2BAG3MS1901MeituEve M

EveLab Insight - Eve M Skin Imaging Analysis System User Guide Contents Product Introduction Packing List Parts List Device Status Manual Safety Precautions Warranty/Repair Warranty Card Specifications Product Introduction MeituEve M is a professional skin analysis system. With built-in 5 spectra and 3 cameras, it can complete a skin analysis of more than 20 dimensions in 12 seconds, providing customers with an an accurate and comfortable skin analysis experience. Packing List Main device: 1 Unit Lens hood: 1 Piece Tablet base: 1 Piece Power adapter: 1 Piece User guide: 1 Copy Please use the original accessories. Official website: www.evelabinsight.com Parts List Ambient light Chin support Forehead support Type-C connector Power connector Standby Light Device Status Power on: The ambient lights on both sides are on for 3 seconds. The network is waiting to be connected: The ambient lights on both sides are flashing. The network is connected: The ambient lights on both sides are always on. Power off: The ambient lights on both sides are off. Manual I. Unboxing Guide 1. Take out the main device: Place the main device on the desktop according to the instructions on the box.(Please do not grasp forehead support or chin support and do not touch the color card on the back of the chin support). 2. Install lens hood: The hood contains magnets. Please attach the hood to the front of the main device according to the instructions below. The logo on the front of the hood should be parallel to the desktop. 3. Connect to the power supply: Connect the power cord to the power jack on the back of the main device." II Power and Connection 1. Power on: Short press the power button on the back of the main deivce. The ambient lights on both sides of the main device are on for 3 seconds, and there is a sound indicating that the booting has been completed. 2. Download: Open the App Store on your tablet and search for the app “EveLab Insight - Eve M”. Download and install it. 3. Log in: Open the app and log in with the store account and password. 4. Connect: Place the tablet close to the device and connect according to the prompts from the software interface. III Take Photos and Analyze Skin 1. Create profile: Create a profile for customers according to the prompts in the software interface. 2. Clean: Wipe the front of the forehead support and chin support with a cotton alcohol pad. (Do not let alcohol or other liquids touch the color card on the back of the chin support) 3. Prepare to take photos: After the customer cleans their face, make sure their face is not blocked by bangs, jewelry, glasses, or any other items. Then, have the customer sit in front of the device with their chin resting on the chin support and forehead resting on the forehead support, making sure their head is straight and eyes are closed. The operator should then cover the customer's head with the lens hood and ensure only the customer’s face is displayed on the screen before taking photos. 4. Take photos and analyze skin: The operator conducts the skin detection according to the prompts in the software interface. 5. Explain the report: After the skin detection is completed, the operator can show and explain the skin analysis report to the customer via your tablet. 6. Power off: Short press the power button. IV. Maintenance Instructions 1. Before each detection, the operator needs to use a cotton alcohol pad to wipe the front of the forehead support and chin support to ensure the cleanliness of the device for each customer. 2. The casing for the device is made from environmentally-friendly materials. If it needs cleaned, please wipe it with an alcohol pad. ※Caution: Do not touch the lens or the color card on the back of the chin support with fingers or alcohol pads. 3. Please keep the detection camera and luminaire clean. Otherwise, the performance of the product may be adversely affected. " Safety Precautions The precautions herein are to ensure proper use of the device and prevent personal injury and property damage to users and others. Please strictly follow the precautions. 1. Only use the original Eve M power adapter with this product. Otherwise, power related problems or damage to the device may occur; 2. During use, keep the power plug securely attached to the power outlet and make sure it is easily accessible to plug and unplug; 3. If the power adapter is used incorrectly, the power cord may break. Do not use the device if the power cord is twisted and cannot be restored, or if the power cord or the power connector is damaged, deformed or broken; 4. When the device is not in use for long period of time, store the device in a dry, dark, cool place and avoid contact with hard objects so as not to damage the product; 5. Do not store the product and its accessories in a humid environment for a long period of time. Otherwise, the performance of the product may be adversely affected; 6. Please keep this device away from any heat sources or open flames; 7. Do not immerse the device in water or rinse with water; 8. Please store the device in a place that is out of reach of children; 9. Do not disassemble, repair, or rebuild this device without authorization; 10. Do not unplug the power cord while the power is on. 11. This product is a precision instrument, please do not rough handling, vibration, knocking this product, so as not to cause damage." This device contains strong magnets. The following individuals (including but not limited to) should not use this product: 1. recipients of pacemaker surgery; 2. those that are suffering or have suffered from retinal detachment; 3. those with facial implants, metal or otherwise, due to fractures, plastic surgery, etc.; 4. those with residual effects of head or eye injuries due to traffic accidents, etc.; 5. those with doctor's orders to refrain from contact with strong magnetic force. Warranty/Repair I. Starting from the date of purchase, a one-year warranty service is provided upon presentation o…

Text truncated - open the document above for the full version.

EVELAB INSIGHT (SINGAPORE) PTE. LTD. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: EVELAB INSIGHT (SINGAPORE) PTE. LTD. Address: 80 Robinson Road #02-00 Singapore 068898 Product Name: MeituEve M FCC ID: 2BAG3MS1901 Model(s): MS1901 2.911(d)(5)(i) Equipment Type We, [EVELAB INSIGHT (SINGAPORE) PTE. LTD.] (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Arthur Law Date: 2023.03.28 Title and Company name: General Counsel / EVELAB INSIGHT (SINGAPORE) PTE. LTD. NOTE 1 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

EVELAB INSIGHT (SINGAPORE) PTE. LTD. 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: EVELAB INSIGHT (SINGAPORE) PTE. LTD. Address: 80 Robinson Road #02-00 Singapore 068898 Product Name: MeituEve M FCC ID: 2BAG3MS1901 Model(s): MS1901 2.911(d)(5)(ii) Applicant filing We, [EVELAB INSIGHT (SINGAPORE) PTE. LTD.] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Arthur Law Date: 2023.03.28 Title and Company name: General Counsel / EVELAB INSIGHT (SINGAPORE) PTE. LTD. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

FCC Software Configuration Control Declaration Rev1.1 EVELAB INSIGHT (SINGAPORE) PTE. LTD. FCC Software Configuration Control Declaration Date: March 15, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product Name: MeituEve M Model Number: MS1901 Regarding FCC Country Code Selection guidelines identified in KDB 594280. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Arthur Law Date: March 28, 2023 Title: General Counsel Signature of applicant

EVELAB INSIGHT (SINGAPORE) PTE. LTD. Agent Authorization Company: EVELAB INSIGHT (SINGAPORE) PTE. LTD. Address: 80 Robinson Road #02-00 Singapore 068898 Product Name: MeituEve M Model Number(s): MS1901 Product Description: MeituEve M We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023.03.28 Name: Arthur Law Title: General Counsel Company: EVELAB INSIGHT (SINGAPORE) PTE. LTD.

EVELAB INSIGHT (SINGAPORE) PTE. LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: March 28, 2023 Subject; Request for Confidentiality FCC ID: 2BAG3MS1901 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure FCC Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Arthur Law Title: General Counsel

EUT PHOTO(External Photos) FCC ID: 2BAG3MS1901

Page 1 of 1 Label and Information FCC Label Sample FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

EUT PHOTO(Internal Photos) FCC ID: 2BAG3MS1901 ※※※※※ END OF REPORT ※※※※※ BT+Wi-Fi ANT Wi-Fi ANT

FCC ID: 2BAG3MS1901 R F Exposure Evaluation Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) W here Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm P d id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Test Result of RF Exposure Evaluation BLE Mode Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result GFSK -0.23 11.967 0.0004 1.0 PA SS 2. 4G Wi-Fi Mode Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result A N T. 1 10.37 22.803 0.0045 1.0 PA SS AN T. 2 9.69 19.498 0.0039 1.0 PA SS 5. 2G Wi-Fi Mode Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result A N T. 1 6.95 10.544 0.0021 1.0 PA SS AN T. 2 7.04 10.765 0.0021 1.0 PA SS 5.8G Wi-Fi Mode Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result A N T. 1 6.38 9.247 0.0018 1.0 PA SS AN T. 2 6.26 8.995 0.0018 1.0 PA SS Max Sum Power Density at R=20cm: 0.0004+0.0045+0.0039=0.0088 Remark : 2.4G antenna gain=3.21dBi, 5G antenna gain=3.28dBi so a simultaneous transmission SAR test is not required.

ProjectNo.: ZKT-230220L0873E-3 Page 1 of 95 TEST REPORT FCC ID:2BAG3MS1901 ReportNumber.....................................:ZKT-230220L0873E-3 Dateof Test.......................................................:March3, 2023to March7, 2023 Dateof issue ......................................... :March10, 2023 Totalnumberof pages .......................... 95 Test Result............................................: PASS TestingLaboratory. ........................... : ShenzhenZKT TechnologyCo., Ltd. Address...............................................: 1/F, No. 101, BuildingB, No. 6, TangweiCommunityIndustrial Avenue,FuhaiStreet,Bao'anDistrict,Shenzhen,China Applicant'sname.............................: EVELABINSIGHT(SINGAPORE)PTE. LTD. Address ............................................... : 80 RobinsonRoad#02-00Singapore068898 Manufacturer's name ...................... : XiamenMeituEveTechnologyCo., Ltd. Address ............................................... : Room568, No.942,Tonglong2nd Road,GaoxinDistrict(Xiang'an) Industries,Xiamen,China Test specification: Standard................................................: FCCCFR Title 47 Part 15 SubpartC Section15. 407 ANSIC63.10:2013 KDB789033D02 v01r02 RSS-247Issue2 RSS-GenIssue5 Test procedure ..................................... : / Non-standardtest method ................ :N/A Test ReportForm No........................: TRF-EL-113_V0 Test ReportForm(s)Originator.....: ZKT Testing MasterTRF........................................: Dated:20 20 -0 1-06 This devicedescribedabovehas beentestedby ZKT,and the test resultsshowthat the equipmentunder test (EUT)is in compliancewith the FCCrequirements.And it is applicableonly to the testedsample identifiedin the report. This reportshallnot be reproducedexceptin full, withoutthe writtenapprovalof ZKT,this documentmay be alteredor revisedby ZKT,personalonly, and shallbe notedin the revisionof the document. Productname.......................................:MeituEveM Trademark...........................................:EveLabInsight Model/Typereference ......................... : MS1901 Ratings .................................................. :DC 12V/5Aby adapter ProjectNo.: ZKT-230220L0873E-3 Page 2 of 95 Testingprocedureand testinglocation: TestingLaboratory..........................................:ShenzhenZKT TechnologyCo., Ltd. Address............................................................:1/F, No. 101, BuildingB, No. 6, TangweiCommunity IndustrialAvenue,FuhaiStreet,Bao'anDistrict, Shenzhen,China Alen HeTestedby (name+ signature) ....................... : Joe LiuReviewer(name+ signature) ....................... : LakeXie Approved(name+ signature).......................: ProjectNo.: ZKT-230220L0873E-3 Page 3 of 95 Table of ContentsPage 1. VERSION5 2. SUMMARYOF TEST RESULTS6 2.1 TESTFACILITY7 2.2 MEASUREMENTUNCERTAINTY7 3. GENERALINFORMATION8 3.1 GENERALDESCRIPTIONOF EUT8 3.3 BLOCKDIGRAMSHOWINGTHE CONFIGURATIONOF SYSTEMTESTED10 3.4 DESCRIPTIONOF SUPPORTUNITS(CONDUCTEDMODE)10 3.5 EQUIPMENTSLISTFOR ALL TESTITEMS10 4. EMC EMISSIONTEST13 4.1 CONDUCTEDEMISSIONMEASUREMENT13 4.1.1POWERLINECONDUCTEDEMISSIONLIMITS13 4.1.2TESTPROCEDURE13 4.1.3DEVIATIONFROMTESTSTANDARD13 4.1.4TESTSETUP14 4.1.5EUT OPERATINGCONDITIONS14 4.1.6TESTRESULT:15 4.2 RADIATEDEMISSIONMEASUREMENT17 4.2.1APPLICABLESTANDARD17 4.2.2CONFORMANCELIMIT17 4.2.3MEASURINGINSTRUMENTS17 4.2.4TESTCONFIGURATION18 4.2.5TESTPROCEDURE19 4.2.6TESTRESULT20 5. POWERSPECTRALDENSITYTEST26 5.1 APPLIEDPROCEDURES/ LIMIT26 5.2 TESTPROCEDURE27 5.3 DEVIATIONFROMSTANDARD27 5.4 TESTSETUP27 5.5 EUT OPERATIONCONDITIONS27 5.6 TESTRESULTS28 6. 26DB & 6DB &99% EMISSIONBANDWIDTH39 6.1 APPLIEDPROCEDURES/ LIMIT39 6.2 TESTPROCEDURE39 6.3 EUT OPERATIONCONDITIONS39 6.4 TESTRESULTS40 7. MAXIMUMCONDUCTEDOUTPUTPOWER56 ProjectNo.: ZKT-230220L0873E-3 Page 4 of 95 Table of ContentsPage 7.1 PPLIEDPROCEDURES/ LIMIT56 7.2 TESTPROCEDURE56 7.3 DEVIATIONFROMSTANDARD57 7.4 TESTSETUP57 7.5 EUT OPERATIONCONDITIONS57 7.6 TESTRESULTS58 8.OUTOF BANDEMISSIONS59 8.1 APPLICABLESTANDARD59 8.2 TESTPROCEDURE59 8.3 DEVIATIONFROMSTANDARD59 8.4 TESTSETUP59 8.5 EUT OPERATIONCONDITIONS60 8.6 TESTRESULTS60 9. SPURIOUSRF CONDUCTEDEMISSIONS70 9.1 CONFORMANCELIMIT70 9.2 MEASURINGINSTRUMENTS70 9.3 TESTSETUP70 9.4 TESTPROCEDURE70 9.5 TESTRESULTS70 10. FREQUENCYSTABILITYMEASUREMENT83 10.1 LIMIT83 10.2 TESTPROCEDURES83 10.3 TESTSETUPLAYOUT83 10.4 EUT OPERATIONDURINGTEST83 10.5 TESTRESULTS83 11. ANTENNAREQUIREMENT94 12. TEST SETUPPHOTO95 13. EUT CONSTRUCTIONALDETAILS95 ProjectNo.: ZKT-230220L0873E-3 Page 5 of 95 1. VERSION ReportNo.VersionDescriptionApproved ZKT-230220L0873E-3Rev.01Initialissueof reportMarch10, 2023 ProjectNo.: ZKT-230220L0873E-3 Page 6 of 95 2.SUMMARYOF TEST RESULTS Test proceduresaccordingto the technicalstandards: FCCPart15(15. 407 ), SubpartE RSS-247Issue2 Standard Section Test ItemJudgmentRemark FCCpart 15.209(a), FCCpart 15.407(b)(1) FCCpart 15.407(b)(4) FCCpart 15.407(b)(8) SpuriousRadiatedEmissionsPASS FCCpart 15.207 RSS-GenSection8.8 ConductedEmissionPASS FCCpart 15.407(a)(12) RSS-247 Section5.2(a) RSS-GenSection6. 7 26 dB and 99% EmissionBandwidthPASS FCCpart 15.407(e)6 dB bandwidthPASS FCCpart 15.407(a)(1) FCCpart 15.407(a)(3) RSS-247Section5.4 (d) MaximumConductedOutputPowerPASS FCCpart 15.407(b)(1) FCCpart 15.407(b)(4) RSS-247Section5.5 BandEdgePASS FCCpart 15.407(a)(1) FCCpart 15.407(a)(3) RSS-247 Section5.2(b) PowerSpectralDensityPASS 2.1051, FCCpart 15.407(b) SpuriousEmissionsat AntennaTerminalsPASS FCCpart 15.203 RSS-GenSection6.8 AntennaRequirementPASS NOTE: (1) ” N/A ” denotestest is not applicablein this Test Report ProjectNo.: ZKT-230220L0873E-3 Page 7 of 95 2.1 TESTFACILITY ShenzhenZKT TechnologyCo., Ltd. Add.: 1/F, No. 101, BuildingB, No. 6, TangweiCommunityIndustrialAvenue,FuhaiStreet,Bao'an District,Shenzhen,China FCCTest Firm RegistrationNumber:692225 DesignationNumber:CN1299 IC RegisteredNo.: 27033 DesignationNumber:CN0110 2.2 MEASUREMENTUNCERTAINTY The report…

Text truncated - open the document above for the full version.

承认书项目表 内容 页数页码 NO. （ Number （ Page （ Contents ） ofPage ） Code ） 1 承认书封面（SpecCover） 11 2 承认书项目表（SpecItem） 12 3 工程成品图（ Drawing ） 13 4 电性测试报告（TestReports） 14 5 S 参数测试（ SParameter ） 15 6 增益测试（GainTest） 16 7 8 9 10 --- 11--- 12--- Tel:15818375487 DESCRIPTION SIGN DATE APPROVER D C B YD 2014-03-18 SCALE: 1/1 UNITS: mmREVISION: A APPROVED BY Tolerance TITLE:WIFI ANTENNA PART NO.: MX2400G-081B-225LX DWG NAME: CHECKED BY DESIDNED BY ±3° X°X.X ±0.20X.XX ±0.10 FPC 50*14*0.1mm O.D. 0.81mm Black IPEX(U.FL/IPX) Part Number Name MX2400G-081B FPC R-CB-081B Coaxial CableConnector CI-113 1 No. 2 3 1 1 Q'ty 1 Material leon 2014-03-18 jeff 2014-03-18 点 225 3mm 电性测试报告 Tes tReports ElectricalProperties Frequency2.4~2.5GHz Impedance50 0hm Nominal V.S.W.R1.92 : 1 Max Return Loss-10 dB Max RadiationOmni-directional Gain (Peak) Cable LossdB / m Max @ 2450 MHz PolarizationLinear, Vertical Admitted Power1 W Connectoripex PhysicalProperties An tenna MaterialFPC Cable TypeO.D. 1.13mm // 105 mm Operating Temp.-10 ~ +60 ̊C Storage Temp. -10 ~ +70 ̊C Cable ColorBlack 1.5 4.9~5.9GHz Tel:15818375487 5G: 3.28dBi, 2.4G: 3.21dBi S 参数测试 SParameterTest AgilentE5071C Tel:15818375487 增益测试 GainTest Antenna Radiation Pattern VS Gain Tel:15818375487 附：OTA测试数据 Frequency=2400MHz Frequency=2450MHz Frequency=2500MHz Frequency=5150MHz Frequency=5200MHz Frequency=5250MHz Frequency=5700MHz Frequency=5775MHz Frequency=5850MHz phi=0° phi=90° theta=90°

EUT TEST PHOTO FCC ID: 2BAG3MS1901 Radiated band emission (30MHz-1GHz): Radiated band emission (Above 1GHz): Conducted emission: