Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
CE BRANDS INTERNATIONAL INC. 1400, 350-7 Avenue SW, Calgary, Alberta T2P3N9,Canada Attestation Statements Not Covered EntityApplicant &Not Covered Equipment To: Federal Communications Commission Date: Dec. 09, 25 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i)& (ii) FCC ID: 2BB8P-REEBOKSTRIDE CE BRA NDS INTERNATIONAL INC. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903of the FCC rules. Sinc erely yours, Applicant Signature Printed Name: Kalvie Legat Title: Chief Executive Officer Address: 1400, 350-7 Avenue SW, Calgary, Alberta T2P3N9,Canada Tel.: +1 (403) 870-4621 Email: [email protected]
CE BRANDS INTERNATIONAL INC. 1400, 350-7 Avenue SW, Calgary, Alberta T2P3N9,Canada 1| Page Attestation Statements To: Federal Communications CommissionDate: Dec. 19, 25 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2BB8P-REEBOKSTRIDE Product Name: Smart Watch This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1.Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2.Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendixevaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, App licant Signature Applicant Signature Printed Name: Kalvie Legat Title: Chief Executive Officer Address: 1400, 350-7 Avenue SW, Calgary, Alberta T2P3N9,Canada Tel.: +1 (403) 870-4621 Email: [email protected] CE BRANDS INTERNATIONAL INC. 1400, 350-7 Avenue SW, Calgary, Alberta T2P3N9,Canada 2| Page Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ There is storage capacitylimitation for store or install the Cybersecurity or anti-virus software. Compliance ☒ Operatingsystem used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check
[CE BRANDS INTERNATIONAL INC.] [1400, 350-7 Avenue SW] [Calgary, Alberta, T2P3N9] [Canada] Date: [2025-12-24] Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: [2BB8P-REEBOKSTRIDE] FRN: [0034051847] US Agent – Attestation Statement / Part 2.911(d)(7) [CE BRANDS INTERNATIONAL INC.]certifies, that as of [2025-12-24], we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: [2BB8P- REEBOKSTRIDE]. [CE BRANDS INTERNATIONAL INC.], accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of [CE BRANDS INTERNATIONAL INC.] for FCC ID: [2BB8P-REEBOKSTRIDE]. Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: [CE BRANDS INTERNATIONAL INC.] Designated Agent: FCC US Agent, LLC Company Representative: [Kalvie Legat] Designated Agent Representative: Tim Payne Signature: [ ] Signature:
CE BRANDS INTERNATIONAL INC. 1400, 350-7 Avenue SW, Calgary, Alberta T2P3N9,Canada 12.19.2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2BB8P-REEBOKSTRIDE Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby requestpermanent confidential treatment of the exhibits accompanying thiscertification application as outlin ed below : Block Diagram Schematics Operational Description — BOM The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Pursuant to DA 04-1705, the applicant also requests temporary confidential treatment of the exhibits outlined below for a period of (up to 180)days from the date of equipment authorization and prior to marketing in the United States to prevent the premature release of any sensitive information. Applicant is aware of their responsibility to notify DERYCOMin the event information regarding the product or the product is made available to the public before the requested period has expired. Us er Manual Internal Photos External Photos Test Setup Photos Sinc erely, (Signature) Pri nted Name: Kalvie Legat Title: Chief Executive Officer Address: 1400, 350-7 Avenue SW, Calgary, Alberta T2P3N9,Canada Tel.: +1 (403) 870-4621 Email: [email protected]
CE BRANDS INTERNATIONAL INC. 1400, 350-7 Avenue SW, Calgary, Alberta T2P3N9,Canada (12.19.2025) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2BB8P-REEBOKSTRIDE I, the undersigned, hereby authorize (SHENZHEN TONGCE TESTING LAB) to act on our behalfin all matters relating to this application for equipment certification. Any act c arried out by (SHENZHEN TONGCE TESTING LAB) shall have the same effect as our own and I acknowledge that all r esponsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with (CE BRANDS INTERNATIONAL INC.). We certify that we are not subject to a denial of federal benefits that includes FCC benefitspursuant to Section 5301 of the Anti-Dr ug Abuse Act of 1988, 21 U.S.C. §862, and that no partyto the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sinc erely, (Si gnature) Name: K alvie Legat Title: Chief Executive Officer Tel.: +1 (403) 870-4621 Fax: N/A Email: [email protected]
Label Artwork and Location Model: Reebok Stride Label: Step1, Click to Settings Step2, Click to About Step3, Click to Label
Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com TEST REPORT FCC ID. ............................ : 2BB8P-REEBOKSTRIDE Test Report No. ............... : TCT251113E065 Date of issue ................... : Dec. 19, 2025 Testing laboratory .......... : SHENZHEN TONGCE TESTING LAB Testing location/ address: 2101 & 2201, Zhenchang Factory, Renshan Industrial Zone, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, 518103, People's Republic of China Applicant's name ............ : CE BRANDS INTERNATIONAL INC. Address ........................... : 1400, 350-7 Avenue SW, Calgary, Alberta, T2P3N9, Canada Manufacturer's name ... : BEIJING KANGSHUO INFORMATION TECHNOLOGY Co., Ltd Address ........................... : Room 101, 3rd Floor, Building 3, Yard 33, Zique Road, Haidian District, Beijing, CHINA.100085 Standard(s) ..................... : KDB 447498 D01 General RF Exposure Guidance v06 FCC CFR Title 47 Part 2.1093 Product Name ................. : Smart Watch Trade Mark ...................... : Reebok Model/Type reference..... : Reebok Stride Rating(s).......................... : Rechargeable Li-ion Battery DC 3.8V Date of receipt of test item ......................................... : Nov. 13, 2025 Date (s) of performance of test ................................... : Nov. 13, 2025 ~ Dec. 19, 2025 Tested by (+signature) ... : Yannie ZHONG Check by (+signature) .... : Beryl ZHAO Approved by (+signature): Tomsin General disclaimer: This report shall not be reproduced except in full, without the written approval of SHENZHEN TONGCE TESTING LAB. This document may be altered or revised by SHENZHEN TONGCE TESTING LAB personnel only, and shall be noted in the revision section of the document. The test results in the report only apply to the tested sample. Report No.: TCT251113E065 Page 2 of 6 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Table of Contents 1. General Product Information .................................................................. 3 1.1. EUT description ..................................................................................................... 3 1.2. Model(s) list ............................................................................................................ 3 2. General Information ................................................................................. 4 2.1. Test environment and mode ................................................................................. 4 2.2. Description of Support Units ................................................................................ 4 3. Facilities and Accreditations .................................................................. 5 3.1. Facilities ................................................................................................................. 5 3.2. Location ................................................................................................................. 5 4. Test Results and Measurement Data ..................................................... 6 Report No.: TCT251113E065 Page 3 of 6 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com 1. General Product Information 1.1. EUT description Product Name ....................... : Smart Watch Model/Type reference........... : Reebok Stride Sample Number....................: TCT251113E052-0101 Operation Frequency ........... : 2402MHz~2480MHz Modulation Type ................... : For BT: GFSK, π/4-DQPSK, 8DPSK For BLE: GFSK Antenna Type ........................ : FPC Antenna Antenna Gain ........................ : -12.3dBi Rating(s)................................ : Rechargeable Li-ion Battery DC 3.8V Note: The antenna gain listed in this report is provided by applicant, and the test laboratory is not responsible for this parameter. 1.2. Model(s) list None. Report No.: TCT251113E065 Page 4 of 6 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com 2. General Information 2.1. Test environment and mode Item Normal condition Temperature +25ºC Voltage DC 3.8V Humidity 56% Atmospheric Pressure: 1008 mbar Test Mode: Engineering mode: Keep the EUT in continuous transmitting by select channel 2.2. Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. Equipment Model No. Serial No. FCC ID Trade Name / / / / / Note: 1. All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test. 2. Grounding was established in accordance with the manufacturer’s requirements and conditions for the intended use. 3. For conducted measurements (Output Power, 20dB Occupied Bandwidth, Carrier Frequencies Separation, Hopping Channel Number, Dwell Time, Spurious Emissions), the antenna of EUT is connected to the test equipment via temporary antenna connector, the antenna connector is soldered on the antenna port of EUT, and the temporary antenna connector is listed in the Test Instruments. Report No.: TCT251113E065 Page 5 of 6 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com 3. Facilities and Accreditations 3.1. Facilities The test facility is recognized, certified, or accredited by the following organizations: ● FCC - Registration No.: 645098 SHENZHEN TONGCE TESTING LAB Designation Number: CN1205 The testing lab has been registered and fully described in a report with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. ● A2LA-No.: 4320.01 SHENZHEN TONGCE TESTING LAB The testing lab has been accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. 3.2. Location S…
Text truncated - open the document above for the full version.
ShenzhenYushengCommunicationEquipmentCo.,LTD 1 RK80Projectantennaspecification Customername:BenNiaoWuLian Customername:RK90 Productname:FPCantenna Sizeofproduct:BT Materialcode: ChangeContentCV: order number editionstateStartandenddatepersonliablepagenumberremarks 1editio princeps editioprinceps2025-11-24LiJieyi 9 TheSupplieracknowledgesthesignatureofthefollowingdocuments: Responsibleperson/dateIQC/dateReview/DateApproval/Date MD RF TheDemanderacknowledgesthesignature(pleasesenditbackaftertheconfirmation): Thedemander'sjudgmentresult:□qualified□unqualified Development&Design Engineer/Date SQEEngineer/DatePurchasingLeader/DateDevelopmentManager approval/date ShenzhenYushengCommunicationEquipmentCo.,LTD 2 Catalogue 1.OVERVIEW.......................................................................................................................................................3 1.1SCOPEOFAPPLICATION........................................................................................................................................3 1.2PROJECTBASICINFORMATION..............................................................................................................................3 2.TECHNICALINDEXREQUIREMENTS.....................................................................................................3 2.2.1INTRODUCTIONOFTESTITEMSANDEQUIPMENT.............................................................................................3 2.2.2TESTINSTRUCTIONS..........................................................................................................................................3 2.2.3PASSIVEANTENNAPARAMETER.......................................................................................................................4 2.2.4BTAPPLECHART/DIRECTIONCHART-ARM..................................................................................................5 2.2.5A NTENNALOADINGCOIL -BT ..........................................................................................................................5 2.2.6TESTIMAGE......................................................................................................................................................6 3.ENGINEERINGDRAWING..........................................................................................................................7 3.1FPC ANTENNA....................................................................................................................................................7 4.BILLOFMATERIALS.....................................................................................................................................8 5.PACKAGEDRAWING...................................................................................................................................9 ShenzhenYushengCommunicationEquipmentCo.,LTD 3 1.Overview 1.1Scopeofapplication Thisrequirementspecifiestheantennatechnicalrequirementsandmaterialrequirementsspecificationsfor RK90products. Thisrequirementappliestotheselection,testingandacceptanceofRK90antennas. 1.2Projectbasicinformation Antennaname: RK90 Antennafrequency: BT Antennamaterial:FPC 2.Technicalindexrequirements 2.2.1Introductionoftestitemsandequipment inventorytestitem equipment ActivetestTRP,TISIntegratedtester,microwavedarkroom 2.2.2Testinstructions Testtools:Agilent8960instrument,R&SCMW500,fullwavefarfieldETSdarkroom,highprecision positioningsystemanditscontrollerandcomputerwithautomatictestprogram Testenvironment:temperature22°C±3°C,humidity50%±15% Testmethod:DUTisfixedinthecenteroftheturntableonthesamehorizontallineasthecenterof thehornantenna. ThepositioningsystemenablestheDUTtorotateinthewholespheretosatisfythehigh-precision3D positioning.EachRFinstrumentandturntablecontrollercommunicatewiththePCwithautomatictestsoftware throughtheGPIBinterface. ShenzhenYushengCommunicationEquipmentCo.,LTD 4 2.2.3Passiveantennaparameter Freq (MHz) Effi (%) Gain (dBi) 2400 4.3-14.4 2410 4.9-14.2 2420 5.3-13.8 2430 5.9-13.3 2440 6.5-12.7 2450 7.1-12.3 2460 6.6-12.8 2470 6.2-13.1 2480 5.4-13.6 ShenzhenYushengCommunicationEquipmentCo.,LTD 5 2.2.4BTAppleChart/DirectionChart-Arm 2.2.5Antennaloadingcoil-BT ShenzhenYushengCommunicationEquipmentCo.,LTD 6 2.2.6Testimage ShenzhenYushengCommunicationEquipmentCo.,LTD 7 3.Engineeringdrawing 3.1FPCantenna ShenzhenYushengCommunicationEquipmentCo.,LTD 8 4.BillofMaterials ShenzhenYushengCommunicationEquipmentCo.,LTD 9 5.Packagedrawing Packagingmethoddiagram productname FPCantenna P/N 647006 Project model RK9 0 Filedetails CartonSize1: 270*260*200MM CartonSize2: 260*200*200MM CartonSize3: Dependingontheorder quantity/volume BoatingmethodPackagingbyorderquantity Totalnumberof binning Packagingbyorderquantity labeling requirement TagSize1: Universaluse100* 100mm TagSize2: Accordingto customer requirements mattersneedattention 1.Duetothelimitationoforderquantity,thepackingmethodofeachmaterialisthesizeoftheboxaccording tothetotalquantityoftheorderorthephysicalvolume 2.Storagetemperature:roomtemperature 3.Preservationconditions:storetheminacoolanddryplace
Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com TEST REPORT FCC ID. ............................ : 2BB8P-REEBOKSTRIDE Test Report No. ............... : TCT251113E052 Date of issue ................... : Dec. 19, 2025 Testing laboratory .......... : SHENZHEN TONGCE TESTING LAB Testing location/ address: 2101 & 2201, Zhenchang Factory, Renshan Industrial Zone, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, 518103, People's Republic of China Applicant's name ............ : CE BRANDS INTERNATIONAL INC. Address ........................... : 1400, 350-7 Avenue SW, Calgary, Alberta, T2P3N9, Canada Manufacturer's name ... : BEIJING KANGSHUO INFORMATION TECHNOLOGY Co., Ltd Address ........................... : Room 101, 3rd Floor, Building 3, Yard 33, Zique Road, Haidian District, Beijing, CHINA.100085 Standard(s) ..................... : FCC CFR Title 47 Part 15 Subpart C Section 15.247 FCC KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10:2020 Product Name ................. : Smart Watch Trade Mark ...................... : Reebok Model/Type reference..... : Reebok Stride Rating(s).......................... : Rechargeable Li-ion Battery DC 3.8V Date of receipt of test item ......................................... : Nov. 13, 2025 Date (s) of performance of test ................................... : Nov. 13, 2025 ~ Dec. 19, 2025 Tested by (+signature) ... : Yannie ZHONG Check by (+signature) .... : Beryl ZHAO Approved by (+signature): Tomsin General disclaimer: This report shall not be reproduced except in full, without the written approval of SHENZHEN TONGCE TESTING LAB. This document may be altered or revised by SHENZHEN TONGCE TESTING LAB personnel only, and shall be noted in the revision section of the document. The test results in the report only apply to the tested sample. Report No.: TCT251113E052 Page 2 of 86 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Table of Contents 1. General Product Information .................................................................. 3 1.1. EUT description ..................................................................................................... 3 1.2. Model(s) list ............................................................................................................ 3 1.3. Operation Frequency ............................................................................................ 3 2. Test Result Summary .............................................................................. 4 3. General Information ................................................................................. 5 3.1. Test environment and mode ................................................................................. 5 3.2. Description of Support Units ................................................................................ 5 4. Facilities and Accreditations .................................................................. 6 4.1. Facilities ................................................................................................................. 6 4.2. Location ................................................................................................................. 6 5. Measurement Uncertainty ....................................................................... 6 6. Test Results and Measurement Data ..................................................... 7 6.1. Antenna requirement ............................................................................................ 7 6.2. Conducted Emission ............................................................................................. 8 6.3. Conducted Output Power ................................................................................... 12 6.4. 20dB Occupy Bandwidth .................................................................................... 13 6.5. Carrier Frequencies Separation ......................................................................... 14 6.6. Hopping Channel Number .................................................................................. 15 6.7. Dwell Time ............................................................................................................ 16 6.8. Pseudorandom Frequency Hopping Sequence ................................................ 17 6.9. Conducted Band Edge Measurement ................................................................ 18 6.10.Conducted Spurious Emission Measurement .................................................. 19 6.11.Radiated Spurious Emission Measurement ..................................................... 20 Appendix A: Test Result of Conducted Test Appendix B: Photographs of Test Setup Appendix C: Photographs of EUT Report No.: TCT251113E052 Page 3 of 86 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com 1. General Product Information 1.1. EUT description Product Name ....................... : Smart Watch Model/Type reference........... : Reebok Stride Sample Number....................: TCT251113E052-0101 Bluetooth Version ................ : V5.0 (This report is for BDR+EDR) Operation Frequency ........... : 2402MHz~2480MHz Transfer Rate ........................ : 1/2/3 Mbits/s Number of Channel .............. : 79 Modulation Type ................... : GFSK, π/4-DQPSK, 8DPSK Modulation Technology ....... : FHSS Antenna Type ........................ : FPC Antenna Antenna Gain ........................ : -12.3dBi Rating(s)................................ : Rechargeable Li-ion Battery DC 3.8V Note: The antenna gain listed in this report is provided by applicant, and the test laboratory is not responsible for this parameter. 1.2. Model(s) list None. 1.3. Operation Frequency Channel Frequency Channel Frequency Channel Frequency Channel Frequency 0 2402MHz 20 2422MHz 40 2442MHz 60 2462MHz 1 2403MHz 21 2423MHz 41 2443MHz 61 2463MHz ... ... ... ... ... ...…
Text truncated - open the document above for the full version.
3722 Illinois Avenue · Saint Charles, Illinois, 60174 · United States
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 2.70 mW |

Vitalist Health Band
Equipment Class
DSS - Part 15 Spread Spectrum TransmitterSmart Watch
Equipment Class
DTS - Digital Transmission System
Smart watch
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter