2AZNP-XMM2101LCD Smart Projector

Hereby, [Formovie (Chongqing) Innovative Technology Co., Ltd.] declares that the radio equipment type [LCD Smart Projector / XMM2101] is in compliance with Directive 2014 / 53 / EU and Radio Equipment Regulations 2017. The full text of the declaration of conformity is available at the following internet address: http://www.formovie.com/global/service/support/declaration.html This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range. BT maximum transmitter power: 100mW at 2.4GHz - 2.4835GHz Wi-Fi 2.4G maximum transmitter power: 100mW at 2.4GHz - 2.4835GHz Wi-Fi 5G maximum transmitter power: 200mW at 5.15GHz - 5.25GHz,100mW at 5.25GHz - 5.35GHz & 5.47GHz - 5.725GHz All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points. Correct disposal of the batteries in this product (Applicable in countries with separate collection systems) This marking on battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. ImportantYou are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure Information: The radiated output power of this device meets the limits of FCC/IC radio frequency exposure limits.This device should be operated with a minimum separation distance of 20cm (8 inches) between the equipment and a person's body. Canada regulatory compliance This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Exposure to radio frequency energy The radiated output power of this device meets the limits of FCC/IC radio frequency exposure limits. This device should be operated with a minimum separation distance of 20 cm (8 inches) between the equipment and a personʼs body. CAN ICES-003 (B)/NMB-003(B) Le présent appareil est conforme aux CNR dʼInnovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. Lʼexploitation est autorisée aux deux conditions suivantes : (1) lʼappareil ne doit pas produire de brouillage, et (2) lʼutilisateur de lʼappareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible dʼen compromettre le fonctionnement. La bande 5150–5250 MHz est réservée uniquement pour une utilisation à lʼintérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux. Lʼexposition à lʼénergie radiofréquence La puissance de sortie rayonné de cet appareil est conforme aux limites de la FCC/IC limites dʼexposition aux fréquences radio. Cet appareil doit être utilisé avec une distance minimale de séparation de 20 cm entre lʼappareil et le corps dʼune personne. CAN ICES-003 (B)/NMB-003(B) - Risk of explosion if the battery is replaced by an incorrect type. - Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. - Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid …

Text truncated - open the document above for the full version.

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Applicant: Company name: Formovie (Chongqing) Innovative Technology Co., Ltd. Product Description: LCD Smart Projector Grantee code: 2AZNP FCC ID: 2AZNP-XMM2101 Contact Name: Pover Xiao Address: 4-401, #2 Longgang Road, Guojiatuo Area, Jiangbei District, Chongqing, China Telephone No: 13602500307 Email: [email protected] [Formovie (Chongqing) Innovative Technology Co., Ltd.] certifies that, as of the date of this filing of the application with the TCB, [FCC US Agent, LLC] is our designated US agent for service of process for the above referenced FCC ID. [Formovie (Chongqing) Innovative Technology Co., Ltd.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [FCC US Agent, LLC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2023/06/09 Applicant’s Name: Pover Xiao US Agent’s Name: Tim Payne Title: Certification Manager Title: Signature: Signature: Manager

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Formovie (Chongqing) Innovative Technology Co., Ltd. Grantee code: 2AZNP FCC ID: 2AZNP-XMM2101 Contact Name: Pover Xiao Address: 4-401, #2 Longgang Road, Guojiatuo Area, Jiangbei District, Chongqing, China Telephone No: 13602500307 Email: [email protected] i. Formovie (Chongqing) Innovative Technology Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. Formovie (Chongqing) Innovative Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. Formovie (Chongqing) Innovative Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Date: 2023/06/09 Applicant’s Name: Pover Xiao Title: Certification Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

1/1 Declaration of difference Date: 2023/06/09 To Whom It May Concern: The Product: LCD Smart Projector Model No.: XMM2101, XMM21**(*=0-9) The models used are the same in appearance, process material, hardware and software, just different model for different market or business purposes. There is no influence on the test results. Yours sincerely, Signatory Name Pover Xiao Position Certification Manager Company Name Formovie (Chongqing) Innovative Technology Co., Ltd. Address 4-401, #2 Longgang Road, Guojiatuo Area, Jiangbei District, Chongqing, China Tel 13602500307 E-Mail [email protected]

C5266091_X8_Ed.1 1/1 Letter of Authorization Formovie (Chongqing) Innovative Technology Co., Ltd. Company: Formovie (Chongqing) Innovative Technology Co., Ltd. Address: 4-401, #2 Longgang Road, Guojiatuo Area, Jiangbei District, Chongqing, China Product Name: LCD Smart Projector Model Number: XMM2101, XMM21**(*=0-9) FCC Identifier: 2AZNP-XMM2101 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Pover Xiao Date: 2023/06/09 Title: Certification Manager Signature of applicant:

C5266091_X10_Ed.1 1/1 Formovie (Chongqing) Innovative Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023/06/09 Subject: Request for Confidentiality FCC ID: 2AZNP-XMM2101 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality ID Label/Location No No Attestation Statement No No External Photos No Block Diagram Schematics Test Report No No Test Setup Photos No User’s Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) No No SDR Software / Security Info In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of _180_ days from the date of the Grant of Equipment Authorization and prior to marketing. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Pover Xiao Title: Certification Manager

Formovie (Chongqing) Innovative Technology Co., Ltd. 4-401, #2 Longgang Road, Guojiatuo Area, Jiangbei District, Chongqing, China DATE : 2023/06/09 Formovie (Chongqing) Innovative Technology Co., Ltd. 4-401, #2 Longgang Road, Guojiatuo Area, Jiangbei District, Chongqing, China Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint below company and person: Name Damon Hu Position Manager Company Name Dongguan Dongdian Testing Service Co.,Ltd. Address 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel / Fax Tel: +86-0769-38826678-850 E-Mail [email protected] to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. Applicant name Formovie (Chongqing) Innovative Technology Co., Ltd. Address 4-401, #2 Longgang Road, Guojiatuo Area, Jiangbei District, Chongqing, China Yours sincerely, Signatory Name Pover Xiao Position Certification Manager Company Name Formovie (Chongqing) Innovative Technology Co., Ltd. Address 4-401, #2 Longgang Road, Guojiatuo Area, Jiangbei District, Chongqing, China Tel 13602500307 E-Mail [email protected]

Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23042304-1E Page 1 of 16 AppendixI: Photos of the EUT Product Name : LCD Smart Projector Model Number : XMM2101 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23042304-1E Page 2 of 16 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23042304-1E Page 3 of 16 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23042304-1E Page 4 of 16

Made in China No40022 SKUXPP23AA190WCNSN23304/7000001X Production Date: 04/2023 C025FGN 铭牌 D66010001259 向翔 B ViewSizeUnit mm Scale A3 Qty Rev. Rev. DescriptionPreparedApproved Date AA B C D E F B C D E F 12 3 4 56 7 8 12 3 4 56 7 8 ANGLES ±1° HOLES +0.1/0 PINS 0/-0.1 TOLERANCE TABLE FOR UNTOLERANCED DIMENSIONS ( ) Drawn Standard Approved Title Material Part No. Sheet of 2023/04/10 向翔 新版发行 2023/05/04 向翔 内容修改 A B 11 1:1 1PCS Form0158 Rev1.5 Copyright statement: All rights resersed. No copies are permitted without approval. 技术要求： 1. 白底灰字, 尺寸：55X30mm, 公差:±0.2mm； 2. 材料：100#白色PET，覆可打印哑膜； 3. 字体：汉仪旗黑，大小如图； 5. 底面备胶； 4. 将SN条码打印在在条码区； 6. 环保要求：符合RoHS、REACH及POPS法规； 7. 打印清晰，能通过可靠性测试，酒精加白布反复擦拭不掉色。 55mm 30mm 4mm 4-R2.5 Arial Regular 3.5PT 来料卷装，卷心直径76mm 条码打印示意图（仅供参考，请以实际的条码为准）： 1. 将SKU和SN条码打印在图示位置； 2. 条码字体/大小/颜色如图所示； 3. 条码打印需用理光B110CR碳带； 4. 条码必须通过耐磨测试； 5. 环保要求：符合RoHS、REACH及POPS法规。 4mm PANTONE 4194 C PANTONE 4247 C

Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23042304-1E Page 4 of 16 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23042304-1E Page 5 of 16 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23042304-1E Page 6 of 16 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23042304-1E Page 7 of 16 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23042304-1E Page 8 of 16 WIFI 1 interface BT interface WIFI 2 interface Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23042304-1E Page 9 of 16 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23042304-1E Page 10 of 16 WIFI 1 antenna Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23042304-1E Page 11 of 16 WIFI 2 antenna Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23042304-1E Page 12 of 16 BT antenna Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23042304-1E Page 13 of 16 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23042304-1E Page 14 of 16 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23042304-1E Page 15 of 16 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23042304-1E Page 16 of 16 END

Dongguan Dongdian Testing Service Co., Ltd. Report No.:DDT-RE23042304-2E05 Page 1 of 8 RF EXPOSURE REPORT FOR Issued By: Dongguan Dongdian Testing Service Co., Ltd. Add.: No. 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel.: +86-0769-38826678, E-mail: [email protected], http://www.dgddt.com Applicant : Formovie (Chongqing) Innovative Technology Co., Ltd. Address : 4-401, #2 Longgang Road, Guojiatuo Area, Jiangbei District, Chongqing, China Equipment under Test : LCD Smart Projector Model No. : XMM2101, XMM21**(*=0-9) Trade Mark : Xming, WEWATCH FCC ID : 2AZNP-XMM2101 Manufacturer : Formovie (Chongqing) Innovative Technology Co., Ltd. Address : 4-401, #2 Longgang Road, Guojiatuo Area, Jiangbei District, Chongqing, China Report No.: DDT-RE23042304-2E05 Issued Date: Jun. 06, 2023 Dongguan Dongdian Testing Service Co., Ltd. Report No.:DDT-RE23042304-2E05 Page 2 of 8 Table of Contents Test report declares.......................................................................................................3 1. General Information ....................................................................................................... 5 1.1. Description of equipment ............................................................................................... 5 1.2. Assess laboratory ........................................................................................................... 6 2. RF Exposure Evaluation ................................................................................................ 7 2.1. Requirement ................................................................................................................... 7 2.2. Calculation method ........................................................................................................ 7 2.3. Estimation result ............................................................................................................. 8 Dongguan Dongdian Testing Service Co., Ltd. Report No.:DDT-RE23042304-2E05 Page 3 of 8 Test Report Declare Standard Used: KDB447498 D01 General RF Exposure Guidance v06 We Declare: The equipment described above is assessed by Dongguan Dongdian Testing Service Co., Ltd. and in the configuration assessed the equipment complied with the standards specified above. The assessed results are contained in this report and Dongguan Dongdian Testing Service Co., Ltd. is assumed of full responsibility for the accuracy and completeness of these assess. After evaluation, our opinion is that the equipment In Accordance with above standard. Report No.: DDT-RE23042304-2E05 Date of Receipt: May 08, 2023 Date of Test: May 10, 2023~ Jun. 05, 2023 Prepared By: Approved By: ____________________ ______________________ Jacky Huang/Engineer Damon Hu/EMC Manager Note: This report applies to above tested sample only. This report shall not be reproduced in parts without written approval of Dongguan Dongdian Testing Service Co., Ltd. Applicant : Formovie (Chongqing) Innovative Technology Co., Ltd. Address : 4-401, #2 Longgang Road, Guojiatuo Area, Jiangbei District, Chongqing, China Equipment under Test : LCD Smart Projector Model No. : XMM2101, XMM21**(*=0-9) Trade mark : Xming, WEWATCH Manufacturer : Formovie (Chongqing) Innovative Technology Co., Ltd. Address : 4-401, #2 Longgang Road, Guojiatuo Area, Jiangbei District, Chongqing, China E S T T I N N A I G D S G E N R O V D I C E N A C U O G . , G L N T O D D . Dongguan Dongdian Testing Service Co., Ltd. Report No.:DDT-RE23042304-2E05 Page 4 of 8 Revision History Rev. Revisions Issue Date Revised By --- Initial issue Jun. 06, 2023 Dongguan Dongdian Testing Service Co., Ltd. Report No.:DDT-RE23042304-2E05 Page 5 of 8 1. General Information 1.1. Description of equipment EUT Name : LCD Smart Projector Model Number : XMM2101, XMM21**(*=0-9) Model Differences : The models used are the same in appearance, process material, hardware and software, just different model for different market or business purposes, therefore was tested on the model XMM2101. EUT function description : Please reference user manual of this device Power supply : DC 19V from external switching power supply Radio Specification : Bluetooth V5.0, IEEE802.11b/g/n/a/ac Operation frequency : Bluetooth: 2402MHz-2480MHz IEEE802.11b/g/n/a/ac: 2412MHz-2462MHz, 5180MHz-5320MHz, 5500MHz-5720MHz, 5745MHz-5825MHz Modulation : Bluetooth: GFSK, /4-DQPSK, 8DPSK IEEE 802.11b: DSSS (CCK, QPSK, BPSK) IEEE 802.11g: OFDM (64QAM, 16QAM, QPSK, BPSK) IEEE 802.11n HT20, HT40: OFDM (64QAM, 16QAM, QPSK, BPSK) IEEE 802.11a: OFDM (64QAM, 16QAM, QPSK, BPSK) IEEE 802.11ac: VHT20, VHT40, VHT80: OFDM (256QAM, 64QAM, 16QAM, QPSK, BPSK) Transmitter rate : Bluetooth: 1Mbps, 2Mbps, 3Mbps IEEE 802.11b: up to 11 Mbps IEEE 802.11g/a: up to 54 Mbps IEEE 802.11n HT20: up to 144.4 Mbps IEEE 802.11n HT40: up to 300 Mbps IEEE 802.11ac VHT20: up to 173.4 Mbps IEEE 802.11ac VHT40: up to 400 Mbps IEEE 802.11ac VHT80: up to 866.6 Mbps Antenna Gain : Bluetooth Antenna: maximum PK gain: 3.82 dBi WIFI Antenna 1: 2.4G band maximum PK gain: 2.36 dBi, 5G band maximum PK gain: 3.89 dBi WIFI Antenna 2: 2.4G band maximum PK gain: 3.21 dBi, 5G band maximum PK gain: 3.78 dBi Sample Number : S23042304-01 Note: Serial model No.: XMM21** only apply for FCC ID. Bluetooth: Antenna information Ant gain GFSK 3.82 /4-DQPSK 3.82 8DPSK 3.82 2.4G Band: Antenna information Ant1 gain Ant2 gain Directional gain IEEE 802.11b 2.36 3.21 / IEEE 802.11g 2.36 3.21 / IEEE 802.11n HT20 2.36 3.21 2.91 IEEE 802.11n HT40 2.36 3.21 2.91 Dongguan Dongdian Testing Service Co., Ltd. Report No.:DDT-RE23042304-2E05 Page 6 of 8 5G Band: Antenna information Ant1 gain Ant2 gain Directional gain IEEE 802.11a 3.89 3.78 / IEEE 802.11n HT20 3.89 3.78 3.42 IEEE 802.11n HT40 3.89 3.78 3.42 IEEE 802.11ac VHT20 3.89 3.78 3.42 IEEE 802.11ac VHT40 3.89 3.78 3.42 IEEE 802.11ac VHT80 3.89 3.78 3.42 Note: Directional gain = 10 log[(10G1 /10 + 10G2…

Text truncated - open the document above for the full version.

Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-RE23042304-2E02 Page 1 of 77 FCC AND ISED CERTIFICATION TEST REPORT FOR Issued By: Dongguan Dongdian Testing Service Co., Ltd. Add.: No. 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel.: +86-0769-38826678, E-mail: [email protected], http://www.dgddt.com Applicant : Formovie (Chongqing) Innovative Technology Co., Ltd. Address : 4-401, #2 Longgang Road, Guojiatuo Area, Jiangbei District, Chongqing, China Equipment under Test : LCD Smart Projector Model No. : XMM2101, XMM21**(*=0-9) Trade Mark : Xming, WEWATCH FCC ID : 2AZNP-XMM2101 IC : 27267-XMM2101 Manufacturer : Formovie (Chongqing) Innovative Technology Co., Ltd. Address : 4-401, #2 Longgang Road, Guojiatuo Area, Jiangbei District, Chongqing, China Report No.: DDT-RE23042304-2E02 Issued Date: Jun. 02, 2023 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-RE23042304-2E02 Page 2 of 77 Table of Contents Test report declares.......................................................................................................4 1. Summary of Test Results ............................................................................................... 6 2. General Test Information ............................................................................................... 7 2.1. Description of EUT ......................................................................................................... 7 2.2. Accessories of EUT ........................................................................................................ 8 2.3. Assistant equipment used for test .................................................................................. 8 2.4. Block diagram of EUT configuration for test .................................................................. 8 2.5. Test environment conditions .......................................................................................... 8 2.6. Deviations of test standard............................................................................................. 9 2.7. Test laboratory ............................................................................................................... 9 2.8. Measurement uncertainty ............................................................................................... 9 3. Equipment Used During Test ....................................................................................... 10 4. 6 dB Bandwidth ............................................................................................................ 12 4.1. Block diagram of test setup .......................................................................................... 12 4.2. Limits ............................................................................................................................ 12 4.3. Test procedure ............................................................................................................. 12 4.4. Test result ..................................................................................................................... 12 4.5. Original test data .......................................................................................................... 13 5. 99% Bandwidth ............................................................................................................ 15 5.1. Block diagram of test setup .......................................................................................... 15 5.2. Limits ............................................................................................................................ 15 5.3. Test procedure ............................................................................................................. 15 5.4. Test Result ................................................................................................................... 15 5.5. Test Graphs .................................................................................................................. 16 6. Maximum Peak Output Power ..................................................................................... 18 6.1. Block diagram of test setup .......................................................................................... 18 6.2. Limits ............................................................................................................................ 18 6.3. Test procedure ............................................................................................................. 18 6.4. Test result ..................................................................................................................... 18 6.5. Original test data .......................................................................................................... 19 7. Power Spectral Density ................................................................................................ 21 7.1. Block diagram of test setup .......................................................................................... 21 7.2. Limits ............................................................................................................................ 21 7.3. Test procedure ............................................................................................................. 21 7.4. Test result ..................................................................................................................... 21 7.5. Test graphs .................................................................................................................. 22 8. Band Edge Compliance (Conducted Method) ............................................................. 24 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-RE23042304-2E02 Page 3 of 77 8.1. Block diagram of test setup ..................................................................…

Text truncated - open the document above for the full version.

Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-RE23042304-2E02 Page 48 of 77 10. RF Conducted Spurious Emissions 10.1. Block diagram of test setup 10.2. Limits In any 100 kHz bandwidth outside the frequency bands in which the spread spectrum intentional radiator in operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power. 10.3. Test procedure (1)…

Text truncated - open the document above for the full version.