2AZONY1IP Camera

Can’t connect? Need help? WE CAN HELP DO NOT RETURN THIS PRODUCT TO THE STORE support.mygeeni.com (888)232-3143 Toll-free or tap ‘support‘ for help in the Geeni app. SMART WI-FI CAMERA START GUIDE Thank you for purchasing your GEENI smart home product. Get started using your new devices by downloading Geeni, one convenient app that manages everything straight from your phone or tablet. Easily connect to your home Wi-Fi, and control multiple devices from the touch of your fingertips. 01 02 03 05 06 09 12 Download & Register Plug In Mounting The Camera Connect (QR Mode) Connect (Easy Mode) Settings Questions, Troubleshooting, Notices Contents Start Guide 15 17 Google Assistant Amazon Alexa Voice Control Guide FCC Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna. 18 You can rename your devices in the Geeni app, and Alexa will refer to them by the same name. So if you rename a smart bulb to “Living Room“ or a nickname like a smart camera to “Living Room Camera” or “Baby’s Room,” Alternatively, you can create an Alexa group, like “Bedroom“ or “Downstairs,“ and add the device to the group. Alexa will recognize the group name in the Alexa app, or the device name in the Geeni app. More information is available at: http://tinyurl.com/alexa-smart-home-groups Amazon Alexa 04 Choose “Discover Devices.“ After a few seconds your GEENI devices will be displayed under Smart Home in the Alexa app. 03 Authorize your account with Smart Home Skills using the username and password from your Geeni app. Support: If you encounter any issues, please contact us at support.mygeeni.com for help. (888) 232-3143 Toll-free To explore our full selection of products, visit us at: www.mygeeni.com © 2021 Merkury Innovations • 45 Broadway 3rd FL, New York NY 10006. The illustrated product and specifications may differ slightly from those supplied. Geeni is a trademark of Merkury Innovations LLC. iPhone, Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google, Google Play, and related marks and logos are trademarks of Google LLC. iOS is a registered trademark of Cisco in the U.S. and other countries and is used under license. Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates. All other trademarks and trade names are those of their respective owners. Made in China START GUIDE Smart Wi-Fi Camera Power Adapter Mounting Kit (Screw + Wall Anchor) USB Cable User Manual What’s in the Box Get Ready Know your Wi-Fi network and password Make sure you’re connecting to a 2.4GHz Wi-Fi network. (Geeni can’t connect to 5GHz networks) Make sure your mobile device is running iOS ® 9 or higher or Android™ 5.0 or higher a microSD card can be used to save recorded footage but is not required 2.4GHz iOS 9 Android 5.0 1717 To control your GEENI smart home products, just ask Alexa. Make sure your devices are already set up using the Geeni app. 01 02 Open the Alexa app and go to Skills in the menu. Search for Geeni then tap Enable. “Alexa, show Living Room Camera.“ “Alexa, show me the kids room Camera.“ Things you can say*: Amazon Echo Show, Amazon Fire TV, and any Alexa- enabled TV or screen. Stream to: *Some commands require compatible devices. 16 04 Authorize your account with Google Assistant using the username and password from your Geeni app. 03 Choose “Geeni“ from the list of Home Control partners. Now your Google Home app and GEENI devices are linked! You’re now able to say “Hey Google“ and control your GEENI devices. At any time, go into the “Home Control“ section of the Google Home app to set nicknames and rooms for your devices. You can rename your devices in the Geeni app, and Google Assistant will refer to them by the same name. So if you rename a camera to ‘Living Room Camera’ or ‘Baby’s Room,“ then Google Assistant will use that same name later on. You can always give it a nickname using the Google Home app as well. Google Assistant will be able to control devices by room. Google Assistant 1 STEP 1 Download the Geeni App from App Store or Google Play. Register an account on your Geeni App. 01. Enter your mobile phone number or email address 03. Log in to the App. 02. Enter the verification code and create a password. Download & Register 2 Plug In SD Card Installation STEP 2 STEP 3 Plu…

Text truncated - open the document above for the full version.

Shenzhen Ka Wah Hengtai Technology Co.,Ltd Model Difference Data：2022.09.15 Product description: IP Camera Model name: Y1, Y6,Y9,Y12,Y13,Y14,Y15, Y16,Y18,Y19,Y20,Y21,Y22,Y23,Y24 Trade Name: N/A FCC ID: 2AZONY1 All the model are the same circuit and RF module, except model names . Regards Sincerely Client’s signature : Client’s name / title : Lian youyun（manager） Contact information / address：2F, Building B6, The Third Industrial Zone, Feng Huang Gang,Xixiang, Bao'an, Shenzhen, 518101, China

Shenzhen Ka Wah Hengtai Technology Co.,Ltd (2022.09.15) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (IP Camera / Y1, Y6,Y9,Y12,Y13,Y14,Y15, Y16,Y18,Y19,Y20,Y21,Y22,Y23,Y24 / FCC ID: 2AZONY1 ) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Signature: Name: Lian youyun Title: manager

Shenzhen Ka Wah Hengtai Technology Co.,Ltd (2022.09.15) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen CTB Testing Technology Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Name: Lian youyun Title: manager

External Photos

Model: Y1 FCC ID: 2AZONY1 Label Location

Internal Photos ANT

2022/9/15 Shenzhen chuangxiang Communication Technology Co., Ltd . . Sample acknowledgement Customer Name: Jiahua Hengtai project name: y-c200 sample signing date: August 31, 2022 Supplier confirmation makeresearch and development structurequality 眭海云2022.8.31黄城2022.8.31卢锋2022.08.31 Confirmed by the demander projectappearancestructure qualit conclusion □Batch useMP□Limited use（）K □ROHS Add: 10 / F, building 16, Bilang science and Technology Park, Guangming New District, Shenzhen Tel: 15602440668 E-mail:[email protected] 2022/9/15 目录 1、Project status 2、Antenna version information 3、testing environment 4、Matching circuit 5、Passive data 6、OTA active data 7、Antenna size diagram Shenzhen chuangxiang Communication Technology Co., Ltd 2022/9/15 1、Project status Main antenna frequencyAntennastatusAntennaformDesign areaMatching circuit WIFI2.4G PCBAPIFAWelded to main board nothing Shenzhen chuangxiang Communication Technology Co., Ltd 2022/9/15 2、Antenna versioninformation entry nameeditiontimeremarks v1.02022.8.30First commissioning Shenzhen chuangxiang Communication Technology Co., Ltd 2022/9/15 3、testing environment Shenzhen chuangxiang Communication Technology Co., Ltd 2022/9/15 5、Passive data Shenzhen chuangxiang Communication Technology Co., Ltd 2022/9/15 5、Passive data Frequen cy band Test itemsfrequency (MHz) Test value 2402- 2480 efficiency 《%》 240260.32 244161.18 248060.37 gain 《dbi》 24021.63 24411.76 24801.73 Shenzhen chuangxiang Communication Technology Co., Ltd 2022/9/15 5、Passive data Shenzhen chuangxiang Communication Technology Co., Ltd 2022/9/15 6、OTA active data WIFI-BTRP（dbm）TIS（dbm） 116.06-80.40 6 15.54-80.84 11 14.62-81.48 WIFI-GTRP（dbm）TIS（dbm） 114.23-72.03 6 13.21-72.72 11 12.54-73.31 Shenzhen chuangxiang Communication Technology Co., Ltd 2022/9/15 6、OTA active data WIFI-NTRP（dbm）TIS（dbm） 114.26-70.23 6 13.54-70.88 11 12.32-70.25 Shenzhen chuangxiang Communication Technology Co., Ltd 2022/9/15 6、OTA active data Shenzhen chuangxiang Communication Technology Co., Ltd 2022/9/15 6、OTA active data Shenzhen chuangxiang Communication Technology Co., Ltd 2022/9/15 6、OTA active data Shenzhen chuangxiang Communication Technology Co., Ltd 2022/9/15 Shenzhen chuangxiang Communication Technology Co., Ltd Antenna size diagram

FCC §15.247 (i), §2.1091 – RF Exposure FCC ID: 2AZONY1 Applied procedures / limit According to FCC §15.247(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Note: ƒ is frequency in MHz * = Power density limit is applicable at frequencies greater than 100 MHz Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz * = Plane-wave equivalent power density MPE PREDICTION Predication of MPE limit at a given distance, Equation from OET Bulletin 65, Edition 97-01 Where: S = power density P = power input to antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna,R=20cm Test Result of RF Exposure Evaluation Modes& Channel Freq. (MHz) Tune up Produce power Maximu m peak output power (dBm) Output power to antenna (mW) Antenna Gain (numeric) Power Density (S) (mW/ cm2) Limit (mW / cm2 ) Result 2.4G WIFI 802.11b&2 437 8±1 9 7.9433 1.4997 (1.76dBi) 0.00237 1 Pass

Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB220908060RFX Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 63 TEST REPORT Compiled by: Reviewed by: Approved by: Chen Zheng Arron Liu Bin Mei / Director N ote: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Product Name: IP Camera FCC ID: 2AZONY1 Trademark: N/A Model Number: Y1, Y6, Y9, Y12, Y13, Y14, Y15, Y16, Y18, Y19, Y20, Y21, Y22, Y23, Y24 Prepared For: Shenzhen Ka Wah Hengtai Technology Co., Ltd Address: 2F, Building B6, The Third Industrial Zone, Feng Huang Gang, Xixiang, Bao'an, Shenzhen, 518101, China Manufacturer: Shenzhen Ka Wah Hengtai Technology Co., Ltd Address: 2F, Building B6, The Third Industrial Zone, Feng Huang Gang,Xixiang, Bao'an, Shenzhen, 518101, China Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: Floor 1&2, Building A, No. 26 of Xinhe Road, Xinqiao Community, Xinqiao Street, Baoan District, Shenzhen, Guangdong, China. Sample Received Date: Aug. 31, 2022 Sample tested Date: Aug. 31, 2022 to Sep. 08, 2022 Issue Date: Sep. 08, 2022 Report No.: CTB220908060RFX Test Standards FCC Part15.247 ANSI C63.10:2013 Test Results PASS Remark: This is WIFI-2.4GHz band radio test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB220908060RFX Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 63 TABLE OF CONTENT Test Report Declaration Page 1. VERSION .......................................................................... 3 2. TEST SUMMARY ................................................................... 4 3. MEASUREMENT UNCERTAINTY ..................................................... 5 4. PRODUCT INFORMATION AND TEST SETUP ......................................... 6 4.1 Product Information ................................................................... 6 4.2 Test Setup Configuration ............................................................... 7 4.3 Support Equipment.................................................................... 7 4.4 Channel List ......................................................................... 8 4.5 Test Mode ........................................................................... 8 4.6 Test Environment ..................................................................... 8 5. TEST FACILITY AND TEST INSTRUMENT USED ....................................... 9 5.1 Test Facility .......................................................................... 9 5.2 Test Instrument Used .................................................................. 9 6. AC POWER LINE CONDUCTED EMISSION ............................................. 11 6.1 Block Diagram Of Test Setup .......................................................... 11 6.2 Limit ............................................................................... 11 6.3 Test procedure ...................................................................... 12 6.4 Test Result ......................................................................... 13 7. RADIATED SPURIOUS EMISSION ................................................... 15 7.1 Block Diagram Of Test Setup .......................................................... 15 7.2 Limit ............................................................................... 15 7.3 Test procedure ...................................................................... 16 7.4 Test Result ......................................................................... 17 8. BAND EDGE AND RF COUNDUCTED SPURIOUS EMISSIONS .......................... 39 8.1 Block Diagram Of Test Setup .......................................................... 39 8.2 Limit ............................................................................... 39 8.3 Test procedure ...................................................................... 39 8.4 Test Result ......................................................................... 40 9. COUDUCTED OUTPUT POWER ..................................................... 47 9.1 Block Diagram Of Test Setup .......................................................... 47 9.2 Limit ............................................................................... 47 9.3 Test procedure ...................................................................... 47 9.4 Test Result ......................................................................... 48 10. 6DB OCCUPIED BANDWIDTH ...................................................... 49 10.1 Block Diagram Of Test Setup ......................................................... 49 10.2 Limit .............................................................................. 49 10.3 Test procedure ..................................................................... 49 10.4 Test Result ........................................................................ 50 11. POWER SPECTRAL DENSITY ...................................................... 55 11.1 Block Diagram Of Test Setup ......................................................... 55 11.2 Limit .............................................................................. 55 11.3 Test procedure ..................................................................... 55 11.4 Test Result ........................................................................ 56 12. ANTENNA REQUIREMENT ......................................................... 61 13. EUT TEST SETUP PHOT…

Text truncated - open the document above for the full version.

Radiated Emission Below 1G Above 1GHz Conducted Emission