2BB29-RUPSLElectric turntable

ComXim intelligent turntable instruction MT500RUPSL50 Electric turntable operating manual ComXim Used for product rotation display 360 degree shooting 3D scanning ① Plug in power supply and turn on the turntable. ②Use the remote control to control the rotation modes, rotation speeds and rotation angles.) ③This Series of electric turntables support 3 rotation modes: continuous, intermittent and left-and-right swing. Product parameters Item No. Voltage Speed（S/Lap）Max Load（Kg） MT200RL20x MT320RL40x MT350RL40x MT400RL40x MT500RL200x NT600RL200x MT800RL300x NT400RL40x 100V – 240vAC 100V – 240vAC 100V – 240vAC 100V – 240vAC 100V – 240vAC 100V – 240vAC 20-68(S/Lap 100V – 240vAC 100V – 240vAC ) 25-72(S/Lap) 28-74(S/Lap) 27-76(S/Lap) 34-90(S/Lap) 34-90 (S/Lap) 55-140(S/Lap) 25-72(S/Lap) 20 Kg 40 Kg 40 Kg 40 Kg 200 Kg 200 Kg 300 Kg 40 Kg Copyright reserved by Shenzhen ComXim Technologies Co.,Ltd.2023 www.comxim.com MT Series turntable model maming rules, identification and main characteristics 320 RL L40 MT 200 RL L20 X Series Turntable Sub code Max Load name Model R: Remote control (Kg) code Diameter (cm) 2 International or color Small remote controller instructions Note:ACR2025 buon baery is used to provide power for the remote controller. Copyright reserved by Shenzhen ComXim Technologies Co.,Ltd.2023 www.comxim.com save start / plause speed down speed up clockwise rotation counterclockwise rotation 3 Medium remote controller instructions Copyright reserved by Shenzhen ComXim Technologies Co.,Ltd.2023 www.comxim.com 1.Save:Stor the current settings to the tuentable flash. 3.SIngle rotation:By pressing thebutton in this group ,the turntable rotaes only ince.If you press the 0.1 or 0.5,just rotate 0.1 degrees or 0.5 degrees,it will stop.If you press the 1/64,1/48,1/32..., the turntabale rotates only ince ,such as 1/64,that is run 360*1/64 degrees. These buttons are respectively rotation angle:5.625 degrees,7.5 degrees, 11.25 degrees... 9.Multi angle shooting shortcut keys:Function:Press this key to control the turntable to suspend”n” times within a circle.(n=2,n=4,n=8...) For example:press the ket in this group(e.g.8 keys),theturntable rotates every time 1/8circle,45 degrees (=360*1/8),suspended one times,suspended time 4 seconds(MTxxxBSLx/MTxxxWSLx series is automatically sent out the shutter signal to take a photo),repeat 8 times that a circle automatically back to the starting position. 10.Focus:Control the turntable to output the focus signal. Notice:These three functions (Item14/Item15/Item16)are supported only by MTxxxBSLx and MTxxxWSLx.Product model name contains”WSL”or”BSL”. 2.Lock: In addition to this button,the other key is invalid. 4.Set origin location:Set the current position to the starting position of the turntable. 5. Speed up:The rotary speed is accelerated. 6.Clokwise rotation:Control the turntable to rotate clockwise. 7.Start/Stop:Control the turntable to rotate or stop. 8.Continuous totation:Control the turntable to rotate continuously. 11. Return to the origin:Contrl the turntable to return to the orignal position. 12.Counter clockwise rotation:Control the turntable to rotate counter clockwis. 13.Slow down:Control the turntable speed decrease. 14.Intermittent rotation:Control the turntable to rotate intermittently. 15.Auto:Control the turntable to output the focus signal and the shutter signal. 16.Shutter:Control the turntable to output the shutter signal. 4 Note:AAA baery is used to provide power for the remote controller. Copyright reserved by Shenzhen ComXim Technologies Co.,Ltd.2023 www.comxim.com 1.Lock: Except for this key, other keys are invalid. 7.Acceleration key: Press this key to increase the speed by one gear. 8.Rotate left:Turntable rotates clockwise. 9.Stop/Start 12.Continouse mode: Press this key to swich to continouse mode. 15.Hot keys of equally circular rotation:Forexample, press 8, the turntable will stop 8 times with 45° rotating angle and for 3 senconds each time. Duringeach stop,the turntable automatically sends a shutter signal for the camera to take pictures(Some premium versions support this features). Turntable will stop aftera lap. 16.Focus: Output camera focus signal. 19:Multimedia key(Adjust lights and volume.) 4. Original position: Turntable rotates back to the original position. 6. Reserved key: This key doesn't have function yet. 10.Rotate right: Turtable rotates counterclockwise. 11.Deceleration key:Press this keyto decrease the speed by one gear. 13.Interminnent mode: Press this key to switch to interminnent mode. 14.Left-and-right mode: For example, press 90°, the turntable willturn 45°to the left and 45° to the right,centeredon the current position. 17.Focuse and shutter: Output focus and shutter signal. (Pro version supports this feature.) 2. Save: Save current settings. 3. Hot keys: Press any key in this group and turtable rotates the corresponding angle once. 18.Shutter: Output camera shutter signal. (Pro version supports this feature.) 5.Original position setting: Set current position as original position. Large remote controller instructions 5 Note:AAA baery is used to provide power for the remote controller. Pl recautions ①Attention: Electric turntables are of electric products. They are Not waterproof and not heat resistant. ②In cases when turntable doesn’t work, please check whether the turntable is powered on, whether the power cord is plugged in tightly, and whether the switch is turned on. If the turntable still cannot work normally, please contact us. ③The load-bearing capacity of the turntable refers to the maximum load that the turntable can bear when the item is smaller than the diameter of the turntable. If the item exceeds the diameter of the turntable, the load-bearing capacity will be greatly reduced, and even it will not turn. ④In order to prolong the service life of the turntable, it is recommended to stop for 2 hours after working continuously for 8 hours. ⑤In order to protect the safety of users, unauthorized mod…

Text truncated - open the document above for the full version.

(ShenzhenComXimTechnologiesCo.,Ltd.) FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2023-08-25 FCCID:2BB29-RUPSL Ref.#1:AttestationStatementsPart2.911(d)(5)(i)Filing (“ShenzhenComXimTechnologiesCo.,Ltd.”)certifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedfromreceivinganequipment authorizationpursuanttosection2.903oftheFCCrules. Ref.#2:AttestationStatementsPart2.911(d)(5)(ii)Filing (“ ShenzhenComXimTechnologiesCo.,Ltd. ”)certifiesthat,asofthedateofthefilingof theapplication,theapplicant[isnot]identifiedontheCoveredListasanentity producing“covered”equipment. Applicant:ShenzhenComXimTechnologiesCo.,Ltd. Address:2FBlockAandB,DonghaiwangIndustrialZone,No.369BulongRoad,Longgang District,Shenzhen ContactPerson:TANJIANPING Tel.:Manager Email:[email protected] Sincerely, Signature:

ShenzhenComXimTechnologiesCo.,Ltd. Address ： 2FBlockAandB,DonghaiwangIndustrialZone,No.369BulongRoad,LonggangDistrict, Shenzhen Date:2023-09-03 FederalCommunicationsCommission AuthorizationandEvaluationDivision 1435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsPart2.911(d)(7)Filing SUBJECT:FCCApplicationforFCCID:2BB29-RUPSL (“ShenzhenComXimTechnologiesCo.,Ltd.”)certifiesthat,asofthedateofthefilingofthe application,(JOCAustraliaInc)isourdesignatedU.S.agentforserviceofprocessforthe abovereferencedFCCID.(“ShenzhenComXimTechnologiesCo.,Ltd.”)acceptstomaintain anagentfornolessthanoneyearafterthegranteehasterminatedallmarketingand importationortheconclusionofanyCommission-relatedproceedinginvolvingtheequipment. (JOCAustraliaInc)accepts,asofthedateofthefilingoftheapplication,theobligationofthe designatedU.S.agentforserviceofprocessfortheabovereferencedFCCID. DesignatedU.S.AgentInformation: Name:JOCAustraliaInc Address:18351ColimaRoadSte585RowlandHerghts,California,91748UnitedStatesof America ContactBenjamin.Smith/VicePresident Tel.:GeneralManager Email:[email protected] FRN:0033379421 Contactphone:(626)217-4778 GC: Sincerely, ShenzhenComXimTechnologiesCo.,Ltd.JOCAustraliaInc Name:TANJIANPINGName:Benjamin.Smith Title:ManagerTitle:VicePresident Date:2023-09-03Date:2023-09-03

1 1、Antennaintroduction TheBluetoothmoduleantennaisdirectlyusedonthePCB. Manufacturer ： LenzeDesignInc Address：7thFloor,ChingPoBuilding,ShenzhenSpecialZonePressGroup,Futian District,Shenzhen 2 、 Antennashape 2 3、Antennaparameter TheBluetoothantennaoperatesat2402-2480MHzandgeneratesresonanceinthis band.Thetablebelowshowsthemainparametersoftheantenna. Frequency(MHz) 2402~2480MHz VSWR ≤1.95 Impedance 50OhmNominal ReturnLoss-15dBMax RadiationOmni-directional Gain(Peak) 3.63dBi Polarization Linear,Vertical AdmittedPower 1MW ConnectorTin 3 4、Antennagainreport SpectrumDetector:PK TestDate: Feb18,2019 TestBy: Mark Temperature: 25 C TestResult: PASSHumidity: 52% Modulation: GFSK FrequencyVNA (MHz) ETotal.dB(dB)Gain(dBi) 2400MHz0.04035033.56 2410MHz0.08862643.63 2420MHz0.2673813.46 2430MHz0.1930123.35 2440MHz0.263663.24 2450MHz 0.07231393.57 2460MHz 0.368953.63 2470MHz0.5515253.41 2480MHz0.6407023.24 2490MHz1.052323.05 2500MHz1.084432.91 5 Directionmap

Familymodelsletter FCCID:2BB29-RUPSL Models:MT200RUPSL20-A,MT200RUPSL20-B, MT200RUPSL20-AB,MT200RUPSL20-BA,MT320RUPSL40-A,MT320RUPSL40-B, MT320RUPSL40-AB,MT320RUPSL40-BA,MT350RUPSL40-A,MT350RUPSL40-B, MT350RUPSL40-AB,MT350RUPSL40-BA,MT400RUPSL40-A,MT400RUPSL40-B, MT400RUPSL40-AB,MT400RUPSL40-BA,MT500RUPSL50-A,MT500RUPSL50-B, MT500RUPSL50-AB,MT500RUPSL50-BA,NT600RUPSL50-A,NT600RUPSL50-B, NT600RUPSL50-AB,NT600RUPSL50-BA,MT600RUPSL50-A,MT600RUPSL50-B, MT600RUPSL50-AB,MT600RUPSL50-BA Companyname:ShenzhenComXimTechnologiesCo.,Ltd. CompanyNumber:2BB29 ContactName:TANJIANPING Address:2FBlockAandB,DonghaiwangIndustrialZone,No.369 BulongRoad,LonggangDistrict,Shenzhen TelephoneNo:86-15899784558 FaxNo:N/A Email:[email protected] TheirPCBboards,structures,andinteriorsarethesame,buttheircolorsandsizesare notconsistent Date:2023.8.25 Signature:

ShenzhenComXimTechnologiesCo.,Ltd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:August28,2023 Subject;RequestforConfidentiality FCCID:2BB29-RUPSL ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket.  SchematicDiagram  BlockDiagram OperationalDescription Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:TANJIANPING Title:Manager

EffectiveDate:April2,2020QSF7.6.4-8–AgentAuthorizationLetterTemplatePage1of1 RevisionDate:Revision:0 ShenzhenComXimTechnologiesCo.,Ltd Date:2023.08.15 ProductModelNumber:Electricturntable FCCID:2BB29-RUPSL Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C.CanadaV5J5K5to actonourbehalfonallmattersconcerningtheabovenamedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatORGANIZATION.isallowedtoforwardallinformationrelatedtotheapproval projecttotheappliedcertificationbodyandtothenotificationentitiesandtodiscussanyissues concerningtheapprovalapplication.AnyandallactscarriedoutbyORGANIZATION.onour behalfshallhavethesameeffectasactsofourown. By: ContactListedonFCCWesbite Title:Manager Email:[email protected] Telephone:+8615899784558 Onbehalfof:ShenzhenComXimTechnologiesCo.,Ltd

ExternalPhotograph

LabelLocation

InternalPhotograph A V ANT ANT

FCCMPEReport FCCID:2BB29-RUPSLPage1of2 FCC§15.247(i),§2.1091–RFExposure FCCID :2BB29-RUPSL Appliedprocedures/limit AccordingtoFCC§15.247(i)and§1.1307(b)(1),systemsoperatingundertheprovisionsofthis sectionshallbeoperatedinamannerthatensuresthatthepublicisnotexposedtoradio frequencyenergylevelinexcessoftheCommission’sguidelines. LimitsforOccupational/ControlledExposure Frequency Range(MHz) ElectricField Strength(E) (V/m) MagneticField Strength(H) (A/m) PowerDensity(S) (mW/cm 2 ) AveragingTime |E| 2 ,|H| 2 orS (minutes) 0.3-3.06141.63(100)*6 3.0-301842/f4.89/f(900/f)*6 30-30061.40.1631.06 300-1500F/3006 1500-100,00056 Note:ƒisfrequencyinMHz *=Powerdensitylimitisapplicableatfrequenciesgreaterthan100MHz LimitsforGeneralPopulation/UncontrolledExposure Frequency Range(MHz) ElectricField Strength(E) (V/m) MagneticField Strength(H) (A/m) PowerDensity(S) (mW/cm 2 ) AveragingTime |E| 2 ,|H| 2 orS (minutes) 0.3-1.346141.63(100)*30 1.34-30824/f2.19/f(180/f)*30 30-30027.50.0730.230 300-1500F/150030 1500-100,0001.030 FCCMPEReport FCCID:2BB29-RUPSLPage2of2 RFFieldStrengthLimitsforDevicesUsedbytheGeneralPublic(Uncontrolled Environment) Note:f=frequencyinMHz *=Plane-waveequivalentpowerdensity MPEPREDICTION PredicationofMPElimitatagivendistance,EquationfromOETBulletin65,Edition97-01 Where:S=powerdensity P=powerinputtoantenna G=powergainoftheantennainthedirectionofinterestrelativetoanisotropicradiator R=distancetothecenterofradiationoftheantenna,R=0.2m TESTRESULTS Mode tuneup power tolerance (dBm) max. output power(mW) Directional Gain (numeric) Power Densityat R=20cm (mW/cm2) Limit (mW/cm 2 ) Result 24020±11.2593.630.00061.0PASS 2440 0±1 1.2593.630.00061.0PASS 24800±11.2593.630.00061.0PASS Conclusion: Forthemaxresult:0.0006mW/cm2≤1.0mW/cm,NoSARisrequired.

- Page 1 of 45 - Report No.: HB20230726003E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product： Electric turntable Trade Mark: ComXim Model Number： MT500RUPSL50 FCC ID： 2BB29-RUPSL Prepared for Shenzhen ComXim Technologies Co.,Ltd. 2F Block A and B, Donghaiwang IndustrialZone, No. 369 BulongRoad, Longgang District, Shenzhen Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 45 - Report No.: HB20230726003E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION .............................................................................................................................. 6 1.1 DESCRIPTION OF EUT ................................................................................................................................. 6 1.2 TEST MODE ................................................................................................................................................ 6 1.3 OPERATION CHANNEL LIST .......................................................................................................................... 7 1.4 TEST SETUP ............................................................................................................................................... 7 1.5 ANCILLARY EQUIPMENT ............................................................................................................................... 7 2 SUMMARY OF TEST RESULT ....................................................................................................................... 8 3 TEST FACILITIES AND ACCREDITATIONS .................................................................................................. 9 3.1 TEST LABORATORY ..................................................................................................................................... 9 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................... 9 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................... 9 3.4 TEST SOFTWARE ........................................................................................................................................ 9 4 LIST OF TEST EQUIPMENT ........................................................................................................................ 10 5 TEST ITEM AND RESULTS .......................................................................................................................... 12 5.1 ANTENNA REQUIREMENT ........................................................................................................................... 12 5.1.1 Standard Requirement .................................................................................................................... 12 5.1.2 Test Result ...................................................................................................................................... 12 5.2 CONDUCTED EMISSION ............................................................................................................................. 13 5.2.1 Limits ............................................................................................................................................... 13 5.2.2 Test Procedures .............................................................................................................................. 13 5.2.3 Test Setup ....................................................................................................................................... 14 5.2.4 Test Result ...................................................................................................................................... 14 5.3 RADIATED EMISSION ................................................................................................................................. 17 5.3.1 Limits ............................................................................................................................................... 17 5.3.2 Test Procedures .............................................................................................................................. 17 5.3.3 Test Setup ....................................................................................................................................... 17 5.3.4 Test Result ...................................................................................................................................... 18 5.3.5 Band Edge - Radiated ..................................................................................................................... 22 5.3.6 Spurious emission in restricted band 3260MHz-18000MHz ........................................................... 23 5.4 PEAK OUTPUT POWER .............................................................................................................................. 24 5.4.1 Limit ................................................................................................................................................. 24 5.4.2 Test Procedure ................................................................................................................................ 24 5.4.3 Test Setup ................…

Text truncated - open the document above for the full version.

TestSetupPhotograph RadiatedEmissionBelow1GHz RadiatedEmissionAbove1GHz Conductedemission