be insta lled and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: ALLOY MOVE INC FRN: 0033436965 Contact Name: Mr Tim Wu Address: 3 E EVERGREEN RD #312 NEW CITY NEW YORK 10956 United States Telephone No: 8452937218 Email: [email protected] Applicant: Company name: NOVO (GUANGDONG) HIGH-TECH CO., LTD. Contact Name: LIU SHUN Address: No.7-1, Jiye Road, Leping Town, Sanshui District, Foshan City Telephone No.: 86-15817285228 Email: [email protected] FRN: 0030811459 FCC ID: 2AZMH-FQ10148 [NOVO (GUANGDONG) HIGH-TECH CO.LTD] certifies that, as of the date of this filing of the application with the TCB, [ALLOY MOVE INC ] is our designated US agent for service of process for the above referenced FCC ID. [NOVO (GUANGDONG) HIGH-TECH CO.LTD ] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [ALLOY MOVE INC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2026.9.04 Applicant’s Name: LIU SHUN US Agent’s Name: MrTimWu Title:Manager Title: Manager Signature Signature

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: NOVO (GUANGDONG) HIGH-TECH CO.LTD Grantee code: 2AZMH FRN: 0030811459 FCC ID: 2AZMH-FQ10148 Contact Name: LIU SHUN Address: No.7-1, Jiye Road, Leping Town, Sanshui District, Foshan City Telephone No: 86-15817285228 Fax No: / Email: [email protected] i. [NOVO (GUANGDONG) HIGH-TECH CO.LTD] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [NOVO (GUANGDONG) HIGH-TECH CO.LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [NOVO (GUANGDONG) HIGH-TECH CO.LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment. Date: 2026/9/8 Applicant’s Name: NOVO (GUANGDONG) HIGH-TECH CO.LTD Title: Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

NOVO (GUANGDONG) HIGH-TECH CO.LTD. Code 00018768 Ed. 2 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A Device Vertical Blinds Motor Company name NOVO (GUANGDONG) HIGH-TECH CO.LTD Grantee code 2AZMH FCC ID 2AZMH-FQ10148 FRN 0030811459 Contact name LIU SHUN Address No.7-1, Jiye Road, Leping Town, Sanshui District, Foshan City Telephone number 86-15817285228 E-mail [email protected] Chipset/module information ZIGBEE module: ZT3L Operating System (if applicable) / Storage Capacity (hard drive or other permanent memory storage, if applicable) / 2 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. 3 ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: LIU SHUN Date: 2026/9/8 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications.

NOVO (GUANGDONG) HIGH-TECH CO.LTD. Model Difference 2026/9/8 EUT NAME: Vertical Blinds Motor Trademark: N/A MODEL: FQ10148, Q10148, AG148, AT148, FD148, ACQ10148 FCC ID: 2AZMH-FQ10148 We (NOVO (GUANGDONG) HIGH-TECH CO.LTD.) Hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model names. The test model is FQ10148. Regards Sincerely Client’s signature: Client’s name / title : LIU SHUN / Manager Contact information / address: No.7-1, Jiye Road, Leping Town, Sanshui District, Foshan City

TCB CALL página 1 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, File FCC ID: 2AZMH-FQ10148 Please upload an exhibit that explains how does the TCB verify the new agent information: etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. On the official register from : https://apps.dos.ny.gov/publicInquiry/EntityDisplay In google: TCB CALL página 2 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed1_US_Agent_Letter" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "C5266091_X23_Ed1_US_Agent_Letter" >

C5266091_X10_Ed.2 1/1 NOVO (GUANGDONG) HIGH-TECH CO.LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2026/9/8 Subject: Request for Confidentiality FCC ID: 2AZMH-FQ10148 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: LIU SHUN Title: Manager

C5266091_X8_Ed.1 1/1 Letter of Authorization NOVO (GUANGDONG) HIGH-TECH CO.LTD. Company: NOVO (GUANGDONG) HIGH-TECH CO.LTD Address: No.7-1, Jiye Road, Leping Town, Sanshui District, Foshan City Product Name: Vertical Blinds Motor Model Number: FQ10148, Q10148, AG148, AT148, FD148, ACQ10148 FCC Identifier: 2AZMH-FQ10148 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: LIU SHUN Date: 2026/9/8 Title: Manager Signature of applicant:

Report No.: BCTC2606241538E External Photos Report No.: BCTC2606241538E Report No.: BCTC2606241538E

Size:17*1mm FCC ID: 2AZMH-FQ10148 Label location

Report No.: BCTC2606241538E Internal Photos Report No.: BCTC2606241538E Report No.: BCTC2606241538E Report No.: BCTC2606241538E 433 Reception Antenna Report No.: BCTC2606241538E ZIGBEE Antenna

FCC §15.247 (i), §2.1091 – RF Exposure FCC ID: 2AZMH-FQ10148 Applied procedures / limit According to FCC §15.247(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Note: ƒ is frequency in MHz * = Power density limit is applicable at frequencies greater than 100 MHz Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz * = Plane-wave equivalent power density MPE PREDICTION Predication of MPE limit at a given distance, Equation from OET Bulletin 65, Edition 97-01 Where: S = power density P = power input to antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna, R=0.2m TEST RESULTS Tune up Produce power Maximum peak output power (dBm) Output power to antenna (mW) Antenna Gain (numeric) Power Density (S) (mW/ cm2) Limit (mW / cm2 ) Result ZIGBEE 1+1 2 1.58 1.144(0.58dBi) 0.00036 1 Pass

No.：BCTC/KJ-RF-ICT-001 Page 1 of 45 Edition：B.1 TEST REPORT Shenzhen BCTC Technology Co., Ltd. Report No.: BCTC2607640390E Applicant: NOVO (GUANGDONG) HIGH-TECH CO.LTD Product Name: Vertical Blinds Motor Test Model: FQ10148 Tested Date: 2026-07-16 to 2026-08-11 Issued Date: 2026-08-11 Report No.: BCTC2607640390E No.：BCTC/KJ-RF-ICT-001 Page 2 of 45 Edition：B.1 FCC ID: 2AZMH-FQ10148 The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Technology Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: Vertical Blinds Motor Trademark: N/A Model/Type Ref.: FQ10148 Q10148, AG148, AT148, FD148, ACQ10148 Prepared For: NOVO (GUANGDONG) HIGH-TECH CO.LTD Address: No.7-1, Jiye Road, Leping Town, Sanshui District, Foshan City Manufacturer: NOVO (GUANGDONG) HIGH-TECH CO.LTD Address: No.7-1, Jiye Road, Leping Town, Sanshui District, Foshan City Prepared By: Shenzhen BCTC Technology Co., Ltd. Address: Room 101M, Unit 1, Building1, Pengyuan, No.18, Lilang Road, Shanglilang, Nanwan Subdistrict, Longgang District, Shenzhen, Guangdong, China Sample Received Date: 2026-07-16 Sample tested Date: 2026-07-16 to 2026-08-11 Report No.: BCTC2607640390E Test Standards: 47 CFR Part 15 Subpart C (clause 15.247) ANSI C63.10-2020 + Cor.1-2023+C63.10a-2024 + Errata to C63.10a-2024 Test Results: PASS Remark: This is ZigBee radio test report. Prepared by : Reviewer by : Approved by: Louis Zeng Mike Zheng Sewen Guo Report No.: BCTC2607640390E No.：BCTC/KJ-RF-ICT-001 Page 3 of 45 Edition：B.1 Table of Content Test Report Declaration Page 1. Version .................................................................................................................. 5 2. Test Summary ....................................................................................................... 6 3. Measurement Uncertainty ..................................................................................... 7 4. Product Information And Test Setup ..................................................................... 8 4.1 Product Information ............................................................................................... 8 4.2 Test Setup Configuration ...................................................................................... 9 4.3 Support Equipment ............................................................................................... 9 4.4 Channel List ........................................................................................................ 10 4.5 Test Mode ........................................................................................................... 10 4.6 Table Of Parameters Of Text Software Setting ................................................... 10 5. Test Facility And Test Instrument Used ............................................................... 11 5.1 Test Facility ......................................................................................................... 11 5.2 Test Instrument Used .......................................................................................... 11 6. Conducted Emissions .......................................................................................... 13 6.1 Block Diagram Of Test Setup .............................................................................. 13 6.2 Limit .................................................................................................................... 13 6.3 Test procedure .................................................................................................... 13 6.4 EUT Operating Conditions .................................................................................. 13 6.5 Test Result .......................................................................................................... 14 7. Radiated Emissions ............................................................................................. 16 7.1 Block Diagram Of Test Setup .............................................................................. 16 7.2 Limit .................................................................................................................... 17 7.3 Test procedure .................................................................................................... 18 7.4 EUT operating Conditions ................................................................................... 19 7.5 Test Result .......................................................................................................... 20 8. Radiated Band Emission Measurement and Restricted Bands Of Operation ...... 24 8.1 Block Diagram Of Test Setup .............................................................................. 24 8.2 Limit .................................................................................................................... 24 8.3 Test Procedure ................................................................................................... 25 8.4 EUT Operating Conditions .................................................................................. 25 8.5 Test Result .......................................................................................................... 26 9. Power Spectral Density Test ............................................................................... 27 9.1 Block Diagram Of Test Setup .............................................................................. 27 9.2 Limit .................................................................................................................... 27 9.3 Test procedure .................................................................................................... 27 9.4 EUT Operating Conditions ...................................................…

Text truncated - open the document above for the full version.

页 1 ANTENNA TEST REPORT Summary Antenna Photo & Length（mm） Address:No.7-1, Jiye Road, Leping Town, Sanshui District, Foshan City NAME ITEM SPEC. Model Name BT 2.4 GHz MAX. GAIN 0.58dBi Polarization Horizontal Impedance 50 Ω Antenna Type PCB Manufacturer NOVO (GUANGDONG) HIGH-TECH CO.LTD 页 2 Electrical performance test results Antenna performance indicators NO items Unit Performance indicators requirements Test results 1 Frequency range MHz 2412-2483 2400-2483 OK 2 Gain dBi / 2400 0.58 2440 -0.23 2480 0.14 4 Return loss dB ≤-10 2400 -21.0 2440 -22.9 2480 -15.6 4 Standing wave ratio dB / 2400 1.2 2440 1.16 2480 1.41 Log Mag S11 ANT Frequency MHz 2400-2500 页 3 Radiation parameter test Radiation pattern（2.4G） 水平面 SWR Frequency MHz 2400-2500 页 4 V 页 5 Antenna passive efficiency Frequency E Total. dB(dBi) Efficiency(%) 2400MHz 0.5847.32 2410MHz 0.0644.49 2420MHz 0.0644.28 2430MHz -0.1442.96 2440MHz -0.2342.31 2450MHz 0.0342.4 2460MHz 0.1741.59 2470MHz 0.2140.92 2480MHz 0.1440.3 2490MHz 0.2841.86 2500MHz 0.06 39.81

Conducted Emission Measurement Photos Radiated Emission Measurement Photos