2BA4I-E1000Intelligent Guitar

Shenzhen
Flamma
Innovation
Co.,
Ltd.www.flammainnovation.com E1000 QUICK
GUIDE 快速指导 E1000
EN
MANUAL This
is
a
quick
guide.
For
a
more
detailed
manual,
please
enter
www.flammainnovation.com
to
download.
If
you
need
any
help
and
tech
support,
please
contact:
[email protected] 感谢您选择富了么公司的产品，该使用指南将帮助您快速了解如何使用本产品，如需了解更详细的信息， 请登陆富了么官网www.flammainnovation.com下载完整版说明书。 智能吉他 Intelligent
Guitar E1000
中文说明书






































Shenzhen
Flamma
Innovation
Co.,
Ltd.www.flammainnovation.com PRECAUTION
----------------------------------------------------------------------------------01-03 LAYOUT
------------------------------------------------------------------------------------------04 QUICKTOUR
-----------------------------------------------------------------------------------05-06 INSTRUCTIONS
------------------------------------------------------------------------------------07-09 SPECIFICATIONS
-----------------------------------------------------------------------------------10 CONTENT PRECAUTION Thanks
for
choosing
FLAMMA
guitar,
please
read
this
instructions
carefully
before
starting.
To
avoid
electric
shock,
short
circuit,
injury,
fire
hazard,
or
any
other
dangerous
factors
causing
damage
or
death,
please
read
the
instructions
carefully
before
using
the
device: Power
Supply ●




Please
use
the
power
supply
that
meets
the
power
requirements
of
the
FLAMMA
device.
The
power
supply
should

be
approved
by
relevant
authorities
and
meets
the
local
regulatory
requirements
(UL,
CSA,
VDE,
CCC).
●




Please
check
the
jack
plug
and
power
cord
is
working
properly
after
using
them
for
a
period.

Remove
thedust
and
smudginess
in
time
to
avoid
unexpected
damage.
●




Please
unplug
the
power
supply
from
the
socket
if
it
is
idle
for
a
long
time
or
during
a
thunderstorm.9 Battery ●





Please
do
not
power
On
or
charge
the
unit
in
a
humid
environment. ●





Please
do
not
charge
the
unit
in
extreme
temperature.



































Shenzhen
Flamma
Innovation
Co.,
Ltd.














01www.flammainnovation.com ●




If
there
is
a
peculiar
smell
or
strange
noise
during
charging,
please
stop
charging
as
soon
as possible
andcontactthe
after-sales
team
for
repair
or
replacement. ●




If
there
is
liquid
leakage,
please
do
not
touch
the
liquid
with
your
skin
or
eye.
If
any
touch
happens,
recommend
contacting
the
doctor
as
soon
as
possible
for
more
detailed
suggestions. ●




To
avoid
fire,
or
explosion,
please
do
not
disassemble
it,
squeeze
it,
or
throw
it
into
fire
or
water.
Please
do
not
use
the
battery.
If
it
swells, ●





Please
do
not
expose
it
to
heat,
and
do
not
use
it
after
being
soaked. Cleaning ●




Clean
only
with
a
soft,
dry
cloth.
If
necessary,
slightly
moisten
the
cloth.
Do
not
use
abrasive
cleaners,

cleaning
alcohol,
paint
thinners,
wax,
solvents,
cleaning
fluids,
or
chemical- impregnated
wiping
cloths. Location ●




To
avoid
deformation,
discoloration,
or
other
serious
damage,
do
not
expose
this
unit
to
the
following
conditions:


































Shenzhen
Flamma
Innovation
Co.,
Ltd.














02www.flammainnovation.com


































Shenzhen
Flamma
Innovation
Co.,
Ltd.














03www.flammainnovation.com ●




Direct
sunlight

































































●



Extreme
temperature
or
humidity ●




Excessive
dusty
or
dirty
location




























●



Magnetic
fields ●




High
humidity
or
moisture







































●


Strong
vibrations
or
shocks Operating ●
Please
do
not
press
the
power
switch
or
control
knobs
heavily. ●
Please
do
not
let
scraps
of
paper,
metal
or
any
other
objects
be
thrown
into
the
device. ●
Please
do
not
let
the
device
fall
from
height,
push,
or
hit
the
device
heavily. Warning Please
do
not
disassemble,
modify
the
unit
to
avoid
warranty.
Please
contact
the
FLAMMA
support
team
directly
for
repairing
service.
LAYOUT Intelligent
knob USB
Type-C
port
3.5mm
headphone
output 6.35mm
guitar
line/headphone
output Charging
indicator Battery
compartment 1 2 3 4 5 6 6 1


































Shenzhen
Flamma
Innovation
Co.,
Ltd.














04www.flammainnovation.com 5 4 3 2 QUICK
TOUR 1.Connection Please
set
up
the
connection
according
to
the
diagram
below,

connect
your
FLAMMA
guitar
to
the amplifier/audio
interface/mobile
device.



































Shenzhen
Flamma
Innovation
Co.,
Ltd.














05www.flammainnovation.com oror Power
On/Off Rotate
the
intelligent
knob
clockwise
until
a
"click′′is
heared
to
turn
On
the
guitar,
the
knob
LED
will
illuminate;
rotate
the
intelligent
knob
counterclockwise
until
a
"click′′
is
heard
to
turn
Off
the
guitar,
the
knob
LED
will
be
Off.

Battery
maintaining Charging:
If
the
LED
of
the
intelligent
knob
blinks
quickly
or
turns
Off
immediately
during
playing,
please
charge
the
FLAMMA
guitar
as
soon
as
possible.
A
power
supply
which
can
meets
the
power
requirement
of
the
guitar
is
recommended
for
plugging
into
the
type-C
USB
port
for
charging.
The
charging
indicator
will
turn
RED
during
charging,
and
turn
GREEN
when
the
charging
is
complete.

Replacement:
The
battery
is
removeable.
Rotate
the
screw
on
the
battery
compartment
counterclockwise
to
loose
it
and
remove
the
battery.
The
replacement
battery
meeting
the
power
requirement
of
the
guitar
is
recommended
installing.



































Shenzhen
Flamma
Innovation
Co.,
Ltd.














06www.flammainnovation.com INSTRUCTIONS ●




FLAMMA
App FLAMMA
intelligent
guitar
comes
with
the
App
for
preset
editing
and
accessing
the
FLAMMA
Cloud.
Please
download
the
App
from
Appstore(iOS),
Play
store(Android),
or
the
FLAMMA
official
download
page.
●




Bluetooth
playback Open
the
Bluetooth
menu
of
your
mobile
device,

search
for
the
FLAMMA
intelligent
guitar
to
connect
it.
Then
users
can
play
audio
tracks
from
a
mobile
device
mixed
with
the
FLAM…

Text truncated - open the document above for the full version.

Rev 1/26/2023 Shenzhen Flamma Innovation Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 3/21/2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BA4I-E1000 [Shenzhen Flamma Innovation Co., Ltd.] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signed: Printed name: Jason Zhang Title: General manager Company Name: Shenzhen Flamma Innovation Co., Ltd. Rev 1/26/2023 Shenzhen Flamma Innovation Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 3/21/2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BA4I-E1000 [Shenzhen Flamma Innovation Co., Ltd.] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List(as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Signed: Printed name: Jason Zhang Title: General manager Company Name: Shenzhen Flamma Innovation Co., Ltd.

Shenzhen Flamma Innovation Co., Ltd. U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: Mar-22-2024 Ref: Attestation Statement – Part2.911(d)(7) filing FCC ID: 2BA4I-E1000 Shenzhen Flamma Innovation Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, THREE STONES MEDIA LLC(“the agent”) is our designated U.S. agent for service of process for the abovereference FCC ID. The applicant accepts to maintain an agent for service of process in the United States forno less than one year after either the grantee has permanently terminated all marketing and importation of theapplicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicialproceeding involving the equipment, whichever is later. The applicant further acknowledges it is ourresponsibility to inform the FCC whenever the agent information changes. THREE STONES MEDIA LLC ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: THREE STONES MEDIA LLC FRN: 0033401761 GC: 2A99E Address: 1200 Broadway St. APT 329, Los Angeles, CA90015 Signature: Contact Person: Sijie Zhang Tel: +1 267 909 3692 Email: [email protected] Signature: Applicant Company Name: Shenzhen Flamma Innovation Co., Ltd. FRN: 0033745316 Address: 6F-2, Unit A, Jinghang Electronic, Xingdong 71 District, Xin'an Street, Bao'an, Shenzhen, China Contact Person:Jason Zhang Tel: 18682315284 Email:[email protected]

Shenzhen Flamma Innovation Co., Ltd. 2024-03-21 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BA4I-E1000 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint Shenzhen Alpha Product Testing Co., Ltd. Address: Building i, No.2, Lixin Road, Fuyong Street, Bao’an District, 518103, Shenzhen, Guangdong, China Person: Mark Zhu (Name: Shenzhen Alpha Product Testing Co., Ltd. and address: Building i, No.2, Lixin Road, Fuyong Street, Bao’an District, 518103, Shenzhen, Guangdong, China). to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by TMICO still resides with Shenzhen Flamma Innovation Co., Ltd. Address: 6F-2, Unit A, Jinghang Electronic, Xingdong 71 District, Xin’an Street, Bao’an, Shenzhen, China (applicant name and address). Signature: Name Jason Zhang Position General manager Company Name Shenzhen Flamma Innovation Co., Ltd. Address 6F-2, Unit A, Jinghang Electronic, Xingdong 71 District, Xin’an Street, Bao’an, Shenzhen, China Tel +86-15999576346 Fax / Email [email protected]

Shenzhen Flamma Innovation Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: March 21, 2024 Subject; Request for Long Term Confidentiality FCC ID: 2BA4I-E1000 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: March 21, 2024 Name Jason Zhang Position General manager Company Name Shenzhen Flamma Innovation Co., Ltd. Address 6F-2, Unit A, Jinghang Electronic, Xingdong 71 District, Xin’an Street, Bao’an, Shenzhen, China Tel +86-15999576346 Fax / Email [email protected]

Differences Description We Shenzhen Flamma Innovation Co., Ltd. state: Product name: Intelligent Guitar Model: F100, E1000, E1100, E1200, E1010, E1110, E1210, E1020, E1120, E1220, E1030, E1130, E1230, E1040, E1140, E1240, E1050, E1150, E1250, SR1000, SR1100, SR1200, SR1010, SR1110, SR1210, SR1020, SR1120, SR1220, SR1030, SR1130, SR1230, SR1040, SR1140, SR1240, SR1050, SR1150, SR1250, WA1000, WA1100, WA1200, WN1000, WN1100, WN1200, WE1000, WE1100, WE1200, QA1000, QA1100, QA1200, QN1000, QN1100, QN1200, QE1000, QE1100, QE1200 There is no difference except the appearance. All circuits, power supplies, and components are the same Signature: March 21, 2024 Name Jason Zhang Position General manager Company Name Shenzhen Flamma Innovation Co., Ltd. Address 6F-2, Unit A, Jinghang Electronic, Xingdong 71 District, Xin’an Street, Bao’an, Shenzhen, China Tel +86-15999576346 Fax / Email [email protected]

FCC ID: 2BA4I-E1000 FCC ID: 2BA4I-E1000 FCC ID: 2BA4I-E1000 FCC ID: 2BA4I-E1000 FCC ID: 2BA4I-E1000

4.5cm 2.5cm Label Location FCC ID: 2BA4I-E1000 Shenzhen Flamma Innovation Co., Ltd. Product name: Intelligent Guitar This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC ID: 2BA4I-E1000 FCC ID: 2BA4I-E1000 FCC ID: 2BA4I-E1000 FCC ID: 2BA4I-E1000 FCC ID: 2BA4I-E1000 FCC ID: 2BA4I-E1000 FCC ID: 2BA4I-E1000 FCC ID: 2BA4I-E1000 FCC ID: 2BA4I-E1000 FCC ID: 2BA4I-E1000 FCC ID: 2BA4I-E1000 BT ANT 2.4G ANT FCC ID: 2BA4I-E1000 FCC ID: 2BA4I-E1000 FCC ID: 2BA4I-E1000 FCC ID: 2BA4I-E1000 FCC ID: 2BA4I-E1000 FCC ID: 2BA4I-E1000 FCC ID: 2BA4I-E1000

FCC ID: 2BA4I-E1000 RF Exposure evaluation According to 447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Worse case is as below: [2480MHz: 0.315dBm (1.075mW) output power], [2415MHz: 1.501dBm (1.413mW) output power], (1.075mW /5mm)·[√2.480(GHz)]+(1.413mW /5mm)·[√2.415(GHz)]= 0.778<3.0 for 1-g SAR Then SAR evaluation is not required

ALPHA's reports is using a digital certificate that is trusted on Adobe's official server. If there is no digital certificate or the digital certificate shows damaged in your report. Please do not accept the report. E-mail: [email protected] Tel: 4008-3008-95 Website: http://www.a-lab.cn FCC TEST REPORT FCC ID: 2BA4I-E1000 On Behalf of Shenzhen Flamma Innovation Co., Ltd. Intelligent Guitar Model No.: See model list Prepared for : Shenzhen Flamma Innovation Co., Ltd. Address : 6F-2, Unit A, Jinghang Electronic, Xingdong 71 District, Xin'an Street, Bao'an, Shenzhen, China Prepared By : Shenzhen Alpha Product Testing Co., Ltd. Address : Building i, No.2, Lixin Road, Fuyong Street, Bao’an District, 518103, Shenzhen, Guangdong, China Report Number : A2304292-C01-R07 Date of Receipt : August 22, 2023 Date of Test : August 22, 2023 –March 12, 2024 Date of Report : March 12, 2024 Version Number : V0 Result Pass Page 2 of 41 Report No.: A2304292-C01-R07 TABLE OF CONTENTS Description Page _Toc161733937 1. Summary of Standards And Results ------------------------------------------------------------ 6 1.1. Description of Standards and Results ----------------------------------------------------- 6 2. General Information ---------------------------------------------------------------------------------- 7 2.1. Description of Device (EUT) ----------------------------------------------------------------- 7 2.2. Accessories of Device (EUT) ---------------------------------------------------------------- 8 2.3. Tested Supporting System Details---------------------------------------------------------- 8 2.4. Block Diagram of connection between EUT and simulators ------------------------- 8 2.5. Test Mode Description ------------------------------------------------------------------------- 8 2.6. Test Conditions ---------------------------------------------------------------------------------- 9 2.7. Test Facility --------------------------------------------------------------------------------------- 9 2.8. Measurement Uncertainty -------------------------------------------------------------------- 9 2.9. Test Equipment List--------------------------------------------------------------------------- 10 3. Spurious Emission -----------------------------------------------------------------------------------11 3.1. Test Limits --------------------------------------------------------------------------------------- 11 3.2. Test Procedure --------------------------------------------------------------------------------- 11 3.3. Test Setup --------------------------------------------------------------------------------------- 12 3.4. Test Results------------------------------------------------------------------------------------- 13 4. Power Line Conducted Emission -------------------------------------------------------------- 23 4.1. Test Limits --------------------------------------------------------------------------------------- 23 4.2. Test Procedure --------------------------------------------------------------------------------- 23 4.3. Test Setup --------------------------------------------------------------------------------------- 23 4.4. Test Results------------------------------------------------------------------------------------- 23 5. Conducted Maximum peak Output Power -------------------------------------------------- 26 5.1. Test limits ---------------------------------------------------------------------------------------- 26 5.2. Test Procedure --------------------------------------------------------------------------------- 26 5.3. Test Setup --------------------------------------------------------------------------------------- 26 5.4. Test Results------------------------------------------------------------------------------------- 26 6. Peak Power Spectral Density ------------------------------------------------------------------- 27 6.1. Test limits ---------------------------------------------------------------------------------------- 27 6.2. Test Procedure --------------------------------------------------------------------------------- 27 6.3. Test Setup --------------------------------------------------------------------------------------- 27 6.4. Test Results------------------------------------------------------------------------------------- 27 7. Bandwidth ---------------------------------------------------------------------------------------------- 30 7.1. Test limits ---------------------------------------------------------------------------------------- 30 7.2. Test Procedure --------------------------------------------------------------------------------- 30 7.3. Test Setup --------------------------------------------------------------------------------------- 30 7.4. Test Results------------------------------------------------------------------------------------- 30 8. Band Edge Check ----------------------------------------------------------------------------------- 34 8.1. Test limits ---------------------------------------------------------------------------------------- 34 8.2. Test Procedure --------------------------------------------------------------------------------- 34 8.3. Test Setup --------------------------------------------------------------------------------------- 34 8.4. Test Results------------------------------------------------------------------------------------- 34 9. Antenna Requirement ----------------------------------------------------------------------------- 38 9.1. Standard Requirement ----------------------------------------------------------------------- 38 9.2. Antenna Connected Construction -------------------------------------------------------- 38 9.3. Results ------------------------------------------------------------------------------------------- 38 Page 3 of 41 Report No.: A2304292-C01-R07 10. Test setup photo ------------------------------------------------------------------------------------- 39 10.1. Photo of Radiated Emission test --…

Text truncated - open the document above for the full version.

ALPHA's reports is using a digital certificate that is trusted on Adobe's official server. If there is no digital certificate or the digital certificate shows damaged in your report. Please do not accept the report. E-mail: [email protected] Tel: 4008-3008-95 Website: http://www.a-lab.cn FCC TEST REPORT FCC ID: 2BA4I-E1000 On Behalf of Shenzhen Flamma Innovation Co., Ltd. Intelligent Guitar Model No.: See model list Prepared for : Shenzhen Flamma Innovation Co., Ltd. Address : 6F-2, Unit A, Jinghang Electronic, Xingdong 71 District, Xin'an Street, Bao'an, Shenzhen, China Prepared By : Shenzhen Alpha Product Testing Co., Ltd. Address : Building i, No.2, Lixin Road, Fuyong Street, Bao’an District, 518103, Shenzhen, Guangdong, China Report Number : A2304292-C01-R09 Date of Receipt : August 22, 2023 Date of Test : August 22, 2023 – March 13, 2024 Date of Report : March 13, 2024 Version Number : V0 Result Pass Page 2 of 45 Report No.: A2304292-C01-R09 TABLE OF CONTENTS Description Page 1. Summary of Standards And Results ------------------------------------------------------------ 6 1.1. Description of Standards and Results ----------------------------------------------------- 6 2. General Information ---------------------------------------------------------------------------------- 7 2.1. Description of Device (EUT) ----------------------------------------------------------------- 7 2.2. Accessories of Device (EUT) ---------------------------------------------------------------- 8 2.3. Tested Supporting System Details---------------------------------------------------------- 8 2.4. Block Diagram of connection between EUT and simulators ------------------------- 8 2.5. Test Mode Description ------------------------------------------------------------------------- 8 2.6. Test Conditions ---------------------------------------------------------------------------------- 9 2.7. Test Facility --------------------------------------------------------------------------------------- 9 2.8. Measurement Uncertainty -------------------------------------------------------------------- 9 2.9. Test Equipment List--------------------------------------------------------------------------- 10 3. Spurious Emission -----------------------------------------------------------------------------------11 3.1. Test Limits --------------------------------------------------------------------------------------- 11 3.2. Test Procedure --------------------------------------------------------------------------------- 11 3.3. Test Setup --------------------------------------------------------------------------------------- 12 3.4. Test Results------------------------------------------------------------------------------------- 13 4. Power Line Conducted Emission -------------------------------------------------------------- 27 4.1. Test Limits --------------------------------------------------------------------------------------- 27 4.2. Test Procedure --------------------------------------------------------------------------------- 27 4.3. Test Setup --------------------------------------------------------------------------------------- 27 4.4. Test Results------------------------------------------------------------------------------------- 27 5. Conducted Maximum peak Output Power -------------------------------------------------- 30 5.1. Test limits ---------------------------------------------------------------------------------------- 30 5.2. Test Procedure --------------------------------------------------------------------------------- 30 5.3. Test Setup --------------------------------------------------------------------------------------- 30 5.4. Test Results------------------------------------------------------------------------------------- 30 6. Peak Power Spectral Density ------------------------------------------------------------------- 31 6.1. Test limits ---------------------------------------------------------------------------------------- 31 6.2. Test Procedure --------------------------------------------------------------------------------- 31 6.3. Test Setup --------------------------------------------------------------------------------------- 31 6.4. Test Results------------------------------------------------------------------------------------- 31 7. Bandwidth ---------------------------------------------------------------------------------------------- 34 7.1. Test limits ---------------------------------------------------------------------------------------- 34 7.2. Test Procedure --------------------------------------------------------------------------------- 34 7.3. Test Setup --------------------------------------------------------------------------------------- 34 7.4. Test Results------------------------------------------------------------------------------------- 34 8. Band Edge Check ----------------------------------------------------------------------------------- 38 8.1. Test limits ---------------------------------------------------------------------------------------- 38 8.2. Test Procedure --------------------------------------------------------------------------------- 38 8.3. Test Setup --------------------------------------------------------------------------------------- 38 8.4. Test Results------------------------------------------------------------------------------------- 38 9. Antenna Requirement ----------------------------------------------------------------------------- 42 9.1. Standard Requirement ----------------------------------------------------------------------- 42 9.2. Antenna Connected Construction -------------------------------------------------------- 42 9.3. Results ------------------------------------------------------------------------------------------- 42 Page 3 of 45 Report No.: A2304292-C01-R09 10. Test setup photo ------------------------------------------------------------------------------------- 43 10.1. Photo of Radiated Emission test ---------------…

Text truncated - open the document above for the full version.

FCC ID: 2BA4I-E1000 Photo of Radiated Emission test FCC ID: 2BA4I-E1000 Photo of Conducted Emission test