2BAQQNOVABOT001Robotic mower

NOVABOT.COM N1000/N2000 *Please read the user manual carefully before using our product. User Manual 1 2 3 3 4 4 5 5 6 7 7 7 9 11 14 14 19 20 21 21 21 22 22 22 24 24 25 25 26 26 28 29 30 32 CONTENTS 1 INTRODUCTION 2 SAFETY INSTRUCTIONS 3 MY NOVABOT 3.1 Unboxing 3.2 Top View 3.3 Control Panel 3.4 Bottom view 3.5 Charging Station & Receiver Holder 3.6 Rear View - Symbols 4 SET UP YOUR NOVABOT 4.1 Download NOVABOT APP 4.2 Plan Your Installation Location 4.3 Assembly 4.4 Connect 5 MAPPING AND MOWING 5.1 Mapping 5.2 On-Demand Mowing 5.3 Schedule 6 ABOUT SECURITY 6.1 Watchdog Mode 6.2 PIN Code Protection 7 MAINTENANCE 7.1 Transportation 7.2 Cleaning 7.3 Replace Blades 7.4 Change Battery 7.5 Store 7.6 NOVABOT Device Update (OTA) 8 TROUBLESHOOTING AND FAULT MESSAGES 8.1 Troubleshooting 8.2 Fault Messages 9 SPECIFICATIONS 10 STATEMENTS 11 DISCLAIMERS 1 INTRODUCTION In the following section, we aim to explain how NOVABOT operates. Equipped with AI and multiple sensors, it can autonomously handle complex scenarios. 1 ENEN 6 PIN Code Protection The PIN code is used to prevent theft and unauthorized use. If the machine malfunctions or the STOP button is pressed, NOVABOT will lock and require the PIN code to unlock. Schedule You can set mowing and security schedules in the NOVABOT APP, allowing NOVABOT to automatically mow the lawn or activate watchdog mode based on the specified schedules. Watchdog Mode NOVABOT will initiate security patrols near the entrance as required. Obstacle Avoidance NOVABOT's AI cameras detect obstacles, preventing interference. Obstacle areas can be set in the NOVABOT App to avoid disruption of normal work. Auto Recharging If the battery is running low, NOVABOT will automatically pause the task and return to the charging station. Once fully charged, NOVABOT will either resume its unfinished mowing task or stay at the charging station, depending on its mowing schedule. Multi-map Mowing NOVABOT can mow multiple(currently up to three) lawns in succession, intelligently planning the mowing path for efficient completion. 2 Intelligent Mowing NOVABOT is capable of intelligent mowing, which involves using panoramic vision, inertial navigation, RTK GPS, and visual perception technology to achieve intelligent mapping, charging, mowing, and obstacle avoidance functions. Additionally, NOVABOT can adjust the mowing height to meet the personalized needs of our users. AI 2 SAFETY INSTRUCTIONS WARNING Who should not use this product 1. Do not let children, individuals with impairments, inexperienced people, or those unfamiliar with instructions use the machine. Local regulations may impose age restrictions on operators. 2. Do not allow children to be near or play with the machine while it is operating. Where this product cannot be used 1. Do not leave any objects in the work area that could cause damage to the product or injury to people. 2. Avoid damaging cords and contact with live parts by keeping supply and extension cords away from the mowing area. 3. Warning signs should be placed around the working area of the machine when it is used in public areas. They shall show the substance of the following text: "Warning! Automatic Lawnmower! Keep away from the machine! Supervise children!". When this product cannot be used 1. Avoid using the machine and its peripherals in inclement weather conditions, particularly when there is a risk of lightning. 2. Timely check the working area to remove any foreign objects that may damage the product or be damaged by the product. 3. Timely inspect the product to ensure it is in good condition. Never operate a machine with a defective guard, a worn blade, a damaged cord, or any missing parts. Do not connect a damaged cord to the power supply or touch a damaged cord before it is disconnected from the power supply. 4. Only use peripherals that come with the original product, such as the battery and charger. Using unofficial peripherals may result in unexpected outcomes. What should be done with this product 1. Recommend connecting the peripherals only to a supply circuit protected by a residual current device (RCD) with a tripping current of not more than 30 mA. 2. Turn off the product and remove the plug from the mains before the following operations. A.Lifting up the product or carrying it. B.Any assembly or disassembly of the machine that is allowed in this manual, such as changing blades and batteries. C.Clearing a blockage on the machine. D.Checking, cleaning or working on the machine or charging station. E.If the machine starts to vibrate abnormally, check for damage before restarting. 3. If abnormal vibrations occur, press the STOP button immediately and carefully inspect the product for any obstructions. Clear it and restart the product. Contact the service center if the vibration persists. 4. Only touch blades when it's totally stopped and wear anti-cut gloves before changing blades. 5. In the event of leakage of electrolyte from the battery flush with water and seek medical help if contact with skin or eye. What cannot be done to this product 1. Keep away from the product when it's working. Please make sure to keep your hands and feet away from the rotating blades. 2. Always be sure of footing on slopes, walk, and never run while operating the machine or its peripherals. 3. Do not place anything on top of the product or its charging station. 4. Avoid making any modifications to the product that could result in unforeseen outcomes. 5. Do not disassemble any component that is not specified in the manual. 6. Keep the battery in a secure location, away from any hazardous materials that could potentially cause issues, such as fire or water. Do not put the battery in a short-circuit condition. 7. Only use the detachable power supply unit provided with this appliance for recharging the battery. Please read all safety warnings and instructions carefully before performing any operation. These documents should be saved for future reference. Only use this pr…

Text truncated - open the document above for the full version.

Mapping the obstacle area •When mapping the obstacle area, maintain a distance of not less than 1 m from the obstacle boundary. 1 Open the 'Lawn' page in the NOVABOT APP, click 'Add area', select 'Obstacle,' and start scanning the obstacle area. 2Follow the APP's instructions to remotely control NOVABOT and map around the obstacle boundary. Ensure the starting and ending points coincide. 17 EN ATTENTION >1m >1m MapObstacleChannel Create map Build map Work map: Map001 Size: 234ft² SheduleStart mowing Add Area Mapping the channel area •When mapping the channel area, ensure that the width is not less than 1 m for narrow passages. •To ensure mowing accuracy, when mapping multiple working maps, maintain a distance of greater than 0.5 m between the maps. •When mapping the channel area, the straight-line distance between mowing areas should not exceed 10 m. 1 If you have 2 or more working maps, create a channel area to connect them. 2 Open the 'Lawn' page in the NOVABOT APP, click 'Add area', select 'Channel', and start scanning the channel area. 18 EN ATTENTION A B >0.5m MapObstacle Channel Create map >1m Build map Work map: Map001 Size: 234ft² SheduleStart mowing Add Area Map001 Map002 <10m 3. Follow the APP's instructions to remotely control NOVABOT, guiding it from one side of the channel area to the other side. Tips •When there are multiple map settings, the default is map001, 002, and so on. You can also rename it with up to 6 digits and letters. •Ensure that the identification mark on the charging station is not blocked or stained. •If you need to adjust your mowed or obstructed areas, you can edit/delete/add relevant areas in the 'Lawn' interface of the APP and then remap the area. 5.2 On-Demand Mowing •Before mowing, please remove obstacles. (e.g., outdoor items, toys, rocks, branches, etc.) •Keep the grass height below 11 cm before running NOVABOT.Grass over 11 cm may be recognized by NOVABOT as an obstacle, resulting in missed cutting. Please cut it manually first. 1Click "Start" on the main interface to enter the fast mowing. 2 Select the mowing height and working maps. 3Start mowing. Tips •NOVABOT requires 50% more power in front of the lawn. •If the power of NOVABOT is too low during mowing, it will automatically return to the charging station to charge and push the information to the APP. After the charging is completed, the lawnmower will continue to mow the grass until the mowing work on the map is complet- ed. 19 EN ATTENTION Cutting height2.2 inch work map All map CancelConfirm 5.3 Schedule 1. Open the "Schedule" interface in the NOVABOT APP. 2. Click the 'Add' button. 3. Set the working hours (mowing/security). 4. NOVABOT will start working (mowing/security) according to the set time. Tips •Mowing mode and watchdog mode cannot be carried out simultaneously. •Currently NOVABOT can only set a maximum of three time periods per day. (including mowing and security, including all maps). •If the power of NOVABOT is lower than 20% during work (mowing/security), it will automatically return to the charging station to recharge. After charging is complete, it will resume work from where it left off. •If the charging is completed during work, and the current time is not within the working schedule, the mowing/security will not continue. 20 EN Schedule Only three schedules are supported to create on the same day. MonTueWedThuFriSatSun Schedule Only three schedules are supported to create on the same day. MonTueWedThuFriSatSun 8:00-10:00(2h) Mowing Time , 2.2inch Tue,Wed,Thu,Fri Map 001 10:00-12:00(2h) Security Time Tue,Wed,Thu,Fri Mowing Time ConfirmCancel Working mapAll map 08:00 to 12:00 Never From Repeat Security Time Add schedule Cutting height2.2inch Schedule Map001 Only three schedules are supported to create on the same day. Mon 00:00 03:00 06:00 09:00 12:00 15:00 18:00 21:00 00:00 TueWedThuFriSatSun No Schedule! EN 6 ABOUT SECURITY 6.1 Watchdog Mode A. Watchdog function setting Open the schedule function of the APP, and set the watchdog mode for NOVABOT at the scheduled time. B. Set up the watching area When you start mapping in the app, NOVABOT will automatically set the area of 3.5 m near the center of the charging station as the watchdog area. Before installing the charging station, please confirm whether this range is your ideal watchdog area. •Patrol work and mowing work cannot be carried out simultaneously. Please plan the work schedule of NOVABOT reasonably. •If an obstacle area within the patrol range, NOVABOT will still automatically avoid obstacles during patrol work. •To keep the network stable when NOVABOT is working, the 3.5 m radius area is a fixed setting area, and you can not expand or shrink this area. Details can be viewed on the lawn management interface. •If you don't need this function, simply don't set the schedule in the NOVABOT APP. This operation does not impact daily mowing work. 6.2 PIN Code Protection 1. When you turn on NOVABOT for the first time, you need to set up the PIN through NOVABOT control panel manually. 2. When you forget your PIN code, you can check it on the personal information interface of the APP. 3. When you need to change the PIN code, press the 'settings' button on NOVABOT's control panel and select the 'Change PIN Code' function. 4. When NOVABOT shuts down automatically for some reason. Before restarting, you need to manually enter the PIN code on NOVABOT to start. 5. When the wrong PIN code is entered more than 5 times, NOVABOT will be automatically locked. You can enter the PIN again after 1 hour. •When changing the PIN code, please make sure NOVABOT is on and connected to the GPS and home Wi-Fi. •When using the APP to unlock NOVABOT, it needs to be turned on and the GPS and home Wi-Fi are connected normally. ATTENTION ATTENTION 21 EN 7 MAINTENANCE 7.1 Carry & Lift Guide •Turn off the product before raising or moving NOVABOT. •There are blades on the bottom of NOVABOT, so keep your body away from them. •To ensure your safety, plea…

Text truncated - open the document above for the full version.

Confidentiality Letter Date: 2023-10-12 Subject: Confidentiality Request for FCC ID: 2BAQQNOVABOT001 and IC ID: 30447-NOVABOT001 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality RequestedExhibit Short TermPermanentBlock Diagrams Short TermExternal Photos Short TermPermanentInternal Photos Short TermPermanentOperation Description/Theory of Operation Short TermPermanentPart List/Tune-Up Procedure Short TermPermanentSchematics Short TermTest Setup Photos Short TermPermanentanual Shenzhen LYF Intelligence Co., Ltd. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04- 1705. Sincerely, By: Rongtao Lu/Aftersales Director (Signature)(Print name/Title)

ModelDeclarationLetter ModelDifferences N1000Battery model: CZ-LYF6S2P-18650 N2000Battery model: CZ-LYF6S2P-21700 Remark: In electrical characteristics, two models are the same except for the size of the battery capacity. No differences in external appearance N1000, N2000 By: __________________________ _____Rongtao Lu_____________ (Signature)(Print name) _______Aftersales Director________+86 18114904983_________ (Title)(Telephone) On behalf of: __ Shenzhen LYF Intelligence Co., Ltd. __ (Company Name)

Photo Documentation Report Number: Attachment of CN23XAMH 001 Model:N1000, N2000 Page 1 of 7 External: Overview

Robotic mower: N1000 Rated voltage: 21.6V Cutting width: 22cm Net weight: 10.5kg Production: 2023 •Do not touch rotating blade • Berühren Sie nicht die rotierende Klinge •Ne touchez pas la lame rotative •No toque la hoja giratoria WARNING/WARNUNG/AVERTISSEMENT/ADVERTENCIA IPX5 IC: 30447-NOVABOT001 FCC ID: 2BAQQNOVABOT001 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. MADE IN CHINA Shenzhen LYF Intelligence Co., Ltd. NO.501 Building 1, Shenzhen Software Park Yuehai Street, Nanshan District, Shenzhen City, Guangdong P.R. China 83,0 Robotic mower: N2000 Rated voltage: 21.6V Cutting width: 22cm Net weight: 11.6kg Production: 2023 •Do not touch rotating blade • Berühren Sie nicht die rotierende Klinge •Ne touchez pas la lame rotative •No toque la hoja giratoria WARNING/WARNUNG/AVERTISSEMENT/ADVERTENCIA IPX5 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC: 30447-NOVABOT001 FCC ID: 2BAQQNOVABOT001 MADE IN CHINA Shenzhen LYF Intelligence Co., Ltd. NO.501 Building 1, Shenzhen Software Park Yuehai Street, Nanshan District, Shenzhen City, Guangdong P.R. China

Photo Documentation Report Number: Attachment of CN23XAMH 001 Model:N1000, N2000 Internal: Top of X3A board Internal: Bottom of X3A board Photo Documentation Report Number: Attachment of CN23XAMH 001 Model:N1000, N2000 Internal: Top of Motor board Internal: Bottom of Motor board Photo Documentation Report Number: Attachment of CN23XAMH 001 Model:N1000, N2000 WIFI&BLE Module WIFI&BLE Module without shield Photo Documentation Report Number: Attachment of CN23XAMH 001 Model:N1000, N2000 Antenna for AP 6212

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN23XBFF 001 Auftrags-Nr.: Order no.: 180256997 Seite 1 von 3 Page 1 of 3 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2023.02.17 Auftraggeber: Client: Shenzhen LYF Intelligence Co., Ltd. NO.501 Building 1, Shenzhen Software Park Yuehai Street, Nanshan District, Shenzhen City, Guangdong P.R. China Prüfgegenstand: Test item: Robotic mower Bezeichnung / Typ-Nr.: Identification /Type no.: N1000, N2000 Auftrags-Inhalt: Order content: TÜV Rheinland FCC & ISED Service Prüfgrundlage: Test specification: FCC 47 CFR Part 2.1091 RSS-102 Issue 5 Wareneingangsdatum: Date of sample receipt: 2023.05.22 Refer to Photo Documentation Prüfmuster-Nr.: Test sample no: A003478075 Prüfzeitraum: Testing period: 2023.06.12 - 2023.07.25 Ort der Prüfung: Place of testing: TÜV Rheinland / CCIC (Ningbo) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland / CCIC (Ningbo) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: genehmigt von: authorized by: Datum: Date: 2023.10.30 Ausstelldatum: Issue date: 2023.10.30 Stellung / Position: Keda Zhou/PEStellung / Position:Feng Liang//Authorizer Sonstiges / Other: FCC ID: 2BAQQNOVABOT001 ISED: 30447-NOVABOT001 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende:1 = sehr gut2 = gut3 = befriedigend4 = ausreichend5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n)F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbarN/T = nicht getestet * Legend:1 = very good2 = good3 = satisfactory4 = sufficient5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s)N/A = not applicableN/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. DieserBericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland / CCIC (Ningbo) Co., Ltd. 3F, building C13, R&D Park, No.32 Lane 299 Guanghua Road National Hi-Tech Zone, Ningbo 315048, P.R. China Mail: [email protected] · Web: www.tuv.com Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No.: CN23XBFF 001 Seite 2 von 3 Page 2 of 3 Radio Frequency Exposure Compliance 1. FCC Electromagnetic Fields Test Specification Test standard : FCC 47 CFR Part 2.1091 CFR47 FCC Part 1.1310 MPE Calculation: Mode Max Power (dBm) Max e.i.r.p. (mW) Distance (cm) Power Density (mW/ cm 2 ) Power Density Limit (mW/ cm 2 ) Verdict A 6.95 4.95 20 0.00098 1.0 Pass B 17.47 55.85 20 0.011 1.0 Pass Remark: Data comes from report CN23XAMH 001. Conclusion: EUT is compliance with the FCC RF exposure. Result: Pass Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No.: CN23XBFF 001 Seite 3 von 3 Page 3 of 3 2. IC Electromagnetic Fields Test Specification Test standard : RSS-102 Issue 5 RF exposure evaluation is required if the separation distance between the user and/or reater than 20 cm, except when the device operates as follows: At or above 300 MHz and below 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1.31 x 10 -2 0.6834 W (adjusted for tune-up s in MHz; RF exposure evaluation exempted power: 2.67W MPE Calculation: Mode Max Power (dBm) Max e.i.r.p. (mW) Distance (cm) Exemption Limits maximum e.i.r.p (W) Verdict A 6.95 4.95 20 2.67 Pass B 17.47 55.85 20 2.67 Pass Remark: Data comes from report CN23XAMH 001. Conclusion: EUT is compliance with the IC RF exposure. -- The END -- Result: Pass

2.4GHz FPC BUILT-IN ANTENNA TECHNICAL DATA SHEET DZP(TX2400-FPC-6615) VERSION：3.3 DATE：2023-10-08 TEL：028-61542639 WEBSITE：WWW.ZIISOR.COM CHENGDU ZIISOR TECHNOLOGY CO., LTD. EXPERT OF IOT ANTENNAS DZP(TX2400-FPC-6615) 1 / 4 Copyright@Chengdu Ziisor Technology Co., Ltd 2020 Expert of IoT Antenna DZP(TX2400-FPC-6615) NO. MECHANICAL SPECIFICATIONS VALUE COMMENT 01 Part Number DZP(TX2400-FPC-6615) Omni Antenna 02 Material FPC 03 Connector Type IPEX-1 04 Antenna Colour Black 05 Overall Size 66*15mm 06 Cable Length 180mm Cable Customizable 07 Weight 1g NO. ELECTRICAL SPECIFICATIONS VALUE COMMENT 01 Frequency 2.4GHz 2.4~2.5GHz 02 Antenna Gain 3.5dBi 03 Radiation type Omnidirectional 04 Polarization Linear Vertical 05 Nominal Impedance 50Ω 06 Max Input Power 2W 077 S.W.R. ≤1.5 NO. ENVIRONMENTAL SPECIFICATIONS VALUE COMMENT 01 Operation Temperature -30°C～+75°C 02 Storage Temperature -30°C～+75°C 03 RoHS Compliant YES DZP(TX2400-FPC-6615) 2 / 4 Copyright@Chengdu Ziisor Technology Co., Ltd 2020 Expert of IoT Antenna MECHANICAL DRAWING UNIT: mm DZP(TX2400-FPC-6615) 3 / 4 Copyright@Chengdu Ziisor Technology Co., Ltd 2020 Expert of IoT Antenna S.W.R. SMITH Note: Antenna exposed in air test data is for reference only DZP(TX2400-FPC-6615) 4 / 4 Copyright@Chengdu Ziisor Technology Co., Ltd 2020 Expert of IoT Antenna Company Name Chengdu Ziisor Technology Co., Ltd Telephone +86-028-61542639 Website www.ziisor.com Sales Contact [email protected] Technical Support [email protected] Company Address B5 Molding Tool Industry Park, No. 199 XiQu Avenue, Chengdu, China DISCLAIMER In order to provide our users with better ser vice, Chengdu Ziisor Technology Co., Ltd (hereinafter referred to as ziisor) will try to present as detailed and accurate product information as possible in this manual. However, due to the timeliness of the manual content, ziisor shall not absolutely guarantee the unlimited timeliness and applicability of the file. Ziisor has the right to update the manual content without further notice. To get the latest edition information, pls visit the official website of zi isor or contact our customer service staff. Thanks for your trust and support! CONTACT US 型号：DZP(TX2400-FPC-6615) 1. Ef ficiency/ Gain Test 效率测试 Freq（MHz） Eff i（%） Gai n（dBi） 240 0MHz 49.27 3.31 241 0MHz 48.55 3.1 242 0MHz 47.77 3.41 243 0MHz 47.11 3.5 244 0MHz 46.79 3.28 245 0MHz 46.21 3.07 246 0MHz 46.01 3.2 247 0MHz 45.76 2.84 248 0MHz 45.13 3.07 249 0MHz 44.98 2.9 250 0MHz 44.51 2.66 2. Radiation Pattern/辐射方向图

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN23XAMH 001 Auftrags-Nr.: Order no.: 180256997 Seite 1 von 58 Page 1 of 58 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2023.02.17 Auftraggeber: Client: Shenzhen LYF Intelligence Co., Ltd. NO.501 Building 1, Shenzhen Software Park Yuehai Street, Nanshan District, Shenzhen City, Guangdong P.R. China Prüfgegenstand: Test item: Robotic mower Bezeichnung / Typ-Nr.: Identification /Type no.: N1000,N2000 Auftrags-Inhalt: Order content: TÜV Rheinland FCC & ISED Service Prüfgrundlage: Test specification: FCC 47 CFR Part 15.203 FCC 47 CFR Part 15.247 FCC Part 15, Subpart B:2021 RSS-247 Issue 3 RSS-Gen Issue 5 ICES-003 Issue 7:2020 Wareneingangsdatum: Date of sample receipt: 2023.05.22 Refer to Photo Documentation Prüfmuster-Nr.: Test sample no: A003478075 Prüfzeitraum: Testing period: 2023.06.12 - 2023.07.08 Ort der Prüfung: Place of testing: Refer to section 1.1 Prüflaboratorium: Testing laboratory: TÜV Rheinland / CCIC (Ningbo) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: genehmigt von: authorized by: Datum: Date: 2023.10.30 Ausstelldatum: Issue date: 2023.10.30 Stellung / Position: Keda Zhou/PEStellung / Position:Feng Liang/Authorizer Sonstiges / Other: FCC ID: 2BAQQNOVABOT001 ISED: 30447-NOVABOT001 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende:1 = sehr gut2 = gut3 = befriedigend4 = ausreichend5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n)F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbarN/T = nicht getestet * Legend:1 = very good2 = good3 = satisfactory4 = sufficient5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s)N/A = not applicableN/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland / CCIC (Ningbo) Co., Ltd. 3F, building C13, R&D Park, No.32 Lane 299 Guanghua Road National Hi-Tech Zone, Ningbo 315048, P.R. China Mail: [email protected] · Web: www.tuv.com Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No.: CN23XAMH 001 Seite 2 von 58 Page 2 of 58 Anmerkungen Remarks Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2021, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht angegeben wird. Zu weiteren Informationen bezueglich des Risikos durch diese Entscheidungsregel siehe ILAC G8:2019. The decision rule for statements of conformity, based on numerical measurement results, in this test report is based on the R ILAC G8:2019 and IEC Guide 115:2021, unless otherwise specified in the applied standard …

Text truncated - open the document above for the full version.

Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No.: CN23XAMH 001 Seite 31 von 58 Page 31 of 58 Figure 8: Spectral Diagrams, Conducted Emission, 150KHz - 30MHz, L, Adapter 2 Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No.: CN23XAMH 001 Seite 32 von 58 Page 32 of 58 Figure 9: Spectral Diagrams, Conducted Emission, 150KHz - 30MHz, N, Adapter 2 Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No.: CN23XAMH 001 Seite 33 von 58 Page 33 of 58 4.1.9 Radiated Emission Test Specification Test standard : CFR47 FCC Part 15.107 CFR47 FCC Part 15.207 ICES-003 Issue 7:2020 RSS-Gen Issue 5, Clause 8.9, 8.10 Basic standard : ANSI C63.10: 2013, Clause 11.12 Port : Enclosure Frequency range : 30MHz-1000MHz for normal 30MHz-10 th Harmonic for intentional radiator Limits : CFR47 FCC Part 15.109 CFR47 FCC Part 15.205 CFR47 FCC Part 15.209 ICES-003 Issue 7:2020, table 2 RSS-Gen Issue 5, table 6, table …

Text truncated - open the document above for the full version.