2BBBN-F7NPV08Dash Cam

Hangzhou Tanlink Technology Co.,Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 [March 16, 2026] U.S. Agent Designation [Hangzhou Tanlink Technology Co.,Ltd.] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought FCC ID: 2BBBN-F7NPV08 Name and company of U.S. agent: [GLOCERTS TECHNOLOGY INC] Physical U.S. address of agent: [19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507] FRN of U.S. agent: [0036339737] Email address of U.S. agent: [[email protected]] Telephone of U.S.agent: (626) 588-8039 [GLOCERTS TECHNOLOGY INC] acknowledges their obligation to accept service of process on behalf of [Hangzhou Tanlink Technology Co.,Ltd.]. [Hangzhou Tanlink Technology Co.,Ltd.] with the FRN [0033808502] accepts its obligation to maintain an agent for service of process in the United States for no less than 1 year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Signature [Carrie Lian] [Huiying Fan] [CEO] [Director] [Hangzhou Tanlink Technology Co.,Ltd.] [GLOCERTS TECHNOLOGY INC]

Hangzhou Tanlink Technology Co.,Ltd. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Hangzhou Tanlink Technology Co.,Ltd. Address: Room 701, South Building, Building 3, No. 16 Longtan Road, Cangqian Street, Yuhang District, Hangzhou, Zhejiang, China Product Name: Dash Cam FCC ID: 2BBBN-F7NPV08 Model(s): F7NP V08 2.911(d)(5)(i) Equipment Type We, [Hangzhou Tanlink Technology Co.,Ltd.] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Carrie Lian Date: 2026.03.11 Title and Company name: CEO / Hangzhou Tanlink Technology Co.,Ltd. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Hangzhou Tanlink Technology Co.,Ltd. 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Hangzhou Tanlink Technology Co.,Ltd. Address: Room 701, South Building, Building 3, No. 16 Longtan Road, Cangqian Street, Yuhang District, Hangzhou, Zhejiang, China Product Name: Dash Cam FCC ID: 2BBBN-F7NPV08 Model(s): F7NP V08 2.911(d)(5)(ii) Applicant filing We, [Hangzhou Tanlink Technology Co.,Ltd.] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Carrie Lian Date: 2026.03.11 Title and Company name: CEO / Hangzhou Tanlink Technology Co.,Ltd. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

FCC Software Configuration Control Declaration Rev1.1 Hangzhou Tanlink Technology Co.,Ltd. FCC Software Configuration Control Declaration Date: 2026.03.11 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: Dash Cam / F7NP V08 Regarding FCC Country Code Selection guidelines identified in KDB 594280. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Carrie Lian Date: 2026.03.11 Title: CEO Signatureof applicant

Hangzhou Tanlink Technology Co.,Ltd. Agent Authorization Company: Hangzhou Tanlink Technology Co.,Ltd. Address: Room 701, South Building, Building 3, No. 16 Longtan Road, Cangqian Street, Yuhang District, Hangzhou, Zhejiang, China Product Name: Dash Cam Model Number(s): F7NP V08 Product Description: Dash Cam We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: March 11, 2026 Name: Carrie Lian Title: CEO Company: Hangzhou Tanlink Technology Co.,Ltd.

Hangzhou Tanlink Technology Co.,Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: March 11, 2026 Subject; Request for Confidentiality FCC ID: 2BBBN-F7NPV08 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description FCC Software Security Requirements for UNII devices Rev 2.1 In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Carrie Lian Title: CEO

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 5 Model: F7NP V08 External Photos Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 5 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 5 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 4 of 5 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 5 of 5

FCC ID LABEL: Label Location:

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 5 Model: F7NP V08 Internal Photos Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 5 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 5 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 4 of 5 ANT Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 5 of 5

FCC §15.247 (i), §2.1091 – RF Exposure FCC ID: 2BBBN-F7NPV08 Applied procedures / limit According to FCC §15.247(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Note: ƒ is frequency in MHz * = Power density limit is applicable at frequencies greater than 100 MHz Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz * = Plane-wave equivalent power density MPE PREDICTION Predication of MPE limit at a given distance, Equation from OET Bulletin 65, Edition 97-01 Where: S = power density P = power input to antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna,R=20cm Test Result of RF Exposure Evaluation Modes& Channel Freq. (MHz) Tune up Produce power Maximu m peak output power (dBm) Output power to antenna (mW) Antenna Gain (numeric) Power Density (S) (mW/ cm2) Limit (mW / cm2 ) Result 2.4G WIFI 802.11b&2 437 16±1 17 50.1187 0.7447 (-1.28dBi) 0.0074 1 Pass 5.8GWIFI 802.11ax2 0&5825 18±1 19 79.4328 1.5586 (1.93dBi) 0.0247 1 Pass

Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 51 TEST REPORT Compiled by: Reviewed by: Approved by: Kai Chen Martin Feng Bin Mei / Director Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Test item description: Dash Cam FCC ID: 2BBBN-F7NPV08 Trademark(s): REDTIGER Model/Type reference: F7NP V08 Applicant’s name: Hangzhou Tanlink Technology Co., Ltd. Address: Room 701, South Building, Building C, Tianshi Science and TechnologyInnovation Park, No. 16 Longtan Road, Cangqian Street, Yuhang District,Hangzhou City, Zhejiang, 310000 China Manufacturer: Hangzhou Tanlink Technology Co., Ltd. Address: Room 701, South Building, Building C, Tianshi Science and TechnologyInnovation Park, No. 16 Longtan Road, Cangqian Street, Yuhang District,Hangzhou City, Zhejiang, 310000 China Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: Jan. 28, 2026 Sample tested Date: Jan. 28, 2026 to Mar. 20, 2026 Issue Date: Mar. 20, 2026 Report No.: CTB26012806407RF02 Test Standards FCC CFR Title 47 Part 15 Subpart E Section 15.407 KDB 789033 V02r01 Test Results PASS Remark: This is WIFI-5GHz band radio test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB26012806407RF02 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 51 TABLE OF CONTENT Test Report Declaration Page 1.VERSION ........................................................................................................................................ 3 2.TEST SUMMARY ........................................................................................................................... 4 3.MEASUREMENT UNCERTAINTY ................................................................................................. 5 4.PRODUCT INFORMATION AND TEST SETUP ............................................................................ 6 4.1 Product Information .......................................................................................................................... 6 4.2 Test Setup Configuration .................................................................................................................. 6 4.3 Support Equipment........................................................................................................................... 6 4.5 Test Mode ........................................................................................................................................ 7 4.6 Test Environment ............................................................................................................................. 7 5.TEST FACILITY AND TEST INSTRUMENT USED ....................................................................... 8 5.1 Test Facility ...................................................................................................................................... 8 5.2 Test Instrument Used ....................................................................................................................... 8 6.AC POWER LINE CONDUCTED EMISSION ............................................................................... 10 6.1 Block Diagram Of Test Setup ......................................................................................................... 10 6.2 Limit ................................................................................................................................................ 10 6.3 Test procedure ............................................................................................................................... 10 6.4 Test Result ..................................................................................................................................... 12 7.RADIATED SPURIOUS EMISSIONS ........................................................................................... 13 7.1 Block Diagram Of Test Setup ......................................................................................................... 13 7.2 Limit ................................................................................................................................................ 13 7.3 Test procedure ............................................................................................................................... 14 7.4 Test Result ..................................................................................................................................... 15 8.BAND EDGE ................................................................................................................................ 21 8.1 Block Diagram Of Test Setup ......................................................................................................... 21 8.2 Limit ................................................................................................................................................ 21 8.3 Test procedure ............................................................................................................................... 21 8.4 Test Result ..................................................................................................................................... 22 9.CONDUCTED OUTPUT POWER .............................................…

Text truncated - open the document above for the full version.

专业的RF研发机构 Shenzhen Anchuang Zhilian Electronics Co., LTD Address: 5F, 5th Floor, Building L, Baicai Science and Technology Park, No. 26, Lane 2, Liuxian 1st Road, Bao'an District, Shenzhen project information custom：JarvisProject - Motherboa rd F7NP V08date2026.2.7 Frequency band 2400-2500 5100-5800 Antenna Structure FPC+0.81*50mm black coaxial cable + second-generation terminal facing down RF Engineering 倪能召 Report version V1.0 SATIMOdarkroom test system testing environment testing environment testing environment ambient temperature ambient humidity Ambient air pressure directory 1、product drawing 2、matching circuit 3、test data product drawing matching circuit ElementValue E1(0402) E2(0402) E3(0402) No changes made to the original match Passive test data Frequency / MHzGain/ dBi Efficiency / % 2400-1.7825.59 2410-1.2429.11 2420-1.924.72 2430-2.124.32 2440-1.725.35 2450-1.8623.33 2460-1.2825.35 2470-0.926.06 2480-0.6826.61 2490-1.0423.39 2500-0.8725.94 51002.0934.59 51702.834.99 52403.0136.22 53103.2339.17 53802.5233.81 54502.2935.81 55201.6533.65 55901.0730.76 56601.5832.73 57301.9330.34 58001.8630.9 OTAtest data Band channelTRP(dBm)TIS（dBm） WIFI-A- (54M) 3613.08-70.04 Assembly drawing product structure diagram 專業的RF研發機構

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 1 Model: F7NP V08 Radiated Emission Below 1G Above 1G