2AZT3-701XCT1Agricultural Asset Tracker

The smartphone app contains the user’s manual and required compliance info

cTag User Manual Getting Started Downloading the 701x App To interface with cTag, download the 701x app from the App Store or Google Play Store and install it onto your phone. Setting Up cTAG Follow the steps below to set up your cTAG for the first time. 1. Open the 701x app and follow the on- screen prompts to create an account. Then, log in to the account. 2. Scan the 3D barcode on the front of the tag. The tags information will automatically populate into your app. 3. Assign the tag to the animal it will be applied to. 4. Locate a suitable tagging site on the animal's ear - the middle portion between the upper and lower cartilage. 5. Place the tag in the 701x applicator and apply to animal. 701x Information 701x 700 Main Ave. Fargo, ND 58104 www.701x.com [email protected] Implementing AG Follow Us 701x @701x.inc @701x_inc

www.701x.com 700 Main Ave Fargo, ND 58103 Authority to Act as Agent Date: October 24, 2022 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: Nic Johnson of the Nebraska Center for Excellence in Electronics (NCEE Labs) is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: _October 24 th , 2023_________ By: __________________________ Braydon Love_________ (Signature) (Print name) Title: Engineer___________________ On behalf of: 701x, Inc.___________________ (Company Name) Telephone: (218) 303-7779__________________

1(1) www.701x.com 700 Main Ave Fargo, ND 58103 October 24th, 2022 Attention: Application Examiner RE: Request for Confidentiality Applicant: 701x, Inc FCC ID: 2AZT3-701CT1 To Whom It May Concern: Request is hereby submitted by 701x, Inc to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: • Schematics • Detailed Block Diagrams • Detailed Operational/Functional Description • Internal Photos These items contain detailed system and equipment description and related information about the product which 701x considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, 701x also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. 701x requests permanent confidentiality for internal photographs, as the inside of the device will not be easily accessible to view the printed circuit board. The interior enclosure is permanently sealed by a plastic welding process and would require destruction of the device to attempt to gain access to interior components. Sincerely, Braydon Love Certification Engineer 701x

1(1) www.701x.com 700 Main Ave Fargo, ND 58103 December 8th, 2022 Attention: Application Examiner RE: cTag Transmission Duty Cycle Applicant: 701x, Inc FCC ID: 2AZT3-701CT1 To Whom It May Concern: The cTag product uses the Bluetooth Low Energy protocol for wireless communication. Thus, the device firmware limits the transmission time of the BLE transmitter to align with the BLE standard. In addition, the device application FW further limits the transmission duty cycle to be much lower than what the BLE standard allows. The cTag is considered a low power device and as such, the device application firmware limits transmissions to conserve battery, thus no large bursts of data or files are ever sent. Neither the user nor the paired device can control the transmission time of the cTag. For duty cycle measurements, all operations modes of operation were considered, and the worst-case scenario was used for measurement. In this mode, the user device is holding a BLE connection to the cTag. Sincerely, Braydon Love Certification Engineer 701x

EXTERNAL PHOTOS EXTERNAL PHOTOS

cTag Labeling Information Document Revision: R1.0 Last Revised: 11/4/22 700 Main Ave, Fargo, ND 58103 www.701x.com cTag Labeling Information 1 Revision History Revision Number Change Description Revision Date Author R1.0 Initial Release 11/4/2022 BWL cTag Labeling Information 2 Labeling Information Due to the small size of the device and restraints in the manufacturing process, the e-labeling method will be used for this device. The device is only able to be used in conjunction with a mobile device (i.e. smartphone or tablet) that can display the FCC information digitally. Access to the required information on the e-label: 1. Users are able to access the information in no more than three steps in a device’s menu. The actual steps are: • Tap the three bar menu in the top left • Tap “Support” • Tap “Legal and Regulatory” 2. The information is stored on the device, no special accessories or supplemental plug-ins are required to access the information. The information is secure and un-editable. Yes, the data is stored on the device and is not able to be edited by the user. 3. Readability of Regulatory Information The FCC regulatory information is formatted to be the same size font as all other information in the user application. 4. Packaging Labeling The packaging for the device contains the printed FCCID of the device as well as instructions pointing to the e-labeling of the device for further information. 3 E-Labeling cTag Labeling Information cTag Labeling Information 4 Packaging Labeling The cTag will be shipped in bulk packaging of 10 units each. Each shipping tray will contain reference to the FCCID. Figure 1: Bulk Packaging configuration

Only radiated measurements are used to show compliance with FCC limits for fundamental and spurious emissions, so antenna gain and datasheet are not provided.

The Nebraska Center for Excellence in Electronics (NCEE) authorizes the above named company to reproduce this report provided it is reproduced in its entirety for use by the company’s employees only. Any use that a third party makes of this report, or any reliance on or decisions made based on it, are the responsibility of such third parties. NCEE accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. This report applies only to the items tested. FCC/ISED Test Report Prepared for: 701x Address: 700 Main Avenue Fargo, North Dakota 58103, USA Product: cTAG Test Report No: R20220914-20-01-E1D Approved by: __________________ Nic S. Johnson, NCE Technical Manager iNARTE Certified EMC Engineer #EMC-003337-NE DATE: 16 December 2022 Total Pages: 27 Report Number: R20220914-20-01-E1D Rev D Prepared for: 701x The Nebraska Center for Excellence in Electronics 4740 Discovery Drive Lincoln, NE 68521 Page 2 of 27 REVISION PAGE Rev. No. Date Description 0 31 October 2022 Original – NJohnson Prepared by BWinter A 15 November 2022 Rev A – Njohnson Prepared by BWinter Correct page header error on page 2. Correct tables on pages 15, 17, and 19. Remove extraneous statement on pages 15, 17, and 19. Change tables 2, 4, 6 to include a duty cycle correction factor. Add correction factors to restricted band edge measurements. B 30 November 2022 Rev B – Njohnson Prepared by BWinter Add plot that confirms continuous transmit. Add plot that demonstrates a large delta between peak and average measurements on the 2 nd harmonic of the higher frequency channel. C 8 December 2022 Duty cycle measurements were measured from a sample operating in the worse-case production transmit mode. All average measurements were replaced with peak measurements – DCCF. NJ D 16 December 2022 Duty cycle has been updated throughout the report-KV Report Number: R20220914-20-01-E1D Rev D Prepared for: 701x The Nebraska Center for Excellence in Electronics 4740 Discovery Drive Lincoln, NE 68521 Page 3 of 27 CONT EN TS Revision Page ............................................................................................................................................................................... 2 Tables of Figures ................................................................................................................................................................ 4 Table of Tables .................................................................................................................................................................... 4 1.0 Summary of test results ....................................................................................................................................... 5 2.0 EUT Description .................................................................................................................................................... 6 2.1 Equipment under test ........................................................................................................................................ 6 2.2 Description of test modes ................................................................................................................................ 7 2.3 Description of support units ............................................................................................................................ 7 3.0 Laboratory description ......................................................................................................................................... 8 3.1 Laboratory description ...................................................................................................................................... 8 3.2 Test personnel ..................................................................................................................................................... 8 3.3 Test equipment.................................................................................................................................................... 9 4.0 Detailed results .................................................................................................................................................... 10 4.1 Duty Cycle Correction Factor ........................................................................................................................ 10 4.2 Radiated emissions .......................................................................................................................................... 12 Appendix A: Sample Calculation ................................................................................................................................... 24 Appendix B – Measurement Uncertainty ...................................................................................................................... 26 REPORT END ..................................................................................................................................................................... 27 Report Number: R20220914-20-01-E1D Rev D Prepared for: 701x The Nebraska Center for Excellence in Electronics 4740 Discovery Drive Lincoln, NE 68521 Page 4 of 27 TABL ES OF FIGUR ES Figure Number Page Figure 1 – Duty Cycle................................................................................................................................................................. 10 Figure 2 – 100 ms test window ................................................................................................................................................. 11 Figure 3 - Radiated Emissions Test Setup ............................................................................................................................. 14 Figure 4 - Radiated Emissions Plot, Receive ..........................................................................................…

Text truncated - open the document above for the full version.

TEST SETUP PHOTOS TEST SETUP PHOTOS TEST SETUP PHOTOS