2AZUP-SP4236Wireless Game Controller for PS4

SP-4236 PS4/PS3 Wireless Game Controller User Manual Product Features 1. Dual shock motor,256-level precision 3D joysticks 2. With 6-axis Motion Sensor 3. 2-Points Touch Pad support both touch and press action 4. Support both PS3 and PS4 console 5. With 3.5mm headphone jack and microphone 6. With wake-up function when the console at sleep mode by press home button 7. With additional L3 R3 buttons at the back of the controller 8. This game controller does not support PS VITA TV Buttons Descriptions Action □ Action △ Action ○ Action X R3 Home Buttom Direction SHARE L3 OPTION Touch pad L2 R2 R1 USB L1 RGB R3 L3 3.5MM earphone RESET Connection Methods Connect the Play Station console to this controller with the USB charging cable, after the LED indicator light turns on, press the home button to get into the login page and select your user account, the connection procedure is completely finished, now you can pull out the USB charging cable and enjoy the Bluetooth wireless connection.there is no requirement of the USB cable for the next Bluetooth connection. Support Multiplayer game Under the multiplayer game status, press the PS button and then the RGB led bar will light on in blue, red, green, pink order to distinguish the user`s login order (1P :Blue 2P: Red 3P: Green 4P: Pink) Warm tips 1) Do not expose the product to strong light. 2) Do not beat the product vigorously. 3) Do not use or store this product in a hot or humid environment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement.

Shenzhen CHT Technology Co., Ltd. Covered Equipment Certification Attestation Letter DATE March 23, 2023 FCC ID: 2AZUP-SP4236 Shenzhen CHT Technology Co., Ltd.certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Shenzhen CHT Technology Co., Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: You Liang Chen Title: general manager Company Name: Shenzhen CHT Technology Co., Ltd. Date: 3/23/2023

(A2LA Certificate No. 4762.01) 11/19/2020 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 SHENZHEN ALPHA PRODUCT TESTING CO., LTD Building i, No.2, Lixin Road, Fuyong Street, Bao'an District Shenzhen, Guangdong, People’s Republic of China, 518103 Mr. Simple Guan Phone: +86 755-29766001-8100 ELECTRICAL (EMC) Valid To: May 31, 2022 Certificate Number: 4762.01 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following electromagnetic compatibility tests: Test Technology: Test Method(s) 1,2 Emissions Radiated and Conducted CFR 47, FCC Part 15B (using ANSI C63.4-2014); CFR 47, FCC Part 18 (using FCC MP-5 (1986)); ICES-001, ICES-003, ICES-005; RSS-GEN Radio Communications Unlicensed Radio CFR 47, FCC Part 15C (using ANSI C63.10-2013); CFR 47, FCC Part 15E (using ANSI C63.10-2013 or FCC KDB 905462 D02 (v02)); RSS-210, RSS-247, RSS-216, RSS-310, RSS-GEN Licensed Radio CFR 47, FCC Parts 22, 24, 25, 27, 30, 74, 90, 95, 97 and 101 (using ANSI/TIA-603-E and/or TIA- 102.CAAA-E); RSS-GEN, RSS-130, RSS-132, RSS-133, RSS-139, RSS-199, RSS-119 RF Exposure SPR-002, RSS-102 (MPE only) On the following products or types of products: Information Technology Equipment (ITE), Industrial, Scientific and Medical Equipment (ISM); Household Appliances, Electric Tools and similar Apparatus; Electrical Lighting and similar Equipment; Unintentional Radiators; Intentional Radiators; Sound and Television Broadcast Receivers and associated Equipment. 1 When the date, revision or edition of a test method standard is not identified on the scope of accreditation, the laboratory is required to be using the current version within one year of the date of publication, per Part C., Section 1 of A2LA R101 - General Requirements - Accreditation of ISO-IEC 17025 Laboratories. (A2LA Certificate No. 4762.01) 11/19/2020 Page 2 of 2 Testing Activities Performed in Support of FCC Certification in Accordance with 47 Code of Federal Regulations and FCC KDB 974614, Appendix A, Table A.1 2 Rule Subpart/Technology Test Method Maximum Frequency (MHz) Unintentional Radiators Part 15B ANSI C63.4:2014 40000 Industrial, Scientific, and Medical Equipment Part 18 FCC MP-5:1986 40000 Intentional Radiators Part 15C ANSI C63.10:2013 40000 U-NIII without DFS Intentional Radiators Part 15E ANSI C63.10:2013 40000 U-NIII with DFS International Radiators Part 15E FCC KDB 905462 D02 (v02) 40000 Commercial Mobile Services (FCC Licensed Radio Service Equipment) Parts 22 (cellular), 24, 25 (below 3 GHz), and 27 ANSI/TIA-603-E; TIA-102.CAAA-E 40000 General Mobile Radio Services (FCC Licensed Radio Service Equipment) Part 22 (non-cellular), 90 (below 3 GHz), 95 (below 3 GHz), 97 (below 3 GHz), 101 (below 3 GHz) ANSI/TIA-603-E; TIA-102.CAAA-E 40000 Microwave and Millimeter Bands Radio Services Parts 25, 30, 74, 90 (above 3 GHz), Part 95 (above 3 GHz), Part 97 (above 3 GHz), and 101 ANSI/TIA-603-E; TIA-102.CAAA-E 40000 2 Accreditation does not imply acceptance to the FCC equipment authorization program. Please see the FCC website (https://apps.fcc.gov/oetcf/eas/) for a listing of FCC approved laboratories. For the tests to which this accreditation applies, please refer to the laboratory’s Electrical Scope of Accreditation. Accredited Laboratory A2LA has accredited SHENZHEN ALPHA PRODUCT TESTING CO., LTD. Shenzhen, People’s Republic of China for technical competence in the field of Electrical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 19th day of November 2020. _______________________ Vice President, Accreditation Services For the Accreditation Council Certificate Number 4762.01 Valid to May 31, 2022

Differences Description We Shenzhen CHT Technology Co., Ltd. state: Product name: Wireless Game Controller for PS4 Model: SP4236, 90424, MGPSC All model’s the function, software and electric circuit are the same, except the model numbers difference. 2023-3-27 Name You Liang Chen Position general manager Company Name Shenzhen CHT Technology Co., Ltd. Address Building L, Shengguang Industrial Park,No. 152 Shajing DongHuan Road, XinQiao Street, Bao’An District, Shenzhen Tel 0755-23215379 Fax / Email [email protected] (Signature)

Shenzhen CHT Technology Co., Ltd. LETTER OF AGENCY March 23, 2023 Element Materials Technology 100 Frobisher Business Park Malvern Worcestershire WR14 1BX UK FCC ID: 2AZUP-SP4236 To Whom It May Concern: We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application, is subject to denial of federal benefits, that includes FCC benefits. Thank you for your attention to this matter. Yours faithfully company Shenzhen CHT Technology Co., Ltd. Signature Full Name You Liang Chen/ general manager

Shenzhen CHT Technology Co., Ltd. March 23, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Request for confidentiality FCC ID: 2AZUP-SP4236 To whom it may concern, We hereby respectfully request that under the provision of 47 CFR 0.459 and 0.457(d) the documents listed below and attached with this application for certification be provided with confidential status.  Schematics.pdf  Operational Description.pdf  Block Diagrams.pdf Any exhibit / information for which we have requested confidentiality, but which may not be accorded such treatment by the FCC, should be returned to us. The documents listed above contain trade secrets that are treated as confidential by us. Substantial competitive harm to us could result should they be made available to the public. Sincerely, Name: You Liang Chen Job Title: general manager

FCC ID: 2AZUP-SP4236 FCC ID: 2AZUP-SP4236 FCC ID: 2AZUP-SP4236 FCC ID: 2AZUP-SP4236

4.5cm 2.5cm Label Location FCC ID: 2AZUP-SP4236 Shenzhen CHT Technology Co., Ltd. Product name: Wireless Game Controller for PS4 Model No.: SP4236 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC ID: 2AZUP-SP4236 FCC ID: 2AZUP-SP4236 FCC ID: 2AZUP-SP4236 FCC ID: 2AZUP-SP4236 ANT FCC ID: 2AZUP-SP4236

Report No.: BL-SZ2330448-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: SHENZHEN CHT TECHNOLOGY CO., LTD. Address: 102 Building B2,2/F, Building L, ShengGuang Ind. Park, 152 Donghuan Rd. ShaJing, Huangpu Community XinQiao St., Bao'An District Shenzhen China Equipment Type: Wireless Game Controller for PS4 Model Name: SP4236 Brand Name: N/A Test Standard: IEEE Std 149-2021 Sample Arrival Date: Mar. 09, 2023 Test Date: Mar. 14, 2023 Date of Issue: Mar. 21, 2023 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Mai Jintian Checked by: Zou Liu Approved by: Tolan Tu (Testing Director) _______________ _______________ _______________ Report No.: BL-SZ2330448-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Mar. 21, 2023 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ........................................................................................................ 3 1.1 Test Laboratory ................................................................................................................... 3 1.2 Test Location ....................................................................................................................... 3 2 PRODUCT INFORMATION ....................................................................................................... 4 2.1 Applicant Information ........................................................................................................... 4 2.2 Manufacturer Information .................................................................................................... 4 2.3 General Description for Equipment under Test (EUT) ......................................................... 4 2.4 Ancillary Equipment ............................................................................................................. 4 2.5 Technical Information .......................................................................................................... 4 3 SUMMARY OF TEST RESULTS ............................................................................................... 5 3.1 Test Standards .................................................................................................................... 5 3.2 Test Verdict ......................................................................................................................... 5 3.3 Test Uncertainty .................................................................................................................. 5 4 GENERAL TEST CONFIGURATIONS ...................................................................................... 6 4.1 Test Condition ..................................................................................................................... 6 4.2 Test Equipment List ............................................................................................................. 6 4.3 Test Setup ........................................................................................................................... 7 ANNEX A TEST RESULTS ........................................................................................................... 8 A.1 Gain and Efficiency ............................................................................................................. 8 A.2 VSWR ................................................................................................................................. 8 ANNEX B RADIATION PATTERN ................................................................................................ 9 ANNEX C TEST SETUP PHOTOS ............................................................................................. 12 ANNEX D EUT PHOTO .............................................................................................................. 12 Report No.: BL-SZ2330448-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1/F, Building B, Ganghongji High-tech Intelligent Industrial Park, No. 1008, Songbai Road, Yangguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong Province, P. R. China Report No.: BL-SZ2330448-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant SHENZHEN CHT TECHNOLOGY CO., LTD. Address 102 Building B2,2/F, Building L, ShengGuang Ind. Park, 152 Donghuan Rd. ShaJing, Huangpu Community XinQiao St., Bao'An District Shenzhen China 2.2 Manufacturer Information Manufacturer SHENZHEN CHT TECHNOLOGY CO., LTD. Address 102 Building B2,2/F, Building L, ShengGuang Ind. Park, 152 Donghuan Rd. ShaJing, Huangpu Community XinQiao St., Bao'An District Shenzhen China 2.3 Gene…

Text truncated - open the document above for the full version.

FCC ID: 2AZUP-SP5269 RF Exposure evaluation According to 447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Worse case is as below: [2480MHz: 6.071dBm(4.047mW) output power] (4.047 mW /5mm) ·[√2.480 (GHz)]=1.263 <3.0 for 1-g SAR Then SAR evaluation is not required

ALPHA's reports is using a digital certificate that is trusted on Adobe's official server. If there is no digital certificate or the digital certificate shows damaged in your report. Please do not accept the report. E-mail: [email protected] Tel: 4008-3008-95 Website: http://www.a-lab.cn FCC TEST REPORT FCC ID: 2AZUP-SP4236 On Behalf of Shenzhen CHT Technology Co., Ltd. Wireless Game Controller for PS4 Model No.: SP4236, 90424, MGPSC Prepared for : Shenzhen CHT Technology Co., Ltd. Address : Building L, Shengguang Industrial Park, No. 152 Shajing DongHuan Road, XinQiao Street,Bao’An District, Shenzhen, China. Prepared By : Shenzhen Alpha Product Testing Co., Ltd. Address : Building i, No.2, Lixin Road, Fuyong Street, Bao’an District, 518103, Shenzhen, Guangdong, China Report Number : A2303020-C01-R01 Date of Receipt : March 9, 2023 Date of Test : March 9, 2023- March 17, 2023 Date of Report : March 17, 2023 Version Number : V0 Page 2 of 66 Report No.: A2303020-C01-R01 TABLE OF CONTENTS Description Page 1. Summary of Standards And Results ............................................................................................ 6 1.1. Description of Standards and Results ..................................................................................... 6 2. General Information........................................................................................................................ 7 2.1. Description of Device (EUT) .................................................................................................... 7 2.2. Accessories of Device (EUT) .................................................................................................. 8 2.3. Tested Supporting System Details .......................................................................................... 8 2.4. Block Diagram of connection between EUT and simulators ................................................... 8 2.5. Test Mode Description ............................................................................................................. 8 2.6. Test Conditions ........................................................................................................................ 9 2.7. Test Facility .............................................................................................................................. 9 2.8. Measurement Uncertainty ....................................................................................................... 9 2.9. Test Equipment List ............................................................................................................... 10 3. Maximum Peak Output power ..................................................................................................... 11 3.1. Limit ....................................................................................................................................... 11 3.2. Test Procedure ...................................................................................................................... 11 3.3. Test Setup .............................................................................................................................. 11 3.4. Test Result ............................................................................................................................. 11 4. Bandwidth ..................................................................................................................................... 12 4.1. Limit ....................................................................................................................................... 12 4.2. Test Procedure ...................................................................................................................... 12 4.3. Test Result ............................................................................................................................. 12 5. Carrier Frequency Separation ..................................................................................................... 19 5.1. Limit ....................................................................................................................................... 19 5.2. Test Procedure ...................................................................................................................... 19 5.3. Test Result ............................................................................................................................. 19 6. Number Of Hopping Channel ...................................................................................................... 21 6.1. Limit ....................................................................................................................................... 21 6.2. Test Procedure ...................................................................................................................... 21 6.3. Test Result ............................................................................................................................. 21 7. Dwell Time ..................................................................................................................................... 23 7.1. Test limit ................................................................................................................................. 23 7.2. Test Procedure ...................................................................................................................... 23 7.3. Test Result ............................................................................................................................. 23 8. Radiated emissions ...................................................................................................................... 35 8.1. Limit ....................................................................................................................................... 35 8.2. Block Diagram o…

Text truncated - open the document above for the full version.

FCC ID: 2AZUP-SP4236 Photos of Radiated emission FCC ID: 2AZUP-SP4236 Photos of Conducted Emission test