2BARQ-WATCHFLASHSmartwatch

Sports Breath Shutter Sports Breath Shutter Sports Breath Shutter Stop watch Find Phone Screen Sleep Click on shutter option to access remote camera on your ash. Click again on the camera icon to open the camera on the app. Note: For both Android and IOS, you need to turn on the camera from the app and then trigger from the watch FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Imagine Marketing Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 7/25/2023 U.S. Agent Designation Im agine Marketing Ltd. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2BARQ- WATCHFLASH): Name and company of U.S. agent: FCC US Agent, LLC Physical U.S. address of agent: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA FRN of U.S. agent: 0033402884 Email address of U.S. agent: [email protected] FCC US Agent, LLC acknowledges their obligation to accept service of process on behalf of Imagine Marketing Ltd.. Imagine Marketing Ltd. with the FRN 0033617770 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission- related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Since rely, Signature abhinav pandey CEO Imagine Marketing Ltd. Signature Tim Payne Manager FCC US Agent, LLC 48_[model] US_Agent_2.911(d)(7)-U, V05

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows: We, applicant Company Name: Imagine Marketing Ltd. Address: E Wing, 2nd Floor, Corporate Avenue AG Road, Opp. Satellite Gazebo Andheri East, Mumbai, India Phone: +86-769-85421455 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-07-25 Name / Title: Abhinav Pandey / CEO Company: Imagine Marketing Ltd. Address: E Wing, 2nd Floor, Corporate Avenue AG Road, Opp. Satellite Gazebo Andheri East, Mumbai, India Phone: +86-769-85421455 Fax: N/A E-Mail: [email protected]

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2BARQ-WATCHFLASH Watch Flash, Flash, Flash RTL We, applicant Company Name: Imagine Marketing Ltd. Address: E Wing, 2nd Floor, Corporate Avenue AG Road, Opp. Satellite Gazebo Andheri East, Mumbai, India Phone: +86-769-85421455 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-07-25 Name / Title: Abhinav Pandey / CEO Company: Imagine Marketing Ltd. Address: E Wing, 2nd Floor, Corporate Avenue AG Road, Opp. Satellite Gazebo Andheri East, Mumbai, India Phone: +86-769-85421455 Fax: N/A E-Mail: [email protected]

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name 2BARQ-WATCHFLASH Watch Flash, Flash, Flash RTL For the products listed above, we request permanent confidentiality for all applicable exhibits as there are: • the Operational Description • the Block Diagram • the Schematics The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-07-25 Name / Title: Abhinav Pandey / CEO Company: Imagine Marketing Ltd. Address: E Wing, 2nd Floor, Corporate Avenue AG Road, Opp. Satellite Gazebo Andheri East, Mumbai, India Phone: +86-769-85421455 Fax: N/A E-Mail: [email protected]

Imagine Marketing Ltd. E Wing, 2nd Floor, Corporate Avenue AG Road, Opp. Satellite Gazebo Andheri East, Mumbai, India Date: July 25, 2023 FCC ID: 2BARQ-WATCHFLASH Model Number: Watch Flash, Flash, Flash RTL To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Imagine Marketing Ltd. hereby declare that our product (Smartwatch) Model Number: Watch Flash, Flash, Flash RTL board, Schematic, Hardware version, Software version, structure and internal photos are same, named differently due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, (Signed) Name/Title: Abhinav Pandey / CEO Company: Imagine Marketing Ltd. Address: E Wing, 2nd Floor, Corporate Avenue AG Road, Opp. Satellite Gazebo Andheri East, Mumbai, India Tel: +86-769-85421455 Fax: N/A E-Mail: [email protected]

Page 1 of 4 FCC ID: 2BARQ-WATCHFLASH Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity External Photos of the EUT Fig. 1 Fig. 2 Page 2 of 4 FCC ID: 2BARQ-WATCHFLASH Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 4 FCC ID: 2BARQ-WATCHFLASH Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Page 4 of 4 FCC ID: 2BARQ-WATCHFLASH Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7 Fig. 8

Page 1 of 1 FCC ID: 2BARQ-WATCHFLASH Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity LABEL AND LOCATION (Size: L6.0cm x 0.5cm) Label Location Smartwatch Model: Watch Flash FCC ID: 2BARQ-WATCHFLASH

Page 1 of 5 FCC ID: 2BARQ-WATCHFLASH Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Internal Photos of the EUT Fig. 1 Fig. 2 Page 2 of 5 FCC ID: 2BARQ-WATCHFLASH Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 5 FCC ID: 2BARQ-WATCHFLASH Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Antenna Page 4 of 5 FCC ID: 2BARQ-WATCHFLASH Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7 Fig. 8 Page 5 of 5 FCC ID: 2BARQ-WATCHFLASH Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 9 Fig. 10

Page 1 of 3 FCC ID: 2BARQ-WATCHFLASH Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC RF Exposure Evaluation 1. Product Information FCC ID : 2BARQ-WATCHFLASH Product name : Smartwatch Test Model : Watch Flash Power Supply : Input: 5V0.5A Battery:3.7V200mAh Hardware Version : V02 Software Version : V2.8 Bluetooth : 2402MHz ~ 2480MHz Channel Number : 40 channels for Bluetooth V5.0(DTS) Channel Spacing : 2MHz for Bluetooth V5.0(DTS) Modulation Type : GFSK for Bluetooth V5.0(DTS) Bluetooth Version : V5.0 Antenna Type : Internal Antenna Antenna Gain : -4.23dBi Exposure category : General population/uncontrolled environment EUT Type : Production Unit Device Type : Portable Device 2. Evaluation method and Limit According to KDB447498 D01 General RF Exposure Guidance v06 Section 4.3.1 Standalone SAR test exclusion considerations: “Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.“ [(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)] · [√f (GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm Page 2 of 3 FCC ID: 2BARQ-WATCHFLASH Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to f) in section 4.1 is applied to determine SAR test exclusion. When one of the following test exclusion conditions is satisfied for all combinations of simultaneous transmission configurations, further equipment approval is not required to incorporate transmitter modules in host devices that operate in the mixed mobile and portable host platform exposure conditions. The grantee is responsible for documenting this according to Class I permissive change requirements. Antennas that qualify for standalone SAR test exclusion must apply the estimated standalone SAR to determine simultaneous transmission test exclusion. a) The [∑ of (the highest measured or estimated SAR for each standalone antenna configuration, adjusted for maximum tune-up tolerance) / 1.6 W/kg] + [∑ of MPE ratios] is ≤ 1.0. b)The SAR to peak location separation ratios of all simultaneously transmitting antenna pairs operating in portable device exposure conditions are all ≤ 0.04, and the [∑ of MPE ratios] is ≤ 1.0. 3. Refer Evaluation Method ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 447498 D01 General RF Exposure Guidance v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1093: Radiofrequency radiation exposure evaluation: portable devices 4. Conducted Power Results <BT LE> Mode Channel Frequency (MHz) Peak Conducted Output Power (dBm) BT LE 0 2402 2.926 19 2440 3.301 39 2480 3.465 <BT 2LE> Mode Channel Frequency (MHz) Peak Conducted Output Power (dBm) BT LE 0 2402 2.939 19 2440 3.304 39 2480 3.466 5. Manufacturing Tolerance <BT LE> GFSK (Peak) Channel Channel 0 Channel 19 Channel 39 Target (dBm) 2.0 2.0 3.0 Tolerance ±(dB) 1.0 1.0 1.0 Page 3 of 3 FCC ID: 2BARQ-WATCHFLASH Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity <BT…

Text truncated - open the document above for the full version.

Shenzhen Tianweixun Wireless Technology Co., Ltd. SN88 CUSTOMER NAME BOARD MODE Confidentiality requirements Shenzhen Tianweixun Wireless Technology Co., Ltd. already owns the information provided by proprietary technology, and it is not allowed to disclose to any person or company without the prior written consent of Shenzhen Tianweixun Wireless Technology PRODUCT NAME L Product performance and specification approval letter Shenzhen Maizi Intelligent Co., Ltd. Date: May 5, 2023 R&D Customers confirmation Quality department Client Address: Floor 4, Building A1, Rixin Technology Park, No. 528, Huarong Road, Dalang Street, Longhua New District, Shenzhen Tel: 86-755-29361726 /85268343 Fax: 86-755-23732325 Date (Date): Approval product name: client's name: Tianweixun material number: Shenzhen Tianweixun Wireless Technology Co., Ltd. Producer shenzhenTian wei xun wireless technology co.,ltd. Quality department Admit manufacturing partyR &D Department Product performance and specification approved client confirmation client ME: DE007-02 RF: Machine Translated by Google 3.1.6 Actual test results of WIFI antenna...................................................................................6 2.1 Purpose ................................................................................................................................................ 2 3.1.7 Gain, efficiency and pattern................................... ................................................... ...................................7 3.1.3 Antenna design working frequency band................................................................................................... 3 3.1 Antenna................................................... ................................................... .......................................... 2 4.1 Product Design Drawing ................................................... ................................................... ..............................8 5.1 Product assembly illustration................................... ................................................... ................................... 6 3.1.4 The measurement data of the main antenna in the ETS-SG24SYSTEM 3D test system........................... ...................................3 3.1.1 Antenna electrical specifications and materials................................................................................................... 3 3.1.5 Antenna passive standing wave and return loss................................... ................................................... ................... 6 3.1.2 Antenna form................................................................................................................................... 3 1.1.1 Antenna matching diagram................................................................................................................... 2 1.1 Project Diagram...................................................................................................................................2 Shenzhen Tianweixun Wireless Technology Co., Ltd. index Shenzhen Tianweixun Wireless Technology Co., Ltd. already owns the information provided by the proprietary technology, and it is not allowed to disclose to any company or individual without the company's prior written consent. page 1 Product model: SN88 Product Name: 2.4G BT Antenna Confidential Information R & D Centerissue date Product specification 2023-5-5 confidentiality requirements Liao Xianming Publishing department Version A1 Machine Translated by Google Shenzhen Tianweixun Wireless Technology Co., Ltd. A1 1.1.1 Antenna matching SN88 range, to avoid errors caused by different test conditions and methods. E4 (0402) Matching Description: The matching is based on the original main board and has not been changed. picture To regulate the specifications and test methods of mobile communication terminal antenna products produced by Shenzhen Tianweixun Wireless Technology Co., Ltd. 2.1 Purpose 3.1 Antenna 1.1 Project Diagram 2023-5-5 Liao Xianming E2(0402) -- issue date E1(0402) R & D Center Element -- Publishing department inductance -- confidentiality requirements Product specification capacitance -- -- -- -- Version E3(0402) -- Product Name: 2.4G BT Antenna Product model: SN88 Confidential Information Shenzhen Tianweixun Wireless Technology Co., Ltd. already owns the information provided by the proprietary technology, and it is not allowed to disclose to any company or individual without the company's prior written consent. page 2 Machine Translated by Google Shenzhen Tianweixun Wireless Technology Co., Ltd. A1 Shenzhen Tianweixun Wireless Technology Co., Ltd. already owns the information provided by the proprietary technology, and it is not allowed to disclose to any company or individual without the company's prior written consent. Page 3 3.1.2 Antenna form: 3.1.1 Antenna Electrical Specifications and Materials Implementation type: monopole antenna The working frequency band of the antenna is 2412MHz~ 2472MHz. This report mainly provides the test status of the structural performance parameters of the SN 8 8 antenna. 3.1.4 Main antenna measurement data in ETS-SG24SYSTEM 3D test system Antenna material: Bluetooth antenna 3.1.3 Antenna design working frequency band: The physical picture of the antenna designed by Tianweixun Publishing department Figure (2) The three-dimensional positioning device of the mobile phone in the dark room confidentiality requirements Product specification Liao Xianming issue dateR & D Center Figure (1) ETS test system Version 2023-5-5 Product Name: 2.4G BT Antenna Confidential Information Product model: SN88 Machine Translated by Google Shenzhen Tianweixun Wireless Technology Co., Ltd. A1 Product Name: 2.4G BT Antenna Confidential Information Product model: SN88 R & D Center confidentiality requirements Product specification issue date Liao Xianming 2023-5-5 Publishing department Version 3.1.5 T…

Text truncated - open the document above for the full version.

Page 1 of 35 FCC ID: 2BARQ-WATCHFLASH Report No.: LCSA070323149EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Appendix A RF Test Data for BLE (Conducted Measurement) Product Name: Smartwatch Test Model: Watch Flash Environmental Conditions Temperature: 23.5 C Relative Humidity: 52.2% ATM Pressure: 100.0 kPa Test Engineer: Taylor Hu Supervised by: Ling Zhu Page 2 of 35 FCC ID: 2BARQ-WATCHFLASH Report No.: LCSA070323149EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.1 -6dB Bandwidth Condition Mode Frequency (MHz) Antenna -6 dB Bandwidth (MHz) Limit -6 dB Bandwidth (MHz) Verdict NVNT BLE 1M 2402 Ant1 0.623 0.5 Pass NVNT BLE 1M 2440 Ant1 0.624 0.5 Pass NVNT BLE 1M 2480 Ant1 0.615 0.5 Pass NVNT BLE 2M 2402 Ant1 0.92 0.5 Pass NVNT BLE 2M 2440 Ant1 0.889 0.5 Pass NVNT BLE 2M 2480 Ant1 0.897 0.5 Pass Page 3 of 35 FCC ID: 2BARQ-WATCHFLASH Report No.: LCSA070323149EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs -6dB Bandwidth NVNT BLE 1M 2402MHz Ant1 -6dB Bandwidth NVNT BLE 1M 2440MHz Ant1 Page 4 of 35 FCC ID: 2BARQ-WATCHFLASH Report No.: LCSA070323149EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity -6dB Bandwidth NVNT BLE 1M 2480MHz Ant1 -6dB Bandwidth NVNT BLE 2M 2402MHz Ant1 Page 5 of 35 FCC ID: 2BARQ-WATCHFLASH Report No.: LCSA070323149EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity -6dB Bandwidth NVNT BLE 2M 2440MHz Ant1 -6dB Bandwidth NVNT BLE 2M 2480MHz Ant1 Page 6 of 35 FCC ID: 2BARQ-WATCHFLASH Report No.: LCSA070323149EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.2 Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Total Power (dBm) Limit (dBm) Verdict NVNT BLE 1M 2402 Ant1 2.926 30 Pass NVNT BLE 1M 2440 Ant1 3.301 30 Pass NVNT BLE 1M 2480 Ant1 3.465 30 Pass NVNT BLE 2M 2402 Ant1 2.939 30 Pass NVNT BLE 2M 2440 Ant1 3.304 30 Pass NVNT BLE 2M 2480 Ant1 3.466 30 Pass Page 7 of 35 FCC ID: 2BARQ-WATCHFLASH Report No.: LCSA070323149EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs Power NVNT BLE 1M 2402MHz Ant1 Power NVNT BLE 1M 2440MHz Ant1 Page 8 of 35 FCC ID: 2BARQ-WATCHFLASH Report No.: LCSA070323149EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Power NVNT BLE 1M 2480MHz Ant1 Power NVNT BLE 2M 2402MHz Ant1 Page 9 of 35 FCC ID: 2BARQ-WATCHFLASH Report No.: LCSA070323149EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Power NVNT BLE 2M 2440MHz Ant1 Power NVNT BLE 2M 2480MHz Ant1 Page 10 of 35 FCC ID: 2BARQ-WATCHFLASH Report No.: LCSA070323149EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.3 Maximum Power Spectral Density Level Condition Mode Frequency (MHz) Antenna Total PSD (dBm/3kHz) Limit (dBm/3kHz) Verdict NVNT BLE 1M 2402 Ant1 -0.84 8 Pass NVNT BLE 1M 2440 Ant1 -0.43 8 Pass NVNT BLE 1M 2480 Ant1 -0.34 8 Pass NVNT BLE 2M 2402 Ant1 -6.11 8 Pass NVNT BLE 2M 2440 Ant1 -5.7 8 Pass NVNT BLE 2M 2480 Ant1 -5.58 8 Pass Page 11 of 35 FCC ID: 2BARQ-WATCHFLASH Report No.: LCSA070323149EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs PSD NVNT BLE 1M 2402MHz Ant1 PSD NVNT BLE 1M 2440MHz Ant1 Page 12 of 35 FCC ID: 2BARQ-WATCHFLASH Report No.: LCSA070323149EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.l…

Text truncated - open the document above for the full version.

Page 1 of 34 FCC ID: 2BARQ-WATCHFLASH Report No.: LCSA070323149EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www…

Text truncated - open the document above for the full version.